4.7 Article

Mechanical properties and microstructure of circulating fluidized bed fly ash and red mud-based geopolymer

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Effects of pre-setting chemical exchanges on geopolymers cast in saline waters

Xiaonan Ge et al.

Summary: This study investigated the effects of pre-setting chemical exchanges on the mechanical and chemical properties of geopolymers cast and cured in saline solutions of different concentrations. Results showed that the influence of salinity and Na/Al ratio on mechanical properties varied, and there exists a critical Na/Al ratio for the highest mechanical strength of geopolymers cast in saline waters. Excessive Na+ cations diffused into the geopolymer slurry may be detrimental to strength development.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Effects of initial SiO2/Al2O3 molar ratio and slag on fly ash-based ambient cured geopolymer properties

Ayoub Dehghani et al.

Summary: This paper discusses the impact of SiO2/Al2O3 ratio and replacement materials on the properties of fly ash-based geopolymers. Results show that increasing the SiO2/Al2O3 ratio accelerates the setting of geopolymer systems but may lead to a peak and subsequent decrease in compressive strength. Furthermore, reducing the amount of replacement materials prolongs setting time and significantly reduces compressive strength.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Effects of Na/Al ratio on mechanical properties and microstructure of red mud-coal metakaolin geopolymer

Jianping Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Characteristics of underwater cast and cured geopolymers

Xiaonan Ge et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Construction & Building Technology

Role of Fe species in geopolymer synthesized from alkali-thermal pretreated Fe-rich Bayer red mud

Yong Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Materials Science, Ceramics

Autogenous and drying shrinkage of alkali-activated slag mortars

Xiang Hu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Construction & Building Technology

Freeze-thaw durability of red mud slurry-class F fly ash-based geopolymer: Effect of curing conditions

Mengxuan Zhao et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Green & Sustainable Science & Technology

Mechanical and microstructural characterization of geopolymers derived from red mud and fly ashes

Wei Hu et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Green & Sustainable Science & Technology

Red mud-based geopolymers with tailored alkali diffusion properties and pH buffering ability

Guilherme Ascensao et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Construction & Building Technology

Transformations of Na, Al, Si and Fe species in red mud during synthesis of one-part geopolymers

Nan Ye et al.

CEMENT AND CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Comparison of red mud and coal gangue blended geopolymers synthesized through thermal activation and mechanical grinding preactivation

JunJun Geng et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Materials Science, Ceramics

Evolution of structural characteristics and compressive strength in red mud-metakaolin based geopolymer systems

Kardelen Kaya et al.

CERAMICS INTERNATIONAL (2016)

Article Construction & Building Technology

Synthesis and strength optimization of one-part geopolymer based on red mud

Nan Ye et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Compressive strength of one-part alkali activated fly ash using red mud as alkali supplier

H. Choo et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Strength properties of geopolymers derived from original and desulfurized red mud cured at ambient temperature

Qingke Nie et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Durability of red mud-fly ash based geopolymer and leaching behavior of heavy metals in sulfuric acid solutions and deionized water

Mo Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Engineering, Environmental

Assessing the Legacy of Red Mud Pollution in a Shallow Freshwater Lake: Arsenic Accumulation and Speciation in Macrophytes

Justyna P. Olszewska et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Article Engineering, Environmental

Co-disposal of MSWI fly ash and Bayer red mud using an one-part geopolymeric system

Nan Ye et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Article Engineering, Environmental

Stabilization/solidification of fly ash from fluidized bed combustion of recovered fuel and biofuel using alkali activation and cement addition

Janne Pesonen et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2016)

Article Materials Science, Ceramics

One-Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends

Xinyuan Ke et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Article Construction & Building Technology

Characterizations of FBC/PCC fly ash geopolymeric composites

Prinya Chindaprasirt et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Materials Science, Ceramics

Synthesis and Characterization of Geopolymer from Bayer Red Mud with Thermal Pretreatment

Nan Ye et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Article Construction & Building Technology

Synthesis and characterization of red mud and rice husk ash-based geopolymer composites

Jian He et al.

CEMENT & CONCRETE COMPOSITES (2013)

Review Construction & Building Technology

The morphology of C-S-H: Lessons from 1H nuclear magnetic resonance relaxometry

A. Valori et al.

CEMENT AND CONCRETE RESEARCH (2013)

Article Construction & Building Technology

Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization

Anuj Kumar et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Materials Science, Multidisciplinary

Composition and technological properties of geopolymers based on metakaolin and red mud

W. Hajjaji et al.

MATERIALS & DESIGN (2013)

Article Construction & Building Technology

Characterisation of class F fly ash geopolymer pastes immersed in acid and alkaline solutions

J. Temuujin et al.

CEMENT & CONCRETE COMPOSITES (2011)

Article Engineering, Environmental

Effect of fly ash preliminary calcination on the properties of geopolymer

J. Temuujin et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Article Engineering, Environmental

Comparative study on the characteristics of fly ash and bottom ash geopolymers

Prinya Chindaprasirt et al.

WASTE MANAGEMENT (2009)

Article Engineering, Industrial

Preparation of geopolymer from fluidized bed combustion bottom ash

R. Slavik et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Article Engineering, Environmental

Coal fly ash as raw material for the manufacture of geopolymer-based products

S. Andini et al.

WASTE MANAGEMENT (2008)

Article Chemistry, Applied

Alkali activation of fly ash:: Effect of the SiO2/Na2O ratio Part I:: FTIR study

M. Criado et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2007)

Article Materials Science, Multidisciplinary

Geopolymerisation of low calcium ferronickel slags

K. Komnitsas et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Article Construction & Building Technology

Geopolymeric materials prepared using Class F fly ash and elevated temperature curing

T Bakharev

CEMENT AND CONCRETE RESEARCH (2005)

Article Chemistry, Physical

The effects of inorganic salt contamination on the strength and durability of geopolymers

WKW Lee et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2002)