4.7 Article

Morphology-controlled BaTiO3 nanostructures with high sensitivity and fast response for respiratory monitoring

Related references

Note: Only part of the references are listed.
Article Materials Science, Ceramics

Aerosol deposited BaTiO3 film based interdigital capacitor and squared spiral capacitor for humidity sensing application

Alok Kumar et al.

Summary: This study investigates ultra-high sensitive BaTiO3 film based capacitors for humidity sensing application, exploring the impact of electric field distribution and open area ratio on the sensors' sensitivity. The results show that capacitors with larger open area ratios exhibit higher sensitivity, and the SSC structure demonstrates greater sensitivity compared to other structures.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Enhanced positive humidity sensitive behavior of p-reduced graphene oxide decorated with n-WS2 nanoparticles

Zai-Hua Duan et al.

Summary: This paper presents a humidity sensor based on p-type reduced graphene oxide and n-type WS2 nanoparticles modification, which has positive humidity sensitivity and good linear response; the sensitivity of the rGO/WS2 humidity sensor is higher, mainly attributed to the p-n heterojunction; the sensor has small humidity hysteresis and good repeatability.

RARE METALS (2021)

Article Nanoscience & Nanotechnology

Unique Noncontact Monitoring of Human Respiration and Sweat Evaporation Using a CsPb2Br5-Based Sensor

Myung-Yeon Cho et al.

Summary: Respiration monitoring and human sweat sensing have great potential for application in personal healthcare data collection, disease diagnostics, and preventing human-to-human transmission of deadly viruses. A unique sensing system based on a CsPb2Br5/BaTiO3 humidity-sensing layer was introduced, showing optimal performance with a 1.0 μm thick layer due to its ideal microstructure. The sensor offers high electrical signal variation at 0.5 kHz, making it the best device for monitoring sudden changes in respiratory rates and detecting sweat evaporation with ultrasensitive capabilities.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Ceramics

Synthesis of high response gold/titanium dioxide humidity sensor and its application in human respiration

Shuguo Yu et al.

Summary: The Au nanoparticles modified TiO2 humidity sensor shows excellent performance in real-time monitoring of human respiration, with high response, good linearity, and high reliability. It is also effective in detecting different breathing states and skin surface moisture, showing strong application potential in non-contact sensing.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Analytical

Design of high sensitivity graphite carbon nitride/zinc oxide humidity sensor for breath detection

Shuguo Yu et al.

Summary: A high-performance graphite carbon nitride/zinc oxide (g-C3N4/ZnO) humidity sensor was designed for respiratory monitoring, with experiments showing improved performance through increased oxygen vacancy defects and hydroxyl groups on the surface.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Physical

Ultra-highly sensitive humidity sensing by polydopamine/graphene oxide nanostructure on quartz crystal microbalance

Dongzhi Zhang et al.

Summary: This study presents a solution for high-performance humidity sensors by coating PDA-GO nanocomposite films on quartz crystal microbalances. The sensors exhibit best dynamic response with specific ratio and spray amount, fast response/recovery time, stable repeatability, and excellent stability, showing potential in various applications.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Inorganic & Nuclear

A 2D honeycomb coordination polymer of [Cd(TMA)]n (H2TMA=3-thiophenemalonic acid) for humidity sensing applications

Yan-Yan Yin et al.

Summary: In this study, a new CP material CdTMA was successfully synthesized and explored as an impedimetric humidity sensing material, showing high sensitivity, good repeatability, fast response, and narrow hysteresis loop. The humidity sensing mechanism was discussed through complex impedance analysis, and the interaction between water molecules and CdTMA at different RH was further visualized by schematic diagrams.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Article Chemistry, Analytical

Defect-rich ultrathin Sn2O3 nanosheets with dominant polar (100) facets for efficient gas and humidity sensor applications

Yue Xing et al.

Summary: Defect-rich ultrathin heterovalent tin oxide nanosheets with dominant polar (100) facets were successfully synthesized, and high-performance gas and humidity sensors were fabricated based on their morphology, defects, and exposed facets. These sensors exhibit excellent response speed, repeatability, and stability, providing an important practical candidate for new applications in electronic sensory devices.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

An excellent impedance-type humidity sensor based on halide perovskite CsPbBr3 nanoparticles for human respiration monitoring

Zhilin Wu et al.

Summary: The study demonstrates an excellent impedance humidity sensor based on CsPbBr3 nanoparticles, showing fast response, good stability, and low power consumption. The humidity sensing mechanism was further studied by electrochemical impedance spectroscopy, indicating great potential in future health monitoring applications.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Physical

Surface Ligand Engineering for a Lead-Free Cs3Cu2Br5 Microcrystal-Based Humidity Sensor with a Giant Response

Yanyi Huang et al.

Summary: This study utilized surface ligands (OLA and OAm) to modify lead-free Cs3Cu2Br5 perovskite microcrystals, preparing an environmentally friendly humidity sensor. Experimental results showed that sensors with different ligands exhibited varying impedance changes at different relative humidities. Short-chain OLA promoted the formation of porous films with strong water absorption capacity, enhancing sensor sensitivity, while long-chain OAm facilitated the formation of dense films, improving response ability at low humidity.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Article Instruments & Instrumentation

Paper and carbon ink enabled low-cost, eco-friendly, flexible, multifunctional pressure and humidity sensors

Zaihua Duan et al.

Summary: The study proposed low-cost, eco-friendly, flexible, multifunctional pressure and humidity sensors by utilizing the characteristics of paper and carbon ink. These sensors demonstrated good sensitivity and response, allowing for various monitoring functions from contact to non-contact, significantly improving the comfort of wearable devices.

SMART MATERIALS AND STRUCTURES (2021)

Review Materials Science, Multidisciplinary

Recent advances in humidity sensors for human body related humidity detection

Zaihua Duan et al.

Summary: Humidity sensors have attracted great attention in human body-related humidity detection, and significant efforts have been devoted to the development of human body-related humidity sensors in recent years. Despite remarkable achievements, many challenges still exist in this field.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Physical

Controllable construction of Ho2O3 nanomaterials with different dimensions (1D, 2D, and 3D) for real-time monitoring human breathing and body surface humidity detection

Chuanyu Guo et al.

Summary: In this study, Ho2O3 nanomaterials with various morphologies were successfully synthesized using a solvothermal self-assembly strategy, and applied for humidity detection for the first time. Among them, the ultra-thin porous Ho2O3 NS humidity sensor showed the best responsiveness, with impedance changing nearly four orders of magnitude when humidity levels varied from 11-95% RH.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

Ultrathin CeO2 nanosheets as bifunctional sensing materials for humidity and formaldehyde detection

Peng Zhang et al.

Summary: In this study, ultrathin CeO2 nanosheets were synthesized through a facile low-temperature hydrothermal method, showing potential as bifunctional sensing materials for humidity and formaldehyde vapor. The CeO2 nanosheets exhibited excellent sensing characteristics and fast response/recovery speed towards humidity and formaldehyde vapor, respectively. The sensing mechanisms for humidity and formaldehyde were also discussed.

RARE METALS (2021)

Article Materials Science, Ceramics

Effect of BaTiO3 on the sensing properties of PVDF composite-based capacitive humidity sensors

Shoaib Mallick et al.

CERAMICS INTERNATIONAL (2020)

Article Chemistry, Analytical

Novel application of attapulgite on high performance and low-cost humidity sensors

Zaihua Duan et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Nanoscience & Nanotechnology

Facile and low-cost fabrication of a humidity sensor using naturally available sepiolite nanofibers

Zaihua Duan et al.

NANOTECHNOLOGY (2020)

Review Nanoscience & Nanotechnology

Paper-Based Sensors for Gas, Humidity, and Strain Detections: A Review

Huiling Tai et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Analytical

High-sensitivity resistive humidity sensor based on graphitic carbon nitride nanosheets and its application

Weiqi Meng et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Chemistry, Analytical

Evolution of breath analysis based on humidity and gas sensors: Potential and challenges

Huiling Tai et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Chemistry, Analytical

High-sensitivity and low-hysteresis humidity sensor based on hydrothermally reduced graphene oxide/nanodiamond

Xinglin Yu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Multidisciplinary

Lead-Free Cs2BiAgBr6 Double Perovskite-Based Humidity Sensor with Superfast Recovery Time

Zhenhua Weng et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Nanoscience & Nanotechnology

Charge Coupling Enhanced Photocatalytic Activity of BaTiO3/MoO3 Heterostructures

Kevin V. Alex et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Inorganic & Nuclear

A ciprofloxacin based 1D Cd(II) coordination polymer with highly efficient humidity sensing performance

Ting Li et al.

INORGANIC CHEMISTRY COMMUNICATIONS (2019)

Article Nanoscience & Nanotechnology

Ultrafast Response Polyelectrolyte Humidity Sensor for Respiration Monitoring

Jianxun Dai et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Water Sorption in MXene/Polyelectrolyte Multilayers for Ultrafast Humidity Sensing

Hyosung An et al.

ACS APPLIED NANO MATERIALS (2019)

Article Materials Science, Multidisciplinary

TaS2 nanosheet-based ultrafast response and flexible humidity sensor for multifunctional applications

Yu Feng et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Materials Science, Ceramics

Molten-salt synthesis of Ba5-xSrxNb4O15 solid solutions and their enhanced humidity sensing properties

Guo-Jin Ji et al.

CERAMICS INTERNATIONAL (2018)

Article Chemistry, Analytical

Drawn a facile sensor: A fast response humidity sensor based on pencil-trace

Yong Zhang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Analytical

Super-fast response humidity sensor based on La0.7Sr0.3MnO3 nanocrystals prepared by PVP-assisted sol-gel method

Zaihua Duan et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Analytical

Thickness effects of aerosol deposited hygroscopic films on ultra-sensitive humidity sensors

Jun-Ge Liang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Nanoscience & Nanotechnology

Preparation of Ultrasensitive Humidity-Sensing Films by Aerosol Deposition

Jun-Ge Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Analytical

Synthesis and characterization of perovskite barium titanate thin film and its application as LPG sensor

Monika Singh et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Article Chemistry, Analytical

Photonic crystal fiber interferometer coated with a PAH/PAA nanolayer as humidity sensor

Diego Lopez-Torres et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Article Chemistry, Analytical

Recent trends of ceramic humidity sensors development: A review

T. A. Blank et al.

SENSORS AND ACTUATORS B-CHEMICAL (2016)

Article Chemistry, Physical

Supramolecularly Modified Graphene for Ultrafast Responsive and Highly Stable Humidity Sensor

Shiwei Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Article Chemistry, Analytical

High performance humidity sensors based on CeO2 nanoparticles

Wuyuan Xie et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Review Chemistry, Analytical

Advances in wearable chemical sensor design for monitoring biological fluids

Giusy Matzeu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Materials Science, Ceramics

Grain growth kinetics of barium titanate synthesized using conventional solid state reaction route

K. R. Kambale et al.

CERAMICS INTERNATIONAL (2014)

Article Materials Science, Ceramics

Template-free fabrication of pure single-crystalline BaTiO3 nano-wires by molten salt synthesis technique

Bao-rang Li et al.

CERAMICS INTERNATIONAL (2014)

Article Chemistry, Analytical

Humidity-sensing studies of cerium oxide nanoparticles synthesizedby non-isothermal precipitation

V. R. Khadse et al.

SENSORS AND ACTUATORS B-CHEMICAL (2014)

Article Chemistry, Analytical

Rapid synthesis of cerium oxide nanoparticles with superior humidity-sensing performance

Sharada Thakur et al.

SENSORS AND ACTUATORS B-CHEMICAL (2014)

Article Chemistry, Analytical

Humidity sensing properties of BaTiO3 nanofiber prepared via electrospinning

Yuan He et al.

SENSORS AND ACTUATORS B-CHEMICAL (2010)

Article Chemistry, Physical

Influence of the doping of Ti4+ ions on electrical and magnetic properties of Mn1+xFe2-2xTixO4 ferrite

A. M. M. Farea et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Article Chemistry, Physical

General surfactant-free synthesis of MTiO3 (M = Ba, Sr, Pb) perovskite nanostrips

Hong Deng et al.

JOURNAL OF MATERIALS CHEMISTRY (2009)

Article Materials Science, Ceramics

Characterization of optical properties of amorphous BaTiO3 nanothin films

R. Ashiri et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2009)

Article Chemistry, Analytical

Capacitive humidity sensor design based on anodic aluminum oxide

Youngdeuk Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2009)

Article Chemistry, Analytical

Humidity sensors based on TiO2 nanoparticles/polypyrrole composite thin films

Pi-Guey Su et al.

SENSORS AND ACTUATORS B-CHEMICAL (2007)

Article Chemistry, Analytical

Electrical characterization of Fe2O3 humidity sensors doped with Li+, Zn2+ and Au3+ ions

G Neri et al.

SENSORS AND ACTUATORS B-CHEMICAL (2005)