Related references
Note: Only part of the references are listed.Strategies for damage tolerance enhancement in metal/ceramic thin films: Lessons learned from Ti/TiN
Ashwini Kumar Mishra et al.
ACTA MATERIALIA (2022)
Anisotropic super-hardness of hexagonal WB2±z thin films
C. Fuger et al.
MATERIALS RESEARCH LETTERS (2022)
Investigation for oxidation mechanism of CrN: A combination of DFT and ab initio molecular dynamics study
Qingxin Kang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance
Nikola Koutna et al.
ACTA MATERIALIA (2021)
Mechanical properties of single and polycrystalline α-Al2O3 coatings grown by chemical vapor deposition
Fabian Konstantiniuk et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Stress-sensitive fatigue crack initiation mechanisms of coated titanium alloy
Yanyun Bai et al.
ACTA MATERIALIA (2021)
Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings
Christina Kainz et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Fatigue strength and mechanism of Ti6242S titanium alloy with TiAlN coating deposited under various bias voltages
NithyaGnana Poorani Sivagnanam Chandra et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Mechanistic study of superlattice-enabled high toughness and hardness in MoN/TaN coatings
Rainer Hahn et al.
COMMUNICATIONS MATERIALS (2020)
Effect of coating thickness on fatigue behavior of TiAlN coated Ti-alloys
NithyaGnana Poorani Sivagnanam Chandra et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Anomalous slip of ZrB2 ceramic grains during in-situ micropillar compression up to 500 °C
Tamas Csanadi et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Brittle coating effects on fatigue cracks behavior in Ti alloys
Yanyun Bai et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Assessment of ductile character in superhard Ta-C-N thin films
T. Glechner et al.
ACTA MATERIALIA (2019)
A review of the intrinsic ductility and toughness of hard transition-metal nitride alloy thin films
H. Kindlund et al.
THIN SOLID FILMS (2019)
Fatigue of metals at nanoscale: Metal thin films and conductive interconnects for flexible device application
XueMei Luo et al.
NANO MATERIALS SCIENCE (2019)
Cleavage cracking of ductile-metal substrates induced by brittle coating fracture
Tao Guo et al.
ACTA MATERIALIA (2018)
Investigations on micro-mechanical properties of polycrystalline Ti(C,N) and Zr(C,N) coatings
Idriss El Azhari et al.
ACTA MATERIALIA (2018)
High frequency in situ fatigue response of Ni-base superalloy Rene-N5 microcrystals
Steven Lavenstein et al.
ACTA MATERIALIA (2018)
Valence electron concentration as an indicator for mechanical properties in rocksalt structure nitrides, carbides and carbonitrides
Karthik Balasubramanian et al.
ACTA MATERIALIA (2018)
Fracture toughness of Ti-Si-N thin films
M. Bartosik et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Fracture toughness of Mo2BC thin films: Intrinsic toughness versus system toughening
R. Soler et al.
MATERIALS & DESIGN (2018)
In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing
Markus Alfreider et al.
MATERIALS & DESIGN (2018)
Fracture mechanics of micro samples: Fundamental considerations
R. Pippan et al.
MATERIALS & DESIGN (2018)
Accelerated thermo-mechanical fatigue of copper metallizations studied by pulsed laser heating
Stefan Wurster et al.
MICROELECTRONIC ENGINEERING (2017)
Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening
Rostislav Daniel et al.
ACTA MATERIALIA (2017)
On the influence of microcantilever pre-crack geometries on the apparent fracture toughness of brittle materials
Steffen Brinckmann et al.
ACTA MATERIALIA (2017)
Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars
R. Fritz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Small-scale fracture toughness of ceramic thin films: the effects of specimen geometry, ion beam notching and high temperature on chromium nitride toughness evaluation
James P. Best et al.
PHILOSOPHICAL MAGAZINE (2016)
Nitrogen-doped bcc-Cr films: Combining ceramic hardness with metallic toughness and conductivity
G. Greczynski et al.
SCRIPTA MATERIALIA (2016)
On the reversibility of dislocation slip during small scale low cycle fatigue
C. Kirchlechner et al.
ACTA MATERIALIA (2015)
Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction
A. Wimmer et al.
ACTA MATERIALIA (2015)
Densification and mechanical properties of CrB2+MoSi2 based novel composites
Vidhyasagar Reddy et al.
CERAMICS INTERNATIONAL (2015)
Atomistic aspects of fracture
Erik Bitzek et al.
INTERNATIONAL JOURNAL OF FRACTURE (2015)
Influence of initial microstructure on thermomechanical fatigue behavior of Cu films on substrates
W. Heinz et al.
MICROELECTRONIC ENGINEERING (2015)
High cycle fatigue properties of Cu films
T. Walter et al.
MICROELECTRONIC ENGINEERING (2015)
Processing and Characterization of CrB2-Based Novel Composites
R. D. Bedse et al.
HIGH TEMPERATURE MATERIALS AND PROCESSES (2015)
Fatigue property improvements of Ti-6Al-4V by thin film coatings of metallic glass and TiN: a comparison study
C. M. Lee et al.
THIN SOLID FILMS (2014)
Nanotwin-assisted grain growth in nanocrystalline gold films under cyclic loading
Xue-Mei Luo et al.
NATURE COMMUNICATIONS (2014)
A customizable software for fast reduction and analysis of large X-ray scattering data sets: applications of the new DPDAK package to small-angle X-ray scattering and grazing-incidence small-angle X-ray scattering
Gunthard Benecke et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2014)
Demonstration of an in situ microscale fatigue testing technique on a titanium alloy
C. J. Szczepanski et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Elevated temperature, nano-mechanical testing in situ in the scanning electron microscope
J. M. Wheeler et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2013)
X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films
J. Keckes et al.
SCRIPTA MATERIALIA (2012)
Fatigue behavior of PVD coated Ti-6Al-4V alloy
M. Y. P. Costa et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Evaluating the effects of plasma diffusion processing and duplex diffusion/PVD-coating on the fatigue performance of Ti-6Al-4V alloy
G. Cassar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Computational Evaluation of Adhesion and Mechanical Properties of Nanolayered Erosion-Resistant Coatings for Gas Turbines
Mariusz Bielawski et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2011)
Crystal Orbital Hamilton Population (COHP) Analysis As Projected from Plane-Wave Basis Sets
Volker L. Deringer et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2011)
Length scale dependent yield strength and fatigue behavior of nanocrystalline Cu thin films
J. Y. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Anisotropic elastic constants and thermal expansivities in monocrystal CrB2, TiB2, and ZrB2
Norihiko L. Okamoto et al.
ACTA MATERIALIA (2010)
Plasticity in Confined Dimensions
Oliver Kraft et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Cyclic response of copper single crystal micro-beams
D. Kiener et al.
SCRIPTA MATERIALIA (2010)
Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction
C. Kirchlechner et al.
THIN SOLID FILMS (2010)
A structure zone diagram including plasma-based deposition and ion etching
Andre Anders
THIN SOLID FILMS (2010)
In-situ SEM indentation studies of the deformation mechanisms in TiN, CrN and TiN/CrN
K. Rzepiejewska-Malyska et al.
MICRON (2009)
Cyclic Slip Irreversibilities and the Evolution of Fatigue Damage
Hael Mughrabi
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2009)
A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films
Kurt Matoy et al.
THIN SOLID FILMS (2009)
Thickness dependent fatigue life at microcrack nucleation for metal thin films on flexible substrates
X. J. Sun et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)
Dislocation avalanches, strain bursts, and the problem of plastic forming at the micrometer scale
Ferenc F. Csikor et al.
SCIENCE (2007)
Interfacial microstructure of chromium oxide coatings
Xiaolu Pang et al.
ADVANCED ENGINEERING MATERIALS (2007)
The effect of pulsed magnetron sputtering on the structure and mechanical properties of CrB2 coatings
M. Audronis et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Mechanical size-effects in miniaturized and bulk materials
Gerhard Dehm et al.
ADVANCED ENGINEERING MATERIALS (2006)
Length-scale-controlled fatigue mechanisms in thin copper films
G. P. Zhang et al.
ACTA MATERIALIA (2006)
Review of analysis and interpretation of nanoindentation test data
AC Fischer-Cripps
SURFACE & COATINGS TECHNOLOGY (2006)
Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams
D Di Maio et al.
JOURNAL OF MATERIALS RESEARCH (2005)
Sample dimensions influence strength and crystal plasticity
MD Uchic et al.
SCIENCE (2004)
Strain and texture analysis of coatings using high-energy x-rays
J Almer et al.
JOURNAL OF APPLIED PHYSICS (2003)
Size effects in the fatigue behavior of thin Ag films
R Schwaiger et al.
ACTA MATERIALIA (2003)
Fatigue in thin films: lifetime and damage formation
O Kraft et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Chromium - a material for fusion technology
R Wadsack et al.
FUSION ENGINEERING AND DESIGN (2001)
Small fatigue cracks: Mechanics, mechanisms and engineering applications
RO Ritchie et al.
MATERIALS TRANSACTIONS JIM (2001)
Share Paper
