☆ 4.7 Article

Fabrication and properties of thermally conductive adhesive tapes containing multilayer graphene patterns

CERAMICS INTERNATIONAL (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Carboxyethyl acrylate incorporated optically clear adhesives with outstanding adhesion strength and immediate strain recoverability for stretchable electronics

Daegyun Lim et al.

Summary: In this study, UV curable acrylate-based pressure-sensitive adhesives (PSAs) with exceptionally strong peel adhesion and good flexibility were synthesized. The synthesized films also had adequate transmittance to be used as an optically clear adhesive. By implementing a pre-straining strategy, the PSAs exhibited purely elastic characteristic with instantaneous strain recovery and were able to withstand 5000 cycles of repetitive stretching and bending tests.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of h-BN Filled Epoxy-Based Thermally Conductive Adhesive Tapes Containing Cyclic Carbonate-Terminated Oligomers

Gayoung Lim et al.

Summary: The study focused on fabricating high thermal conductivity TC adhesive tapes using epoxy-based adhesives and h-BN fillers. By synthesizing cyclic carbonate-terminated oligomers to ensure high peel strength and partially aligning fillers in-plane, the thermal conductivity of the tapes was significantly improved.

ELECTRONIC MATERIALS LETTERS (2022)

Add to Collection

Article Materials Science, Ceramics

Thermally conductive hexagonal boron nitride/spherical aluminum oxide hybrid composites fabricated with epoxyorganosiloxane

Gayoung Lim et al.

Summary: The study focused on enhancing the thermal conductivity of h-BN composites by using an epoxyorganosiloxane with low viscosity and incorporating spherical aluminum oxides. This led to an improvement in through-plane thermal conductivity and a reduction in viscosity despite higher filler loading in the h-BN/AO hybrid composites.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Thermal conductivity and mechanical durability of graphene composite films containing polymer-filled connected multilayer graphene patterns

Jian Cheng Bi et al.

Summary: Graphene has high thermal conductivity but is prone to tearing, limiting its use as a thermal interface material in flexible electronics. This study fabricated graphene composite films by infiltrating thermoplastic polymers into graphene patterns, achieving high thermal conductivity and preventing tearing.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Thermal conductivity and mechanical properties of thermally conductive composites based on multifunctional epoxyorganosiloxanes and hexagonal boron nitride

Hyesun Yun et al.

Summary: This study synthesized multifunctional epoxyorganosiloxanes (MEOSs) to fabricate thermally conductive composites, demonstrating that lower molecular weight MEOSs can improve reaction rates and enhance the mechanical properties of cured composites. Furthermore, by mixing EC-1 with h-BN to fabricate composites, high filler loading was achieved, leading to high thermal conductivity and good mechanical properties in the cured composite.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Review Polymer Science

Developments in pressure-sensitive adhesives: a review

Sachin Mapari et al.

Summary: Adhesives are categorized based on their chemical nature and origin, with pressure-sensitive adhesives (PSAs) being a significant class that do not undergo any chemical reaction or physical change during the adhesion process. The use of hybrid polymers in the PSA market, characterized by silane-curing organic compounds with wide formulation tolerance and outstanding mechanical properties, is a major trend. The article discusses various types of PSAs, recent trends based on application properties, and their synthesis techniques.

POLYMER BULLETIN (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Thermally Conductive Film Fabricated Using Perforated Graphite Sheet and UV-Curable Pressure-Sensitive Adhesive

Hee-Jin Lee et al.

Summary: Thermally conductive film was produced using perforated graphite sheet and UV-curable pressure-sensitive adhesive, achieving a high thermal conductivity of 179 W·m(-1)K(-1) and stable performance after folding tests. The novel UV-curable PSA technology used in this work effectively eliminated defects and ensured the flexibility and durability of the film.

NANOMATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Stretchable and recoverable acrylate-based pressure sensitive adhesives with high adhesion performance, optical clarity, and metal corrosion resistance

Ju Hak Lee et al.

Summary: This study investigates the compositional effect of acrylic acid (AA) on the physical properties of synthesized pressure sensitive adhesives (PSAs), proposing an empirical criterion for intimate wetting. The PSA with the best adhesion performance demonstrates excellent viscoelastic properties and suitability for specific applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of Flexible Electrode with Sub-Tenth Micron Thickness Using Heat-Induced Peelable Pressure-Sensitive Adhesive Containing Amide Groups

Hyebeom Shin et al.

Summary: A heat-induced peelable pressure-sensitive adhesive (h-PSA) was developed to create a flexible electrode with sub-tenth micron thickness, enabling clean separation of metal patterns on a PET film from the substrate at 80 degrees C. The flexible electrode showed good mechanical durability in a U-shape folding test.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Fabrication of flexible electrodes using peelable pressure-sensitive adhesives containing methacrylic-modified cyclic siloxanes

Goseong Bok et al.

Summary: A peelable pressure-sensitive adhesive (PSA) was fabricated and used for manufacturing flexible electrodes, providing a solution to challenges in the fabrication process. The flexible electrode fabricated using PSA-5 maintained stable electrical properties after 10,000 folding test cycles.

REACTIVE & FUNCTIONAL POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal Properties of the Binary-Filler Hybrid Composites with Graphene and Copper Nanoparticles

Zahra Barani et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Thermodynamics

Characterization and experimental investigation of aluminum nitride-based composite phase change materials for battery thermal management

Jiangyun Zhang et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Acrylic Pressure-Sensitive Adhesive Reinforced with Aluminum Nitride and Its Thermal Properties: Effect of Surface Treatment and Particle Size

Garima Mittal et al.

COATINGS (2020)

Add to Collection

Article Engineering, Chemical

Thermally conductive adhesives from covalent-bonding of reduced graphene oxide to acrylic copolymer

Minh Canh Vu et al.

JOURNAL OF ADHESION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Associative behavior of polyimide/cyclohexanone solutions

Hongxiang Chen et al.

RSC ADVANCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of acrylic copolymer with aluminum nitride fillers and its physical and thermal properties

Deoukchen Ghim et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Strongly Anisotropic Thermal Conductivity of Free-Standing Reduced Graphene Oxide Films Annealed at High Temperature

Jackie D. Renteria et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Editorial Material Polymer Science

Pressure sensitive adhesives based on interpolymer complexes

Mikhail M. Feldstein et al.

PROGRESS IN POLYMER SCIENCE (2015)

Add to Collection

Article Polymer Science

Viscoelastic and Adhesive Properties of Single-Component Thermo-Resistant Acrylic Pressure Sensitive Adhesives

Xingchen Lu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal Conductivity of Graphene Laminate

H. Malekpour et al.

NANO LETTERS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene-Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials

Khan M. F. Shahil et al.

NANO LETTERS (2012)

Add to Collection

Article Chemistry, Physical

On the Nature of Inter layer Interactions in a System of Two Graphene Fragments

Julia Berashevich et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Add to Collection

Review Chemistry, Physical

Thermal properties of graphene and nanostructured carbon materials

Alexander A. Balandin

NATURE MATERIALS (2011)

Add to Collection

Article Engineering, Chemical

The influence of butyl acrylate/methyl methacrylate/2-hydroxy ethyl methacrylate/acrylic acid latex properties on pressure sensitive adhesive performance

Lili Qie et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.