☆ 4.8 Article

Design of the Thermal Restructured Carbon-Inorganic Composite Aerogel for Efficient Thermal Protection of Aero-Engines

ACS APPLIED MATERIALS & INTERFACES (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

A novel method to synthesize high-strength elastic gel and carbonized aerogel

Xingyu Huang et al.

Summary: This article introduces a simple and effective method for preparing carbon aerogels. By using a two-step curing method, phenol-formaldehyde resin carbon aerogels with high mechanical strength and low thermal conductivity were successfully obtained with a macroporous/microporous hierarchical structure.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Thermodynamics

Numerical investigation and optimization of flat plate transpiration-film combined cooling structure

Yumei Lv et al.

Summary: A new optimized structure, named transpiration-film combined cooling structure, is proposed to improve the cooling effectiveness of laminated structure at higher Bi-number. By replacing the lower impingement plate with a porous layer, the outside film coverage is improved and the internal heat transfer is enhanced. The numerical results show that the combined structure significantly improves the overall cooling effectiveness, temperature uniformity, and reduces the frictional resistance on the structure surface.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Materials Science, Ceramics

Effect of SiO2 deposition on thermal stability of Al2O3-SiO2 aerogel

Huijun Yu et al.

Summary: The SiO2-deposited Al2O3-SiO2 aerogel (Si-ASA) with high thermal stability and mechanical properties was synthesized by silica deposition method. Compared with ASA without silica deposition, Si-ASA maintains higher specific surface areas after being calcined at high temperatures, inhibits the formation of mullite phase, and restrains the growth of gamma-Al2O3 by forming more Si-OA-l bonds.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Construction & Building Technology

Incorporation of activated bauxite to enhance engineering properties and microstructure of volcanic ash geopolymer mortar composites

Leonel N. Tchadjie et al.

Summary: Mechanical activation of bauxite using ball milling can enhance its geopolymeric reactivity, while geopolymer mortar composites partially replacing volcanic ash with activated bauxite show promising mechanical and physical properties, making them suitable for structural applications.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Disordered interfaces enable high temperature thermal stability and strength in a nanocrystalline aluminum alloy

Glenn H. Balbus et al.

Summary: Intentional design of interface disorder, co-segregation of Ce and Ni, and formation of amorphous intergranular films contribute to exceptional thermal stability and elevated temperature strength in a ternary nanocrystalline Al-Ni-Ce alloy. This highlights the efficacy of promoting disorder in alloy design and discovery for outstanding mechanical performance at high homologous temperatures.

ACTA MATERIALIA (2021)

Add to Collection

Article Engineering, Manufacturing

Lightweight multiscale hybrid carbon-quartz fiber fabric reinforced phenolic-silica aerogel nanocomposite for high temperature thermal protection

Haiming Cheng et al.

Summary: The multiscale hybrid method enhances the thermal ablative and insulative properties of lightweight ablative materials in high temperature oxidation extreme environment, and the fabricated lightweight carbon-quartz fiber fabric reinforced phenolic-silica aerogel nanocomposite inherits their nanoporous microstructure and fascinating properties, resulting in remarkable high compressive strength and low thermal conductivity.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Review Chemistry, Physical

Critical Raw Materials Saving by Protective Coatings under Extreme Conditions: A Review of Last Trends in Alloys and Coatings for Aerospace Engine Applications

Maria Luisa Grilli et al.

Summary: This paper discusses the latest trends in coatings for high temperature alloys in aerospace engines, as well as scenarios for current and future savings of CRMs in alloys and coatings for aerospace engines. The aim is to raise awareness of the CRM issue in alloys and coatings for aerospace, and suggest mitigation measures without providing a comprehensive overview or a turnkey solution.

MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Three-Dimensional-Printed Silica Aerogels for Thermal Insulation by Directly Writing Temperature-Induced Solidifiable Inks

Lukai Wang et al.

Summary: The thermal-solidifying 3D printing strategy can be used to fabricate silica aerogels with complex architectures, exhibiting comparable performances to traditional aerogels and holding promise for custom design and industrial production of insulation materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Chemical

High-hydrophobic ZIF-8@PLA composite aerogel and application for oil-water separation

Yucheng Li et al.

Summary: A hierarchical porous ZIF-8@PLA composite aerogel has been prepared, showing improved oil wettability, mechanical properties, and oil-water separation performance.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Robust three-dimensional porous rGO aerogel anchored with ultra-fine α-Fe2O3 nanoparticles exhibit dominated pseudocapacitance behavior for superior lithium storage

Cong Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Interface failure behavior of yttria stabilized zirconia (YSZ), La2Zr2O7, Gd2Zr2O7, YSZ/La2Zr2O7 and YSZ/Gd2Zr2O7 thermal barrier coatings (TBCs) in thermal cyclic exposure

Abdullah Cahit Karaoglanli et al.

MATERIALS CHARACTERIZATION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ Interface Design in Graphene-Embedded Polymeric Silica Aerogel with Organic/Inorganic Hybridization

Solmaz Karamikamkar et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lightweight, High-Strength, and Anisotropic Structure Composite Aerogel Based on Hydroxyapatite Nanocrystal and Chitosan with Thermal Insulation and Flame Retardant Properties

Jundong Zhu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Infrared Analysis of Interfacial Phenomena during Electrochemical Reduction of CO2 over Polycrystalline Copper Electrodes

Mozhgan Moradzaman et al.

ACS CATALYSIS (2020)

Add to Collection

Article Thermodynamics

Sensitivity analysis of internal layout and coating thickness to overall cooling performances of laminated cooling configurations with surface thermal barrier coatings

Xin Huang et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Review Engineering, Aerospace

Thermal protection systems for space vehicles: A review on technology development, current challenges and future prospects

Obinna Uyanna et al.

ACTA ASTRONAUTICA (2020)

Add to Collection

Article Thermodynamics

An experimental investigation on cooling characteristics of a vane laminated end-wall with axial-row layout of film-holes

Wei Wang et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Materials Science, Ceramics

Quartz fiber reinforced Al2O3-SiO2 aerogel composite with highly thermal stability by ambient pressure drying

Huijun Yu et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

Add to Collection

Article Chemistry, Physical

Production of HMF from glucose using an Al3+-promoted acidic phenol-formaldehyde resin catalyst

Tingwei Zhang et al.

CATALYSIS COMMUNICATIONS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Composite ceramics thermal barrier coatings of yttria stabilized zirconia for aero-engines

Qiaomu Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fire-Retardant and Thermally Insulating Phenolic-Silica Aerogels

Zhi-Long Yu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Engineering, Civil

An improved SST k - ω model for pollutant dispersion simulations within an isothermal boundary layer

K. An et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2018)

Add to Collection

Article Chemistry, Applied

One-step synthesis of monolithic micro-nano yttria stabilized ZrO2-Al2O3 composite aerogel

Zhenyu Shi et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2018)

Add to Collection

Article Thermodynamics

Experimental investigation of combined transpiration and film cooling for sintered metal porous struts

Pei-Xue Jiang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Chemistry, Physical

The effect of high temperature sol-gel polymerization parameters on the microstructure and properties of hydrophobic phenol-formaldehyde/silica hybrid aerogels

Mohamad Mehdi Seraji et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Applied

A novel starch-enhanced melamine-formaldehyde aerogel with low volume shrinkage and high toughness

Yong Zhang et al.

JOURNAL OF POROUS MATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Heat-resistant, strong alumina-modified silica aerogel fabricated by impregnating silicon oxycarbide aerogel with boehmite sol

Jie Ma et al.

MATERIALS & DESIGN (2017)

Add to Collection

Article Chemistry, Physical

Three-dimensional hierarchical porous graphene aerogel for efficient adsorption and preconcentration of chemical warfare agents

Qiang Han et al.

CARBON (2017)

Add to Collection

Letter Biochemistry & Molecular Biology

Polyethylene bio-degradation by caterpillars?

Carina Weber et al.

CURRENT BIOLOGY (2017)

Add to Collection

Article Polymer Science

Synthesis and Mechanism of Metal-Mediated Polymerization of Phenolic Resins

Zhao Yi et al.

POLYMERS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

An Interface-Induced Co-Assembly Approach Towards Ordered Mesoporous Carbon/Graphene Aerogel for High-Performance Supercapacitors

Ruili Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Materials Science, Paper & Wood

Ultralight carbon aerogel from nanocellulose as a highly selective oil absorption material

Yujie Meng et al.

CELLULOSE (2015)

Add to Collection

Article Engineering, Mechanical

Biot Number Analogy for Design of Experiments in Turbine Cooling

Saiprashanth Gomatam Ramachandran et al.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Interactive Oxidation-Reduction Reaction for the in Situ Synthesis of Graphene-Phenol Formaldehyde Composites with Enhanced Properties

Xiaojia Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Article Materials Science, Ceramics

Lanthanum-titanium-aluminum oxide: A novel thermal barrier coating material for applications at 1300°C

Xiaoyun Xie et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)

Add to Collection

Article Materials Science, Coatings & Films

Overview on advanced thermal barrier coatings

Robert Vassen et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Facile fabrication of SiO2/Al2O3 composite microspheres with a simple electrostatic attraction strategy

Bei Cheng et al.

MATERIALS RESEARCH BULLETIN (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.