Related references
Note: Only part of the references are listed.
Article
Multidisciplinary Sciences
Renxing Lin et al.
Summary: Researchers have developed ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling high-efficiency all-perovskite tandem solar cells. By enhancing the adsorption of the passivator using a stronger surface-passivator interaction, the carrier diffusion length within Pb-Sn perovskites is doubled, resulting in an efficiency of over 22%. The certified efficiency of 26.4% achieved in the all-perovskite tandem solar cells exceeds that of the best-performing single-junction perovskite solar cells.
Article
Multidisciplinary Sciences
Minjin Kim et al.
Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.
Article
Physics, Applied
Zihao Chu et al.
Summary: This study reports a flexible large-area film transfer method to extend the cavity and demonstrates a pure green laser with low threshold, high quality factor, and high linear polarization degree. This is a significant step towards low-cost practical perovskite lasers.
APPLIED PHYSICS LETTERS
(2022)
Article
Multidisciplinary Sciences
K. O. Brinkmann et al.
Summary: Multijunction solar cells can surpass the efficiency limits of single-junction devices. Metal halide perovskite solar cells, in combination with silicon and copper indium gallium selenide (CIGS) or as all-perovskite tandems, have shown promising results. Narrow-gap non-fullerene acceptors have also significantly improved the efficiencies of organic solar cells. In this study, perovskite-organic tandem cells with high efficiency and voltage are demonstrated, utilizing optimized charge extraction layers and an ultrathin metal-like indium oxide layer for interconnection. This milestone work outperforms the best perovskite single junctions and is comparable to perovskite-CIGS and all-perovskite multijunctions.
Article
Multidisciplinary Sciences
Shaun Tan et al.
Summary: Optoelectronic devices rely on heterointerfaces between different semiconducting materials, and the energy-level alignment between them plays a crucial role in device performance. Surface treatments for perovskite solar cells can impact the energetics of the heterointerface, potentially affecting device stability. Balancing the pros and cons of surface treatments is essential for improving PSC stability.
Article
Nanoscience & Nanotechnology
Hengyue Li et al.
Summary: Perovskite solar cells have attracted significant attention as a promising alternative for clean energy generation. This study demonstrates the successful fabrication of high efficiency perovskite solar cells using slot-die coating technique under ambient condition.
NANO-MICRO LETTERS
(2022)
Article
Chemistry, Physical
Yuanji Gao et al.
Summary: In this article, recent progress in flexible perovskite solar cells (f-PSCs) is reviewed, including flexible substrates, flexible transparent electrodes, performance optimization, large-scale fabrication techniques, and flexibility enhancement strategies. The potential applications and future development prospects of f-PSCs are also discussed.
ACS ENERGY LETTERS
(2022)
Article
Multidisciplinary Sciences
Jun Peng et al.
Summary: This research introduces a nanopatterned electron transport layer that overcomes the trade-off between passivation quality and series resistance in traditional polymer passivation layers. Combining the nanopatterned electron transport layer with a dopant-free hole transport layer improves the efficiency and stability of perovskite solar cells.
Review
Chemistry, Multidisciplinary
Lei Lei et al.
Summary: Metal halide perovskites are gaining attention in optoelectronic applications due to their properties such as large absorption coefficient, low defect density, and high charge carrier mobility. While progress has been made in perovskite-based lasers, the development is still in its early stages and electrically pumped lasers have not been realized yet. Understanding the fundamental photophysical characteristics of perovskite gain materials is crucial to accelerating their development in laser applications.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Multidisciplinary Sciences
Hanul Min et al.
Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.
Article
Multidisciplinary Sciences
Yasser Hassan et al.
Summary: By utilizing multidentate ligands to treat mixed-halide perovskite nanocrystals, efficient and color-stable red electroluminescence with a wavelength centered at 620 nanometers and an external quantum efficiency of 20.3% has been achieved. The key function of the ligand treatment is to 'clean' the nanocrystal surface by removing lead atoms, which suppresses the formation of iodine Frenkel defects and halide segregation. This work demonstrates the sensitivity of metal halide perovskites to surface properties and provides a pathway to control surface defect formation and migration, crucial for achieving bandgap stability for light emission and potentially impacting other optoelectronic applications.
Review
Chemistry, Multidisciplinary
Yongguang Tu et al.
Summary: Metal halide perovskites have versatile optoelectronic properties that make them promising candidates for next-generation space photovoltaic technology, despite being in the early stages of research compared to other practical space photovoltaics. The review highlights recent progress in perovskite solar cells for space applications, focusing on performance evolution and mechanism exploration under extreme space environments.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Physical
Ayman Maqsood et al.
Summary: Recent research has shown that surface passivation with the organic halide PEACl can effectively reduce trap state density in perovskite solar cells, leading to improved performance. This efficient PEACl treatment decreases halide deficiency on the perovskite surface, resulting in fewer surface defects and nonradiative recombination. The resulting perovskite solar cell exhibits a higher open-circuit voltage (1.15 V), equivalent to 92% of the Shockley-Queisser limit (1.25 V), and a higher fill factor compared to standard perovskite cells.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Multidisciplinary Sciences
Tongle Bu et al.
Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.
Article
Multidisciplinary Sciences
Shangshang Chen et al.
Summary: The study found that DMSO liquid additive trapped in perovskite-substrate interfaces during film formation led to voids, accelerating film degradation. Partial replacement of DMSO with solid-state carbohydrazide reduced interfacial voids and increased stability. Blade-coated p-i-n structure PSCs achieved a maximum PCE of 23.6% without efficiency loss after stability tests, demonstrating improved efficiency and stability with the new approach.
Article
Chemistry, Multidisciplinary
Caoyu Long et al.
Summary: This study introduces a novel material to enhance the performance of flexible perovskite solar cells, forming a 2D perovskite to reduce energy loss and improve photovoltaic performance. Furthermore, by acting as a protective layer, the long-term stability of the cells is significantly enhanced.
Article
Optics
Chenjing Quan et al.
Summary: The study demonstrates that the nonlinear optical properties of CsPbCl(x)Br(3-)x NCs glass can be adjusted by treatment temperature and halide anion ratio, with high temperature treatment resulting in better crystallinity and stronger nonlinear absorption performance. Furthermore, the research highlights the influence of halide anions, particularly Br, on the symmetry of the perovskite structure, leading to the redistribution of delocalized electrons and larger coefficients for 2PA and 3PA in CsPbCl1Br2 NCs glass compared to CsPbCl2Br1 and CsPbCl1.5Br1.5 NCs glasses.
PHOTONICS RESEARCH
(2021)
Article
Chemistry, Physical
Xiaoyu Yang et al.
Summary: The study focuses on optimizing polycrystalline perovskite surfaces by using multiple chemical bonds to eliminate various defects, resulting in substantial increases in photovoltaic efficiencies and long-term stability.
ACS ENERGY LETTERS
(2021)
Review
Chemistry, Physical
Yingzhen Hu et al.
Summary: The advance of lightweight and flexible ultrathin perovskite solar cells is promoting a new generation of soft electronics and machines requiring high power-per-weight ratio. The review highlights the recent progress, practical applications, fabrication technologies, and challenges of ultrathin and lightweight F-PSCs, aiming to promote their extensive applications and commercialization processes.
ACS ENERGY LETTERS
(2021)
Article
Multidisciplinary Sciences
Zhenyi Ni et al.
Article
Metallurgy & Metallurgical Engineering
Jian-hui Chang et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY
(2020)
Article
Chemistry, Physical
Keqing Huang et al.
ACS APPLIED ENERGY MATERIALS
(2020)
Article
Nanoscience & Nanotechnology
Yiliu Wang et al.
NATURE NANOTECHNOLOGY
(2020)
Review
Chemistry, Multidisciplinary
Nengxu Li et al.
CHEMICAL SOCIETY REVIEWS
(2020)
Article
Energy & Fuels
Chendi Gong et al.
Article
Materials Science, Multidisciplinary
Hengyue Li et al.
FLEXIBLE AND PRINTED ELECTRONICS
(2020)
Review
Chemistry, Multidisciplinary
Ajay Kumar Jena et al.
Article
Optics
Qi Jiang et al.
Article
Multidisciplinary Sciences
Sai Bai et al.
Article
Chemistry, Physical
Keqing Huang et al.
ADVANCED ENERGY MATERIALS
(2019)
Article
Multidisciplinary Sciences
Byung-wook Park et al.
NATURE COMMUNICATIONS
(2018)
Article
Energy & Fuels
Matthew O. Reese et al.
Article
Chemistry, Multidisciplinary
Qi Jiang et al.
ADVANCED MATERIALS
(2017)
