Related references
Note: Only part of the references are listed.Development of diesel surrogates for reproducing the effect of fuel properties on engine combustion and emissions using an optimized decoupling physical-chemical surrogate (DPCS) model
Yongfei Zhu et al.
FUEL (2022)
An experimental and kinetic modeling study of a four-component surrogate fuel for RP-3 kerosene
Yebing Mao et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)
Optimization of a diesel/natural gas dual fuel engine under different diesel substitution ratios
Jie Liu et al.
FUEL (2021)
CFD analysis of combustion and emission characteristics of primary reference fuels: from transient Diesel spray to heavy-duty engine
Qiyan Zhou et al.
FUEL (2021)
The feasibility study of single-hydrocarbylbenzene/n-heptane model diesel fuels for diesel characterization
Xiaoyu Guo et al.
FUEL (2021)
Understanding the antagonistic effect of methanol as a component in surrogate fuel models: A case study of methanol/n-heptane mixtures
Yingtao Wu et al.
COMBUSTION AND FLAME (2021)
Development of Multipurpose Skeletal Core Combustion Chemical Kinetic Mechanisms
Quan-De Wang et al.
ENERGY & FUELS (2021)
Reduction of large-scale chemical mechanisms using global sensitivity analysis on reaction class/sub-mechanism
Yachao Chang et al.
COMBUSTION AND FLAME (2020)
Development of a skeletal mechanism for tri-component diesel surrogate fuel: N-hexadecane/iso-cetane/1-methylnaphthalene
Yuanqi Bai et al.
FUEL (2020)
The autoignition of Heptamethylnonane at moderate-to-high temperatures and elevated pressures: Shock tube study and improved chemical kinetic model
Mohsin Raza et al.
FUEL (2020)
Experimental and modeling study of the autoignition characteristics of commercial diesel under engine-relevant conditions
Liang Yu et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)
A study on the low-to-intermediate temperature ignition delays of long chain branched paraffin: Iso-cetane
Liang Yu et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)
Experimental and kinetic modeling study of ignition characteristics of RP-3 kerosene over low-to-high temperature ranges in a heated rapid compression machine and a heated shock tube
Yebing Mao et al.
COMBUSTION AND FLAME (2019)
Exploration of chemical composition effects on the autoignition of two commercial diesels: Rapid compression machine experiments and model simulation
Liang Yu et al.
COMBUSTION AND FLAME (2019)
Autoignition of diesel/oxygen/nitrogen mixture under elevated temperature in a heated shock tube
Sixu Wang et al.
FUEL (2019)
A wide-range experimental and modeling study of oxidation and combustion of n-propylbenzene
Yue-Xi Liu et al.
COMBUSTION AND FLAME (2018)
A new methodology for diesel surrogate fuel formulation: Bridging fuel fundamental properties and real engine combustion characteristics
Yong Qian et al.
ENERGY (2018)
Efficient Approach for the Optimization of Skeletal Chemical Mechanisms with Multiobjective Genetic Algorithm
Bo Niu et al.
ENERGY & FUELS (2018)
Development of an optimization methodology for formulating both jet fuel and diesel fuel surrogates and their associated skeletal oxidation mechanisms
Wenbin Yu et al.
FUEL (2018)
Development of a Diesel Surrogate Fuel Library
Patrick G. Szymkowicz et al.
FUEL (2018)
Diesel boom, emissions bust
Adam Yeeles
NATURE CLIMATE CHANGE (2018)
Skeletal kinetic mechanism for diesel combustion
Alessio Frassoldati et al.
COMBUSTION THEORY AND MODELLING (2017)
Ignition characterization of F-76 and algae-derived HRD-76 at elevated temperatures and pressures
Daniel J. Valco et al.
COMBUSTION AND FLAME (2017)
Autoignition study of ULSD#2 and FD9A diesel blends
Goutham Kukkadapu et al.
COMBUSTION AND FLAME (2016)
Diesel Surrogate Fuels for Engine Testing and Chemical-Kinetic Modeling: Compositions and Properties (vol 30, pg 1445, 2016)
Charles J. Mueller et al.
ENERGY & FUELS (2016)
Development of multi-component diesel surrogate fuel models - Part II: Validation of the integrated mechanisms in 0-D kinetic and 2-D CFD spray combustion simulations
Hiew Mun Poon et al.
FUEL (2016)
Development of multi-component diesel surrogate fuel models - Part I: Validation of reduced mechanisms of diesel fuel constituents in 0-D kinetic simulations
Hiew Mun Poon et al.
FUEL (2016)
Development of a skeletal mechanism for diesel surrogate fuel by using a decoupling methodology
Yachao Chang et al.
COMBUSTION AND FLAME (2015)
Understanding the Relationship between Cetane Number and the Ignition Delay in Shock Tubes for Different Fuels Based on a Skeletal Primary Reference Fuel (n-Hexadecane/Iso-cetane) Mechanism
Weiwei Fan et al.
ENERGY & FUELS (2015)
Ignition delay times and chemical kinetics of diethoxymethane/O2/Ar mixtures
Changhua Zhang et al.
FUEL (2015)
A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications
Yuanjiang Pei et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2015)
A shock tube study of the autoignition characteristics of RP-3 jet fuel
Changhua Zhang et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)
Laminar flame propagation of atmospheric iso-cetane/air and decalin/air mixtures
Bo Li et al.
COMBUSTION AND FLAME (2014)
Importance of a Cycloalkane Functionality in the Oxidation of a Real Fuel
Stephen Dooley et al.
ENERGY & FUELS (2014)
A shock tube ignition delay study of conventional diesel fuel and hydroprocessed renewable diesel fuel from algal oil
Sandeep Gowdagiri et al.
FUEL (2014)
A reduced chemical kinetic mechanism of a diesel fuel surrogate (n-heptane/toluene) for HCCI combustion modelling
Juan J. Hernandez et al.
FUEL (2014)
Reduced Kinetic Schemes of Complex Reaction Systems: Fossil and Biomass-Derived Transportation Fuels
Eliseo Ranzi et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2014)
Diesel diffusion flame simulation using reduced n-heptane oxidation mechanism
Kesong Zhang et al.
APPLIED ENERGY (2013)
An advanced combustion model coupled with detailed chemical reaction mechanism for D.I diesel engine simulation
Amin Maghbouli et al.
APPLIED ENERGY (2013)
Development of an n-heptane-n-butanol-PAH mechanism and its application for combustion and soot prediction
Hu Wang et al.
COMBUSTION AND FLAME (2013)
Application of a Decoupling Methodology for Development of Skeletal Oxidation Mechanisms for Heavy n-Alkanes from n-Octane to n-Hexadecane
Yachao Chang et al.
ENERGY & FUELS (2013)
Kinetic Modeling Study of the Ignition Process of Homogeneous Charge Compression Ignition Engine Fueled with Three-Component Diesel Surrogate
Gan Xiao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
A Hierarchical and Comparative Kinetic Modeling Study of C1 - C2 Hydrocarbon and Oxygenated Fuels
Wayne K. Metcalfe et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2013)
Flame propagation of mixtures of air with high molecular weight neat hydrocarbons and practical jet and diesel fuels
Bo Li et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
Ignition delay times of low-vapor-pressure fuels measured using an aerosol shock tube
Daniel R. Haylett et al.
COMBUSTION AND FLAME (2012)
A high pressure shock tube study of n-propylbenzene oxidation and its comparison with n-butylbenzene
Daniel Darcy et al.
COMBUSTION AND FLAME (2012)
A combustion model for IC engine combustion simulations with multi-component fuels
Youngchul Ra et al.
COMBUSTION AND FLAME (2011)
Detailed chemical kinetic mechanism for surrogates of alternative jet fuels
Chitralkumar V. Naik et al.
COMBUSTION AND FLAME (2011)
Comprehensive chemical kinetic modeling of the oxidation of 2-methylalkanes from C7 to C20
S. M. Sarathy et al.
COMBUSTION AND FLAME (2011)
OH and C2H4 species time-histories during hexadecane and diesel ignition behind reflected shock waves
D. R. Haylett et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Measurements of laminar flame speeds of liquid fuels: Jet-A1, diesel, palm methyl esters and blends using particle imaging velocimetry (PIV)
Cheng Tung Chong et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Uncertainty driven theoretical kinetics studies for CH3OH ignition: HO2+CH3OH and O-2+CH3OH
Stephen J. Klippenstein et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Recent progress in the development of diesel surrogate fuels
William J. Pitz et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)
An experimental and kinetic modeling study of the autoignition of α-methylnaphthalene/air and α-methylnaphthalene/n-decane/air mixtures at elevated pressures
Haowei Wang et al.
COMBUSTION AND FLAME (2010)
Kinetics of Oxidation of Commercial and Surrogate Diesel Fuels in a Jet-Stirred Reactor: Experimental and Modeling Studies
H. P. Ramirez L et al.
ENERGY & FUELS (2010)
The autoignition of iso-cetane at high to moderate temperatures and elevated pressures: Shock tube experiments and kinetic modeling
Matthew A. Oehlschlaeger et al.
COMBUSTION AND FLAME (2009)
Application of an aerosol shock tube to the measurement of diesel ignition delay times
D. R. Haylett et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Detailed chemical kinetic models for the low-temperature combustion of hydrocarbons with application to gasoline and diesel fuel surrogates
F. Battin-Leclerc
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)
Development of a reduced n-heptane oxidation mechanism for HCCI combustion modeling
F. Maroteaux et al.
COMBUSTION AND FLAME (2006)
Wide-range kinetic modeling study of the pyrolysis, partial oxidation, and combustion of heavy n-alkanes
E Ranzi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
Development and calibration of a reduced chemical kinetic model of n-heptane for HCCI engine combustion
WH Su et al.
FUEL (2005)
Computational combustion
CK Westbrook et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2005)
A comprehensive modeling study of iso-octane oxidation
HJ Curran et al.
COMBUSTION AND FLAME (2002)
The gas-phase oxidation of n-hexadecane
R Fournet et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2001)
The oxidation of n-hexadecane: Experimental and detailed kinetic modeling
A Ristori et al.
COMBUSTION AND FLAME (2001)