☆ 4.8 Review

Recent Progress of Y6-Derived Asymmetric Fused Ring Electron Acceptors

ADVANCED FUNCTIONAL MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Compromising Charge Generation and Recombination with Asymmetric Molecule for High-Performance Binary Organic Photovoltaics with Over 18% Certified Efficiency

Chengliang He et al.

Summary: Balancing charge generation and recombination is a major challenge in breaking the limitations of organic photovoltaics. Researchers have developed an asymmetric non-fullerene acceptor called AC9, demonstrating a high-performance OPV with a champion efficiency of 18.43%. Comprehensive analysis shows that the improved device performance of AC9-based OPVs is due to a better compromise between charge generation and non-radiative charge recombination compared to symmetric acceptors.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

Xiaopeng Xu et al.

Summary: By utilizing a sequential solution processing method, a more suitable IHJ nanostructure for organic solar cells has been achieved, leading to an increased power conversion efficiency. The IHJ structure, compared to the BHJ structure, can efficiently dissociate excitons, reduce charge recombination, and facilitate the transport of free electrons and holes through more straightforward pathways, ultimately enhancing performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A New End Group on Nonfullerene Acceptors Endows Efficient Organic Solar Cells with Low Energy Losses

Youwen Pan et al.

Summary: Chemical modifications were made to the famous Y-series nonfullerene acceptor BTP-4Cl-BO, resulting in the synthesis of two novel NFAs, BTP-T-2Cl and BTP-T-3Cl, with extended pi-conjugation through the fusing of IC group with a chlorinated thiophene ring. The OSC using BTP-T-2Cl exhibited a modest PCE of 14.89% with an extraordinary low energy loss of 0.49 eV, while the OSC using BTP-T-3Cl showed a higher PCE of 17.61% but with a slightly bigger energy loss of 0.51 eV. Adopting two NFAs of BTP-T-3Cl and BTP-4Cl-BO, a ternary OSC achieved an impressive PCE of 18.21%, demonstrating the effectiveness of expanding end groups of NFAs with electron-donating rings in reducing energy losses for OSCs.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Chlorination Enabling a Low-Cost Benzodithiophene-Based Wide-Bandgap Donor Polymer with an Efficiency of over 17%

Hang Wang et al.

Summary: Three regioregular benzodithiophene-based donor-donor (D-D)-type polymers were designed, synthesized, and used in organic solar cells (OSCs), with one of them, PBDTT1Cl, demonstrating superior performance in terms of power conversion efficiency, charge mobility, and nonradiative energy loss.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Comparison of Charge Carrier Dynamics in Organic and Perovskite Solar Cells

Jiaying Wu et al.

Summary: The dynamics of charge carriers in organic solar cells and organic-inorganic hybrid metal halide perovskite solar cells were compared, discussing similarities and differences in charge generation, separation, transport, collection, and recombination, as well as their impact on device performance.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination

Kaien Chong et al.

Summary: This work demonstrates highly efficient polymer solar cells by improving charge extraction and suppressing charge recombination through side-chain engineering, adopting ternary blends, and introducing volatilizable solid additives. The optimized molecular structure and blend morphology lead to improved fill factor and power conversion efficiency.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Design of Near-Infrared Nonfullerene Acceptor with Ultralow Nonradiative Voltage Loss for High-Performance Semitransparent Ternary Organic Solar Cells

Wuyue Liu et al.

Summary: Semitransparent organic solar cells (ST-OSCs) are important applications of organic solar cells, but the current high-performance ST-OSCs still lack a low enough optical band gap to achieve the optimal balance between power conversion efficiency and average visible transmittance. By designing and synthesizing a new acceptor SN and incorporating it into the PM6:Y6 system, the performance of the solar cells can be significantly improved.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Engineering, Environmental

Fused-heterocycle engineering on asymmetric non-fullerene acceptors enables organic solar cells approaching 29 mA/cm2 short-circuit current density

Yuanxia Song et al.

Summary: This study designed and synthesized three asymmetric NFAs based on different heterocycles, showing varying photovoltaic performance, with the BTP-Se-based device achieving the highest efficiency of 14.20% and the highest short-circuit current density of 28.66 mA cm(-2). The results demonstrate the success of the fused-benzoselenadiazole strategy in designing high-performance ultra-NBG asymmetric NFAs.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress in organic solar cells (Part I material science)

Yahui Liu et al.

Summary: In recent years, organic solar cells (OSCs) have made significant progress with power conversion efficiencies (PCEs) over 18%, showing promising practical applications. Key research focuses in the OSC field include development in material science and interface materials. The article systematically summarizes the recent progress in these areas and discusses current challenges and future developments.

SCIENCE CHINA-CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Benzo[1,2-b:4,5-b′]difuran Based Polymer Donor for High-Efficiency (>16%) and Stable Organic Solar Cells

Xiaoming Li et al.

Summary: A novel polymer donor, PBDF-NS, based on BDF polymer for OSCs achieved high efficiency with a PCE over 16% and demonstrated high stability. This suggests that through molecular design, BDF-based copolymers have the potential to realize high-efficiency all-polymer solar cells.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor

Rui Sun et al.

Summary: The ternary strategy is an effective approach to achieve high-efficiency OSCs, but the nonradiative voltage loss limits further efficiency improvements. By incorporating an asymmetric guest acceptor BTP-2F2Cl, the OSCs show improved photoluminescence quantum yield, exciton diffusion length, and absorption spectrum, leading to enhanced power conversion efficiency.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Oligomer-Assisted Photoactive Layers Enable >18 % Efficiency of Organic Solar Cells

Yujun Cheng et al.

Summary: In this research, a new concept of oligomer-assisted photoactive layers for ternary organic solar cells (OSCs) is proposed. The addition of oligomers substantially enhances the performance and stability of the cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

Reducing Photovoltaic Property Loss of Organic Solar Cells in Blade-Coating by Optimizing Micro-Nanomorphology via Nonhalogenated Solvent

Jiayou Zhang et al.

Summary: This study explores strategies for the preparation of efficient OSCs by combining nonhalogenated solvent toluene with blade-coating. The subtle relationship between processing solvents, film morphology, and properties is successfully established, and by optimizing the morphology and crystallinity, outstanding power conversion efficiency (PCE) results are achieved.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Editorial Material Physics, Condensed Matter

Nonfullerene acceptors based on perylene monoimides

Yutong Ji et al.

JOURNAL OF SEMICONDUCTORS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

The effect of alkyl substitution position of thienyl outer side chains on photovoltaic performance of A-DA′D-A type acceptors

Xiaolei Kong et al.

Summary: The side chain configuration of organic small molecule acceptors (SMAs) has been found to significantly impact their intermolecular interaction and aggregation morphology. In this study, two isomeric A-DA 'D-A type SMAs with thienyl outer side chains were designed and synthesized to investigate the effects of thienyl conjugated outer side chains and the alkyl substitution position on SMA properties. It was found that the beta-substituted m-TEH SMA exhibited stronger intermolecular interaction and higher electron mobility compared to the alpha-substituted o-TEH SMA. Furthermore, the m-TEH blend film with the PBQ6 polymer donor showed more suitable phase separation, enhanced molecular packing, and improved hole and electron mobilities compared to the o-TEH blend film. Organic solar cells based on PBQ6:m-TEH achieved a significantly higher power conversion efficiency (PCE) of 18.51% compared to PBQ6:o-TEH based solar cells. This study demonstrates that m-TEH with 2-ethylhexyl beta-substituted thienyl outer side chains is an excellent high-performance SMA for organic solar cells.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Morphology control in high-efficiency all-polymer solar cells

Kangkang Zhou et al.

Summary: This review discusses high-performance strategies for all-polymer solar cells (All-PSCs), focusing on morphology control. By driving the molecular design of novel polymer acceptors and optimizing morphology, the power conversion efficiency (PCE) of All-PSCs has rapidly developed and exceeded 17%. The crucial role of molecular miscibility in influencing morphological features and performance metrics is emphasized.

INFOMAT (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Polymerized Small-Molecule Acceptors for High-Performance All-Polymer Solar Cells

Zhi-Guo Zhang et al.

Summary: All-polymer solar cells have attracted significant research interest due to their good film formation, stable morphology, and mechanical flexibility. The strategy of polymerizing small-molecule acceptors to construct new-generation polymer acceptors has significantly increased the power conversion efficiency, but current challenges and future prospects still need to be addressed.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

17.1 %-Efficient Eco-Compatible Organic Solar Cells from a Dissymmetric 3D Network Acceptor

Hui Chen et al.

Summary: The performance of polymer solar cells processed by non-halogenated solvents was enhanced by designing and synthesizing a dissymmetric fused-ring acceptor BTIC-2Cl-gamma CF3, achieving a PCE of over 17% and showing significant advantages in storage and photo-stability, while extending the absorption peak to 852 nm.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Green-Solvent-Processable Organic Photovoltaics with High Performances Enabled by Asymmetric Non-Fullerene Acceptors

Yi-Jia Su et al.

Summary: Two asymmetric non-fullerene acceptors, BTP-EHBO-4F and BTP-PHD-4F, were designed and applied in green-solvent-processable organic photovoltaics (OPVs), demonstrating outstanding performance with o-xylene as the solvent. The devices based on these acceptors showed high power conversion efficiencies and excellent solubility compared to devices using Y6 as the acceptor. This was attributed to favorable phase separation, molecule packing, and orientation observed from AFM and GIWAXS measurements.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Volatilizable Solid Additive-Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Sunan Bao et al.

Summary: Controlling the self-assembly of organic semiconductors to form well-developed nanoscale phase separation is critical for building high-performance organic solar cells. A new approach utilizing the synergistic effect of DTT and CN is developed to tune the morphology of the photoactive layer, leading to a significant increase in power-conversion efficiency and fill factor in ternary OSCs processed with dual additives of CN and DTT.

ADVANCED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

Ming Zhang et al.

Summary: By using quaternary blends, double cascading energy level alignment is achieved in bulk heterojunction organic photovoltaic active layers, optimizing light absorption, carrier transport, and charge-transfer state energy levels for higher power conversion efficiencies. The chemical structures of donors and acceptors allow control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Asymmetric Alkoxy and Alkyl Substitution on Nonfullerene Acceptors Enabling High-Performance Organic Solar Cells

Yuzhong Chen et al.

Summary: The paper presents a strategy of asymmetric alkyl and alkoxy substitution on Y-series nonfullerene acceptors, achieving great performance in organic solar cell devices. Asymmetric substitution on Y6 results in a molecule that maintains V-oc improvement and good solubility, enabling highly efficient nonfullerene OSCs. This asymmetric side-chain strategy shows potential for improving the performance of other NFA-material systems.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Asymmetric Acceptors Enabling Organic Solar Cells to Achieve an over 17% Efficiency: Conformation Effects on Regulating Molecular Properties and Suppressing Nonradiative Energy Loss

Wei Gao et al.

Summary: This study demonstrates that adjusting the molecular conformation of Y6-type NFAs can lead to high efficiency and reduced energy loss in organic solar cells.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18%

Lingling Zhan et al.

Summary: This study proposes and demonstrates a method to optimize the morphology of the active layer in organic photovoltaic devices by combining the layer-by-layer (LbL) procedure and the ternary strategy. By adding an asymmetric electron acceptor to the binary donor:acceptor host, a vertical phase distribution is formed, leading to improved efficiency in OPV devices.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Alkyl-Chain Branching of Non-Fullerene Acceptors Flanking Conjugated Side Groups toward Highly Efficient Organic Solar Cells

Jianquan Zhang et al.

Summary: Side-chain modifications of NFAs play a crucial role in enhancing the performance of OSCs. By introducing bulkier alkyl chains branched at specific positions, it is possible to alter molecular packing, improve open-circuit voltage, and achieve better device performance. The side-chain branching design of NFAs shows great potential in optimizing molecular properties and promoting photovoltaic performance.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Enabling High Efficiency of Hydrocarbon-Solvent Processed Organic Solar Cells through Balanced Charge Generation and Non-Radiative Loss

Baobing Fan et al.

Summary: The researchers developed a simple method to process organic solar cells in non-halogenated solvents, achieving high power conversion efficiency by selecting suitable donor/acceptor materials and tuning solvent compositions.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Simple Nonfused Ring Electron Acceptors with 3D Network Packing Structure Boosting the Efficiency of Organic Solar Cells to 15.44%

Xiaodong Wang et al.

Summary: NFREAs with increasing pi-conjugation length show enhanced molar extinction coefficient and electron mobility in blend films. The molecular conformation of 2BTh-2F is planar, supported by S···N and S···O intramolecular interactions, and it forms a 3D network packing structure compared to the 2D packing of 2Th-2F. 2BTh-2F:PBDB-T-based organic solar cells achieve a high power conversion efficiency of 14.53%, reaching a record efficiency of 15.44% when D18 is used as the donor polymer.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend

Tao Liu et al.

Summary: The performance of all-polymer organic solar cells has been improved by introducing a small amount of BN-T, resulting in increased crystallinity and enhanced exciton harvesting and charge transport. This enhancement is attributed to the reduced nonradiative energy loss and improved energy and charge transfer between acceptors, making AP-OSCs potentially as efficient as devices based on small molecule acceptors.

JOULE (2021)

Add to Collection

Article Chemistry, Applied

Gradually modulating the three parts of D-π-A type polymers for high-performance organic solar cells

Jialing Zhou et al.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric Non-Fullerene Small-Molecule Acceptors toward High-Performance Organic Solar Cells

Dongxu Li et al.

Summary: In recent years, significant progress has been made in organic solar cells using asymmetric strategies to construct non-fullerene small molecule acceptors, achieving power conversion efficiencies of over 18%. Asymmetric acceptors not only impact molecular packing through changes in conformation but also achieve a balance between solubility and crystallinity.

ACS CENTRAL SCIENCE (2021)

Add to Collection

Article Energy & Fuels

A guest-assisted molecular-organization approach for >17% efficiency organic solar cells using environmentally friendly solvents

Haiyang Chen et al.

Summary: The research team successfully achieved power conversion efficiencies of over 17% in organic solar cells processed from green solvent paraxylene (PX) using a guest-assisted assembly strategy. This approach improved device operational stability and enabled uniform deposition on large-area modules with high efficiency, paving the way for industrial development of organic solar cells.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Side-Chain Engineering on Y-Series Acceptors with Chlorinated End Groups Enables High-Performance Organic Solar Cells

Yuzhong Chen et al.

Summary: Chemical modifications of non-fullerene acceptors have been shown to improve the efficiency of organic solar cells. By introducing chlorination and inner side-chain engineering, a higher power conversion efficiency was achieved. Furthermore, the impact of asymmetric alkoxy substitution on the outer side chains was studied, highlighting the importance of achieving a balance between open-circuit voltage and short-circuit current density.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

High-performance and eco-friendly semitransparent organic solar cells for greenhouse applications

Di Wang et al.

Summary: This study developed high-performance spectrally engineered semitransparent organic solar cells using green fabrication methods for greenhouse applications. Empowered by the newly designed quaternary blends, the solar cells achieved excellent power conversion efficiency and maintained good photovoltaic properties during fabrication with non-halogenated solvents to meet the needs of plant photon absorption.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency (16.93%) Pseudo-Planar Heterojunction Organic Solar Cells Enabled by Binary Additives Strategy

Xinkang Wang et al.

Summary: The research focuses on improving the efficiency of organic solar cells by combining the SD method and additive general strategy, resulting in a vertical phase separation device with enhanced morphology using additives 1,10-decanediol and 1-chloronaphthalene. This approach showed promising results in enhancing charge separation, collection, and ultimately achieving a high power conversion efficiency of 16.93%.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Organic Solar Cells Based on Asymmetric Acceptors Bearing One 3D Shape-Persistent Terminal Group

Hao Lu et al.

Summary: Three asymmetric non-fullerene acceptors incorporating a unique CBIC terminal group were synthesized, leading to improved solubility, enhanced crystallinity, and higher power conversion efficiency in organic solar cells compared to their symmetric counterparts. The combination of the CBIC terminal group with the asymmetric strategy shows promise in enhancing the performance of OSCs.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Emerging Chemistry in Enhancing the Chemical and Photochemical Stabilities of Fused-Ring Electron Acceptors in Organic Solar Cells

Hongtao Liu et al.

Summary: In the past five years, the power conversion efficiency of organic solar cells has significantly improved due to the emergence of fused-ring electron acceptors. In order to achieve commercialization, it is crucial to address the stability issues of OCSs from materials to devices. The state-of-the-art FREAs, synthesized by Knoevenagel condensation, exhibit poor chemical and photochemical stabilities due to their vulnerability to nucleophile attacking and/or photooxidation.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric Isomer Effects in Benzo[c ][1,2,5]thiadiazole-Fused Nonacyclic Acceptors: Dielectric Constant and Molecular Crystallinity Control for Significantly Photovoltaic Performance Enhancement

Wei Gao et al.

Summary: By systematically exploring asymmetric isomer effects, new non-acyclic electron acceptors were designed and synthesized to significantly improve the power conversion efficiency of organic solar cells. The asymmetric isomerization strategy effectively inhibits molecular aggregation and unfavorable orientations, leading to more efficient dissociation and optimized microstructure, resulting in a remarkably higher PCE.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Regioregular Narrow-Bandgap n-Type Polymers with High Electron Mobility Enabling Highly Efficient All-Polymer Solar Cells

Huiliang Sun et al.

Summary: The study successfully improved the efficiency of all-polymer solar cells by synthesizing narrow-bandgap polymer acceptors with regular structures. By introducing a ternary system with different components, further optimization of blend morphology and charge transport was achieved, leading to an enhanced power conversion efficiency.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Synergistic Strategy of Manipulating the Number of Selenophene Units and Dissymmetric Central Core of Small Molecular Acceptors Enables Polymer Solar Cells with 17.5 % Efficiency

Can Yang et al.

Summary: By using a dissymmetric backbone and selenophene substitution on the central core, symmetric or dissymmetric A-DA'D-A type non-fullerene small molecular acceptors with varying numbers of selenophene were synthesized, leading to improved device performance and efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-performance polymer solar cells with efficiency over 18% enabled by asymmetric side chain engineering of non-fullerene acceptors

Shihao Chen et al.

Summary: The research suggests that asymmetric side-chain engineering can effectively tune the properties of non-fullerene small-molecule acceptors (NFSMAs) and improve the power conversion efficiency for binary non-fullerene polymer solar cells (NFPSCs). Introducing proper asymmetric side chains in NFSMAs can induce favorable face-on molecule orientation, enhance carrier mobilities, balance charge transport, and reduce recombination losses, leading to improved overall performance in NFPSCs.

SCIENCE CHINA-CHEMISTRY (2021)

Add to Collection

Article Multidisciplinary Sciences

Unveiling structure-performance relationships from multi-scales in non-fullerene organic photovoltaics

Shuixing Li et al.

Summary: The study conducted on four non-fullerene acceptors reveals how extended conjugation, asymmetric terminals, and alkyl chain length can affect device performance. Understanding correlations between molecular structures and macroscopic properties is critical in realizing highly efficient organic photovoltaics.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

π-Conjugated Small Molecules Modified SnO2 Layer for Perovskite Solar Cells with over 23% Efficiency

Qiang Lou et al.

Summary: This work presents a new type of SnO2 passivator, which improves the efficiency of perovskite solar cells by optimizing molecular stacking to enhance interfacial characteristics. The impressive power conversion efficiency over 23% achieved with this new passivator is among the highest reported values for triple-cation perovskite systems to date.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A Thiadiazole-Based Conjugated Polymer with Ultradeep HOMO Level and Strong Electroluminescence Enables 18.6% Efficiency in Organic Solar Cell

Tao Zhang et al.

Summary: This study introduces a new thiadiazole-based conjugated polymer PB2F with a deep HOMO level, achieving high PCE in OSCs when blended with IT-4F. Furthermore, adding PB2F as a third component to PBDB-TF:BTP-eC9 blend leads to outstanding PCE, one of the highest in OSCs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Benzothiadiazole-based non-fullerene acceptors

Qingling Nie et al.

Summary: The power conversion efficiencies of organic solar cells have been greatly improved with the rapid development of non-fullerene acceptors in recent years, especially using benzothiadiazole as an important electron-accepting unit. By judicious molecular engineering, the optoelectronic properties of BT-based small molecules can be efficiently modulated to achieve high-efficiency photovoltaic devices. The highest PCE reached up to 18% due to the emergence of fused-BT-based molecule Y6, which has promoted the rapid progress of OSCs since 2019.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Small-molecular donor guest achieves rigid 18.5% and flexible 15.9% efficiency organic photovoltaic via fine-tuning microstructure morphology

Zhenyu Chen et al.

Summary: Incorporating highly ordered crystalline small molecules into host binary systems has been shown to significantly improve the photovoltaic performance of organic solar cells. By designing and synthesizing small molecular donors with similar chemical structures, it was found that the silicon-containing G19 exhibited a higher degree of order in the host system, resulting in improved power conversion efficiency.

JOULE (2021)

Add to Collection

Article Chemistry, Physical

A Pyrrole-Fused Asymmetrical Electron Acceptor for Polymer Solar Cells with Approaching 16% Efficiency

Zhenghui Luo et al.

Summary: The study synthesized two asymmetric SMAs, BTN-4F and BTSe-4F, with BTN-4F demonstrating higher power conversion efficiency and lower energy loss due to weaker bimolecular recombination, more balanced charge transport, and more favorable morphology.

SMALL STRUCTURES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric Glycolated Substitution for Enhanced Permittivity and Ecocompatibility of High-Performance Photovoltaic Electron Acceptor

Tengfei Li et al.

Summary: By designing and synthesizing a novel organic photovoltaic material named Y6-4O with an asymmetric oligo(ethylene glycol) side chain, the dielectric constant is increased and better solubility in nonhalogen solvents is achieved. Compared to traditional materials, the PM6:Y6-4O devices based on Y6-4O exhibit higher power conversion efficiencies.

JACS AU (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Impact of symmetry-breaking of non-fullerene acceptors for efficient and stable organic solar cells

Peddaboodi Gopikrishna et al.

Summary: This study demonstrates that asymmetric structural modifications of NFAs can improve the photovoltaic performance and stability of OSCs, with IPC-BEH-IC2F exhibiting the best material properties in this aspect.

CHEMICAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A facile strategy for third-component selection in non-fullerene acceptor-based ternary organic solar cells

Yun Li et al.

Summary: The ternary strategy has been proven effective for enhancing the power conversion efficiency of organic solar cells. A new design principle for selecting the appropriate third component, such as the non-fullerene acceptor, has been proposed and shown to significantly improve efficiency. This approach offers a promising pathway for further enhancing the performance of ternary OSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Recent progress on all-small molecule organic solar cells using small-molecule nonfullerene acceptors

Bin Kan et al.

Summary: Recent breakthroughs have been made in solution-processed organic solar cells combining small-molecule donor and nonfullerene acceptor, with certified efficiency over 15%. By modifying materials and optimizing morphology, researchers have achieved impressive progress in this area. Small-molecule materials with easily tuned properties will be a key focus for future developments.

INFOMAT (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Synergistic Strategy of Manipulating the Number of Selenophene Units and Dissymmetric Central Core of Small Molecular Acceptors Enables Polymer Solar Cells with 17.5% Efficiency

Can Yang et al.

Summary: The synthesis of symmetric or dissymmetric A-DA'D-A type non-fullerene small molecular acceptors (NF-SMAs) using a dissymmetric backbone and selenophene substitution on the central core leads to improved optical and electrical properties. Increasing the number of selenophene results in a red-shifted absorption, as well as larger electron mobility and crystallinity in the thin film. The combination of dissymmetric core and precise replacement of selenophene effectively enhances charge transport characteristics in binary polymer solar cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Altering alkyl-chains branching positions for boosting the performance of small-molecule acceptors for highly efficient nonfullerene organic solar cells

Zhenghui Luo et al.

SCIENCE CHINA-CHEMISTRY (2020)

Add to Collection

Article Multidisciplinary Sciences

Simultaneous enhanced efficiency and thermal stability in organic solar cells from a polymer acceptor additive

Wenyan Yang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric Acceptors with Fluorine and Chlorine Substitution for Organic Solar Cells toward 16.83% Efficiency

Tao Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Fibril Network Strategy Enables High-Performance Semitransparent Organic Solar Cells

Yuanpeng Xie et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric Electron Acceptors for High-Efficiency and Low-Energy-Loss Organic Photovoltaics

Shuixing Li et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Organic photovoltaic cell with 17% efficiency and superior processability

Yong Cui et al.

NATIONAL SCIENCE REVIEW (2020)

Add to Collection

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Polymer Acceptors Containing B←N Units for Organic Photovoltaics

Ruyan Zhao et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Bandgap Porphyrins for Highly Efficient Organic Solar Cells: Materials, Morphology, and Applications

Ke Gao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ladder-Type Heteroheptacenes with Different Heterocycles for Nonfullerene Acceptors

Yunlong Ma et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier

Qin Hu et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

Fine-Tuning Energy Levels via Asymmetric End Groups Enables Polymer Solar Cells with Efficiencies over 17%

Zhenghui Luo et al.

JOULE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Isomerization Strategy of Nonfullerene Small-Molecule Acceptors for Organic Solar Cells

Zhenghui Luo et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Solution-Processed Organic Solar Cells with High Open-Circuit Voltage of 1.3 V and Low Non-Radiative Voltage Loss of 0.16 V

Ning An et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A-DA'D-A non-fullerene acceptors for high-performance organic solar cells

Qingya Wei et al.

SCIENCE CHINA-CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Conformation-Tuning Effect of Asymmetric Small Molecule Acceptors on Molecular Packing, Interaction, and Photovoltaic Performance

Zhenghui Luo et al.

SMALL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

High-Efficiency Thermal-Annealing-Free Organic Solar Cells Based on an Asymmetric Acceptor with Improved Thermal and Air Stability

Jinsheng Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Toxic Solvent- and Additive-Free Efficient All-Polymer Solar Cells via a Simple Random Sequence Strategy in Both Donor and Acceptor Copolymer Backbones

Mingyu Jeong et al.

SMALL METHODS (2020)

Add to Collection

Article Chemistry, Physical

Alkyl chain engineering of chlorinated acceptors for elevated solar conversion

Daize Mo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

An asymmetrical fused-ring electron acceptor designed by a cross-conceptual strategy achieving 15.6% efficiency

Wei Gao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Mechanically Robust All-Polymer Solar Cells from Narrow Band Gap Acceptors with Hetero-Bridging Atoms

Qunping Fan et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

A bromine and chlorine concurrently functionalized end group for benzo[1,2-b:4,5-b′]diselenophene-based non-fluorinated acceptors: a new hybrid strategy to balance the crystallinity and miscibility of blend films for enabling highly efficient polymer solar cells

Shi-Sheng Wan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

A Layer-by-Layer Architecture for Printable Organic Solar Cells Overcoming the Scaling Lag of Module Efficiency

Rui Sun et al.

JOULE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

14.7% Efficiency Organic Photovoltaic Cells Enabled by Active Materials with a Large Electrostatic Potential Difference

Huifeng Yao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Review Chemistry, Physical

Asymmetric Nonfullerene Small Molecule Acceptors for Organic Solar Cells

Chao Li et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Solution-Processed Semitransparent Organic Photovoltaics: From Molecular Design to Device Performance

Viktor V. Brus et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

Yong Cui et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Eco-Compatible Solvent-Processed Organic Photovoltaic Cells with Over 16% Efficiency

Ling Hong et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-Oxygen-Bridged Ladder-Type Building Blocks for Highly Efficient Nonfullerene Acceptors

Zuo Xiao et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

14%-efficiency fullerene-free ternary solar cell enabled by designing a short side-chain substituted small-molecule acceptor

Yuan Chang et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance All-Polymer Solar Cells Enabled by an n-Type Polymer Based on a Fluorinated Imide-Functionalized Arene

Huiliang Sun et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A Simple Phenyl Group Introduced at the Tail of Alkyl Side Chains of Small Molecular Acceptors: New Strategy to Balance the Crystallinity of Acceptors and Miscibility of Bulk Heterojunction Enabling Highly Efficient Organic Solar Cells

Yonghai Li et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Jun Yuan et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Alkyl Chain Tuning of Small Molecule Acceptors for Efficient Organic Solar Cells

Kui Jiang et al.

JOULE (2019)

Add to Collection

Review Chemistry, Physical

Organic solar cells based on non-fullerene acceptors

Jianhui Hou et al.

NATURE MATERIALS (2018)

Add to Collection

Review Nanoscience & Nanotechnology

Non-fullerene acceptors for organic solar cells

Cenqi Yan et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Efficiency Near-Infrared and Semitransparent Non-Fullerene Acceptor Organic Photovoltaic Cells

Yongxi Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Add to Collection

Article Energy & Fuels

Emergence of highly transparent photovoltaics for distributed applications

Christopher J. Traverse et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Nonfullerene Polymer Solar Cells based on a Perylene Monoimide Acceptor with a High Open-Circuit Voltage of 1.3 V

Youdi Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Charge Generation Pathways in Organic Solar Cells: Assessing the Contribution from the Electron Acceptor

Dani M. Stoltzfus et al.

CHEMICAL REVIEWS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Non-Fullerene Electron Acceptors for Use in Organic Solar Cells

Christian B. Nielsen et al.

ACCOUNTS OF CHEMICAL RESEARCH (2015)

Add to Collection

Article Chemistry, Multidisciplinary

A Large-Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance

Maojie Zhang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Fluorene-centered perylene monoimides as potential non-fullerene acceptor in organic solar cells

Youdi Zhang et al.

ORGANIC ELECTRONICS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Correlated Donor/Acceptor Crystal Orientation Controls Photocurrent Generation in All-Polymer Solar Cells

Marcel Schubert et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

The Active Layer Morphology of Organic Solar Cells Probed with Grazing Incidence Scattering Techniques

Peter Mueller-Buschbaum

ADVANCED MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

High Performance All-Polymer Solar Cell via Polymer Side-Chain Engineering

Yan Zhou et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

Decacyclene Triimides: Paving the Road to Universal NonFullerene Acceptors for Organic Photovoltaics

Toan V. Pho et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Assembling Decacyclene Triimides Prepared through a Regioselective Hextuple Friedel-Crafts Carbamylation

Toan V. Pho et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

Add to Collection

Article Chemistry, Physical

A Narrow Optical Gap Small Molecule Acceptor for Organic Solar Cells

Yuan Fang et al.

ADVANCED ENERGY MATERIALS (2013)

Add to Collection

Review Chemistry, Multidisciplinary

Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption

Yongfang Li

ACCOUNTS OF CHEMICAL RESEARCH (2012)

Add to Collection

Article Physics, Applied

Theoretical limits for visibly transparent photovoltaics

Richard R. Lunt

APPLIED PHYSICS LETTERS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Semi-transparent polymer solar cells with 6% PCE, 25% average visible transmittance and a color rendering index close to 100 for power generating window applications

Kung-Shih Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

Carbazole-Based Ladder-Type Heptacylic Arene with Aliphatic Side Chains Leading to Enhanced Efficiency of Organic Photovoltaics

Yen-Ju Cheng et al.

CHEMISTRY OF MATERIALS (2011)

Add to Collection

Article Chemistry, Physical

Solution-Processed Organic Solar Cells with Power Conversion Efficiencies of 2.5% using Benzothiadiazole/Imide-Based Acceptors

Jason T. Bloking et al.

CHEMISTRY OF MATERIALS (2011)

Add to Collection

Article Chemistry, Physical

A Small Molecule Non-fullerene Electron Acceptor for Organic Solar Cells

Paul E. Schwenn et al.

ADVANCED ENERGY MATERIALS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Strain and Huckel Aromaticity: Driving Forces for a Promising New Generation of Electron Acceptors in Organic Electronics

F. G. Brunetti et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)

Add to Collection

Article Chemistry, Physical

N-type conjugated materials based on 2-vinyl-4,5-dicyanoimidazoles and their use in solar cells

Richard Yee Cheong Shin et al.

CHEMISTRY OF MATERIALS (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.