Alloy-Type Anodes for High-Performance Rechargeable Batteries

Article Chemistry, Multidisciplinary

Organophosphorus Hybrid Solid Electrolyte Interphase Layer Based on LixPO4 Enables Uniform Lithium Deposition for High-Performance Lithium Metal Batteries

Qian Wang et al.

Summary: A surface chelation strategy using phytic acid is proposed to create an organophosphorus hybrid flexible solid electrolyte interphase (SEI) layer for lithium metal batteries, improving cycling life and battery performance significantly.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Dual-Design of Nanoporous to Compact Interface via Atomic/Molecular Layer Deposition Enabling a Long-Life Silicon Anode

Jia-Bin Fang et al.

Summary: By utilizing a dual-film design consisting of flexible porous zincone and rigid compact TiO2, researchers were able to enhance the lithiation/delithiation process of silicon materials, achieving high electrochemical performance and cycling stability. The structure of the dual-film can alleviate internal stress of the silicon materials, provide sufficient mechanical strength and protection to the silicon particles, resulting in improved stability and capacity during cycling. The study demonstrated that the Si@zincone/TiO2 electrode exhibits excellent electrochemical performance and a low capacity-fading rate.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Harnessing Plasma-Assisted Doping Engineering to Stabilize Metallic Phase MoSe2 for Fast and Durable Sodium-Ion Storage

Hanna He et al.

Summary: Metallic-phase selenide molybdenum has gained attention for sodium storage due to its conductivity and diffusion structure. However, its instability poses challenges for phase control. In this study, plasma-assisted P-doping-triggered phase-transition engineering was used to synthesize stabilized P-doped molybdenum selenide with high conversion efficiency and phase stability.

ADVANCED MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Design Strategies for High-Energy-Density Aqueous Zinc Batteries

Pengchao Ruan et al.

Summary: This review comprehensively summarizes the rational design strategies of high-energy-density zinc batteries, critically analyzes the positive effects and potential issues of these strategies, and outlines the challenges and perspectives for further development.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Electrochemistry

Reasonable design of a V2O5-x/TiO2 active interface structure with high polysulfide adsorption energy for advanced lithium-sulfur batteries

Xiaoshi Lang et al.

Summary: In this study, a V2O5-x/TiO2 active interface structure with high polysulfide adsorption energy was designed for lithium-sulfur batteries, which exhibited improved electrochemical performances. The interface showed low electrochemical charge transfer resistance and high lithium-ion transfer efficiency. The sulfur-wrapped cathode material displayed high specific capacities and good cycling stability.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Unlocking the Reversible Selenium Electrode for Non-Aqueous and Aqueous Calcium-Ion Batteries

Rui Zhou et al.

Summary: Calcium-ion batteries have promising potential as multivalent ion battery systems, and selenium has been explored as a reliable electrode material. Selenium demonstrates high energy density and long-term cyclic stability, making it suitable for both non-aqueous and aqueous electrolytes.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Pre-Lithiation of Silicon Anodes by Thermal Evaporation of Lithium for Boosting the Energy Density of Lithium Ion Cells

Egy Adhitama et al.

Summary: Silicon (Si) is a promising anode candidate for lithium ion batteries, but its practical usage is hindered by parasitic side reactions. Pre-lithiation is considered an attractive technique to compensate for active lithium losses, but controlling the lithium amount precisely and achieving a homogeneous distribution remains challenging.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Vertically Heterostructured Solid Electrolytes for Lithium Metal Batteries

Fei He et al.

Summary: This review summarizes the specific features of vertically heterostructured solid-state electrolytes (HSE) based on the current knowledge of solid-state electrolyte failure modes. The recent progress in HSE design using organic polymer electrolytes and inorganic electrolytes is comprehensively reviewed. The advantages and drawbacks of the design strategies are discussed, and new perspectives about HSE are proposed.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Fast Charging Anode Materials for Lithium-Ion Batteries: Current Status and Perspectives

Shengqiang Li et al.

Summary: With the rapid development of the electric vehicle market, there is a high demand for fast charging battery technology. However, traditional graphite anode materials have limitations in their ability to charge quickly. In this review, the current status of fast charging anode materials is summarized, including the challenges faced, the structures and lithium storage mechanisms of different materials, and the recent progress in improving rate performance through various approaches.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Ionogel-Based Membranes for Safe Lithium/Sodium Batteries

Sen Wang et al.

Summary: This review discusses the recent advances in ionogel electrolytes for safe lithium/sodium batteries, including their structure, properties, and applications. Ionogel electrolytes, composed of ionic liquids and solid matrices, offer advantages such as nonvolatility and nonflammability.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

An excellent adsorptive TiO2@yV2O5 (y=0.025-0.045) bifunctional composite endowing high sulfur loading as cathode material for lithium-sulfur batteries

Tan Wang et al.

Summary: In this study, TiO2@yV2O5 (y = 0.025-0.045) bifunctional composites were designed to simultaneously store sulfur and lithium polysulfides (LiPSs) and improve the conductivity of the cathode material. The electrode showed high capacity retention and low polarization, indicating its potential for application in lithium-sulfur batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: A phase field study

Yuhong Zhao et al.

Summary: The influence of interfacial energy anisotropy on dendrite morphology was investigated in Al-Zn alloys using the phase-field method. Different types of dendrite morphology were observed, and the occurrence of solute segregation holes and liquid grooves in dendrites was found to be influenced by the anisotropic interfacial energy. Supersaturation was found to be strongly correlated with the formation of liquid holes and liquid grooves as well as the degree of solute segregation. The relationship between interfacial energy anisotropy, Zn concentration, elastic anisotropy, and dendrite orientation deserves attention.

MATERIALS & DESIGN (2022)

Add to Collection

Review Multidisciplinary Sciences

From room temperature to harsh temperature applications: Fundamentals and perspectives on electrolytes in zinc metal batteries

Sailin Liu et al.

Summary: This review examines the failure mechanism of rechargeable zinc metal batteries under temperature influence, presents current electrolyte strategies for improving battery performance in harsh temperatures, and offers perspectives on their industrial application.

SCIENCE ADVANCES (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress on the Alloy-Based Anode for Sodium-Ion Batteries and Potassium-Ion Batteries

Keming Song et al.

Summary: High-energy batteries with low cost are urgently needed for large-scale energy storage systems. Alloy-based anodes for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) show great potential, but further improvements are necessary for long lifetime and high energy density. This study summarizes the latest progress in alloy-based anodes for SIBs and PIBs, discussing material designs and future research prospects.

SMALL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemical Mg2+ Displacement Driven Reversible Copper Extrusion/Intrusion Reactions for High-Rate Rechargeable Magnesium Batteries

Xiaolan Xue et al.

Summary: This study demonstrates the potential of using copper selenide as a durable cathode material for rechargeable magnesium batteries, improving the rate performance, structural stability, and cycle life through an ionic displacement mechanism. The reversible exchange of copper ions by magnesium ions and the in situ generation of metal copper during discharging greatly facilitate electron transport and contribute to the overall enhanced battery performance. Comprehensive characterizations confirm the reversible copper ion extrusion/reinjection processes, suggesting promising electrode materials for advanced multivalent-ion secondary batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fatigue-Resistant Interfacial Layer for Safe Lithium Metal Batteries

Rui-Min Gao et al.

Summary: By designing a polymer with a slide-ring structure, the cycling performance and safety of lithium anodes can be significantly improved, leading to the suppression of lithium dendrite formation and demonstrating good self-healing properties.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Nucleation and Growth Mechanism of Anion-Derived Solid Electrolyte Interphase in Rechargeable Batteries

Chong Yan et al.

Summary: Research on solid electrolyte interphase (SEI) formation should focus on its nucleation and growth mechanism, especially the establishment of isothermal electrochemical crystallization theory to explain the process.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

The Crucial Role of Local Excess Charges in Dendrite Growth on Lithium Electrodes

Elizabeth Santos et al.

Summary: In lithium metal batteries, excess charge accumulates on small protrusions due to the negatively charged electrode, creating a strong electric field that attracts Li+ ions and induces dendrite growth. This excess charge, even on small tips, can contribute to dendrite formation along with locally reduced surface tension.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Achieving High-Performance Metal Phosphide Anode for Potassium Ion Batteries via Concentrated Electrolyte Chemistry

Fuhua Yang et al.

Summary: Concentrated electrolyte is used to improve the cycling stability of potassium metal and potassium-ion batteries, mitigating the capacity degradation of metal phosphides and providing a feasible strategy for building high-energy-density potassium-ion batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Electrochemistry

Reducing Diffusion-Induced Stress of Bilayer Electrode System by Introducing Pre-Strain in Lithium-Ion Battery

Wenqian Hao et al.

Summary: A chemo-mechanical coupled theoretical model of a bilayer electrode system was established to alleviate diffusion-induced stress, and the effects of pre-strain on stress distribution and ion diffusion behavior in lithium-ion batteries were discussed. The results provide valuable insights for reducing stress and improving performance in LIBs.

JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Amorphous Carbon Nano-Interface-Modified Aluminum Anodes for High-Performance Dual-Ion Batteries

Songqiao Peng et al.

Summary: Researchers have developed a new structure of dual-ion batteries, utilizing an amorphous carbon nanointerface coated on an aluminum anode to prevent excessive growth of the solid electrolyte interphase layer and maintain structural stability. Pairing this structure with a graphite cathode has resulted in DIBs with significantly improved performances compared to traditional batteries.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrathin Layered Double Hydroxide Nanosheets Enabling Composite Polymer Electrolyte for All-Solid-State Lithium Batteries at Room Temperature

Shuixin Xia et al.

Summary: A novel solid electrolyte with enhanced lithium ion conductivity and stability at room temperature has been designed, providing a new solution for constructing high-safety and high-energy-density energy storage devices.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

In-situ Nano-Crystallization and Solvation Modulation to Promote Highly Stable Anode Involving Alloy/De-alloy for Potassium Ion Batteries

Lu Wang et al.

Summary: The proposal of 2D bismuth subcarbonate nanosheets for advanced anode materials in potassium ion batteries shows improved capacity and cycling performance, with the ability to withstand numerous cycles at a low decay rate.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Architectural Engineering Achieves High-Performance Alloying Anodes for Lithium and Sodium Ion Batteries

Songtao Guo et al.

Summary: Efforts have been dedicated to developing high-performance electrochemical energy storage devices, especially in the development of high-energy-density LIBs and SIBs. However, challenges such as severe pulverization and rapid capacity decay still exist in anode materials based on alloying storage mechanisms, despite advances in materials and electrode structures.

SMALL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Stress Dissipation in Well-Aligned Pyramidal SbSn Alloy Nanoarrays for Robust Sodium Storage

Xinyan Li et al.

Summary: Alloy-type anode materials with well-aligned antimony tin (SbSn) alloy nanoarrays electrodeposited on copper (Cu) substrates were developed for sodium-ion batteries, improving the connection strength between the active alloy and the substrate. Density functional theory calculations showed energetically favorable sodium diffusion in the alloy, while the unique triangular pyramid-like nanostructure promoted efficient ion diffusion and stress distribution. These optimized composition and geometry led to enhanced high-rate performance and prolonged cycle life of the SbSn alloy nanoarrays.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Energy Storage Mechanism, Challenge and Design Strategies of Metal Sulfides for Rechargeable Sodium/Potassium-Ion Batteries

Qingguang Pan et al.

Summary: This review discusses the energy storage mechanism, challenges, and design strategies of metal sulfides (MSx) in rechargeable sodium/potassium-ion batteries, addressing the performance limitations faced by MSx. Various design strategies for improving the comprehensive electrochemical performance of SIBs/PIBs using MSx are highlighted, with prospects for overcoming imminent challenges and predicting future directions in the field.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Chemical Lithiation Transforms Diamond-Like Carbon into an Ultrastrong Ion Conductor for Dendrite-Free Lithium-Metal Anodes

Zhongzhong Li et al.

Summary: This study presents a method of coating a PP separator with a layer of ultrastrong DLC to suppress Li-dendrite growth, which undergoes in situ chemical lithiation when assembled with the lithium-metal anode, resulting in stable cycling and dendrite-free lithium deposition.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Regulation of SEI Formation by Anion Receptors to Achieve Ultra-Stable Lithium-Metal Batteries

Kangsheng Huang et al.

Summary: In this study, an anion-receptor-mediated carbonate electrolyte was reported to improve the cyclability of Li-metal anodes in rechargeable batteries with high average Coulombic efficiency and enhanced ion dynamics. XPS analysis distinguished differences in SEI components between the developed and blank electrolyte, showcasing molecular insights into the Li-metal/electrolyte interface. A 2.5 Ah prototype pouch cell was prepared with a high energy density and 90.90% capacity retention over 50 cycles.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Advanced Electrolyte Design for High-Energy-Density Li-Metal Batteries under Practical Conditions

Shouyi Yuan et al.

Summary: The review summarizes the development of new electrolyte systems for practical Li-metal batteries, revisits the design criteria of advanced electrolytes for practical Li-metal batteries, and provides perspectives on the future development of electrolytes for practical Li-metal batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Mechanics

Fracture predictions based on a coupled chemo-mechanical model with strain gradient plasticity theory for film electrodes of Li-ion batteries

Yaoxing Chen et al.

Summary: A new elastoplastic model was developed to describe diffusion-induced deformation in high-capacity electrodes in Li-ion batteries. Analysis of plastic behavior and hardening mechanisms of electrode materials was conducted by combining various theories and simulations. Finally, interface damage and debonding in active film materials were characterized.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Strategies towards Low-Cost Dual-Ion Batteries with High Performance

Xiaolong Zhou et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Voltage Aqueous Na-Ion Battery Enabled by Inert-Cation-Assisted Water-in-Salt Electrolyte

Liwei Jiang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Bimetallic Sulfide Sb2S3@FeS2 Hollow Nanorods as High-Performance Anode Materials for Sodium-Ion Batteries

Liang Cao et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

3D Chemical Cross-Linking Structure of Black Phosphorus@CNTs Hybrid as a Promising Anode Material for Lithium Ion Batteries

Yupu Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Copper Nitride Nanowires Printed Li with Stable Cycling for Li Metal Batteries in Carbonate Electrolytes

Dongsoo Lee et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible Interface Design for Stress Regulation of a Silicon Anode toward Highly Stable Dual-Ion Batteries

Chunlei Jiang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Electrochemistry

Understanding the effect of p-, n-type dopants and vinyl carbonate electrolyte additive on electrochemical performance of Si thin film anodes for lithium-ion battery

Aliya Mukanova et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Energy & Fuels

SnO2@C@Fe3O4 Sandwich-like Hollow Nanospheres for High-Performance Lithium-Ion Battery Anodes

Wenbin Guo et al.

ENERGY & FUELS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Si and Ge-Based Anode Materials for Li-, Na-, and K-Ion Batteries: A Perspective from Structure to Electrochemical Mechanism

Laura C. Loaiza et al.

SMALL (2020)

Add to Collection

Article Multidisciplinary Sciences

Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode

Mintao Wan et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

Rooting binder-free tin nanoarrays into copper substrate via tin-copper alloying for robust energy storage

Jiangfeng Ni et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Design strategies for nonaqueous multivalent-ion and monovalent-ion battery anodes

Matthew Li et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Interface-Amorphized Ti3C2@Si/SiOx@TiO2 Anodes with Sandwiched Structures and Stable Lithium Storage

Min Jiang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Power Lithium Metal Batteries Enabled by High-Concentration Acetonitrile-Based Electrolytes with Vinylene Carbonate Additive

Peng Zhe et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Construction of An Ultra-Stable Conductive Composite Interface for High-Voltage All-Solid-State Lithium Metal Batteries

Kai Shi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Unveiling the Advances of Nanostructure Design for Alloy-Type Potassium-Ion Battery Anodes via In Situ TEM

Huawen Huang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Multidisciplinary Sciences

Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes

Haiping Jia et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

Lamella-nanostructured eutectic zinc-aluminum alloys as reversible and dendrite-free anodes for aqueous rechargeable batteries

Sheng-Bo Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lithiophilic Zn Sites in Porous CuZn Alloy Induced Uniform Li Nucleation and Dendrite-free Li Metal Deposition

Shang-Sen Chi et al.

NANO LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Revealing the Role of Liquid Metals at the Anode-Electrolyte Interface for All Solid-State Lithium-Ion Batteries

Fangjie Mo et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Applied

Simple synthesis of sandwich-like SnSe2/rGO as high initial coulombic efficiency and high stability anode for sodium-ion batteries

Tingting Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Simultaneously pre-alloying and artificial solid electrolyte interface towards highly stable aluminum anode for high-performance Li hybrid capacitor

Xuewu Ou et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Lattice softening enables highly reversible sodium storage in anti-pulverization Bi-Sb alloy/carbon nanofibers

Songtao Guo et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Dendrite-Free Sn Anode with High Reversibility for Aqueous Batteries Enabled by Water-in-Salt Electrolyte

Jiaxing Ouyang et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Transition metal dichalcogenides in alliance with Ag ameliorate the interfacial connection between Li anode and garnet solid electrolyte

Zhen Sun et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium Nitrate Regulated Sulfone Electrolytes for Lithium Metal Batteries

Jiale Fu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

A dendrite-eating separator for high-areal-capacity lithium-metal batteries

Xiao Chen et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-based artificial SEI layers for aqueous lithium-ion battery anodes

Usha Subramanya et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Physical

Stable artificial solid electrolyte interphase films for lithium metal anode via metal-organic frameworks cemented by polyvinyl alcohol

Lishuang Fan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Concept and electrochemical mechanism of an Al metal anode - organic cathode battery

Jan Bitenc et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Design Principles of the Anode-Electrolyte Interface for All Solid-State Lithium Metal Batteries

Zeyu Shen et al.

SMALL METHODS (2020)

Add to Collection

Article Chemistry, Physical

Platinum nano-interlayer enhanced interface for stable all-solid-state batteries observed via cryo-transmission electron microscopy

Ouwei Sheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Solubility-Dependent Protective Effects of Binary Alloys for Lithium Anode

Yan Xu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Recent progress on metallic Sn- and Sb-based anodes for sodium-ion batteries

Wen Tao Jing et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Physical

A review of phosphorus and phosphides as anode materials for advanced sodium-ion batteries

Guoliang Chang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Electrochemistry

Review-In Situ Polymerization for Integration and Interfacial Protection Towards Solid State Lithium Batteries

Tingting Liu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

In situ formation of a LiF and Li-Al alloy anode protected layer on a Li metal anode with enhanced cycle life

Lili Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

From sand to fast and stable silicon anode: Synthesis of hollow Si@void@C yolk-shell microspheres by aluminothermic reduction for lithium storage

Zhengwei Zhou et al.

CHINESE CHEMICAL LETTERS (2019)

Add to Collection

Article Electrochemistry

Novel divalent organo-lithium salts with high electrochemical and thermal stability for aqueous rechargeable Li-Ion batteries

Faiz Ahmed et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Toward a Stable Sodium Metal Anode in Carbonate Electrolyte: A Compact, Inorganic Alloy Interface

Xueying Zheng et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

First-principles molecular dynamics study on ultrafast potassium ion transport in silicon anode

Sangjin Lee et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Review Chemistry, Physical

Pure silicon thin-film anodes for lithium-ion batteries: A review

Mohammed Salah et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Reverse Dual-Ion Battery via a ZnCl2 Water-in-Salt Electrolyte

Xianyong Wu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Self-supporting, eutectic-like, nanoporous biphase bismuth-tin film for high-performance magnesium storage

Meijia Song et al.

NANO RESEARCH (2019)

Add to Collection

Review Chemistry, Physical

Strategies for improving the storage performance of silicon-based anodes in lithium-ion batteries

Wei Tao et al.

NANO RESEARCH (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Flexible Zn-Ion Batteries: Recent Progresses and Challenges

Peng Yu et al.

SMALL (2019)

Add to Collection

Article Chemistry, Physical

A Calcium-Ion Hybrid Energy Storage Device with High Capacity and Long Cycling Life under Room Temperature

Nanzhong Wu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Review Energy & Fuels

Advances and issues in developing salt-concentrated battery electrolytes

Yuki Yamada et al.

NATURE ENERGY (2019)

Add to Collection

Article Electrochemistry

Alloyed Cu/Si core-shell nanoflowers on the three-dimensional graphene foam as an anode for lithium-ion batteries

Chenguang Liu et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Optimized ALD-derived MgO coating layers enhancing silicon anode performance for lithium ion batteries

Xia Tai et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Add to Collection

Article Chemistry, Physical

Morphology-controlled synthesis of hollow Si/C composites based on KI-assisted magnesiothermic reduction for high performance Li-ion batteries

Pei Han et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Antimony- and Bismuth-Based Chalcogenides for Sodium-Ion Batteries

Baolin Xu et al.

CHEMISTRY-AN ASIAN JOURNAL (2019)

Add to Collection

Article Electrochemistry

Nano-Si/C microsphere with hollow double spherical interlayer and submicron porous structure to enhance performance for lithium-ion battery anode

Hedong Chen et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

High-Performance Silicon Anodes Enabled By Nonflammable Localized High-Concentration Electrolytes

Haiping Jia et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of binders and additives to tailor the electrochemical performance of Sb2Te3-TiC alloy anodes for high-performance sodium-ion batteries

Vijay Mohan Nagulapati et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Add to Collection

Article Energy & Fuels

Monolithic solid-electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization

Xia Cao et al.

NATURE ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Vinyl Ethylene Carbonate as an Effective SEI-Forming Additive in Carbonate-Based Electrolyte for Lithium-Metal Anodes

Yang Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Flexible Artificial Solid Electrolyte Interphase Formed by 1,3-Dioxolane Oxidation and Polymerization for Metallic Lithium Anodes

Cheng Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

High-Rate and Long Cycle-Life Alloy-Type Magnesium-Ion Battery Anode Enabled Through (De)magnesiation-Induced Near-Room-Temperature Solid-Liquid Phase Transformation

Lin Wang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Diffusion Limitation of Lithium Metal and Li-Mg Alloy Anodes on LLZO Type Solid Electrolytes as a Function of Temperature and Pressure

Thorben Krauskopf et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel Organic Polyurea Thin Film for Ultralong-Life Lithium-Metal Anodes via Molecular-Layer Deposition

Yipeng Sun et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

An Electron/Ion Dual-Conductive Alloy Framework for High-Rate and High-Capacity Solid-State Lithium-Metal Batteries

Chunpeng Yang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Guiding Uniform Li Plating/Stripping through Lithium-Aluminum Alloying Medium for Long-Life Li Metal Batteries

Huan Ye et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Physical

Unexpected Behavior of the InSb Alloy in Mg-Ion Batteries: Unlocking the Reversibility of Sb

Lucie Blondeau et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Physical

Discovery of Calcium-Metal Alloy Anodes for Reversible Ca-Ion Batteries

Zhenpeng Yao et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Energy & Fuels

Biomass-Derived Poly(Furfuryl Alcohol)-Protected Aluminum Anode for Lithium-Ion Batteries

Han Yeu Ling et al.

ENERGY TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Alloying Strategy for Exceptional Potassium Ion Batteries

Jue Wang et al.

ACS NANO (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Peering into Alloy Anodes for Sodium-Ion Batteries: Current Trends, Challenges, and Opportunities

Huiteng Tan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium-Magnesium Alloy as a Stable Anode for Lithium-Sulfur Battery

Ling-Long Kong et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Uniform Distribution of Alloying/Dealloying Stress for High Structural Stability of an Al Anode in High-Areal-Density Lithium-Ion Batteries

Miao Zhang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Roll-to-roll prelithiation of Sn foil anode suppresses gassing and enables stable full-cell cycling of lithium ion batteries

Hui Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

An artificial solid interphase with polymers of intrinsic microporosity for highly stable Li metal anodes

Gi Hyeon Moon et al.

CHEMICAL COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A comparative study of pomegranate Sb@ C yolk- shell microspheres as Li and Na- ion battery anodes

Junhua Song et al.

NANOSCALE (2019)

Add to Collection

Article Chemistry, Physical

High-concentration ether-based electrolyte boosts the electrochemical performance of SnS2-reduced graphene oxide for K-ion batteries

Junpeng Xie et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

A fast and stable Li metal anode incorporating an Mo6S8 artificial interphase with super Li-ion conductivity

Ke Lu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Nanocrystal Conversion-Assisted Design of Sn-Fe Alloy with a Core-Shell Structure as High-Performance Anodes for Lithium-Ion Batteries

Fengxia Xin et al.

ACS OMEGA (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

BiSbS3@N-doped carbon core-shell nanorods as efficient anode materials for sodium-ion batteries

Siying Wen et al.

DALTON TRANSACTIONS (2019)

Add to Collection

Article Chemistry, Physical

Rational design of robust-flexible protective layer for safe lithium metal battery

Siyuan Li et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Fluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries

Tao Li et al.

JOULE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Alloy Anodes for Rechargeable Alkali-Metal Batteries: Progress and Challenge

He Liu et al.

ACS MATERIALS LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Localized high concentration electrolyte behavior near a lithium-metal anode surface

Yu Zheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Plating and stripping calcium in an organic electrolyte

Da Wang et al.

NATURE MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Core-Shell Aluminum@Carbon Nanospheres for Dual-Ion Batteries with Excellent Cycling Performance under High Rates

Xuefeng Tong et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes

Lin Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Artificial Soft-Rigid Protective Layer for Dendrite-Free Lithium Metal Anode

Rui Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High-Voltage Lithium-Metal Batteries Enabled by Localized High-Concentration Electrolytes

Shuru Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A highly concentrated phosphate-based electrolyte for high-safety rechargeable lithium batteries

Pengcheng Shi et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Towards K-Ion and Na-Ion Batteries as Beyond Li-Ion

Kei Kubota et al.

CHEMICAL RECORD (2018)

Add to Collection

Article Chemistry, Physical

In Situ Dealloying of Bulk Mg2Sn in Mg-Ion Half Cell as an Effective Route to Nanostructured Sn for High Performance Mg-Ion Battery Anodes

Hooman Yaghoobnejad Asl et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage

Meng Wang et al.

NATURE CHEMISTRY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

An artificial interphase enables reversible magnesium chemistry in carbonate electrolytes

Seoung-Bum Son et al.

NATURE CHEMISTRY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li-S batteries

Eunho Cha et al.

NATURE NANOTECHNOLOGY (2018)

Add to Collection

Review Nanoscience & Nanotechnology

A Review: Enhanced Anodes of Li/Na-Ion Batteries Based on Yolk-Shell Structured Nanomaterials

Cuo Wu et al.

NANO-MICRO LETTERS (2018)

Add to Collection

Article Chemistry, Physical

A bottom-up synthetic hierarchical buffer structure of copper silicon nanowire hybrids as ultra-stable and high-rate lithium-ion battery anodes

Hucheng Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

Formation of self-limited, stable and conductive interfaces between garnet electrolytes and lithium anodes for reversible lithium cycling in solid-state batteries

Minghui He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Review Nanoscience & Nanotechnology

A Review: Enhanced Anodes of Li/Na-Ion Batteries Based on Yolk-Shell Structured Nanomaterials

Cuo Wu et al.

NANO-MICRO LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Extremely Stable Sodium Metal Batteries Enabled by Localized High-Concentration Electrolytes

Jianming Zheng et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

An amorphous Si material with a sponge-like structure as an anode for Li-ion and Na-ion batteries

Ying Han et al.

NANOSCALE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A high performance lithium-ion-sulfur battery with a free-standing carbon matrix supported Li-rich alloy anode

Tao Zhang et al.

CHEMICAL SCIENCE (2018)

Add to Collection

Editorial Material Multidisciplinary Sciences

Aligning academia and industry for unified battery performance metrics

Zhan Lin et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

An ion redistributor for dendrite-free lithium metal anodes

Chen-Zi Zhao et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A ZnCl2 water-in-salt electrolyte for a reversible Zn metal anode

Chong Zhang et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

A Li-ion sulfur full cell with ambient resistant Al-Li alloy anode

Ju Sun et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Potassium-Ion Battery Anode Materials Operating through the Alloying-Dealloying Reaction Mechanism

Irin Sultana et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

The synergetic interaction between LiNO3 and lithium polysulfides for suppressing shuttle effect of lithium-sulfur batteries

Liang Zhang et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

An Ultrastrong Double-Layer Nanodiamond Interface for Stable Lithium Metal Anodes

Yayuan Liu et al.

JOULE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel and Generalized Lithium-Ion-Battery Configuration utilizing Al Foil as Both Anode and Current Collector for Enhanced Energy Density

Bifa Ji et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Ultrathin Surface Coating Enables the Stable Sodium Metal Anode

Wei Luo et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Self-healing SEI enables full-cell cycling of a silicon-majority anode with a coulombic efficiency exceeding 99.9%

Yang Jin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

A novel strategy to prepare Ge@C/rGO hybrids as high-rate anode materials for lithium ion batteries

Bangrun Wang et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium Metal Anodes with an Adaptive Solid-Liquid Interfacial Protective Layer

Kai Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Electrochemistry

Dilution of Highly Concentrated LiBF4/Propylene Carbonate Electrolyte Solution with Fluoroalkyl Ethers for 5-V LiNi0.5Mn1.5O4 Positive Electrodes

Takayuki Doi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Inorganic-Organic Coating via Molecular Layer Deposition Enables Long Life Sodium Metal Anode

Yang Zhao et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Low-Cost Metallic Anode Materials for High Performance Rechargeable Batteries

Meng Wang et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Integrated Configuration Design for Ultrafast Rechargeable Dual-Ion Battery

Chunlei Jiang et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Energy & Fuels

A facile surface chemistry route to a stabilized lithium metal anode

Xiao Liang et al.

NATURE ENERGY (2017)

Add to Collection

Article Energy & Fuels

Making Li-metal electrodes rechargeable by controlling the dendrite growth direction

Yadong Liu et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Copper-Nanoparticle-Induced Porous Si/Cu Composite Films as an Anode for Lithium Ion Batteries

Liang Lin et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Reducing Interfacial Resistance between Garnet-Structured Solid-State Electrolyte and Li-Metal Anode by a Germanium Layer

Wei Luo et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Bubble-Sheet-Like Interface Design with an Ultrastable Solid Electrolyte Layer for High-Performance Dual-Ion Batteries

Panpan Qin et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Xue-Qiang Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Electrochemistry

Enhanced electrochemical performance and decreased strain of graphite anode by Li2SiO3 and Li2CO3 co-modifying

Yao Xiao et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Chemistry, Physical

Towards a calcium-based rechargeable battery

A. Ponrouch et al.

NATURE MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Reversible Na-Ion Uptake in Si Nanoparticles

Yaolin Xu et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Toward Dendrite-Free Lithium Deposition via Structural and Interfacial Synergistic Effects of 3D Graphene@Ni Scaffold

Keyu Xie et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-Coated Porous Aluminum Foil Anode for High-Rate, Long-Term Cycling Stability, and High Energy Density Dual-Ion Batteries

Xuefeng Tong et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Advanced High-Voltage Aqueous Lithium-Ion Battery Enabled by Water-in-Bisalt Electrolyte

Liumin Suo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Electrochemistry

Experimental Study on Sodiation of Amorphous Silicon for Use as Sodium-Ion Battery Anode

Chek-Hai Lim et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Molecular Layer Deposition for Surface Modification of Lithium-Ion Battery Electrodes

Chunmei Ban et al.

ADVANCED MATERIALS INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition

Alexander C. Kozen et al.

ACS NANO (2015)

Add to Collection

Article Chemistry, Physical

Electrode-Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights

Magali Gauthier et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Multidisciplinary Sciences

Water-in-salt electrolyte enables high-voltage aqueous lithium-ion chemistries

Liumin Suo et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible and Binder-Free Electrodes of Sb/rGO and Na3V2(PO4)3/rGO Nanocomposites for Sodium-Ion Batteries

Wei Zhang et al.

SMALL (2015)

Add to Collection

Article Multidisciplinary Sciences

High-rate aluminium yolk-shell nanoparticle anode for Li-ion battery with long cycle life and ultrahigh capacity

Sa Li et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

Three-dimensionally interconnected nickel-antimony intermetallic hollow nanospheres as anode material for high-rate sodium-ion batteries

Jun Liu et al.

NANO ENERGY (2015)

Add to Collection

Article Chemistry, Physical

SnO2 coated carbon cloth with surface modification as Na-ion battery anode

Yihang Liu et al.

NANO ENERGY (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Electrolytes and Interphases in Li-Ion Batteries and Beyond

Kang Xu

CHEMICAL REVIEWS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Alloy Negative Electrodes for Li-Ion Batteries

M. N. Obrovac et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Research Development on Sodium-Ion Batteries

Naoaki Yabuuchi et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Article Chemistry, Physical

Atom-Level Understanding of the Sodiation Process in Silicon Anode Material

Sung Chul Jung et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Reversible Mg Insertion in Nanostructured Bi for Mg Ion Batteries

Yuyan Shao et al.

NANO LETTERS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes

Nian Liu et al.

NATURE NANOTECHNOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Dendrite-Free Nanostructured Anode: Entrapment of Lithium in a 3D Fibrous Matrix for Ultra-Stable Lithium-Sulfur Batteries

Xin-Bing Cheng et al.

SMALL (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Towards high energy density sodium ion batteries through electrolyte optimization

Alexandre Ponrouch et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Add to Collection

Review Materials Science, Coatings & Films

Fabrication of organic interfacial layers by molecular layer deposition: Present status and future opportunities

Han Zhou et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Atomic Layer Deposition of Nanostructured Materials for Energy and Environmental Applications

Catherine Marichy et al.

ADVANCED MATERIALS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

High capacity Na-storage and superior cyclability of nanocomposite Sb/C anode for Na-ion batteries

Jiangfeng Qian et al.

CHEMICAL COMMUNICATIONS (2012)

Add to Collection

Article Chemistry, Physical

Nanostructured Zn-based composite anodes for rechargeable Li-ion batteries

Yoon Hwa et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection

Article Electrochemistry

Performance Enhancing Electrolyte Additives for Lithium Ion Batteries with Silicon Anodes

Swapnil Dalavi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection

Article Electrochemistry

Galvanostatic electrodeposition of aluminium nano-rods for Li-ion three-dimensional micro-battery current collectors

Gabriel Oltean et al.

ELECTROCHIMICA ACTA (2011)

Add to Collection

Article Chemistry, Physical

Electrochemical synthesis of macroporous aluminium films and their behavior towards lithium deposition/stripping

L. H. S. Gasparotto et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Aluminum negative electrode in lithium ion batteries

Y Hamon et al.

JOURNAL OF POWER SOURCES (2001)

Add to Collection

Alloy-Type Anodes for High-Performance Rechargeable Batteries

Related references