Related references
Note: Only part of the references are listed.Microstructure and wear of Ni-WC hardfacing used for steel-body PDC bits
Wei Liu et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2021)
Recent research and development status of laser cladding: A review
Lida Zhu et al.
OPTICS AND LASER TECHNOLOGY (2021)
Thermomechanical Wear Testing of Metal Matrix Composite Cladding for Potential Application in Hot Rolling Mills
Josef Domitner et al.
STEEL RESEARCH INTERNATIONAL (2020)
Core-rim microstructure and properties of WC/Ni composites
Hongzhi Cao et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Effect of Particle and Carbide Grain Sizes on a HVOAF WC-Co-Cr Coating for the Future Application on Internal Surfaces: Microstructure and Wear
J. Pulsford et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Influence of processing conditions on the degradation kinetics of fused tungsten carbides in hardfacing
Karsten Guenther et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Understanding the dissolution mechanism of fused tungsten carbides in Ni-based alloys: An experimental approach
Karsten Guenther et al.
MATERIALS LETTERS (2018)
The Aging Effects of Aluminum Magnesium Alloy Welding Wires
WELDING JOURNAL (2018)
Influence of large particle size - up to 1.2 mm - and morphology on wear resistance in NiCrBSi/WC laser cladded composite coatings
D. Deschuyteneer et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Embedment of eutectic tungsten carbides in arc sprayed steel coatings
Wolfgang Tillmann et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Effect of matrix chemistry and WC types on the performance of Ni-WC based MMC overlays deposited by plasma transferred arc (PTA) welding
Ravikumar Sundaramoorthy et al.
WEAR (2017)
A comparative study of the structure and wear resistance of NiCrBSi/50 wt.% WC composite coatings by laser cladding and laser induction hybrid cladding
Shengfeng Zhou et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Effect of carbide dissolution on the corrosion performance of tungsten carbide reinforced Inconel 625 wire laser coating
T. E. Abioye et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Wear resistance of diode laser-clad Ni/WC composite coatings at different temperatures
Zhikun Weng et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Laser cladding strategies for producing WC reinforced NiCr coatings inside twin barrels
Josu Leunda et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Laser cladding assisted with an induction heater (LCAIH) of Ni-60%WC coating
Parisa Farahmand et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Processing and characterization of laser clad NiCrBSi/WC composite coatings - Influence of microstructure on hardness and wear
D. Deschuyteneer et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC
M. R. Fernandez et al.
WEAR (2015)
An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser
Parisa Farahmand et al.
OPTICS AND LASER TECHNOLOGY (2014)
Non-wetting behaviour of tungsten carbide powders in nickel weld pool: new loss mechanism in GMAW overlays
S. D. Guest et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2014)
Effect of W dissolution in NiCrBSi-WC and NiBSi-WC arc sprayed coatings on wear behaviors
Panadda Sheppard et al.
WEAR (2014)
Welding processes for wear resistant overlays
Patricio F. Mendez et al.
JOURNAL OF MANUFACTURING PROCESSES (2014)
The Effects of Carbide Characteristics on the Performance of Tungsten Carbide-Based Composite Overlays, Deposited by Plasma-Transferred Arc Welding
G. Fisher et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
Tensile properties and fracture behavior of laser cladded WC/Ni composite coatings with different contents of WC particle studied by in-situ tensile testing
Jin-Sha Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation
T. E. Abioye et al.
SURFACE ENGINEERING (2013)
Analysis of WC/Ni-Based Coatings Deposited by Controlled Short-Circuit MIG Welding
P. Vespa et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Microstructure and Sliding Wear Resistance of Laser Cladded WC/Ni Composite Coatings with Different Contents of WC Particle
J. S. Xu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Effects of WC-Ni content on microstructure and wear resistance of laser cladding Ni-based alloys coating
Chun Guo et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Quantitative evaluation of the decarburization and microstructure evolution of WC-Co during plasma spraying
Qing Zhan et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Microstructures and abrasive wear performance of PTAW deposited Ni-WC overlays using different Ni-alloy chemistries
T. Liyanage et al.
WEAR (2012)
Ni-based metal matrix composite functionally graded coatings
J. M. Amado et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Microstructures and mechanical properties of metallic NiCrBSi and composite NiCrBSi-WC layers manufactured via hybrid plasma/laser process
Nicolas Serres et al.
APPLIED SURFACE SCIENCE (2011)
Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions
C. Katsich et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Phase transformation of NiCrBSi-WC and NiBSi-WC arc sprayed coatings
Panadda Niranatlumpong et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Assessing the resistance of metal matrix composites and their microstructural integrity under erosion-corrosion
Juan F. Flores et al.
WEAR (2011)
The influence of carbide dissolution on the erosion-corrosion properties of cast tungsten carbide/Ni-based PTAW overlays
M. Jones et al.
WEAR (2011)
Laser induction hybrid rapid cladding of WC particles reinforced NiCrBSi composite coatings
Shengfeng Zhou et al.
APPLIED SURFACE SCIENCE (2010)
Influence of welding current on carbide/matrix interface properties in MMCs
Ch. Just et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Effects of interface formation kinetics on the microstructural properties of wear-resistant metal-matrix composites
S. Ilo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Influence of processing conditions on the carbide/matrix interface in sintered composite layers
Ch. Just et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings
M. R. Ramesh et al.
WEAR (2010)
Effects of processing parameters on structure of Ni-based WC composite coatings during laser induction hybrid rapid cladding
Shengfeng Zhou et al.
APPLIED SURFACE SCIENCE (2009)
Laser cladding of tungsten carbides (Spherotene®) hardfacing alloys for the mining and mineral industry
J. M. Amado et al.
APPLIED SURFACE SCIENCE (2009)
Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding
Janne Nurminen et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Processing optimization, surface properties and wear behavior of HVOF spraying WC-CrC-Ni coating
W. Fang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Relation Between Inter-Particle Distance (L-IPD) and Abrasion in Multiphase Matrix-Carbide Materials
R. Polak et al.
TRIBOLOGY LETTERS (2009)
An experimental study of the erosion-corrosion behavior of plasma transferred arc MMCs
J. F. Flores et al.
WEAR (2009)
Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization
Shengfeng Zhou et al.
APPLIED SURFACE SCIENCE (2008)
Microstructure and properties of HVOF-sprayed chromium alloyed WC-Co and WC-Ni coatings
L. -M. Berger et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Influence of welding parameters on microstructure and wear behaviour of a typical NiCrBSi hardfacing alloy reinforced with tungsten carbide
E. Badisch et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Neutron and x-ray diffraction study and symmetry analysis of phase transformations in lower tungsten carbide W2C
A. S. Kurlov et al.
PHYSICAL REVIEW B (2007)
Development and characterization of composite Ni-Cr plus WC laser cladding
L. St-Georges
WEAR (2007)
FEM modeling of the interface and its effect on the elastio-plastic behavior of metal matrix composites
D. P. Mondal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Morphology and characterization of laser clad composite NiCrBSi-WC coatings on stainless steel
M. J. Tobar et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Effect of laser power on microstructure and wear resistance of WCp/Ni cermet coating
Si Song-hua et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2006)
Tungsten carbides and W-C phase diagram
AS Kurlov et al.
INORGANIC MATERIALS (2006)
Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings
K Van Acker et al.
WEAR (2005)
Influence of WC particle behavior on the wear resistance properties of Ni-WC composite coatings
P Wu et al.
WEAR (2004)
Abrasive wear performance and microstructure of laser clad WC/Ni layers
SW Huang et al.
WEAR (2004)
Microstructural characterization and wear behavior of laser cladded nickel-based and tungsten carbide composite coatings
P Wu et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Effect of carbide grain size on microstructure and sliding wear behavior of HVOF-sprayed WC-12% Co coatings
QQ Yang et al.
WEAR (2003)
Structure of laser cladded tungsten carbide composite coatings
J Przybylowicz et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Microstructural evolution in thermally sprayed WC-Co coatings: Comparison between nanocomposite and conventional starting powders
DA Stewart et al.
ACTA MATERIALIA (2000)
Share Paper
