Related references
Note: Only part of the references are listed.Simple Nonfused-Ring Electron Acceptors with Noncovalently Conformational Locks for Low-Cost and High-Performance Organic Solar Cells Enabled by End-Group Engineering
Congqi Li et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
High-Performance Organic Solar Cells from Non-Halogenated Solvents
Di Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction
Xiaopeng Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination
Kaien Chong et al.
ADVANCED MATERIALS (2022)
Organoboron molecules and polymers for organic solar cell applications
Junhui Miao et al.
CHEMICAL SOCIETY REVIEWS (2022)
Volatile Solid Additive-Assisted Sequential Deposition Enables 18.42% Efficiency in Organic Solar Cells
Jianqiang Qin et al.
ADVANCED SCIENCE (2022)
Tandem Organic Solar Cell with 20.2% Efficiency
Zhong Zheng et al.
JOULE (2022)
High fill factor organic solar cells with increased dielectric constant and molecular packing density
Xuning Zhang et al.
JOULE (2022)
Single-Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor
Rui Sun et al.
ADVANCED MATERIALS (2022)
Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology
Lei Zhu et al.
NATURE MATERIALS (2022)
Low-cost polymer acceptors with noncovalently fused-ring backbones for efficient all-polymer solar cells
Xiaobin Gu et al.
SCIENCE CHINA-CHEMISTRY (2022)
Pushing the Efficiency of High Open-Circuit Voltage Binary Organic Solar Cells by Vertical Morphology Tuning
Guilong Cai et al.
ADVANCED SCIENCE (2022)
Desired open-circuit voltage increase enables efficiencies approaching 19% in symmetric-asymmetric molecule ternary organic photovoltaics
Lingling Zhan et al.
JOULE (2022)
Hammer throw-liked hybrid cyclic and alkyl chains: A new side chain engineering for over 18 % efficiency organic solar cells
Xunchang Wang et al.
NANO ENERGY (2022)
Manipulating the D:A interfacial energetics and intermolecular packing for 19.2% efficiency organic photovoltaics
Chengliang He et al.
ENERGY & ENVIRONMENTAL SCIENCE (2022)
An A-D-A′-D-A type unfused nonfullerene acceptor for organic solar cells with approaching 14% efficiency
Xingzheng Liu et al.
SCIENCE CHINA-CHEMISTRY (2021)
High-Performance All-Polymer Solar Cells with a Pseudo-Bilayer Configuration Enabled by a Stepwise Optimization Strategy
Qiang Wu et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18%
Lingling Zhan et al.
ADVANCED MATERIALS (2021)
High-Performance Noncovalently Fused-Ring Electron Acceptors for Organic Solar Cells Enabled by Noncovalent Intramolecular Interactions and End-Group Engineering
Xin Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells
Chao Li et al.
NATURE ENERGY (2021)
Enhancing Photovoltaic Performances of Naphthalene-Based Unfused-Ring Electron Acceptors upon Regioisomerization
Xin Zhang et al.
SOLAR RRL (2021)
18.5% Efficiency Organic Solar Cells with a Hybrid Planar/Bulk Heterojunction
Ling Hong et al.
ADVANCED MATERIALS (2021)
Single-Junction Organic Photovoltaic Cell with 19% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2021)
Side-Chain Engineering for Enhancing the Molecular Rigidity and Photovoltaic Performance of Noncovalently Fused-Ring Electron Acceptors
Xin Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)
Exploring the Charge Dynamics and Energy Loss in Ternary Organic Solar Cells with a Fill Factor Exceeding 80%
Yihan Zeng et al.
ADVANCED ENERGY MATERIALS (2021)
Manipulating the solubility properties of polymer donors for high-performance layer-by-layer processed organic solar cells
Haijun Ning et al.
ENERGY & ENVIRONMENTAL SCIENCE (2021)
A universal method for constructing high efficiency organic solar cells with stacked structures
Yanan Wei et al.
ENERGY & ENVIRONMENTAL SCIENCE (2021)
Graphdiyne Derivative as Multifunctional Solid Additive in Binary Organic Solar Cells with 17.3% Efficiency and High Reproductivity
Le Liu et al.
ADVANCED MATERIALS (2020)
High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder
Sha Liu et al.
NATURE PHOTONICS (2020)
Simultaneous enhanced efficiency and thermal stability in organic solar cells from a polymer acceptor additive
Wenyan Yang et al.
NATURE COMMUNICATIONS (2020)
18% Efficiency organic solar cells
Qishi Liu et al.
SCIENCE BULLETIN (2020)
Optimized active layer morphology toward efficient and polymer batch insensitive organic solar cells
Kangkang Weng et al.
NATURE COMMUNICATIONS (2020)
A Generally Applicable Approach Using Sequential Deposition to Enable Highly Efficient Organic Solar Cells
Huiting Fu et al.
SMALL METHODS (2020)
Film-depth-dependent crystallinity for light transmission and charge transport in semitransparent organic solar cells
Tong Xiao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
A novel wide-bandgap small molecule donor for high efficiency all-small-molecule organic solar cells with small non-radiative energy losses
Yulong Wang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2020)
A Layer-by-Layer Architecture for Printable Organic Solar Cells Overcoming the Scaling Lag of Module Efficiency
Rui Sun et al.
JOULE (2020)
Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells
Andrew Wadsworth et al.
CHEMICAL SOCIETY REVIEWS (2019)
Correlations between Performance of Organic Solar Cells and Film-Depth-Dependent Optical and Electronic Variations
Zihao Wang et al.
ADVANCED OPTICAL MATERIALS (2019)
Temperature-Dependent Aggregation Donor Polymers Enable Highly Efficient Sequentially Processed Organic Photovoltaics Without the Need of Orthogonal Solvents
Lingeswaran Arunagiri et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Bilayer polymer solar cells prepared with transfer printing of active layers from controlled swelling/de-swelling of PDMS
Anisha Mohapatra et al.
NANO ENERGY (2019)
Interfacial and Bulk Nanostructures Control Loss of Charges in Organic Solar Cells
Hafiz Bilal Naveed et al.
ACCOUNTS OF CHEMICAL RESEARCH (2019)
Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors
Jiali Song et al.
ADVANCED MATERIALS (2019)
High-Performance Large-Area Organic Solar Cells Enabled by Sequential Bilayer Processing via Nonhalogenated Solvents
Sheng Dong et al.
ADVANCED ENERGY MATERIALS (2019)
Simultaneous Enhancement of Three Parameters of P3HT-Based Organic Solar Cells with One Oxygen Atom
Jianfei Wu et al.
ADVANCED ENERGY MATERIALS (2019)
Sequential Deposition of Organic Films with Eco-Compatible Solvents Improves Performance and Enables Over 12%-Efficiency Nonfullerene Solar Cells
Long Ye et al.
ADVANCED MATERIALS (2019)
A multi-objective optimization-based layer-by-layer blade-coating approach for organic solar cells: rational control of vertical stratification for high performance
Rui Sun et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Solvent Additives: Key Morphology-Directing Agents for Solution-Processed Organic Solar Cells
Caitlin McDowell et al.
ADVANCED MATERIALS (2018)
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
Guangye Zhang et al.
CHEMICAL REVIEWS (2018)
Monomolecular and Bimolecular Recombination of Electron-Hole Pairs at the Interface of a Bilayer Organic Solar Cell
Tobias Hahn et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells
Yu Zhong et al.
NATURE COMMUNICATIONS (2015)
Increased Open-Circuit Voltage of Organic Solar Cells by Reduced Donor-Acceptor Interface Area
Koen Vandewal et al.
ADVANCED MATERIALS (2014)
Investigation of Driving Forces for Charge Extraction in Organic Solar Cells: Transient Photocurrent Measurements on Solar Cells Showing S-Shaped Current-Voltage Characteristics
Wolfgang Tress et al.
ADVANCED ENERGY MATERIALS (2013)
Can morphology tailoring improve the open circuit voltage of organic solar cells?
Biswajit Ray et al.
APPLIED PHYSICS LETTERS (2012)
Open-circuit voltage in organic solar cells
Boyuan Qi et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Extracting Microscopic Device Parameters from Transient Photocurrent Measurements of P3HT:PCBM Solar Cells
Roderick C. I. MacKenzie et al.
ADVANCED ENERGY MATERIALS (2012)
Varying polymer crystallinity in nanofiber poly(3-alkylthiophene): PCBM solar cells: Influence on charge-transfer state energy and open-circuit voltage
Koen Vandewal et al.
APPLIED PHYSICS LETTERS (2009)
Reappraising the Need for Bulk Heterojunctions in Polymer-Fullerene Photovoltaics: The Role of Carrier Transport in All-Solution-Processed P3HT/PCBM Bilayer Solar Cells
Alexander L. Ayzner et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2009)