☆ 4.7 Article

Oxidation behaviour of eutectic refractory high-entropy alloys at 800-1000 °C

CORROSION SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Oxidation behaviors of CrNb, CrNbTi, and CrNbTaTi concentrated refractory alloys

T. M. Butler et al.

Summary: CrNb, CrNbTi, and CrNbTaTi exhibited different oxidation behaviors at 1200 degrees C, with the addition of Ti and Ta affecting the microstructure and oxidation kinetics. The resulting multi-phase oxide structures were characterized using various analytical techniques and compared with modeling predictions using ab initio density functional theory (DFT).

INTERMETALLICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Y on the high-temperature oxidation behavior of CrMoTaTi refractory high entropy alloy

Yuhang Du et al.

Summary: The addition of reactive element Y can significantly improve the high-temperature oxidation resistance of CrMoTaTi high-entropy alloys, lowering the critical concentration of Cr required for the formation of Cr2O3 on the alloy surface. The Y-bearing RHEAs exhibited good oxidation resistance even when subjected to oxidation at 1000 degrees C for 100 hours, suggesting a positive role of reactive elements in enhancing the oxidation resistance of RHEAs.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Unique precipitations in a novel refractory Nb-Mo-Ti-Co high-entropy superalloy

N. Yurchenko et al.

Summary: This study introduces a new refractory high-entropy superalloy RHESA, which shows improved application prospects at high temperatures by balancing the mechanical properties of various nanoprecipitates. The emergence of multi-type nanoprecipitates in the RHESA enhances the room-temperature compressive ductility without compromising the material strength, addressing a major issue of low stability of B2 dispersoids in current RHESAs at temperatures above 700 degrees Celsius.

MATERIALS RESEARCH LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Effects of V content on the microstructure and mechanical properties of Nb31Ti37-xZr26Al6Vx refractory medium-entropy alloys

R. Huang et al.

Summary: In this study, a series of refractory medium-entropy alloys with excellent plasticity were designed and prepared using phase diagram calculation software. The synergistic effects of V and Ti on the microstructure, mechanical properties, and strengthening mechanisms of these alloys were investigated. The results showed that careful composition design can result in high-strength alloys with excellent plasticity.

INTERMETALLICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of lightweight AlxCrNbTiV(x=0.2, 0.5, 0.8) refractory high entropy alloys

Lou Li-Yan et al.

Summary: A novel lightweight refractory high entropy alloys AlxCrNbTiV have been prepared by vacuum arc melting. The alloys exhibit a BCC phase with significant dendrite structure and a low density. The addition of Al enhances the hardness of the alloys. Al0.2CrNbTiV alloy shows a good combination of strength and ductility at room temperature, while Al0.5CrNbTiV and Al0.8CrNbTiV alloys exhibit typical brittle behavior. The hot compression process activates both DDRX and CDRX, resulting in softening and increased ductility of the alloys. The theoretical yield stress of AlxCrNbTiV is calculated, indicating that the degree of solid solution affects the accuracy of estimation.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

On the yield stress anomaly in a B2-ordered refractory AlNbTiVZr0.25 high-entropy alloy

N. Yurchenko et al.

Summary: High-entropy intermetallics show great potential for high-temperature applications, but there is limited information on their plastic flow behavior and deformation mechanisms. A yield strength anomaly was observed in a refractory AlNbTiVZr0.25 high-entropy alloy during compression tests, possibly connected to the glide of dissociated a (111) superdislocations.

MATERIALS LETTERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High-temperature ultra-strength of dual-phase Re0.5 MoNbW(TaC)0.5 high-entropy alloy matrix composite

Qinqin Wei et al.

Summary: The dual-phase Re0.5MoNbW(TaC)(0.5) composite, synthesized by arc melting, exhibited remarkably high-temperature strength with a yield strength of approximately 901 MPa and a true ultimate compressive strength of around 1186 MPa at 1200 degrees C. The semi-coherent interface between the BCC phase and carbide, along with dipolar dislocation walls in the BCC phase and restricted dynamic interaction between defects in the carbide, provided effective strengthening effects.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Mechanics

Design and Characterization of Al-Cr-Nb-Ti-V-Zr High-Entropy Alloys for High-Temperature Applications

N. Yu Yurchenko et al.

Summary: High-entropy alloys (HEAs) are a new class of metallic alloys without a principal component, offering unique structures and properties for potential high-temperature applications. Research shows that the strength and ductility of these alloys have a complex relationship with composition, phase order, and secondary phase content.

PHYSICAL MESOMECHANICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A novel light-weight refractory high-entropy alloy with high specific strength and intrinsic deformability

X. W. Liu et al.

Summary: AlNb2TiV is a novel light-weight refractory high-entropy alloy with high specific strength and excellent room-temperature deformability. It has a dendritic microstructure with an ordered B2 phase, low density, and excellent specific yield strength and deformability, with slip occurring through glide of 1/2 < 1 1 1 > dislocations. The Ti/Nb ratio of the alloy falls within the optimal range for easy dislocation motion and good deformability.

MATERIALS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Refractory high entropy alloy with ductile intermetallic B2 matrix / hard bcc particles and exceptional strain hardening capacity

Nikita Yurchenko et al.

Summary: A new Nb30Mo30Hf20Co20 (at. %) refractory high entropy alloy with a B2 matrix and bcc particles was introduced in this study. The complex deformation behavior of the phases resulted in extraordinary high strain hardening capacity at 22-600 degrees C, surpassing other RHEAs, and providing new opportunities for developing high-performance alloys for high-temperature applications.

MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation mechanism of refractory high entropy alloys Ta-Mo-Cr-Ti-Al with varying Ta content

S. Schellert et al.

Summary: The oxidation resistance of alloys Ta-x-(Mo-Cr-Ti-Al)(1-x) in air at 1200 degrees C is improved with increasing Ta concentration. However, alloys with Ta concentrations less than or equal to 10 at% exhibit poor oxidation behavior. Protective CrTaO4 scales are found in alloys containing 15 and 20 at% Ta.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of micro arc oxidation on high temperature oxidation resistance of AlTiCrVZr refractory high entropy alloy

Xiaoqian Shi et al.

Summary: The micro arc oxidation (MAO) coatings were prepared on AlTiCrVZr high entropy alloy in different electrolytes to improve its high temperature oxidation resistance. The MAO coating with a combination of Na2SiO3, (NaPO3) 6, NaOH, Na2B4O7, and KF showed the best performance, forming smooth and dense coating containing oxides like Al2O3, Cr2O3, SiO2, ZrO2, and TiO2. After 20 hours of oxidation, this specific MAO coating exhibited superior high temperature oxidation resistance compared to uncoated substrate.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Design and characterization of eutectic refractory high entropy alloys

N. Yurchenko et al.

Summary: Eutectic alloys with near-equilibrium structures, impressive strength-ductility trade-off, and perfect castability were designed using a CALPHAD approach. Alloying with Cr and Al induced the formation of hypoeutectic, eutectic, and hypereutectic structures due to Laves phase precipitation, improving the mechanical characteristics of the alloys. The stable B2/C14 Laves phase microstructure after plastic deformation at high temperatures and the precipitation of a new D0(19) structured phase were observed, indicating new approaches for designing RHEAs with promising mechanical properties.

MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A new strategy to intrinsically protect refractory metal based alloys at ultra high temperatures

Bronislava Gorr et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Oxidation behaviour of a novel refractory high entropy alloy at elevated temperatures

Kai-Chi Lo et al.

INTERMETALLICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Structure and mechanical properties of an in situ refractory Al20Cr10Nb15Ti20V25Zr10 high entropy alloy composite

N. Yurchenko et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Combinatorial synthesis and analysis of AlxTayVz-Cr20Mo20Nb20Ti20Zr10 and Al10CrMoxNbTiZr10 refractory high-entropy alloys: Oxidation behavior

Owais Ahmed Waseem et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical properties of a novel CrNbTiZrAlx (0.25 ≤ x ≤ 1.25) eutectic refractory high-entropy alloy

Man Zhu et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation response of a vacuum arc melted NbZrTiCrAl refractory high entropy alloy at 800-1200 °C

Ping Zhang et al.

VACUUM (2019)

Add to Collection

Article Materials Science, Multidisciplinary

The role of Nb on the high temperature oxidation behavior of CoCrFeMnNbxNi high-entropy alloys

Dong Huang et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation Resistance of Ti-Al-Cr-Nb-Based High-Entropy Alloys in Air at 1073 K

Richard Gawel et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

Add to Collection

Article Multidisciplinary Sciences

An oxidation resistant refractory high entropy alloy protected by CrTaO4-based oxide

Kai-Chi Lo et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

High temperature strength of refractory complex concentrated alloys

O. N. Senkov et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Chemistry, Physical

y Microstructures and mechanical properties of HfNbTaTiZrW and HfNbTaTiZrMoW refractory high-entropy alloys

Meng Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

On the oxidation mechanism of refractory high entropy alloys

Franz Mueller et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure evolution of a novel low-density Ti-Cr-Nb-V refractory high entropy alloy during cold rolling and subsequent annealing

N. Yu Yurchenko et al.

MATERIALS CHARACTERIZATION (2019)

Add to Collection

Article Chemistry, Physical

Microstructure, mechanical and thermal oxidation behavior of AlNbTiZr high entropy alloy

J. Jayaraj et al.

INTERMETALLICS (2018)

Add to Collection

Article Chemistry, Physical

Accelerated oxidation in ductile refractory high-entropy alloys

Saad Sheikh et al.

INTERMETALLICS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Magnetic properties and thermal stability of Ti-doped CrO2 films

Z. Zhang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Development and exploration of refractory high entropy alloys-A review

Oleg N. Senkov et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Article Chemistry, Physical

High temperature oxidation behaviors of equimolar NbTiZrV and NbTiZrCr refractory complex concentrated alloys (RCCAs)

T. M. Butler et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Precipitation-strengthened refractory Al0.5CrNbTi2V0.5 high entropy alloy

N. D. Stepanov et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Structure and mechanical properties of B2 ordered refractory AlNbTiVZrx (x=0-1.5) high-entropy alloys

N. Yu. Yurchenko et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Al content on structure and mechanical properties of the AlxCrNbTiVZr (x=0; 0.25; 0.5; 1) high-entropy alloys

N. Yu. Yurchenko et al.

MATERIALS CHARACTERIZATION (2016)

Add to Collection

Article Chemistry, Physical

Structure and mechanical properties of the AlCrxNbTiV (x=0, 0.5, 1, 1.5) high entropy alloys

N. D. Stepanov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy

N. D. Stepanov et al.

MATERIALS LETTERS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system

O. N. Senkov et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Chemistry, Physical

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2011)

Add to Collection

Article Chemistry, Physical

Refractory high-entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2010)

Add to Collection

Editorial Material Multidisciplinary Sciences

The Hotter the Engine, the Better

John H. Perepezko

SCIENCE (2009)

Add to Collection

Article Chemistry, Physical

Effect of Cr addition on oxidation behavior of Ti-48Al-2Ag alloys

Z Tang et al.

INTERMETALLICS (2003)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Surface chemistry of oxide scale on IN-738LC superalloy: Effect of long-term exposure in air at 1173 K

S Seal et al.

OXIDATION OF METALS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.