Related references
Note: Only part of the references are listed.Properties of pumice-fly ash based geopolymer paste
Maadh Abdulmuttaleb Hamid et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
An Overview of Pumice Stone as a Cementitious Material - the Best Manual for Civil Engineer
Alaa M. Rashad
SILICON (2021)
Effects of calcium aluminate cement on the acid resistance of metakaolin-based geopolymer
Linping Wu et al.
ADVANCES IN CEMENT RESEARCH (2021)
Fresh and hardened properties of geopolymer binder using ground high magnesium ferronickel slag with fly ash
Jhutan Chandra Kuri et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Valorization of fly ash as an additive for electric arc furnace slag geopolymer cement
Alaa M. Rashad et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Mechanical and Fracture Properties of Fly Ash Geopolymer Concrete Addictive with Calcium Aluminate Cement
Yamin Wang et al.
MATERIALS (2019)
Investigations on the properties of geopolymer mortar and concrete with mineral admixtures: A review
Bharat Bhushan Jindal
CONSTRUCTION AND BUILDING MATERIALS (2019)
Optimization of production parameters of geopolymer mortar and concrete: A comprehensive experimental study
Fatih Kantarci et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Alkali-activated materials
John L. Provis
CEMENT AND CONCRETE RESEARCH (2018)
Natural pozzolan based geopolymers: A review on mechanical, microstructural and durability characteristics
Rafia Firdous et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of calcium aluminate cement on geopolymer concrete cured at ambient temperature
Yi-Fang Cao et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Acid attack on geopolymer cement mortar based on waste-glass powder and calcium aluminate cement at mild concentration
Mostafa Vafaei et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Volcanic ash-based geopolymer cements/concretes: the current state of the art and perspectives
Jean Noel Yankwa Djobo et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)
High strength geopolymer binder based on waste-glass powder
Mostafa Vafaei et al.
ADVANCED POWDER TECHNOLOGY (2017)
Influence of calcium aluminate cement (CAC) on alkaline activation of red clay brick waste (RCBW)
L. Reig et al.
CEMENT & CONCRETE COMPOSITES (2016)
Mechanical properties and durability of volcanic ash based geopolymer mortars
Jean Noel Yankwa Djobo et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
The effect of type and concentration of activators on flowability and compressive strength of natural pozzolan and slag-based geopolymers
Mohsen Jafari Nadoushan et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Production of geopolymer concrete using natural pozzolan: A parametric study
Rami H. Haddad et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Influence of calcium aluminate cement on geopolymerization of natural pozzolan
Mostafa Vafaei et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties
Jean Noel Yankwa Djobo et al.
RSC ADVANCES (2016)
The effects of silica modulus and aging on compressive strength of pumice-based geopolymer composites
Mehrzad Mohabbi Yadollahi et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Properties of concrete with pumice powder and fly ash as cement replacement materials
Nihat Kabay et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Characterization of natural pozzolan-based geopolymeric binders
Juhyuk Moon et al.
CEMENT & CONCRETE COMPOSITES (2014)
Influence of the chemical and mineralogical composition on the reactivity of volcanic ashes during alkali activation
Patrick N. Lemougna et al.
CERAMICS INTERNATIONAL (2014)
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Utilization of volcanic ashes for the production of geopolymers cured at ambient temperature
H. K. Tchakoute et al.
CEMENT & CONCRETE COMPOSITES (2013)
Synthesis of volcanic ash-based geopolymer mortars by fusion method: Effects of adding metakaolin to fused volcanic ash
H. Tchakoute Kouamo et al.
CERAMICS INTERNATIONAL (2013)
A state-of-the-art review on roughness quantification methods for concrete surfaces
Pedro M. D. Santos et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Influence of the activating solution composition on the stability and thermo-mechanical properties of inorganic polymers (geopolymers) from volcanic ash
Patrick N. Lemougna et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
SEM-EDX and XRD characterization of zeolite NaA, synthesized from rice husk and aluminium scrap by different procedures for preparation of the initial hydrogel
Annie Shoumkova et al.
JOURNAL OF POROUS MATERIALS (2013)
Influence of synthesis parameters on NaA zeolite crystals
Liu Xing-dong et al.
POWDER TECHNOLOGY (2013)
Efflorescence control in geopolymer binders based on natural pozzolan
Ebrahim Najafi Kani et al.
CEMENT & CONCRETE COMPOSITES (2012)
Effect of type, form, and dosage of activators on strength of alkali-activated natural pozzolans
Dali Bondar et al.
CEMENT & CONCRETE COMPOSITES (2011)
Effect of heat treatment on reactivity-strength of alkali-activated natural pozzolans
Dali Bondar et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice
Nicolas Ali Libre et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Compressive strength and microstructural characteristics of class C fly ash geopolymer
Xiaolu Guo et al.
CEMENT & CONCRETE COMPOSITES (2010)
A review: The comparison between alkali-activated slag (Si plus Ca) and metakaolin (Si plus Al) cements
Chao Li et al.
CEMENT AND CONCRETE RESEARCH (2010)
Geopolymer synthesis using alkaline activation of natural zeolite
C. Villa et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Thermal insulating foamy geopolymers from perlite
V. Vaou et al.
MINERALS ENGINEERING (2010)
Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
J. Temuujin et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Effects of curing time and temperature on strength development of inorganic polymeric binder based on natural pozzolan
Ebrahim Najafi Kani et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Alkaline activation of blends of metakaolin and calcium aluminate
Ana Fernandez-Jimenez et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Geopolymer technology:: the current state of the art
P. Duxson et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Fly ash-based geopolymer concrete
D. Hardjito et al.
AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2005)
Properties of volcanic pumice based cement and lightweight concrete
KMA Hossain
CEMENT AND CONCRETE RESEARCH (2004)
The effects of different cement dosages, slumps, and pumice aggregate ratios on the thermal conductivity and density of concrete
H Uysal et al.
CEMENT AND CONCRETE RESEARCH (2004)
Geopolymerisation of multiple minerals
H Xu et al.
MINERALS ENGINEERING (2002)
Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers
VFF Barbosa et al.
INTERNATIONAL JOURNAL OF INORGANIC MATERIALS (2000)
Share Paper
