Related references
Note: Only part of the references are listed.Temperature-dependent universal dislocation structures and transition of plasticity enhancing mechanisms of the Fe40Mn40Co10Cr10 high entropy alloy
Jin-Kyung Kim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Heterogeneous lamella design to tune the mechanical behaviour of a new cost-effective compositionally complicated alloy
Yu Yin et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Crack-resistant σ/FCC interfaces in the Fe40Mn40Co10Cr10 high entropy alloy with the dispersed σ-phase
Donggyun You et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Simultaneous enhancement in strength and ductility of Fe50Mn30Co10Cr10 high-entropy alloy via nitrogen alloying
Yu Han et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
A TWIP-TRIP quinary high-entropy alloy: Tuning phase stability and microstructure for enhanced mechanical properties
Zemeng Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Heterostructured materials: superior properties from hetero-zone interaction
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2021)
Hetero-deformation-induced (HDI) plasticity induces simultaneous increase in both yield strength and ductility in a Fe50Mn30Co10Cr10 high-entropy alloy
Dong Liu et al.
APPLIED PHYSICS LETTERS (2021)
Unusual strain-induced martensite and absence of conventional grain refinement in twinning induced plasticity high-entropy alloy processed by high-pressure torsion
Praveen Sathiyamoorthi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Simultaneously enhanced strength and strain hardening capacity in FeMnCoCr high-entropy alloy via harmonic structure design
Guodong Li et al.
SCRIPTA MATERIALIA (2021)
Awakening the metastability of an interstitial high entropy alloy via severe deformation
Shuya Zhu et al.
SCRIPTA MATERIALIA (2021)
Nitrogen-induced hardening in an austenitic CrFeMnNi high-entropy alloy (HEA)
Mathieu Traversier et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Enhanced cryogenic tensile properties with multi-stage strain hardening through partial recrystallization in a ferrous medium-entropy alloy
Jae Wung Bae et al.
SCRIPTA MATERIALIA (2021)
Interactions between Dislocations and Boundaries during Deformation
Hongjiang Pan et al.
MATERIALS (2021)
Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy
Zhufeng He et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Hierarchical grain size and nanotwin gradient microstructure for improved mechanical properties of a non-equiatomic CoCrFeMnNi high-entropy alloy
Zibing An et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Influence of grain size distribution on mechanical properties and HDI strengthening and work-hardening of gradient-structured materials
Yindong Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Non-equiatomic FeMnCrNiAl high-entropy alloys with heterogeneous structures for strength and ductility combination
D. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy
Jongun Moon et al.
SCRIPTA MATERIALIA (2021)
Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength
Feng He et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass
X. T. Fang et al.
ACTA MATERIALIA (2020)
Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy
Wenqi Guo et al.
ACTA MATERIALIA (2020)
Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy
X. H. Du et al.
NATURE COMMUNICATIONS (2020)
Effect of grain size on the strain rate sensitivity of CoCrFeNi high-entropy alloy
Yakai Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Carbon and nitrogen co-doping enhances phase stability and mechanical properties of a metastable high-entropy alloy
Wanying Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of nitrogen on mechanical properties of CoCrFeMnNi high entropy alloy at room and cryogenic temperatures
M. Klimova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
Xiaoyan Li et al.
NATURE REVIEWS MATERIALS (2020)
Aged metastable high-entropy alloys with heterogeneous lamella structure for superior strength-ductility synergy
Cheng Zhang et al.
ACTA MATERIALIA (2020)
Plastic strain-induced sequential martensitic transformation
Shaolou Wei et al.
SCRIPTA MATERIALIA (2020)
Towards ferrous medium-entropy alloys with low-cost and high-performance
Jae Wung Bae et al.
SCRIPTA MATERIALIA (2020)
Cocktail effects in understanding the stability and properties of face-centered-cubic high-entropy alloys at ambient and cryogenic temperatures
B. X. Cao et al.
SCRIPTA MATERIALIA (2020)
Towards understanding the structure-property relationships of heterogeneous-structured materials
Jianguo Li et al.
SCRIPTA MATERIALIA (2020)
Fracture of sigma phase containing Co-Cr-Ni-Mo medium entropy alloys
D. H. Chung et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Simultaneous twinning and microband formation under dynamic compression in a high entropy alloy with a complex energetic landscape
D. L. Foley et al.
ACTA MATERIALIA (2020)
Effect of carbon on microstructure and mechanical properties of Fe36Mn36Ni9Cr9Al10 high-entropy alloys
Li Bai et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Effect of second phase particles on mechanical properties and grain growth in a CoCrFeMnNi high entropy alloy
M. V. Klimova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae
Peijian Shi et al.
NATURE COMMUNICATIONS (2019)
Deformation-driven bidirectional transformation promotes bulk nanostructure formation in a metastable interstitial high entropy alloy
Jing Su et al.
ACTA MATERIALIA (2019)
Solid solution strengthening theories of high-entropy alloys
Carlyn R. LaRosa et al.
MATERIALS CHARACTERIZATION (2019)
Nano-graining a particle-strengthened high-entropy alloy
Dong-Hyun Lee et al.
SCRIPTA MATERIALIA (2019)
Perspective on hetero-deformation induced (HDI) hardening and back stress
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2019)
Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy
Jian Peng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys
S. R. Reddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Selective laser melting enabling the hierarchically heterogeneous microstructure and excellent mechanical properties in an interstitial solute strengthened high entropy alloy
Z. G. Zhu et al.
MATERIALS RESEARCH LETTERS (2019)
Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy
Jing Su et al.
ACTA MATERIALIA (2019)
Effect of grain size on the tensile behavior of V10Cr15Mn5Fe35Co10Ni25 high entropy alloy
Peyman Asghari-Rad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure
S. W. Wu et al.
ACTA MATERIALIA (2019)
Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures
Y. Tong et al.
ACTA MATERIALIA (2019)
Achieving high strength and high ductility in Al0.3CoCrNi medium-entropy alloy through multi-phase hierarchical microstructure
Praveen Sathiyamoorthi et al.
MATERIALIA (2019)
Back-stress-induced strengthening and strain hardening in dual-phase steel
X. L. Liu et al.
MATERIALIA (2019)
Thermal stability and coarsening of coherent particles in a precipitation-hardened (NiCoFeCr)(94)Ti2Al4 high-entropy alloy
Y. Y. Zhao et al.
ACTA MATERIALIA (2018)
Role of brittle sigma phase in cryogenic-temperature-strength improvement of non-equi-atomic Fe-rich VCrMnFeCoNi high entropy alloys
Yong Hee Jo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Partially-recrystallized, Nb-alloyed TWIP steels with a superior strength-ductility balance
Hojun Gwon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Bidirectional Transformation Enables Hierarchical Nanolaminate Dual-Phase High-Entropy Alloys
Wenjun Lu et al.
ADVANCED MATERIALS (2018)
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Zhifeng Lei et al.
NATURE (2018)
A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength
Zhiqiang Fu et al.
SCIENCE ADVANCES (2018)
The effect of vanadium micro-alloying on the microstructure and the tensile behavior of TWIP steel
Hojun Gwon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructures and mechanical properties of Ti and Mo micro-alloyed medium Mn steel
Dongyeol Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals
Evan Ma et al.
MATERIALS TODAY (2017)
Materials selection considerations for high entropy alloys
X. Fu et al.
SCRIPTA MATERIALIA (2017)
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
Y. H. Jo et al.
NATURE COMMUNICATIONS (2017)
Core-shell nanoparticle arrays double the strength of steel
J. -B. Seol et al.
SCIENTIFIC REPORTS (2017)
Synthesis of metastable chromium carbide nanomaterials and their electrocatalytic activity for the hydrogen evolution reaction
Samantha M. Schmuecker et al.
DALTON TRANSACTIONS (2017)
A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior
Zhiming Li et al.
ACTA MATERIALIA (2017)
An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy
L. R. Owen et al.
ACTA MATERIALIA (2017)
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
G. Laplanche et al.
ACTA MATERIALIA (2016)
Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel
Jin-Kyung Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off
Zhiming Li et al.
NATURE (2016)
Back stress strengthening and strain hardening in gradient structure
Muxin Yang et al.
MATERIALS RESEARCH LETTERS (2016)
Design of a twinning-induced plasticity high entropy alloy
Y. Deng et al.
ACTA MATERIALIA (2015)
An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading
Ahmed A. Saleh et al.
APPLIED PHYSICS LETTERS (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Multicomponent and High Entropy Alloys
Brian Cantor
ENTROPY (2014)
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
F. Otto et al.
ACTA MATERIALIA (2013)
Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys
K. -Y. Tsai et al.
ACTA MATERIALIA (2013)
Local Atomic Structure of a High-Entropy Alloy: An X-Ray and Neutron Scattering Study
Wei Guo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Strain-hardening of twinning-induced plasticity steels
O. Bouaziz
SCRIPTA MATERIALIA (2012)
The conflicts between strength and toughness
Robert O. Ritchie
NATURE MATERIALS (2011)
The stress field of an array of parallel dislocation pile-ups: Implications for grain boundary hardening and excess dislocation distributions
Rafael Schouwenaars et al.
ACTA MATERIALIA (2010)
Refractory high-entropy alloys
O. N. Senkov et al.
INTERMETALLICS (2010)
Nanomechanics of Hall-Petch relationship in nanocrystalline materials
C. S. Pande et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Extraction of flow properties of single-crystal silicon carbide by nanoindentation and finite-element simulation
Sanghoon Shim et al.
ACTA MATERIALIA (2008)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Share Paper
