Related references
Note: Only part of the references are listed.The fibrous shell approach for the simulation of composite draping with a relevant orientation of the normals
R. Bai et al.
COMPOSITE STRUCTURES (2022)
A review of numerical analyses and experimental characterization methods for forming of textile reinforcements
Biao Liang et al.
CHINESE JOURNAL OF AERONAUTICS (2021)
A combined experimental-numerical approach for permeability characterization of engineering textiles
Tim Schmidt et al.
POLYMER COMPOSITES (2021)
Experimental and numerical analysis of textile composite draping on a square box. Influence of the weave pattern
J. Huang et al.
COMPOSITE STRUCTURES (2021)
A macroscale finite element approach for simulating the bending behaviour of biaxial fabrics
F. Yu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Modelling defect formation in textiles during the double diaphragm forming process
Adam J. Thompson et al.
COMPOSITES PART B-ENGINEERING (2020)
Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components
Luise Kaerger et al.
COMPOSITE STRUCTURES (2018)
Identifying the distinct shear wrinkling behavior of woven composite preforms under bias extension and picture frame tests
A. Hosseini et al.
COMPOSITE STRUCTURES (2018)
Numerical forming of continuous fibre reinforced composite material: A review
Philippe Bussetta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations
P. Boisse et al.
COMPOSITES PART B-ENGINEERING (2018)
Experimental and Numerical Studies on Fiber Deformation and Formability in Thermoforming Process Using a Fast-Cure Carbon Prepreg: Effect of Stacking Sequence and Mold Geometry
Daeryeong Bae et al.
MATERIALS (2018)
Measurement and Analysis of Drapeability Effects of Warp-Knit NCF with a Standardised, Automated Testing Device
Mirko Christ et al.
APPLIED COMPOSITE MATERIALS (2017)
Curvature determination in the bending test of continuous fibre reinforcements
B. Liang et al.
STRAIN (2017)
The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review
P. Boisse et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2017)
Viscoelastic bending model for continuous fiber-reinforced thermoplastic composites in melt
U. Sachs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites
Dominik Doerr et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Modeling the mechanical properties of textile-reinforced composites with a near micro-scale approach
Oliver Doebrich et al.
COMPOSITE STRUCTURES (2016)
Development of an experimental bench to reproduce the tow buckling defect appearing during the complex shape forming of structural flax based woven composite reinforcements
C. Tephany et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Analyses of interaction mechanisms during forming of multilayer carbon woven fabrics for composite applications
Farbod Nosrat Nezami et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method
Lode Daelemans et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Multi-scale modelling of strongly heterogeneous 3D composite structures using spatial Voronoi tessellation
Bassam El Said et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture
Lisa M. Dangora et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints
S. Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Forming induced wrinkling of composite laminates with mixed ply material properties; an experimental study
P. Hallander et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Experimental and numerical analyses of manufacturing process of a composite square box part: Comparison between textile reinforcement forming and surface 3D weaving
Peng Wang et al.
COMPOSITES PART B-ENGINEERING (2015)
Thermo-Mechanical Behavior of Stretch-Broken Carbon Fiber and Thermoplastic Resin Composites During Manufacturing
Peng Wang et al.
POLYMER COMPOSITES (2015)
Models for shear properties/behavior of dry fibrous materials at various scales: a review
Elena Syerko et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)
Elastic properties prediction of a knitted composite with inlaid yarns subjected to stretching: A coupled semi-analytical model
Gilles Dusserre et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Formability analyses of uni-directional and textile reinforced thermoplastics
S. P. Haanappel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Decoupling the bending behavior and the membrane properties of finite shell elements for a correct description of the mechanical behavior of textiles with a laminate formulation
Oliver Doebrich et al.
JOURNAL OF INDUSTRIAL TEXTILES (2014)
Improved accuracy in the determination of flexural rigidity of textile fabrics by the Peirce cantilever test (ASTM D1388)
Nicolas Lammens et al.
TEXTILE RESEARCH JOURNAL (2014)
Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement
S. Allaoui et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2014)
Experimental and computational composite textile reinforcement forming: A review
Thomas Gereke et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
A new mechanism for the formation of ply wrinkles due to shear between plies
James S. Lightfoot et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Models of mechanical properties/behavior of dry fibrous materials at various scales in bending and tension: A review
Elena Syerko et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
A new method in fabric drape measurement and analysis of the drape formation process
Bidour Al-Gaadi et al.
TEXTILE RESEARCH JOURNAL (2012)
Modeling of high speed RTM injection with highly reactive resin with on-line mixing
M. Deleglise et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Validation of a non-orthogonal constitutive model for woven composite fabrics via hemispherical stamping simulation
Xiongqi Peng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses
P. Boisse et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Enhancement of strength and uniformity in unidirectionally arrayed chopped strands with angled slits
I. Taketa et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Experimental Study of Bending Behaviour of Reinforcements
E. de Bilbao et al.
EXPERIMENTAL MECHANICS (2010)
Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming
David Jauffres et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
A semi-discrete shell finite element for textile composite reinforcement forming simulation
N. Hamila et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2009)
Theoretical Modeling of Large Shear Deformation and Wrinkling of Plain Woven Composite
B. Zhu et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Full-field strain measurements in textile deformability studies
S. V. Lomov et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results
J. Cao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements
Jean Launay et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Predictive modelling for optimization of textile composite forming
H. Lin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Large deformation simulation of anisotropic material using an updated Lagrangian finite element method
R. H. W. ten Thije et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2007)
A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites
A. A. Skordos et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Model of shear of woven fabric and parametric description of shear resistance of glass woven reinforcements
SV Lomov et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
The use of kinematic drape modelling to inform the hand lay-up of complex composite components using woven reinforcements
SG Hancock et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Simulating the deformation mechanisms of knitted fabric composites
M. Duhovic et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Analysis of flexible bending behavior of woven preform using non-orthogonal constitutive equation
WR Yu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics
XQ Peng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments
P Harrison et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics
G Lebrun et al.
COMPOSITE STRUCTURES (2003)
An approach in modeling the temperature effect in thermo-stamping of woven composites
J Cao et al.
COMPOSITE STRUCTURES (2003)
Characterisation of material properties for draping of dry woven composite material
SB Sharma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Carbon composites based on multiaxial multiply stitched preforms. Part 2. KES-F characterisation of the deformability of the preforms at low loads
SV Lomov et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Modeling a fabric drape profile
WM Lo et al.
TEXTILE RESEARCH JOURNAL (2002)
Bias extension measurements on cross-plied unidirectional prepreg
K Potter
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Comprehensive drape modelling for moulding 3D textile preforms
P Potluri et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Drapability of dry textile fabrics for stampable thermoplastic preforms
O Rozant et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
Share Paper
