4.7 Article

Effect of partial substitution of cement with Dolomite powder on Glass-Fiber-Reinforced mortar

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

The adhesive and functional properties of cementitious overlays modified with granite powder

Adrian Chajec et al.

Summary: This research focuses on the impact of granite powder on the adhesive properties of environmentally friendly cementitious overlays. The addition of granite powder improves the consistency and decreases water absorption of fresh overlays. It also allows for better adhesion between overlays and substrate and reduces porosity and water absorptivity of overlays. Wet curing conditions are found to have a positive influence on the properties of composites.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

Article Construction & Building Technology

Improving the bond between polypropylene fiber and cement matrix by nano calcium carbonate modification

Jianhang Feng et al.

Summary: Surface modification of polypropylene fibers using nano calcium carbonate can enhance their bond performance with cement matrix, improving the chemical bonding and bond strength of fiber/cement matrix interface.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Mathematics, Interdisciplinary Applications

COMPARISON OF FLY ASH, PVA FIBER, MGO AND SHRINKAGE-REDUCING ADMIXTURE ON THE FROST RESISTANCE OF FACE SLAB CONCRETE VIA PORE STRUCTURAL AND FRACTAL ANALYSIS

Lei Wang et al.

Summary: This study investigates the improvement of frost resistance of face slab concrete by adding fly ash, fiber, MgO, and shrinkage-reducing admixtures. The results suggest that the combination of PVA fiber and fly ash enhances compressive strength and tensile capacity, while MgO and SRA have a negative impact on the mechanical properties of concrete. Additionally, the frost resistance of concrete is closely related to air void parameters, pore structures, and Ds values.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2021)

Article Construction & Building Technology

Effect of alkali-resistant glass fiber and silica fume on mechanical and shrinkage properties of cement-based mortars

Haiming Chen et al.

Summary: The study found that adding alkali-resistant glass fiber and glass fiber powder to fiber-reinforced concrete can effectively improve the mechanical properties, especially in terms of flexural strength and mitigating mortar shrinkage. Furthermore, the addition of silica fume further enhances the mechanical properties of mortar, although it also increases the autogenous shrinkage and drying shrinkage of the mortar.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

The impact of natural and calcined zeolites on the mechanical and durability characteristics of glass fiber reinforced cement composites

Gokhan Kaplan et al.

Summary: This paper presents an experimental study on the effects of natural and calcined zeolites, as well as glass fibers, on the mechanical, transport, and durability properties of cementitious composites under wetting-drying and freeze-thaw cycles. The results show that mixtures with calcined zeolites performed better in terms of compressive and flexural strength at different curing ages compared to mixtures with natural zeolites.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Reaction mechanism of dolomite powder in Portland-dolomite cement

Jiangtao Xu et al.

Summary: This study aims to understand the reaction mechanism of dolomite powder in Portland-dolomite cement (PDC) better. The research showed that dolomite exhibited higher chemical reactivity than limestone with increasing curing temperature, resulting in a refined pore structure and higher long-term compressive strength of PDC compared to PLC. Dolomite reaction in PDC at 40 and 60 degrees C produced hydrotalcite and calcite at the expense of portlandite, leading to the decomposition of Al-bearing products.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Civil

Effect of glass powder & polypropylene fibers on compressive and flexural strengths, toughness and ductility of concrete: An environmental approach

Maedeh Orouji et al.

Summary: The study focuses on enhancing the performance of concrete by using glass powder and polypropylene fibers, concluding that the simultaneous use of 25% glass and 1.5% fibers can significantly increase the compressive and flexural strengths of concrete.

STRUCTURES (2021)

Article Construction & Building Technology

Recycling the waste dolomite powder with excellent consolidation properties: Sample synthesis, mechanical evaluation, and consolidation mechanism analysis

Weiqing Lin et al.

Summary: Alkali activation of waste dolomite powder is an important method for treating solid waste and producing green cementitious materials. The optimal preparation parameters significantly affect the performance of the samples, which exhibit excellent mechanical properties and heat resistance. This material provides a new choice for environmentally friendly green materials.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Effect of non-adsorbed superplasticizer molecules on fluidity of cement paste at low water-powder ratio

Kazuki Matsuzawa et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Study on the time-dependent mechanical properties of glass fiber reinforced cement (GRC) with fly ash or slag

Congmi Cheng et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Effect of dolomite powder on the hydration and properties of calcium sulfoaluminate cements with different gypsum contents

Jiangtao Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Mechanical and durability behaviour of concrete with granite waste dust as partial cement replacement under adverse exposure conditions

Saeid Ghorbani et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Chloride-binding capacity of hydrotalcite in cement pastes containing dolomite and metakaolin

Alisa Machner et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Performance of mortar and concrete incorporating granite sludge as cement replacement

Ahmed O. Mashaly et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

The usage of newly developed glass fibre in cement structure and their characterization

Arife Yurdakul et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Enhancement of low-cement self-compacting concrete with dolomite powder

Hoang-Anh Nguyen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Use of glass powder residue for the elaboration of eco-efficient cementitious materials

Loic Rodier et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Construction & Building Technology

Mechanical properties of lime-based mortars reinforced with plasma treated glass fibers

J. Trejbal

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Impact on mechanical properties of cement sand mortar containing waste granite powder

Lalit Kumar Gupta et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Utilisation of waste cardboard and Nano silica fume in the production of fibre cement board reinforced by glass fibres

Morteza Khorami et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Review Green & Sustainable Science & Technology

Recycling of dimensional stone waste in concrete: A review

Aditya Rana et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Construction & Building Technology

Degradation mechanisms of natural fiber in the matrix of cement composites

Jianqiang Wei et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Construction & Building Technology

Microstructure of interface between fibre and matrix in 10-year aged GRC modified by calcium sulfoaluminate cement

Meimei Song et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Construction & Building Technology

Reaction kinetics of dolomite and portlandite

Xinyu Zhang et al.

CEMENT AND CONCRETE RESEARCH (2014)

Article Construction & Building Technology

Effect of CaMg(CO3)2 on hydrate assemblages and mechanical properties of hydrated cement pastes at 40 °C and 60 °C

Maciej Zajac et al.

CEMENT AND CONCRETE RESEARCH (2014)

Article Construction & Building Technology

Experimental investigation on flexural toughness of hybrid fiber reinforced concrete (HFRC) containing metakaolin and pumice

Pantea Rashiddadash et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Thermodynamics

Application of calorimetry as a main tool in evaluation of the effect of carbonate additives on cement hydration

W. Nocun-Wczelik et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)

Article Construction & Building Technology

The origins of thixotropy of fresh cement pastes

N. Roussel et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Construction & Building Technology

Free and restrained early-age shrinkage of mortar: Influence of glass fiber, cellulose ether and EVA (ethylene-vinyl acetate)

A. Messan et al.

CEMENT & CONCRETE COMPOSITES (2011)

Article Construction & Building Technology

Recycled aggregate concrete produced with red granite dust as a partial cement replacement

S. A. Abukersh et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Construction & Building Technology

Dedolomitization in different alkaline media:: Application to Portland cement paste

E García et al.

CEMENT AND CONCRETE RESEARCH (2003)

Article Construction & Building Technology

Some characteristics of high strength fiber reinforced lightweight aggregate concrete

O Kayall et al.

CEMENT & CONCRETE COMPOSITES (2003)