☆ 4.8 Article

Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models

BIOMATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Biochemical Research Methods

Customized Multilayered Tissue-on-a-Chip (MToC) to Simulate Bacillus Calmette-Guerin (BCG) Immunotherapy for Bladder Cancer Treatment

Seungjin Lee et al.

Summary: The organ-on-a-chip technology, an advanced cell culture platform, has garnered attention recently for its ability to maintain the physiological characteristics of cells. This technology enables efficient development of drugs, medical devices, and biomaterials, as well as realization of patient-specific precise medicine through organ-specific 3D structures and various mechanical/chemical stimuli built into the chip.

BIOCHIP JOURNAL (2022)

Add to Collection

Review Pharmacology & Pharmacy

Organotypic and Microphysiological Human Tissue Models for Drug Discovery and Development-Current State-of-the-Art and Future Perspectives

Sonia Youhanna et al.

Summary: Despite major breakthroughs in chemistry, molecular biology, and genetics, the number of successful drug development projects has remained stagnant for decades. To improve predictions of clinical efficacy and safety, interest has shifted to three-dimensional culture methods. This review discusses the latest advances in available organotypic culture techniques and emerging models of human tissues, as well as developments in bioprinting and microfluidic multiorgan cultures. The importance of fabrication of organotypic culture platforms and choice of platform material is highlighted, along with the need for further validation, benchmarking, and consolidation efforts.

PHARMACOLOGICAL REVIEWS (2022)

Add to Collection

Review Materials Science, Biomaterials

Hydrogel-Based Fiber Biofabrication Techniques for Skeletal Muscle Tissue Engineering

Marina Volpi et al.

Summary: The functional capabilities of skeletal muscle are closely related to its well-arranged microstructure. Skeletal muscle tissue engineering aims to fabricate in vitro bioartificial muscle tissue constructs to accelerate the regeneration process. Hydrogel fiber-based techniques have gained interest in SMTE for their ability to guide myoblast alignment.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2022)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Three-dimensional printing of clinical scale and personalized calcium phosphate scaffolds for alveolar bone reconstruction

Margaret Anderson et al.

Summary: This study aimed to devise a protocol for fabricating customized clinical scale and patient-specific bioceramic scaffolds for reconstructing large alveolar bone defects. The study successfully developed a clinically feasible laboratory workflow using CBCT imaging to design and 3D print defect-specific bioceramic scaffolds. OsteoinkTM was identified as a biocompatible material for precision-fit alveolar bone reconstructive procedures.

DENTAL MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Innovations in craniofacial bone and periodontal tissue engineering - from electrospinning to converged biofabrication

Zeynep Aytac et al.

Summary: This paper provides a detailed analysis of scaffold strategies for craniomaxillofacial bone and periodontal regeneration, focusing on the latest 3D printing technologies. The future direction discussed includes the utilization of complementary biomaterials and fabrication technologies for effective translation of personalized and functional scaffolds into clinical applications.

INTERNATIONAL MATERIALS REVIEWS (2022)

Add to Collection

Article Materials Science, Biomaterials

Additive manufacturing of hydroxyapatite-chitosan-genipin composite scaffolds for bone tissue engineering applications

K. Zafeiris et al.

Summary: Additive manufacturing was used to create 3D scaffolds for bone tissue engineering by synthesizing hybrid hydroxyapatite hydrogels through a bioinspired approach, with modifications in rheology and printing parameters to optimize the final product. Evaluation of porosity and biocompatibility demonstrated that the scaffolds had suitable properties for cell adhesion and viability.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Engineering, Biomedical

Engineering in vitro human neural tissue analogs by 3D bioprinting and electrostimulation

Danielle Warren et al.

Summary: Building clinically relevant, reproducible, and standardized in vitro human neural tissue models using 3D bioprinting has the potential to significantly impact research and clinical translation in studying and treating neurological disorders. By carefully considering the printing technique, supporting biomaterials, and specific external stimuli, advanced and precise tissue analogs that closely mimic natural tissues can be engineered, with the added advantage of using electrical stimulation to enhance printed tissue development and modeling traditional and new stimulation platforms.

APL BIOENGINEERING (2021)

Add to Collection

Review Engineering, Biomedical

3D bioprinting of stem cell-laden cardiac patch: A promising alternative for myocardial repair

Sanskrita Das et al.

Summary: Stem cell-laden three-dimensional bioprinted cardiac patches show promise in treating ischemic cardiomyopathy by reversing scar formation and promoting myocardial regeneration, but face challenges in achieving consistent results.

APL BIOENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Recapitulating macro-scale tissue self-organization through organoid bioprinting

Jonathan A. Brassard et al.

Summary: The 3D bioprinting approach combines organoid-forming stem cells and extracellular matrix to achieve tissue self-organization, allowing for the generation of tissues with complex structures and diverse cell types at centimeter scales. This method opens up new avenues for drug discovery, diagnostics, and regenerative medicine by controlling tissue self-organization from millimeter to centimeter scales.

NATURE MATERIALS (2021)

Add to Collection

Article Engineering, Biomedical

Toward a neurospheroid niche model: optimizing embedded 3D bioprinting for fabrication of neurospheroid brain-like co-culture constructs

Yi-Chen Ethan Li et al.

Summary: Researchers have used embedded 3D bioprinting to create structured brain-like co-culture constructs with neurospheroid patterns, mimicking a supportive bed resembling a neural stem cell growth environment. These brain-like co-cultures can provide a reproducible platform for modeling neurological diseases, neural regeneration, and drug development and repurposing.

BIOFABRICATION (2021)

Add to Collection

Article

4D bioprinting of tissues and organs

Shukufe Amukarimi et al.

Bioprinting (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Emerging Technologies in Multi-Material Bioprinting

Hossein Ravanbakhsh et al.

Summary: Bioprinting aims at creating functional biomimetic constructs, and multi-material bioprinting allows for better replication of cellular diversity and tissue complexity, opening up new opportunities for tissue engineering, tissue model engineering, therapeutics development, and personalized medicine.

ADVANCED MATERIALS (2021)

Add to Collection

Review Pharmacology & Pharmacy

3D Printing as a Promising Tool in Personalized Medicine

Vanessa Marcia Vaz et al.

Summary: Personalized medicine aims to tailor medication to individuals based on their physiology, drug response, and genetic profile. One major technology emerging to enable personalized medicine is 3D printing, which can create a variety of pharmaceutical dosage forms. The future application of this technology may include dispensing prescriptions based on individual needs in a clinical setting.

AAPS PHARMSCITECH (2021)

Add to Collection

Article Nanoscience & Nanotechnology

4D Printed Cardiac Construct with Aligned Myofibers and Adjustable Curvature for Myocardial Regeneration

Yue Wang et al.

Summary: 4D printing enables the creation of pre-designed structures with time-dependent, dynamic shape changes to promote uniform cellular growth and distribution. The development of near-infrared light-sensitive cardiac constructs allows on-demand shape changes to mimic the curved topology of myocardial tissue.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

4D Biofabrication Using a Combination of 3D Printing and Melt-Electrowriting of Shape-Morphing Polymers

Gissela Constante et al.

Summary: The study demonstrates the fabrication of scroll-like scaffolds with anisotropic topography using 4D printing techniques by combining 3D extrusion printing and melt-electrowriting. Shape-morphing technology allows efficient alignment of cells within the scaffold, with factors such as calcium ion concentration, environmental media, and scaffold geometry influencing the shape-morphing process. Additionally, the inclusion of PCL fibers in the scaffold generates a patterned surface that enables a high degree of cell orientation, which is not achievable on the alginate layer without fibers.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Biomedical

Dual 3D printing for vascularized bone tissue regeneration

Sung Yun Hann et al.

Summary: The development of vascular networks is crucial for tissue fabrication in regenerative medicine. 3D printing vascularized bone has gained attention due to bone disorders, but challenges persist due to the need for nanoscale precision. A novel 3D printing approach was combined with biocompatible materials to enhance vascular growth and tissue bioactivity.

ACTA BIOMATERIALIA (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synthetic Bone-Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions

Sara Romanazzo et al.

Summary: This study demonstrates the creation of bone mimicking constructs using 3D printing of a novel apatite-transforming ink in a supportive microgel matrix with living cells, inspired by the bone biomineralization process. The technique allows for the fabrication of complex bone-mimicked constructs at room temperature without the need for invasive chemicals, radiation, or postprocessing steps. The mineralized constructs can be deposited within a high density of stem cells, directing the cellular organization and promoting osteogenesis in vitro, offering a new strategy for bone tissue regeneration.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Biophysics

Fabrication of polylactic acid (PLA)-based porous scaffold through the combination of traditional bio-fabrication and 3D printing technology for bone regeneration

Xiaqing Zhou et al.

Summary: Artificial bone grafts offer advantages in promoting cell proliferation and differentiation in bone tissue regeneration, while using 3D printing technology combined with bio-fabrication methods to prepare porous spiral scaffolds can significantly improve cell growth and differentiation.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Osteogenic Properties of 3D-Printed Silica-Carbon-Calcite Composite Scaffolds: Novel Approach for Personalized Bone Tissue Regeneration

Parastoo Memarian et al.

Summary: The study evaluated the impact of carbon enriched bioceramic (C-Bio) scaffolds on canine adipose-derived mesenchymal stem cells (cAD-MSCs), finding that carbon can enhance cell adhesion, growth, and osteogenic differentiation. The results demonstrated excellent biocompatibility of C-Bio scaffolds and suggested their potential as a key structural material for bone tissue reconstruction.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

Add to Collection

Article Pharmacology & Pharmacy

3D-printed platform multi-loaded with bioactive, magnetic nanoparticles and an antibiotic for re-growing bone tissue

Ana S. Saraiva et al.

Summary: This study aimed to fabricate a 3D-printed polylactic acid platform loaded with hydroxyapatite (HA), iron oxide nanoparticles (IONPs) and an antibiotic (minocycline) with tuneable properties and multistimuli response, showing promising results in controlling bacterial biofilm and enhancing re-growing bone tissue. The presence of two types of nanoparticles modified the nanomorphological/nanotopographical feature of the 3D-platforms, leading to adequate bioactivity profile and increased osteogenesis-related gene expression. Disk diffusion assays and SEM analysis confirmed the antibiofilm effect of the 3D-platforms loaded with minocycline against Staphylococcus aureus, providing a disruptive approach for bone targeting applications.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Materials Science, Biomaterials

3D printing of silk microparticle reinforced polycaprolactone scaffolds for tissue engineering applications

Cian Vyas et al.

Summary: Polycaprolactone (PCL) scaffolds have been enhanced by incorporating Bombyx mori silk microparticles (SMP) as a reinforcing agent, showing improved mechanical properties and interconnectivity. The addition of SMP increased shear thinning and storage modulus, while enhancing cell behaviors such as proliferation and migration. The study demonstrates the potential suitability of SMP-reinforced PCL scaffolds for bone tissue engineering applications.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Materials Science, Biomaterials

Crosslinker-free silk/decellularized extracellular matrix porous bioink for 3D bioprinting-based cartilage tissue engineering

Xiao Zhang et al.

Summary: The study demonstrates the development of a crosslinker-free bioink for repairing articular cartilage defects using 3D bioprinting. The bioink, composed of silk fibroin and decellularized extracellular matrix, shows suitable mechanical strength and degradation rate with the ability to promote chondrogenic differentiation of bone marrow mesenchymal stem cells. The bioink could be an ideal scaffold for cartilage tissue engineering.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Materials Science, Biomaterials

Morphological and mechanical characterization of 3D printed PLA scaffolds with controlled porosity for trabecular bone tissue replacement

R. Baptista et al.

Summary: Bone tissue engineering provides scaffolding as a possibility for orthopedic trauma or disease, supporting the regeneration process to replace damaged bone tissue. The study 3D printed PLA scaffolds with different designs, evaluating the mechanical behavior and static response of the scaffolds.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Cellular extrusion bioprinting improves kidney organoid reproducibility and conformation

Kynan T. Lawlor et al.

Summary: The study demonstrates the use of extrusion-based three-dimensional cellular bioprinting to rapidly and efficiently generate kidney organoids with highly reproducible cell number and viability. This technology not only improves throughput and quality control in organoid production, but also facilitates precise control of structure, enhancing the in vitro and in vivo applications of stem cell-derived human kidney tissue.

NATURE MATERIALS (2021)

Add to Collection

Review Biotechnology & Applied Microbiology

In Situ 3D Printing: Opportunities with Silk Inks

Francesca Agostinacchio et al.

Summary: In situ 3D printing is an emerging technique designed for patient-specific needs and performed directly in the patient's tissues in the operating room. Silk fibroin inks are emerging as a viable option due to their diverse range of formulations, aqueous processability, robust and tunable mechanical properties, and self-assembly via biophysical adsorption.

TRENDS IN BIOTECHNOLOGY (2021)

Add to Collection

Review Polymer Science

3D Bioprinting of In Vitro Models Using Hydrogel-Based Bioinks

Yeong-Jin Choi et al.

Summary: This paper provides an in-depth assessment of the recently developed 3D bioprinting technology and bioinks, focusing on the latest achievements and future aspects of using 3D bioprinting for in vitro modeling.

POLYMERS (2021)

Add to Collection

Article Materials Science, Ceramics

High performance hydroxyapatite ceramics and a triply periodic minimum surface structure fabricated by digital light processing 3D printing

Yongxia Yao et al.

Summary: High performance hydroxyapatite (HA) ceramics were successfully fabricated using digital light processing (DLP) three-dimensional (3D) printing, with wet CO2 sintering atmosphere significantly improving densification and mechanical properties. The HA ceramics showed potential for bone engineering applications with improved cell vitality and proliferation, especially with the bio-inspired 3D-printed TPMS structure.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Editorial Material Nanoscience & Nanotechnology

Bioprinted mini kidneys

Christine Horejs

NATURE REVIEWS MATERIALS (2021)

Add to Collection

Article Engineering, Biomedical

Cryogenic 3D printing of dual-delivery scaffolds for improved bone regeneration with enhanced vascularization

Chong Wang et al.

Summary: 3D printing is increasingly used to create advanced bone tissue engineering scaffolds with biomimetic structures and matched mechanical strengths for improved bone regeneration. Customized scaffolds were produced using cryogenic 3D printing of beta-tricalcium phosphate and osteogenic peptide inks, and coated with angiogenic peptide hydrogel to enhance vascularization. The scaffolds had a hierarchically porous structure similar to human cancellous bone and showed high viability for both endothelial cells and mesenchymal stem cells. Improved in vitro migration and angiogenesis were observed for scaffolds with angiogenic peptide, while enhanced osteogenic differentiation was seen in scaffolds containing osteogenic peptide. In vivo, scaffolds with both peptides showed increased angiogenesis and new bone formation.

BIOACTIVE MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Low-temperature fabrication of calcium deficient hydroxyapatite bone scaffold by optimization of 3D printing conditions

Naren Raja et al.

Summary: A novel low-temperature fabrication process of calcium deficient hydroxyapatite (CDHA) scaffolds was proposed, combining material extrusion type 3D printing and bone cement chemistry, resulting in high-porosity scaffolds with excellent mechanical properties. The method allows for accurate control of size and 3D architecture, non-brittle scaffolds, and direct loading of heat-sensitive drugs and biomolecules. This low-temperature fabrication process shows great potential for bone tissue engineering applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Bioprinting of human nasoseptal chondrocytes-laden collagen hydrogel for cartilage tissue engineering

Xiaoyi Lan et al.

Summary: Skin cancer patients with tumorigenic lesions on their noses often require surgical resection resulting in nasal cartilage removal. Autologous tissue-engineered nasal cartilage grafts can help mitigate the problem, despite the issue of inhomogeneous distribution of cartilage matrix. Advances in 3D bioprinting technology offer customizable and anatomically shaped cartilages without the distribution issues.

FASEB JOURNAL (2021)

Add to Collection

Editorial Material Multidisciplinary Sciences

System in a dish

Charlie Schmidt

NATURE (2021)

Add to Collection

Review Pharmacology & Pharmacy

Clinical therapies and nano drug delivery systems for urinary bladder cancer

Pooja Jain et al.

Summary: Bladder cancer is the 10th most common malignancy worldwide with a 5-year survival rate of 75%, but 70% of the cases develop chemoresistance and progress to the muscle invasive stage. Nanotechnology has shown promise in targeted drug delivery to bladder cancer cells, offering potential for better treatment management.

PHARMACOLOGY & THERAPEUTICS (2021)

Add to Collection

Review Medicine, Research & Experimental

Translational stem cell therapy: vascularized skin grafts in skin repair and regeneration

Qian Hua Phua et al.

Summary: Significant progress has been made in skin tissue engineering, with the main obstacle to successful engraftment being the incorporation of functional vasculature to provide nutrients and oxygen supply to embedded cells. New technologies such as 3D bioprinting, nano-fabrication, and micro-patterning using hydrogel-based scaffolds are rapidly developing to address the limitations of traditional tissue engineering.

JOURNAL OF TRANSLATIONAL MEDICINE (2021)

Add to Collection

Article Materials Science, Biomaterials

3D printing novel in vitro cancer cell culture model systems for lung cancer stem cell study

Alejandro Herreros-Pomares et al.

Summary: Traditional two-dimensional (2D) in vitro cell cultures and animal models are limited in simulating the native environment for cancer stem cell (CSC) studies, but novel three-dimensional (3D) cell cultures show promise in enriching CSCs from lung cancer patients. Different 3D printing platforms were used to produce rigid and hydrogel-based scaffolds, with gene expression analysis confirming overexpression of stemness and invasion promoters in cells grown on hydrogel scaffolds and tumor spheres. The 3D printed models, especially those using GelMA-PEGDA hydrogels, outperform 2D culture models in mimicking tumor complexity and regulating cancer cell behavior.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Projection Microstereolithographic Microbial Bioprinting for Engineered Biofilms

Karen Dubbin et al.

Summary: In this study, a technique for patterning microbes in 3D geometries using projection stereolithography was developed and successfully used to demonstrate the impact of biofilm structure on microbial activity. The ability to print bacteria and fabricate a biofilm with different fluorescence E. coli strains was verified, showing potential for future work on engineered biofilms and complex 3D structures in microbial cultures.

NANO LETTERS (2021)

Add to Collection

Review Immunology

Immune response against the biomaterials used in 3D bioprinting of organs

Amir Elalouf

Summary: Regenerative medicine has made advancements in healing and replacing defective organs with the potential of 3D bioprinting specific organs tailored to patients. The complexity of 3D bioprinting involves the use of biomaterials that may trigger immune responses, requiring evaluation to reduce tissue rejection post-transplantation.

TRANSPLANT IMMUNOLOGY (2021)

Add to Collection

Article Engineering, Biomedical

In Vivo Printing of Nanoenabled Scaffolds for the Treatment of Skeletal Muscle Injuries

Jacob P. Quint et al.

Summary: This study presents a novel bioink utilizing nanotechnology and biomaterials for in vivo printing of adhesive and 3D scaffolds to promote muscle injury treatment. The results demonstrate that this technology can facilitate functional muscle recovery, reduce fibrosis, and increase anabolic response.

ADVANCED HEALTHCARE MATERIALS (2021)

Add to Collection

Article Materials Science, Biomaterials

3D Printed Hydrogels with Aligned Microchannels to Guide Neural Stem Cell Migration

Cui Li et al.

Summary: This study utilized 3D printing technology to create hydrogel scaffolds with designed shape, microchannels, and mechanical properties, achieving high shape precision and spatial control of bioactive molecule distribution to the lesion site. These scaffolds exhibit high neuro-compatibility and can serve as protective and guidance vehicles for transplanted NSC organization and integration.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Bioengineered Skin Substitutes: Advances and Future Trends

Shima Tavakoli et al.

Summary: The skin, as the largest organ in the human body, plays a crucial role in maintaining balance and protection from external factors. The use of human bioengineered skin substitutes offers an alternative approach to treat large skin defects caused by burns or trauma, with different types available based on chemical composition and skin component. Advances in three-dimensional bioprinting techniques have also contributed to the development of skin substitutes for optimal wound healing.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

3D printed bone tissue regenerative PLA/HA scaffolds with comprehensive performance optimizations

Boqing Zhang et al.

Summary: This study successfully combined PLLH/nHA composite with FDM technology to prepare porous bone repair scaffolds. The scaffolds showed good printing smoothness and accuracy, suitable mechanical properties, and good osteogenic properties.

MATERIALS & DESIGN (2021)

Add to Collection

Review Cell & Tissue Engineering

Applications of 3D printed bone tissue engineering scaffolds in the stem cell field

Xin Su et al.

Summary: Regenerative medicine was born out of the need for organ and tissue replacement due to shortages, with 3D printed bone tissue engineering scaffolds combined with stem cells offering a solution to large tissue defects and promoting regeneration.

REGENERATIVE THERAPY (2021)

Add to Collection

Article Biochemical Research Methods

Emergent Biological Endurance Depends on Extracellular Matrix Composition of Three-Dimensionally Printed Escherichia coli Biofilms

Srikkanth Balasubramanian et al.

Summary: Biofilms are three-dimensional bacterial communities with a highly self-organized nature and resistance properties. The structural elements of biofilms play a crucial role in the development of their emergent biological properties.

ACS SYNTHETIC BIOLOGY (2021)

Add to Collection

Article Materials Science, Biomaterials

Generating adipose stem cell-laden hyaluronic acid-based scaffolds using 3D bioprinting via the double crosslinked strategy for chondrogenesis

Swathi Nedunchezian et al.

Summary: This study focuses on constructing printable bioinks by combining adipose-derived stem cells, hyaluronic acid-based hydrogels and analyzing their ability to induce chondrogenesis using 3D bioprinting technology. The results showed that the double cross-linked HBSAC hydrogel scaffold exhibited favorable structural integrity, printability, and chondrogenic differentiation compared to traditional HA hydrogel.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Article Biology

Matrigel 3D bioprinting of contractile human skeletal muscle models recapitulating exercise and pharmacological responses

Angela Alave Reyes-Furrer et al.

Summary: The researchers adapted a 3D bioprinting platform for microvalve-based drop-on-demand printing of cell-laden Matrigel containing primary human muscle precursor cells, which could aid in the development of drugs against muscle wasting diseases. This new method allows for automated engineering of 3D human skeletal muscle models in microplates and functional compound screening, addressing the lack of medication for muscle wasting diseases.

COMMUNICATIONS BIOLOGY (2021)

Add to Collection

Editorial Material Chemistry, Multidisciplinary

Advanced In Vitro Models for Replacement of Animal Experiments

Martin J. D. Clift et al.

SMALL (2021)

Add to Collection

Article Multidisciplinary Sciences

Utilization of patterned bioprinting for heterogeneous and physiologically representative reconstructed epidermal skin models

Sabrina Madiedo-Podvrsan et al.

Summary: Organotypic skin tissue models have been used for various research applications and treatment purposes for decades, but the complex nature of native human skin has posed challenges for constructing physiologically comparable models. This study demonstrates the successful utilization of bioprinting technology to create a reconstructed epidermis with two distinct halves, each composed of different keratinocyte subpopulations, showcasing the potential to reduce sample variability and mimic heterogeneous skin. Through the creation of a patterned epidermal skin model, the relevance and applicability of bioprinting for faithfully reproducing human skin microanatomy has been established.

SCIENTIFIC REPORTS (2021)

Add to Collection

Review Chemistry, Analytical

Recapitulating Cardiac Structure and Function In Vitro from Simple to Complex Engineering

Ana Rita M. P. Santos et al.

Summary: Cardiac tissue engineering aims to develop in vivo-like functional tissue for studying cardiac development, homeostasis, and regeneration by integrating technologies of cardiac cells, biomaterials, fabrication, and computational modeling. Progress in engineering techniques from simple to complex, including advancements in cardiomyocytes, extracellular matrix, geometry, and computational modeling, is crucial for preparing functional cardiac tissue in vitro. Understanding the complexity of the heart as a system at multiscale levels and the interactions among various techniques is essential for the development of a fully functional heart in cardiac tissue engineering.

MICROMACHINES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

3D bioprinting modified autologous matrix-induced chondrogenesis (AMIC) technique for repair of cartilage defects

Yang Zhou et al.

Summary: Utilizing 3D bioprinting technology to add CPCs and FN into Alg/Gel/HA composite hydrogel, a biofilm with uniform pores was prepared for repairing cartilage defects effectively by promoting chondrogenic differentiation of CPCs. This method resulted in regenerated laminar structure similar to natural hyaline cartilage in rat cartilage defect model, providing a new approach for cartilage defect repair.

MATERIALS & DESIGN (2021)

Add to Collection

Article Multidisciplinary Sciences

Robotic in situ 3D bio-printing technology for repairing large segmental bone defects

Lan Li et al.

Summary: The study successfully repaired long segmental bone defects using robotic in situ 3D bio-printing, demonstrating promising treatment effects and clinical application potential.

JOURNAL OF ADVANCED RESEARCH (2021)

Add to Collection

Review Engineering, Biomedical

Scaffold-based and scaffold-free cardiac constructs for drug testing

Kenichi Arai et al.

Summary: The safety and efficacy of new drugs are typically tested in animals, but differences in drug responses and potential cardiac side effects have led to many drug development projects being discontinued. Alternative methods to animal testing are needed. Tissue engineering techniques can create three-dimensional cardiac constructs from hiPSC-CMs, providing a new approach for drug screening.

BIOFABRICATION (2021)

Add to Collection

Review Polymer Science

Progress of 3D Bioprinting in Organ Manufacturing

Dabin Song et al.

Summary: Three-dimensional bioprinting technology can assemble biomaterials including cells and bioactive agents layer by layer, successfully printing living tissues and organs, significantly improving organ manufacturing capabilities.

POLYMERS (2021)

Add to Collection

Article Engineering, Biomedical

Fungal brain infection modelled in a human-neurovascular-unit-on-a-chip with a functional blood-brain barrier

Jin Kim et al.

Summary: A neurovascular-unit-on-a-chip with a functional blood-brain barrier is able to recapitulate the neurotropism and barrier penetration of the most common pathogen causing fungal meningitis. The model can study how pathogens can penetrate the human BBB and disrupt neuronal homeostasis. This microphysiological model may facilitate the study of brain infection mechanisms by pathogens and the development of drugs for brain diseases.

NATURE BIOMEDICAL ENGINEERING (2021)

Add to Collection

Review Materials Science, Biomaterials

Recent progress in extrusion 3D bioprinting of hydrogel biomaterials for tissue regeneration: a comprehensive review with focus on advanced fabrication techniques

Mohsen Askari et al.

Summary: This study summarizes the recent advances in 3D bioprinting for functional tissue development over the past decade, focusing on key parameters such as bioink selection, printing conditions, and tissue scaffold design. It highlights both challenges and opportunities, as well as the latest bioprinted scaffold technologies.

BIOMATERIALS SCIENCE (2021)

Add to Collection

Review Cell & Tissue Engineering

In vitro models of intestinal epithelium: Toward bioengineered systems

Justine Creff et al.

Summary: Recent advances in bioengineering have led to the development of various in vitro models to mimic the complex intestinal epithelium for studying fundamental mechanisms and drug screening. These microfabricated systems provide alternative approaches for understanding intestinal homeostasis and pathologies.

JOURNAL OF TISSUE ENGINEERING (2021)

Add to Collection

Article Engineering, Biomedical

3D printing PCL/nHA bone scaffolds: exploring the influence of material synthesis techniques

Amanda Zimmerling et al.

Summary: The study found that different techniques used to prepare materials can influence the printing process and post-printing scaffold properties. Melt-blended materials demonstrated good consistency and stability, while powder-blended materials performed better in terms of mechanical properties; liquid solvent materials had limited printability and minimal micro-porosity.

BIOMATERIALS RESEARCH (2021)

Add to Collection

Article Materials Science, Paper & Wood

3D printed hydrogels with oxidized cellulose nanofibers and silk fibroin for the proliferation of lung epithelial stem cells

Li Huang et al.

Summary: A novel biomaterial ink composed of regenerated silk fibroin and TEMPO-oxidized bacterial cellulose nanofibrils has been developed for 3D printing lung tissue scaffolds. The addition of OBC nanofibrils increased ink viscosity and improved scaffold shape fidelity, with optimal printing parameters identified as 0.3 bar printing pressure, 45 mm/s printing speed, and 410 μm nozzle diameter. OBC nanofibrils were aligned along print lines, guiding the orientation of lung epithelial stem cells and maintaining their proliferation ability and epithelial phenotype after 7 days of culture.

CELLULOSE (2021)

Add to Collection

Article Engineering, Biomedical

3D-printed HA15-loaded beta-Tricalcium Phosphate/Poly (Lactic-co-glycolic acid) Bone Tissue Scaffold Promotes Bone Regeneration in Rabbit Radial Defects

Chuanchuan Zheng et al.

Summary: The study demonstrates that the scaffold loaded with HA15 can promote osteoblast differentiation, repair rabbit bone defects, and promote blood vessel regeneration. HA15 targets HSPA5 to inhibit endoplasmic reticulum stress, ultimately promoting osteogenesis, bone regeneration, and angiogenesis.

INTERNATIONAL JOURNAL OF BIOPRINTING (2021)

Add to Collection

Review Engineering, Biomedical

In situ bioprinting - Bioprinting from benchside to bedside?

Satnam Singh et al.

ACTA BIOMATERIALIA (2020)

Add to Collection

Article Engineering, Biomedical

In vitro and in vivo evaluation of 3D bioprinted small-diameter vasculature with smooth muscle and endothelium

Haitao Cui et al.

BIOFABRICATION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Role of Biomaterials and Controlled Architecture on Tendon/Ligament Repair and Regeneration

Young Jung No et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Surgery

OPTN/SRTR 2018 Annual Data Report: Lung

M. Valapour et al.

AMERICAN JOURNAL OF TRANSPLANTATION (2020)

Add to Collection

Article Surgery

OPTN/SRTR 2018 Annual Data Report: Deceased Organ Donation

A. K. Israni et al.

AMERICAN JOURNAL OF TRANSPLANTATION (2020)

Add to Collection

Review Engineering, Biomedical

Progress in 3D bioprinting technology for tissue/organ regenerative engineering

Ishita Matai et al.

BIOMATERIALS (2020)

Add to Collection

Article Engineering, Biomedical

Three-dimensional cell-printing of advanced renal tubular tissue analogue

Narendra K. Singh et al.

BIOMATERIALS (2020)

Add to Collection

Article Materials Science, Biomaterials

Biofabrication of valentine-shaped heart with a composite hydrogel and sacrificial material

Qiang Zou et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Add to Collection

Article Cell & Tissue Engineering

Three Dimensional Bioprinting of a Vascularized and Perfusable Skin Graft Using Human Keratinocytes, Fibroblasts, Pericytes, and Endothelial Cells

Tania Baltazar et al.

TISSUE ENGINEERING PART A (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting

Yang Wu et al.

TRENDS IN BIOTECHNOLOGY (2020)

Add to Collection

Review Pharmacology & Pharmacy

Development of 3D bioprinting: From printing methods to biomedical applications

Zeming Gu et al.

ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

3D Bioprinting Pluripotent Stem Cell Derived Neural Tissues Using a Novel Fibrin Bioink Containing Drug Releasing Microspheres

Ruchi Sharma et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

In situ Enabling Approaches for Tissue Regeneration: Current Challenges and New Developments

Juliana R. Dias et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

3D Bioprinting of Carbohydrazide-Modified Gelatin into Microparticle-Suspended Oxidized Alginate for the Fabrication of Complex-Shaped Tissue Constructs

Dong Nyoung Heo et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Extracellular Matrix/Amorphous Magnesium Phosphate Bioink for 3D Bioprinting of Craniomaxillofacial Bone Tissue

Nileshkumar Dubey et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications

Claire Yu et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Bioprinting: From Tissue and Organ Development to in Vitro Models

Carlos Mota et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Polymeric Systems for Bioprinting

Matthew L. Bedell et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Cardiac & Cardiovascular Systems

In Situ Expansion, Differentiation, and Electromechanical Coupling of Human Cardiac Muscle in a 3D Bioprinted, Chambered Organoid

Molly E. Kupfer et al.

CIRCULATION RESEARCH (2020)

Add to Collection

Article Engineering, Biomedical

Direct-write 3D printing and characterization of a GelMA-based biomaterial for intracorporeal tissue

A. Asghari Adib et al.

BIOFABRICATION (2020)

Add to Collection

Article Multidisciplinary Sciences

3D printing of conducting polymers

Hyunwoo Yuk et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

Vascularized cardiac tissue construction with orientation by layer-by-layer method and 3D printer

Yoshinari Tsukamoto et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Engineering, Biomedical

Scaffold-Free Bio-3D Printing Using Spheroids as Bio-Inks for Tissue (Re-)Construction and Drug Response Tests

Daiki Murata et al.

ADVANCED HEALTHCARE MATERIALS (2020)

Add to Collection

Article Engineering, Biomedical

Orthotopic Bone Regeneration within 3D Printed Bioceramic Scaffolds with Region-Dependent Porosity Gradients in an Equine Model

Paweena Diloksumpan et al.

ADVANCED HEALTHCARE MATERIALS (2020)

Add to Collection

News Item Biotechnology & Applied Microbiology

The pandemic pipeline

John Hodgson

NATURE BIOTECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Application of robotic-assisted in situ 3D printing in cartilage regeneration with HAMA hydrogel: An in vivo study

Kaiwei Ma et al.

JOURNAL OF ADVANCED RESEARCH (2020)

Add to Collection

Article Cell Biology

Three-dimensional bioprinted glioblastoma microenvironments model cellular dependencies and immune interactions

Min Tang et al.

CELL RESEARCH (2020)

Add to Collection

Article Orthopedics

Antimicrobial properties of antibiotic-loaded implants A COMPARATIVE STUDY OF ANTIMICROBIAL PROPERTIES OF ANTIBIOTIC-LOADED CEMENT, TANTALUM, 3D-PRINTED POROUS TITANIUM, AND TITANIUM ALLOY

Q. Griseti et al.

BONE & JOINT JOURNAL (2020)

Add to Collection

Editorial Material Nanoscience & Nanotechnology

The global rise of 3D printing during the COVID-19 pandemic

Yu Ying Clarrisa Choong et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

4D physiologically adaptable cardiac patch: A 4-month in vivo study for the treatment of myocardial infarction

Haitao Cui et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Engineering, Biomedical

Generation of model tissues with dendritic vascular networks via sacrificial laser-sintered carbohydrate templates

Ian S. Kinstlinger et al.

NATURE BIOMEDICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Biomedical

Intravital three-dimensional bioprinting

Anna Urciuolo et al.

NATURE BIOMEDICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Biomedical

Highly tunable bioactive fiber-reinforced hydrogel for guided bone regeneration

Nileshkumar Dubey et al.

ACTA BIOMATERIALIA (2020)

Add to Collection

Review Engineering, Biomedical

Challenges on optimization of 3D-printed bone scaffolds

Marjan Bahraminasab

BIOMEDICAL ENGINEERING ONLINE (2020)

Add to Collection

Article Multidisciplinary Sciences

3D printing of multi-scalable structures via high penetration near-infrared photopolymerization

Junzhe Zhu et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

A 3D Bioprinter Specifically Designed for the High-Throughput Production of Matrix-Embedded Multicellular Spheroids

Robert H. Utama et al.

ISCIENCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Biodegradable Scaffolds for Urethra Tissue Engineering Based on 3D Printing

Yifan Xu et al.

ACS APPLIED BIO MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

3D Biomimetic Tongue-Emulating Surfaces for Tribological Applications

Efren Andablo-Reyes et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Virology

Simplified Bioprinting-Based 3D Cell Culture Infection Models for Virus Detection

Robert Koban et al.

VIRUSES-BASEL (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

Toward Biomimetic Scaffolds for Tissue Engineering: 3D Printing Techniques in Regenerative Medicine

Justin J. Chung et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Review Engineering, Biomedical

Applications of 3D Bioprinted-Induced Pluripotent Stem Cells in Healthcare

Soja Saghar Soman et al.

INTERNATIONAL JOURNAL OF BIOPRINTING (2020)

Add to Collection

Review Materials Science, Multidisciplinary

3D bioprinting for the endocrine glands

Mervesu Gokyurek et al.

EMERGENT MATERIALS (2020)

Add to Collection

Article Materials Science, Biomaterials

Cell loaded 3D bioprinted GelMA hydrogels for corneal stroma engineering

Cemile Kilic Bektas et al.

BIOMATERIALS SCIENCE (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

Innovative Human Three-Dimensional Tissue-Engineered Models as an Alternative to Animal Testing

Patrick Bedard et al.

BIOENGINEERING-BASEL (2020)

Add to Collection

Article Engineering, Biomedical

Emergence of functional neuromuscular junctions in an engineered, multicellular spinal cord-muscle bioactuator

C. D. Kaufman et al.

APL BIOENGINEERING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ Printing of Adhesive Hydrogel Scaffolds for the Treatment of Skeletal Muscle Injuries

Carina S. Russell et al.

ACS APPLIED BIO MATERIALS (2020)

Add to Collection

Article Engineering, Biomedical

Handheld instrument for wound-conformal delivery of skin precursor sheets improves healing in full-thickness burns

Richard Y. Cheng et al.

BIOFABRICATION (2020)

Add to Collection

Article Medicine, Research & Experimental

3D printed in vitro tumor tissue model of colorectal cancer

Haoxiang Chen et al.

THERANOSTICS (2020)

Add to Collection

Review Engineering, Biomedical

3D printing of bone tissue engineering scaffolds

Chong Wang et al.

BIOACTIVE MATERIALS (2020)

Add to Collection

Review Neurosciences

Brain mapping in multiple sclerosis: Lessons learned about the human brain

Massimo Filippi et al.

NEUROIMAGE (2019)

Add to Collection

Article Engineering, Biomedical

3D printing of a lithium-calcium-silicate crystal bioscaffold with dual bioactivities for osteochondral interface reconstruction

Lei Chen et al.

BIOMATERIALS (2019)

Add to Collection

Article Engineering, Multidisciplinary

3D printing of bone scaffolds with hybrid biomaterials

Bankole I. Oladapo et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Biomedical

Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix

Claire Yu et al.

BIOMATERIALS (2019)

Add to Collection

Review Nanoscience & Nanotechnology

3D printing approaches for cardiac tissue engineering and role of immune modulation in tissue regeneration

Muhammad Qasim et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2019)

Add to Collection

Review Surgery

Emerging technologies in organ preservation, tissue engineering and regenerative medicine: a blessing or curse for transplantation?

Franka Messner et al.

TRANSPLANT INTERNATIONAL (2019)

Add to Collection

Article Engineering, Biomedical

Mouse in vitro spermatogenesis on alginate-based 3D bioprinted scaffolds

Yoni Baert et al.

BIOFABRICATION (2019)

Add to Collection

Article Multidisciplinary Sciences

In Situ Bioprinting of Autologous Skin Cells Accelerates Wound Healing of Extensive Excisional Full-Thickness Wounds

Mohammed Albanna et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Engineering, Biomedical

A bioprinted human-glioblastoma-on-a-chip for the identification of patient-specific responses to chemoradiotherapy

Hee-Gyeong Yi et al.

NATURE BIOMEDICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Biomedical

Decellularized extracellular matrix bioinks and the external stimuli to enhance cardiac tissue development in vitro

Sanskrita Das et al.

ACTA BIOMATERIALIA (2019)

Add to Collection

Review Engineering, Biomedical

4D Printing and Stimuli-responsive Materials in Biomedical Applications

Yuan Siang Lui et al.

ACTA BIOMATERIALIA (2019)

Add to Collection

Article Cell & Tissue Engineering

Fully Three-Dimensional Bioprinted Skin Equivalent Constructs with Validated Morphology and Barrier Function

Kristy Derr et al.

TISSUE ENGINEERING PART C-METHODS (2019)

Add to Collection

Review Medical Laboratory Technology

3D Bioprinting of cardiac tissue and cardiac stem cell therapy

Matthew Alonzo et al.

TRANSLATIONAL RESEARCH (2019)

Add to Collection

Editorial Material Engineering, Biomedical

Building Blocks for Biofabricated Models

Jos Malda et al.

ADVANCED HEALTHCARE MATERIALS (2019)

Add to Collection

Review Pharmacology & Pharmacy

Cardiac fibrosis - A short review of causes and therapeutic strategies

Svenja Hinderer et al.

ADVANCED DRUG DELIVERY REVIEWS (2019)

Add to Collection

Article Engineering, Environmental

A functional bioink and its application in myoblast alignment and differentiation

WonJin Kim et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Engineering, Biomedical

3D bioprinting of mature bacterial biofilms for antimicrobial resistance drug testing

Evita Ning et al.

BIOFABRICATION (2019)

Add to Collection

Article Biochemical Research Methods

3D Printing for the Fabrication of Biofilm-Based Functional Living Materials

Srikkanth Balasubramanian et al.

ACS SYNTHETIC BIOLOGY (2019)

Add to Collection

Review Biotechnology & Applied Microbiology

3D and 4D Printing of Polymers for Tissue Engineering Applications

Dilara Goksu Tamay et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)

Add to Collection

Article Engineering, Biomedical

3D bioprinted endometrial stem cells on melt electrospun poly ε-caprolactone mesh for pelvic floor application promote anti-inflammatory responses in mice

Kallyanashis Paul et al.

ACTA BIOMATERIALIA (2019)

Add to Collection

Article Multidisciplinary Sciences

Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels

Mark A. Skylar-Scott et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Cell Biology

Bioink Composition and Printing Parameters for 3D Modeling Neural Tissue

Valentina Fantini et al.

CELLS (2019)

Add to Collection

Review Neurosciences

Construction of 3D in vitro models by bioprinting human pluripotent stem cells: Challenges and opportunities

Federico Salaris et al.

BRAIN RESEARCH (2019)

Add to Collection

Review Biochemistry & Molecular Biology

Current and Future Concepts for the Treatment of Impaired Fracture Healing

Carsten W. Schlickewei et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)

Add to Collection

Article Multidisciplinary Sciences

Shape-shifting structured lattices via multimaterial 4D printing

J. William Boley et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

Add to Collection

Article Medicine, General & Internal

3D Bioprinted Human Cortical Neural Constructs Derived from Induced Pluripotent Stem Cells

Federico Salaris et al.

JOURNAL OF CLINICAL MEDICINE (2019)

Add to Collection

Article Biotechnology & Applied Microbiology

Rapid microevolution of biofilm cells in response to antibiotics

Anahit Penesyan et al.

NPJ BIOFILMS AND MICROBIOMES (2019)

Add to Collection

Article Engineering, Biomedical

Opportunities and challenges of translational 3D bioprinting

Sean V. Murphy et al.

Nature Biomedical Engineering (2019)

Add to Collection

Article Engineering, Biomedical

3D bioprinted glioma cell-laden scaffolds enriching glioma stem cells via epithelial-mesenchymal transition

Xuanzhi Wang et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic effect of alginate/BMP-2/Umbilical cord serum-coated on 3D-printed PCL biocomposite for mastoid obliteration model

Chul Ho Jang et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Fabrication of Kidney Proximal Tubule Grafts Using Biofunctionalized Electrospun Polymer Scaffolds

Katja Jansen et al.

MACROMOLECULAR BIOSCIENCE (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Biomimetic 3D-printed scaffolds for spinal cord injury repair

Jacob Koffler et al.

NATURE MEDICINE (2019)

Add to Collection

Article Materials Science, Biomaterials

3D Printing of Neural Tissues Derived from Human Induced Pluripotent Stem Cells Using a Fibrin-Based Bioink

Emily Abelseth et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

Add to Collection

Article Engineering, Biomedical

In situ prevascularization designed by laser-assisted bioprinting: effect on bone regeneration

Olivia Kerouredan et al.

BIOFABRICATION (2019)

Add to Collection

Article Biochemical Research Methods

Effective bioprinting resolution in tissue model fabrication

Amir K. Miri et al.

LAB ON A CHIP (2019)

Add to Collection

Article Biotechnology & Applied Microbiology

Scalable 3D Printed Molds for Human Tissue Engineered Skeletal Muscle

Andrew J. Capel et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)

Add to Collection

Review Cardiac & Cardiovascular Systems

3D Cardiac Cell Culture: A Critical Review of Current Technologies and Applications

Christian Zuppinger

FRONTIERS IN CARDIOVASCULAR MEDICINE (2019)

Add to Collection

Article Dermatology

Bioprinting of biomimetic skin containing melanocytes

Daejin Min et al.

EXPERIMENTAL DERMATOLOGY (2018)

Add to Collection

Article Cell & Tissue Engineering

In situ handheld three-dimensional bioprinting for cartilage regeneration

Claudia Di Bella et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2018)

Add to Collection

Article Engineering, Biomedical

Cell reprogramming by 3D bioprinting of human fibroblasts in polyurethane hydrogel for fabrication of neural-like constructs

Lin Ho et al.

ACTA BIOMATERIALIA (2018)

Add to Collection

Review Pharmacology & Pharmacy

3D printed drug delivery and testing systems - a passing fad or the future?

Seng Han Lim et al.

ADVANCED DRUG DELIVERY REVIEWS (2018)

Add to Collection

Article Engineering, Biomedical

Human stem cell based corneal tissue mimicking structures using laser-assisted 3D bioprinting and functional bioinks

Anni Sorkio et al.

BIOMATERIALS (2018)

Add to Collection

Article Engineering, Biomedical

Transcutaneously refillable, 3D-printed biopolymeric encapsulation system for the transplantation of endocrine cells

Marco Farina et al.

BIOMATERIALS (2018)

Add to Collection

Article Engineering, Biomedical

3D cell printing of in vitro stabilized skin model and in vivo pre-vascularized skin patch using tissue-specific extracellular matrix bioink: A step towards advanced skin tissue engineering

Byoung Soo Kim et al.

BIOMATERIALS (2018)

Add to Collection

Article Engineering, Biomedical

3D-Printed membrane as an alternative to amniotic membrane for ocular surface/conjunctival defect reconstruction: An in vitro & in vivo study

Shima Dehghani et al.

BIOMATERIALS (2018)

Add to Collection

Article Engineering, Biomedical

Engineering innervated secretory epithelial organoids by magnetic three-dimensional bioprinting for stimulating epithelial growth in salivary glands

Christabella Adine et al.

BIOMATERIALS (2018)

Add to Collection

Article Cell Biology

Long-term Culture of Human iPS Cell-derived Telencephalic Neuron Aggregates on Collagen Gel

Hiroshi Oyama et al.

CELL STRUCTURE AND FUNCTION (2018)

Add to Collection

Article Biophysics

In vitro characterization of 3D printed scaffolds aimed at bone tissue regeneration

Joao C. Boga et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2018)

Add to Collection

Article Biophysics

Coaxial extrusion bioprinted shell-core hydrogel microfibers mimic glioma microenvironment and enhance the drug resistance of cancer cells

Xuanzhi Wang et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2018)

Add to Collection

Article Ophthalmology

3D bioprinting of a corneal stroma equivalent

Abigail Isaacson et al.

EXPERIMENTAL EYE RESEARCH (2018)

Add to Collection

Article Biochemistry & Molecular Biology

3D Bioprinted Artificial Trachea with Epithelial Cells and Chondrogenic-Differentiated Bone Marrow-Derived Mesenchymal Stem Cells

Sang-Woo Bae et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Nano-biphasic calcium phosphate/polyvinyl alcohol composites with enhanced bioactivity for bone repair via low-temperature three-dimensional printing and loading with platelet-rich fibrin

Yue Song et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2018)

Add to Collection

Article Engineering, Multidisciplinary

Fabrication of 3D Printed PCL/PEG Polyblend Scaffold Using Rapid Prototyping System for Bone Tissue Engineering Application

Su A. Park et al.

JOURNAL OF BIONIC ENGINEERING (2018)

Add to Collection

Article Engineering, Biomedical

3D printing nano conductive multi-walled carbon nanotube scaffolds for nerve regeneration

Se-Jun Lee et al.

JOURNAL OF NEURAL ENGINEERING (2018)

Add to Collection

Article Biochemical Research Methods

Handheld skin printer: in situ formation of planar biomaterials and tissues

Navid Hakimi et al.

LAB ON A CHIP (2018)

Add to Collection

Article Materials Science, Multidisciplinary

3D-printed thick structured gelatin membrane for engineering of heterogeneous tissues

Lobat Tayebi et al.

MATERIALS LETTERS (2018)

Add to Collection

Article Cell & Tissue Engineering

UV-Assisted 3D Bioprinting of Nanoreinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering

Mohammad Izadifar et al.

TISSUE ENGINEERING PART C-METHODS (2018)

Add to Collection

Article Multidisciplinary Sciences

An integrated multi-layer 3D-fabrication of PDA/RGD coated graphene loaded PCL nanoscaffold for peripheral nerve restoration

Yun Qian et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Engineering, Biomedical

From ideas to long-term studies: 3D printing clinical trials review

Jan Witowski et al.

INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2018)

Add to Collection

Article Biochemical Research Methods

Printing of Patterned, Engineered E. coil Biofilms with a Low-Cost 3D Printer

Dominik T. Schmieden et al.

ACS SYNTHETIC BIOLOGY (2018)

Add to Collection

Article Cardiac & Cardiovascular Systems

Scaffold-free trachea regeneration by tissue engineering with bio-3D printing

Daisuke Taniguchi et al.

INTERACTIVE CARDIOVASCULAR AND THORACIC SURGERY (2018)

Add to Collection

Review Nanoscience & Nanotechnology

Biofabrication strategies for 3D in vitro models and regenerative medicine

Lorenzo Moroni et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Review Cell & Tissue Engineering

Bone substitutes: a review of their characteristics, clinical use, and perspectives for large bone defects management

Gabriel Fernandez de Grado et al.

JOURNAL OF TISSUE ENGINEERING (2018)

Add to Collection

Article Multidisciplinary Sciences

Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique

Jan Schoeneberg et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Multidisciplinary Sciences

A multi-cellular 3D bioprinting approach for vascularized heart tissue engineering based on HUVECs and iPSC-derived cardiomyocytes

Fabio Maiullari et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Multidisciplinary Sciences

Optimization of cell-laden bioinks for 3D bioprinting and efficient infection with influenza A virus

Johanna Berg et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Review Cell & Tissue Engineering

Advances in Regenerative Medicine and Tissue Engineering: Innovation and Transformation of Medicine

Kevin Dzobo et al.

STEM CELLS INTERNATIONAL (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Generation of a 3D Liver Model Comprising Human Extracellular Matrix in an Alginate/Gelatin-Based Bioink by Extrusion Bioprinting for Infection and Transduction Studies

Thomas Hiller et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)

Add to Collection

Article Multidisciplinary Sciences

Fabrication of scaffold-free tubular cardiac constructs using a Bio-3D printer

Kenichi Arai et al.

PLOS ONE (2018)

Add to Collection

Article Multidisciplinary Sciences

Tissue engineering of human hair follicles using a biomimetic developmental approach

Hasan Erbil Abaci et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Materials Science, Biomaterials

3D Bioprinting of Breast Cancer Models for Drug Resistance Study

Ying Wang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

3D Bioprinting Human Induced Pluripotent Stem Cell-Derived Neural Tissues Using a Novel Lab-on-a-Printer Technology

Laura de la Vega et al.

APPLIED SCIENCES-BASEL (2018)

Add to Collection

Article Multidisciplinary Sciences

Bioprinted 3D Primary Human Intestinal Tissues Model Aspects of Native Physiology and ADME/Tox Functions

Lauran R. Madden et al.

ISCIENCE (2018)

Add to Collection

Review Health Care Sciences & Services

3D printing materials and their use in medical education: a review of current technology and trends for the future

Justine Garcia et al.

BMJ SIMULATION & TECHNOLOGY ENHANCED LEARNING (2018)

Add to Collection

Article Engineering, Biomedical

Proof-of-concept: 3D bioprinting of pigmented human skin constructs

Wei Long Ng et al.

BIOFABRICATION (2018)

Add to Collection

Article Engineering, Biomedical

Contact guidance for cardiac tissue engineering using 3D bioprinted gelatin patterned hydrogel

Ajay Tijore et al.

BIOFABRICATION (2018)

Add to Collection

Review Engineering, Biomedical

Recent Advances in Biomaterials for 3D Printing and Tissue Engineering

Udayabhanu Jammalamadaka et al.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)

Add to Collection

Review Cardiac & Cardiovascular Systems

New therapies for acute myocardial infarction: current state of research and future promise

Romain Itier et al.

FUTURE CARDIOLOGY (2018)

Add to Collection

Article Engineering, Biomedical

3D printing of PLGA scaffolds for tissue engineering

Anton V. Mironov et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)

Add to Collection

Article Engineering, Biomedical

A tunable hydrogel system for long-term release of cell-secreted cytokines and bioprinted in situ wound cell delivery

Aleksander Skardal et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)

Add to Collection

Article Biochemistry & Molecular Biology

3D Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering

Chee Meng Benjamin Ho et al.

MACROMOLECULAR BIOSCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing

Johan U. Lind et al.

NATURE MATERIALS (2017)

Add to Collection

Article Engineering, Biomedical

Human Skin 3D Bioprinting Using Scaffold-Free Approach

Lea J. Pourchet et al.

ADVANCED HEALTHCARE MATERIALS (2017)

Add to Collection

Article Materials Science, Biomaterials

3D Printed Stem-Cell-Laden, Microchanneled Hydrogel Patch for the Enhanced Release of Cell-Secreting Factors and Treatment of Myocardial Infarctions

Molly R. Melhem et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)

Add to Collection

Article Materials Science, Biomaterials

3D Printed Stem-Cell-Laden, Microchanneled Hydrogel Patch for the Enhanced Release of Cell-Secreting Factors and Treatment of Myocardial Infarctions

Molly R. Melhem et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)

Add to Collection

Article Medicine, Research & Experimental

Toward improved myocardial maturity in an organ-on-chip platform with immature cardiac myocytes

Sean P. Sheehy et al.

EXPERIMENTAL BIOLOGY AND MEDICINE (2017)

Add to Collection

Article Biochemistry & Molecular Biology

A New Bone Substitute Developed from 3D-Prints of Polylactide (PLA) Loaded with Collagen I: An In Vitro Study

Ulrike Ritz et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)

Add to Collection

Article Materials Science, Biomaterials

In-vivo characterization of a 3D hybrid scaffold based on PCL/decellularized aorta for tracheal tissue engineering

Fariba Ghorbani et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Tissue engineering by decellularization and 3D bioprinting

Elena Garreta et al.

MATERIALS TODAY (2017)

Add to Collection

Article Biotechnology & Applied Microbiology

The promise of organ and tissue preservation to transform medicine

Sebastian Giwa et al.

NATURE BIOTECHNOLOGY (2017)

Add to Collection

Article Cardiac & Cardiovascular Systems

Cardiac 3D Printing and its Future Directions

Marija Vukicevic et al.

JACC-CARDIOVASCULAR IMAGING (2017)

Add to Collection

Editorial Material Biochemical Research Methods

Rapid prototyping using 3D printing in bioanalytical research

Chengsen Zhang et al.

BIOANALYSIS (2017)

Add to Collection

Review Cell & Tissue Engineering

Alzheimer's disease, dementia, and stem cell therapy

Thomas Duncan et al.

STEM CELL RESEARCH & THERAPY (2017)

Add to Collection

Article Engineering, Biomedical

Pro-Regenerative Hydrogel Restores Scarless Skin during Cutaneous Wound Healing

Guoming Sun

ADVANCED HEALTHCARE MATERIALS (2017)

Add to Collection

Article Engineering, Biomedical

Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue

Batzaya Byambaa et al.

ADVANCED HEALTHCARE MATERIALS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Tissue engineering toward organ-specific regeneration and disease modeling

Christian Mandrycky et al.

MRS COMMUNICATIONS (2017)

Add to Collection

Article Multidisciplinary Sciences

Human intestinal tract serves as an alternative infection route for Middle East respiratory syndrome coronavirus

Jie Zhou et al.

SCIENCE ADVANCES (2017)

Add to Collection

Article Multidisciplinary Sciences

In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications

Virginie Keriquel et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Multidisciplinary Sciences

Cryogenic 3D Printing of Super Soft Hydrogels

Zhengchu Tan et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Multidisciplinary Sciences

Microscale Bioreactors for in situ characterization of GI epithelial cell physiology

Cait M. Costello et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

4D Biofabrication Using Shape-Morphing Hydrogels

Alina Kirillova et al.

ADVANCED MATERIALS (2017)

Add to Collection

Review Engineering, Biomedical

Regenerating bone with bioactive glass scaffolds: A review of in vivo studies in bone defect models

Aiah A. El-Rashidy et al.

ACTA BIOMATERIALIA (2017)

Add to Collection

Article Engineering, Biomedical

Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo

Marco Costantini et al.

BIOMATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Polyvinylpyrrolidone-Based Bio-Ink Improves Cell Viability and Homogeneity during Drop-On-Demand Printing

Wei Long Ng et al.

MATERIALS (2017)

Add to Collection

Article Engineering, Biomedical

Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture

Wei Zhu et al.

BIOMATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink

Cristina Colosi et al.

ADVANCED MATERIALS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Strategies and Molecular Design Criteria for 3D Printable Hydrogels

Tomasz Jungst et al.

CHEMICAL REVIEWS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study

Xuan Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Engineering, Biomedical

3D bioprinted extracellular matrix mimics facilitate directed differentiation of epithelial progenitors for sweat gland regeneration

Sha Huang et al.

ACTA BIOMATERIALIA (2016)

Add to Collection

Article Chemistry, Analytical

A novel approach for precisely controlled multiple cell patterning in microfluidic chips by inkjet printing and the detection of drug metabolism and diffusion

Jie Zhang et al.

ANALYST (2016)

Add to Collection

Article Engineering, Biomedical

Direct 3D bioprinting of perfusable vascular constructs using a blend bioink

Weitao Jia et al.

BIOMATERIALS (2016)

Add to Collection

Article Engineering, Biomedical

Inhibition of tumor growth and metastasis by photoimmunotherapy targeting tumor-associated macrophage in a sorafenib-resistant tumor model

Chenran Zhang et al.

BIOMATERIALS (2016)

Add to Collection

Review Biotechnology & Applied Microbiology

3D bioprinting for engineering complex tissues

Christian Mandrycky et al.

BIOTECHNOLOGY ADVANCES (2016)

Add to Collection

Article Pharmacology & Pharmacy

Fabrication of non-dissolving analgesic suppositories using 3D printed moulds

Yuanyuan Sun et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)

Add to Collection

Article Engineering, Biomedical

Fabrication and evaluation of electrohydrodynamic jet 3D printed polycaprolactone/chitosan cell carriers using human embryonic stem cell-derived fibroblasts

Yang Wu et al.

JOURNAL OF BIOMATERIALS APPLICATIONS (2016)

Add to Collection

Article Cardiac & Cardiovascular Systems

Development of a three-dimensional pre-vascularized scaffold-free contractile cardiac patch for treating heart disease

Ryo Noguchi et al.

JOURNAL OF HEART AND LUNG TRANSPLANTATION (2016)

Add to Collection

Review Medicine, Research & Experimental

Recent advances in bioprinting techniques: approaches, applications and future prospects

Jipeng Li et al.

JOURNAL OF TRANSLATIONAL MEDICINE (2016)

Add to Collection

Review Biochemistry & Molecular Biology

Biodegradable Polymers and Stem Cells for Bioprinting

Meijuan Lei et al.

MOLECULES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

3D printed nanocomposite matrix for the study of breast cancer bone metastasis

Wei Zhu et al.

NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2016)

Add to Collection

Article Biotechnology & Applied Microbiology

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity

Hyun-Wook Kang et al.

NATURE BIOTECHNOLOGY (2016)

Add to Collection

Review Clinical Neurology

HIV-associated neurocognitive disorder - pathogenesis and prospects for treatment

Deanna Saylor et al.

NATURE REVIEWS NEUROLOGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting

Xuanyi Ma et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Add to Collection

Review Polymer Science

Advancing biomaterials of human origin for tissue engineering

Fa-Ming Chen et al.

PROGRESS IN POLYMER SCIENCE (2016)

Add to Collection

Editorial Material Biotechnology & Applied Microbiology

A Bioprinted Liver-on-a-Chip for Drug Screening Applications

Stephanie Knowlton et al.

TRENDS IN BIOTECHNOLOGY (2016)

Add to Collection

Review Biotechnology & Applied Microbiology

4D Bioprinting for Biomedical Applications

Bin Gao et al.

TRENDS IN BIOTECHNOLOGY (2016)

Add to Collection

Review Engineering, Biomedical

Design and Printing Strategies in 3D Bioprinting of Cell-Hydrogels: A Review

Jia Min Lee et al.

ADVANCED HEALTHCARE MATERIALS (2016)

Add to Collection

Article Engineering, Biomedical

Functional 3D Neural Mini-Tissues from Printed Gel-Based Bioink and Human Neural Stem Cells

Qi Gu et al.

ADVANCED HEALTHCARE MATERIALS (2016)

Add to Collection

Article Cardiac & Cardiovascular Systems

Tissue-engineered artificial oesophagus patch using three-dimensionally printed polycaprolactone with mesenchymal stem cells: a preliminary report

Seong Yong Park et al.

INTERACTIVE CARDIOVASCULAR AND THORACIC SURGERY (2016)

Add to Collection

Review Polymer Science

3D Printing of Scaffold for Cells Delivery: Advances in Skin Tissue Engineering

Deepti Singh et al.

POLYMERS (2016)

Add to Collection

Article Multidisciplinary Sciences

Bioengineering a 3D integumentary organ system from iPS cells using an in vivo transplantation model

Ryoji Takagi et al.

SCIENCE ADVANCES (2016)

Add to Collection

Article Multidisciplinary Sciences

Bioprinted 3D Primary Liver Tissues Allow Assessment of Organ-Level Response to Clinical Drug Induced Toxicity In Vitro

Deborah G. Nguyen et al.

PLOS ONE (2016)

Add to Collection

Article Multidisciplinary Sciences

A high-throughput in vitro ring assay for vasoactivity using magnetic 3D bioprinting

Hubert Tseng et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Engineering, Biomedical

A liver-on-a-chip platform with bioprinted hepatic spheroids

Nupura S. Bhise et al.

BIOFABRICATION (2016)

Add to Collection

Article Engineering, Biomedical

Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering

Jin Woo Lee et al.

BIOFABRICATION (2016)

Add to Collection

Article Engineering, Biomedical

3D bioprinted glioma stem cells for brain tumor model and applications of drug susceptibility

Xingliang Dai et al.

BIOFABRICATION (2016)

Add to Collection

Article Engineering, Biomedical

A versatile method for combining different biopolymers in a core/shell fashion by 3D plotting to achieve mechanically robust constructs

Ashwini Rahul Akkineni et al.

BIOFABRICATION (2016)

Add to Collection

Article Engineering, Biomedical

3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation

Marco Costantini et al.

BIOFABRICATION (2016)

Add to Collection

Article Biochemical Research Methods

Standardized 3D Bioprinting of Soft Tissue Models with Human Primary Cells

Markus Rimann et al.

JALA (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials

Matti Kesti et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Anatomical Nerve Regeneration Pathways

Blake N. Johnson et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Biochemistry & Molecular Biology

3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications

Kajsa Markstedt et al.

BIOMACROMOLECULES (2015)

Add to Collection

Article Engineering, Biomedical

3D bioprinting of neural stern cell-laden thermoresponsive biodegradable polyurethane hydrogel and potential in central nervous system repair

Fu-Yu Hsieh et al.

BIOMATERIALS (2015)

Add to Collection

Article Engineering, Biomedical

Differentiated tonsil-derived mesenchymal stem cells embedded in Matrigel restore parathyroid cell functions in rats with parathyroidectomy

Yoon Shin Park et al.

BIOMATERIALS (2015)

Add to Collection

Article Engineering, Biomedical

3D printing of layered brain-like structures using peptide modified gellan gum substrates

Rodrigo Lozano et al.

BIOMATERIALS (2015)

Add to Collection

Article Engineering, Biomedical

Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction

Roberto Gaetani et al.

BIOMATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Programmable Release Capsules

Maneesh K. Gupta et al.

NANO LETTERS (2015)

Add to Collection

Editorial Material Clinical Neurology

Extracellular matrix in the CNS Dynamic structure and clinical correlations

Eduardo E. Benarroch

NEUROLOGY (2015)

Add to Collection

Article Neurosciences

Oligodendrocytes in a Nutshell

John-Paul Michalski et al.

Frontiers in Cellular Neuroscience (2015)

Add to Collection

Article Multidisciplinary Sciences

Reinforcement of hydrogels using three-dimensionally printed microfibres

Jetze Visser et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Engineering, Biomedical

Generation and Assessment of Functional Biomaterial Scaffolds for Applications in Cardiovascular Tissue Engineering and Regenerative Medicine

Svenja Hinderer et al.

ADVANCED HEALTHCARE MATERIALS (2015)

Add to Collection

Review Engineering, Biomedical

3D Printing of Scaffolds for Tissue Regeneration Applications

Anh-Vu Do et al.

ADVANCED HEALTHCARE MATERIALS (2015)

Add to Collection

Article Materials Science, Biomaterials

Biofabrication of reinforced 3D-scaffolds using two-component hydrogels

Kristel W. M. Boere et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

Add to Collection

Review Engineering, Multidisciplinary

Bioprinting-Based High-Throughput Fabrication of Three-Dimensional MCF-7 Human Breast Cancer Cellular Spheroids

Kai Ling et al.

ENGINEERING (2015)

Add to Collection

Article Engineering, Biomedical

Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D

Alan Faulkner-Jones et al.

BIOFABRICATION (2015)

Add to Collection

Article Engineering, Biomedical

A 3D bioprinted complex structure for engineering the muscle-tendon unit

Tyler K. Merceron et al.

BIOFABRICATION (2015)

Add to Collection

Article Engineering, Biomedical

Fabrication of three-dimensional bioplotted hydrogel scaffolds for islets of Langerhans transplantation

G. Marchioli et al.

BIOFABRICATION (2015)

Add to Collection

Article Chemistry, Multidisciplinary

3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs

David B. Kolesky et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Engineering, Biomedical

3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration

Jason A. Inzana et al.

BIOMATERIALS (2014)

Add to Collection

Letter Dermatology

Dissociated Human Dermal Papilla Cells Induce Hair Follicle Neogenesis in Grafted Dermal-Epidermal Composites

Rajesh L. Thangapazham et al.

JOURNAL OF INVESTIGATIVE DERMATOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Gold Nanoparticle-Decellularized Matrix Hybrids for Cardiac Tissue Engineering

Michal Shevach et al.

NANO LETTERS (2014)

Add to Collection

Article Biotechnology & Applied Microbiology

Microfluidic organs-on-chips

Sangeeta N. Bhatia et al.

NATURE BIOTECHNOLOGY (2014)

Add to Collection

Article Cell & Tissue Engineering

Design and Fabrication of Human Skin by Three-Dimensional Bioprinting

Vivian Lee et al.

TISSUE ENGINEERING PART C-METHODS (2014)

Add to Collection

Article Engineering, Biomedical

Three-dimensional printing of Hela cells for cervical tumor model in vitro

Yu Zhao et al.

BIOFABRICATION (2014)

Add to Collection

Article Engineering, Biomedical

3D printing facilitated scaffold-free tissue unit fabrication

Yu Tan et al.

BIOFABRICATION (2014)

Add to Collection

Article Cell & Tissue Engineering

Cell Therapy for Myocardial Infarction

Yoo-Wook Kwon et al.

International Journal of Stem Cells (2014)

Add to Collection

Review Engineering, Biomedical

Natural and synthetic biodegradable polymers: different scaffolds for cell expansion and tissue formation

Annalia Asti et al.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

25th Anniversary Article: Engineering Hydrogels for Biofabrication

Jos Malda et al.

ADVANCED MATERIALS (2013)

Add to Collection

Letter Medicine, General & Internal

Bioresorbable Airway Splint Created with a Three-Dimensional Printer

David A. Zopf et al.

NEW ENGLAND JOURNAL OF MEDICINE (2013)

Add to Collection

Article Multidisciplinary Sciences

Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice

Stefanie Michael et al.

PLOS ONE (2013)

Add to Collection

Article Engineering, Biomedical

Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells

Roberto Gaetani et al.

BIOMATERIALS (2012)

Add to Collection

Article Engineering, Biomedical

Cancer cell migration within 3D layer-by-layer microfabricated photocrosslinked PEG scaffolds with tunable stiffness

Pranav Soman et al.

BIOMATERIALS (2012)

Add to Collection

Article Biotechnology & Applied Microbiology

Skin tissue generation by laser cell printing

Lothar Koch et al.

BIOTECHNOLOGY AND BIOENGINEERING (2012)

Add to Collection

Article Multidisciplinary Sciences

Preventing hypoxia-induced cell death in beta cells and islets via hydrolytically activated, oxygen-generating biomaterials

Eileen Pedraza et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)

Add to Collection

Article Cell Biology

Oxygen Gas-Filled Microparticles Provide Intravenous Oxygen Delivery

John N. Kheir et al.

SCIENCE TRANSLATIONAL MEDICINE (2012)

Add to Collection

Article Multidisciplinary Sciences

Fully functional hair follicle regeneration through the rearrangement of stem cells and their niches

Koh-ei Toyoshima et al.

NATURE COMMUNICATIONS (2012)

Add to Collection

Article Cell & Tissue Engineering

Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds

Aleksander Skardal et al.

STEM CELLS TRANSLATIONAL MEDICINE (2012)

Add to Collection

Article Engineering, Biomedical

Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration

Ralf Gaebel et al.

BIOMATERIALS (2011)

Add to Collection

Review Medicine, General & Internal

Bone regeneration: current concepts and future directions

Rozalia Dimitriou et al.

BMC MEDICINE (2011)

Add to Collection

Review Clinical Neurology

Oligodendrocytes: biology and pathology

Monika Bradl et al.

ACTA NEUROPATHOLOGICA (2010)

Add to Collection

Article Engineering, Biomedical

A neurospheroid network-stamping method for neural transplantation to the brain

Midori Kato-Negishi et al.

BIOMATERIALS (2010)

Add to Collection

Article Neurosciences

Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture

Yeong-Bae Lee et al.

EXPERIMENTAL NEUROLOGY (2010)

Add to Collection

Meeting Abstract Surgery

In situ bioprinting of the skin for burns

Kyle W. Binder et al.

JOURNAL OF THE AMERICAN COLLEGE OF SURGEONS (2010)

Add to Collection

Article Cell & Tissue Engineering

Development of a Decellularized Lung Bioreactor System for Bioengineering the Lung: The Matrix Reloaded

Andrew P. Price et al.

TISSUE ENGINEERING PART A (2010)

Add to Collection

Article Engineering, Biomedical

Additive manufacturing for in situ repair of osteochondral defects

Daniel L. Cohen et al.

BIOFABRICATION (2010)

Add to Collection

Article Neurosciences

Three-dimensional bioprinting of rat embryonic neural cells

Wonhye Lee et al.

NEUROREPORT (2009)

Add to Collection

Article Multidisciplinary Sciences

Constitutive modelling of passive myocardium: a structurally based framework for material characterization

Gerhard A. Holzapfel et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2009)

Add to Collection

Article

Neurological Disorders: Public Health Challenges

ARCHIVES OF NEUROLOGY (2008)

Add to Collection

Article Chemistry, Physical

Porous scaffold design for tissue engineering

SJ Hollister

NATURE MATERIALS (2005)

Add to Collection

Review Neurosciences

Human immunodeficiency virus-associated dementia: An evolving disease

JC McArthur et al.

JOURNAL OF NEUROVIROLOGY (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.