4.7 Review

Carbon-based photocatalysts for hydrogen production: A review

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Photocatalytic degradation of Penicillin G in aqueous solutions: Kinetic, degradation pathway, and microbioassays assessment

Mohammed Berkani et al.

Summary: The study investigated the photocatalytic degradation of pharmaceutical micropollutants of Penicillin G at a laboratory scale, with promising results in terms of efficiency enhancement by persulfate sodium. Various analytical methods were employed to identify the degradation mechanism, and the safety of the degradation products was confirmed through microbial toxicity assessment with selected bacterial strains.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

High-efficiency electrochemical degradation of phenol in aqueous solutions using Ni-PPy and Cu-PPy composite materials

Lamria Seid et al.

Summary: This study successfully synthesized conductive crystalline polypyrrole and examined the degradation of phenol using copper-polypyrole as electrode material, demonstrating that doped Cu-PPy electrodes exhibit high electrochemical oxidation ability for phenol degradation.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Biohydrogen production from furniture waste via catalytic gasification in air over Ni-loaded Ultra-stable Y-type zeolite

Soheil Valizadeh et al.

Summary: This study investigated the air gasification of furniture waste using nickel-loaded ultra-stable Y-type zeolites to produce biohydrogen. The effects of various factors, such as SiO2/Al2O3 ratio, nickel loading, and reaction temperature, on the catalytic gasification process were examined. The results showed that a nickel loading of 5wt% on the zeolite catalyst led to higher gas yield and hydrogen concentration, as well as lower concentrations of harmful compounds. By optimizing the reaction conditions, it is possible to transform furniture waste into hydrogen-rich syngas with reduced pollution levels.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Chemical

Surface modification of TiO2 by adding V2O5 nanocatalytic system for hydrogen generation

Lalitha Gnanasekaran et al.

Summary: The surface modification of titanium-dioxide semiconductor with V2O5 enhanced its visible light activity for hydrogen generation. This research aimed to achieve visible light activity for hydrogen production through water splitting using the synthesized photocatalyst. The TiO2-V2O5 composite exhibited lower band gap, promoting its photocatalytic activity for hydrogen production.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)

Article Food Science & Technology

Determination of D&C Red 33 and Patent Blue V Azo dyes using an impressive electrochemical sensor based on carbon paste electrode modified with ZIF-8/g-C3N4/Co and ionic liquid in mouthwash and toothpaste as real samples

Hassan Karimi-Maleh et al.

Summary: Synthetic azo dyes are widely used in various industries, posing a risk to human health. This study developed a new carbon paste electrode modified with ZIF-8/g-C3N4/Co nanocomposite and 1-methyl-3-butylimidazole bromide as an ionic liquid for the sensitive detection of common dyes in cosmetics.

FOOD AND CHEMICAL TOXICOLOGY (2022)

Article Chemistry, Physical

Gentle Haulers of Lithium-Ion-Nanomolybdenum Carbide Fillers in Solid Polymer Electrolyte

Yuhang Shan et al.

Summary: Nanomolybdenum carbides were used as inorganic fillers in solid polymer electrolytes to reduce the energy barrier of lithium-ion transfer. The nanofillers improved the ionic conductivity of the electrolyte by building carrier channels and promoting uniform charge distribution and lithium-ion deposition.

ACS ENERGY LETTERS (2022)

Article Agricultural Engineering

Tourmaline enhanced methane yield via regulating microbial metabolic balance during anaerobic co-digestion of corn stover and cow manure

Qing Wang et al.

Summary: This study conducted a pilot-scale experiment to investigate the effects of substrate ratio, tourmaline concentration, and high-temperature thermally modified material on the anaerobic co-digestion of corn stover and cow manure. The results showed that a corn stover-to-cow manure feeding ratio of 2:1 resulted in higher methane yield. Microbial diversity analysis revealed that adding low doses of tourmaline regulated the distribution of microorganisms, with Methanobacteria becoming the dominant methanogenic archaea in the fermentation broth.

BIORESOURCE TECHNOLOGY (2022)

Article Chemistry, Physical

The direct Z-scheme CdxZn1-xS nanorods-Fe2O3 quantum dots heterojunction/reduced graphene oxide nanocomposites for photocatalytic degradation and photocatalytic hydrogen evolution

Qianyu Liu et al.

Summary: A simple hydrothermal strategy was used to prepare CdxZn1-xS-FG nanocomposites as multifunctional photocatalysts for photocatalytic degradation of organic dyes and hydrogen evolution. By adjusting the Cd2+ and Zn2+ ions ratio, the bandgap of the nanocomposites can be tuned, with Cd0.3Zn0.7S-FG showing the highest H-2 evolution rate and degradation efficiency under visible light irradiation.

APPLIED SURFACE SCIENCE (2021)

Article Agricultural Engineering

Augmented biohydrogen production from rice mill wastewater through nano-metal oxides assisted dark fermentation

K. Rambabu et al.

Summary: This study demonstrates that the addition of NiO and CoO nanoparticles to dark fermentation of rice mill wastewater significantly enhances biohydrogen production. The optimal dosage of 1.5 mg/L for both NiO and CoO resulted in a 2.09-fold and 1.9-fold increase in biohydrogen yield, respectively.

BIORESOURCE TECHNOLOGY (2021)

Review Energy & Fuels

Microalgae and ammonia: A review on inter-relationship

Wai Siong Chai et al.

Summary: This paper examines the inter-relationship between microalgae and ammonia as carbon reduction options, as well as their future prospects. It also discusses the related technologies, challenges, and the role of governmental policies in driving development in this field. Further research on environmental impact and energy consumption is needed to improve upon current fossil fuel usage.
Article Green & Sustainable Science & Technology

Experimental investigation of pneumatic motor for transport application

Yonghong Xu et al.

Summary: The study proposes an auxiliary power system based on a pneumatic motor for compressed-air-powered vehicles, investigating the effects of key operating parameters on the performance of the pneumatic motor and studying the output power and energy efficiency characteristics. Experimental results show that the energy efficiency of the pneumatic motor reaches a maximum of approximately 62%, and the power output can reach a maximum of approximately 410 W.

RENEWABLE ENERGY (2021)

Review Chemistry, Analytical

Design principle in biosensing: Critical analysis based on graphitic carbon nitride (G-C3N4) photoelectrochemical biosensor

Sze Shin Low et al.

Summary: This review provides a comprehensive overview of the field of photoelectrochemical biosensing, with a focus on the design principles and synthesis methods of g-C3N4-based PEC biosensors. The review highlights the three design principles of g-C3N4-based PEC biosensors, providing researchers with comprehensive design guidelines.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2021)

Article Energy & Fuels

Experimental studies on the changing characteristics of the gas flow capacity on bituminous coal in CO2-ECBM and N2-ECBM

Lei Zhang et al.

Summary: This study examined the changing characteristics of gas flow capacity in ECBM, finding that the differences between CO2 and N2 tests affect the outflow rate, volumetric strain, and duration of each stage in permeability. The observation of different characteristics in the two tests provides new insight into the behavior of gas flow in coal reservoirs.
Article Engineering, Environmental

Significant Improvement of Catalytic Performance for Chlorinated Volatile Organic Compound Oxidation over RuOx Supported on Acid-Etched Co3O4

Hao Liu et al.

Summary: The strategy of constructing surface defects on Co3O4 support by acid etching was utilized to enhance the interaction between active RuOx species and the support, resulting in improved dispersity and thermal stability. The optimized Ru catalyst achieved complete oxidation of vinyl chloride at lower temperatures with hardly any loss of Ru species, and phosphate modification effectively reduced polychlorinated byproducts. This method provides a promising approach for catalyst design in CVOC oxidation.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Significantly enhanced photocatalytic hydrogen production performance of g-C3N4/CNTs/CdZnS with carbon nanotubes as the electron mediators

Chang Feng et al.

Summary: This study prepared a g-C3N4/CNTs/CdZnS Z-scheme photocatalyst using carbon nanotubes as electron mediators, which showed significantly enhanced photocatalytic hydrogen production performance and excellent stability.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

BiVO3/g-C3N4 S-scheme heterojunction nanocomposite photocatalyst for hydrogen production and amaranth dye removal

Mohamed Benaissa et al.

Summary: In this study, a novel BiVO3/g-C3N4 heterojunction nanoparticles were utilized for photodegradation of amaranth dye and efficient hydrogen gas evolution. The synthesis of g-C3N4 nanosheets through thermal decomposition of urea and deposition of BiVO3 nanoparticles on g-C3N4 surface were achieved under ultrasonic irradiation. The nanocomposite with 10 wt% BiVO3 exhibited superior stability and remarkable photocatalytic efficiency for dye degradation and hydrogen evolution.

OPTICAL MATERIALS (2021)

Review Green & Sustainable Science & Technology

A review on ammonia, ammonia-hydrogen and ammonia-methane fuels

Wai Siong Chai et al.

Summary: The combustion of fuels for energy generation is crucial for human activities, but it results in emissions that cause environmental complications and health risks. The replacement of conventional fuels for zero carbon emission is important, with ammonia offering advantages over hydrogen as a carbon-free fuel, but facing challenges such as low burning velocity and high emissions. Therefore, the study of secondary fuels like hydrogen and methane to assist ammonia combustion is essential.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Engineering, Chemical

Optimization of Hydrolysis-Acidogenesis Phase of Swine Manure for Biogas Production Using Two-Stage Anaerobic Fermentation

Chiu-Yue Lin et al.

Summary: Through response surface methodology, the optimization of operational period and initial operational pH for hydrolysis and acidogenesis of swine manure at 35 degrees C in batch operation mode was conducted. The optimal condition resulted in peak volatile acid production, methane production rate, and methane yield. The two-stage anaerobic system showed higher biogas production efficiency compared to a single-stage system, with similar dominant methane-producing species.

PROCESSES (2021)

Article Chemistry, Physical

Enhanced biohydrogen production from date seeds by Clostridium thermocellum ATCC 27405

K. Rambabu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Biological hydrogen production via dark fermentation: A holistic approach from lab-scale to pilot-scale

G. Balachandar et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Biotechnology & Applied Microbiology

Fabrication of a ternary carbon dots/CoO/g-C3N4 nanocomposite photocatalyst with enhanced visible-light-driven photocatalytic hydrogen production

Weilong Shi et al.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2020)

Article Chemistry, Physical

InP/ZnS Quantum Dots as Efficient Visible-Light Photocatalysts for Redox and Carbon-Carbon Coupling Reactions

Indra Narayan Chakraborty et al.

CHEMISTRY OF MATERIALS (2019)

Article Engineering, Environmental

Mechanothermal synthesis of Ag/TiO2 for photocatalytic methyl orange degradation and hydrogen production

R. Saravanan et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Article Chemistry, Physical

A surface modification resultant thermally oxidized porous g-C3N4 with enhanced photocatalytic hydrogen production

Liuqing Yang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Review Engineering, Electrical & Electronic

A review on photocatalytic application of g-C3N4/semiconductor (CNS) nanocomposites towards the erasure of dyeing wastewater

Sze-Mun Lam et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2016)

Article Chemistry, Physical

CdS-loaded flexible carbon nanofiber mats as a platform for solar hydrogen production

Young Kwang Kim et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Review Chemistry, Multidisciplinary

Methods for enhancing bio-hydrogen production from biological process: A review

Lakhveer Singh et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Article Chemistry, Multidisciplinary

Reduced Graphene Oxide/InGaZn Mixed Oxide Nanocomposite Photocatalysts for Hydrogen Production

Satyabadi Martha et al.

CHEMSUSCHEM (2014)

Article Chemistry, Physical

Graphene supported bimetallic G-Co-Pt nanohybrid catalyst for enhanced and cost effective hydrogen generation

Shubhanwita Saha et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Physical

TiO2-graphene nanocomposites for photocatalytic hydrogen production from splitting water

Ping Cheng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Review Biotechnology & Applied Microbiology

A comprehensive and quantitative review of dark fermentative biohydrogen production

Simon Rittmann et al.

MICROBIAL CELL FACTORIES (2012)

Article Chemistry, Physical

Highly efficient CuO incorporated TiO2 nanotube photocatalyst for hydrogen production from water

Shiping Xu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Review Chemistry, Multidisciplinary

Current Progress on the Chemical Modification of Carbon Nanotubes

Nikolaos Karousis et al.

CHEMICAL REVIEWS (2010)