4.8 Article

Environmentally Tolerant Ionic Hydrogel with High Power Density for Low-Grade Heat Harvesting

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Initiating a Stretchable, Compressible, and Wearable Thermoelectric Generator by a Spiral Architecture with Ternary Nanocomposites for Efficient Heat Harvesting

Lirong Liang et al.

Summary: The study synthesized flexible PEDOT-Tos/Te/SWCNTs nanocomposite films and assembled them into 3D TEGs for efficient thermoelectric conversion. Through a spiral structure, device-level flexibility and compressibility were achieved, with stable energy output.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

3D Hierarchical Electrodes Boosting Ultrahigh Power Output for Gelatin-KCl-FeCN4-/3- Ionic Thermoelectric Cells

Yuchen Li et al.

Summary: Ionic thermoelectric (i-TE) cells, using ions as energy carriers, have the potential to power IoT sensors near room temperature with high voltage. A 3D hierarchical structure electrode is designed to increase the electroactive surface area, resulting in improved power density and energy density. The quasi-solid-state gelatin-KCl-FeCN4-/3- i-TE cells achieve record power output and can be used to develop reliable and green power sources for IoT sensors.

ADVANCED ENERGY MATERIALS (2022)

Article Nanoscience & Nanotechnology

Carbonized Silk Nanofibers in Biodegradable, Flexible Temperature Sensors for Extracellular Environments

Zhan Yang et al.

Summary: A highly sensitive, biocompatible, and degradable temperature sensor was proposed in this study for detecting the extracellular environments of living cells. The sensor, based on silk materials, exhibited biocompatibility, biodegradability, and flexibility, and showed promising response to cells at different temperatures.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Nanoscience & Nanotechnology

Regulating Thermogalvanic Effect and Mechanical Robustness via Redox Ions for Flexible Quasi-Solid-State Thermocells

Peng Peng et al.

Summary: This study proposed a flexible quasi-solid-state TEC based on a rational design of a hydrogel electrolyte, in which the thermogalvanic effect and mechanical robustness are simultaneously regulated via multivalent ions. The introduced redox ions endow the hydrogel with excellent heat-to-electricity conversion capability and act as ionic crosslinks for effective energy dissipation. The optimized TEC exhibits a high Seebeck coefficient and significantly improved fracture toughness, demonstrating its potential as a flexible and durable energy supply system for wearable applications.

NANO-MICRO LETTERS (2022)

Article Engineering, Environmental

Nanocellulose/LiCl systems enable conductive and stretchable electrolyte hydrogels with tolerance to dehydration and extreme cold conditions

Wenjiao Ge et al.

Summary: The study proposes a double network hydrogel synthesized by one-step polymerization reaction, utilizing LiCl to enhance interactions between the colloidal phase and water molecules, ensuring water retention capability and freezing tolerance over a wide temperature range. The synergy between LiCl and CNF maintains mechanical strength and enables high stretchability and ionic conductivity in the system at low temperatures.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

A Wavy-Structured Highly Stretchable Thermoelectric Generator with Stable Energy Output and Self-Rescuing Capability

Zhuoxin Liu et al.

Summary: This study proposes a wavy architecture and stretchable self-healable hydrogel to create a TEG with good wearability and high energy output, providing constant energy supply upon injuries or damages.

CCS CHEMISTRY (2021)

Article Nanoscience & Nanotechnology

Gridding Triboelectric Nanogenerator for Raindrop Energy Harvesting

Bolang Cheng et al.

Summary: In this study, a gridding triboelectric nanogenerator (G-TENG) is designed to effectively harvest the mechanical energy of raindrops on a large scale. Each unit of the G-TENG can work independently, avoiding the mutual counteraction of elastic deformation among adjacent positions. The generator performs well under a wide range of raindrop flow rates, marking an important breakthrough in raindrop energy harvesting.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Multidimensional Force Sensors Based on Triboelectric Nanogenerators for Electronic Skin

Zhenyi Wang et al.

Summary: By using a single-electrode-mode triboelectric nanogenerator (S-TENG), a fully elastic E-skin capable of sensing both normal pressure and shear force simultaneously has been developed. The pressure sensor shows high linearity and sensitivity in the low-pressure region, while the multidimensional force sensor utilizes two S-TENGs to detect normal pressure and shear force separately. When mounted on a robotic manipulator, the sensor can recognize changes in grabbing state, suggesting potential applications in robotics, human-robot interactions, environmental awareness, and object recognition.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Elastic aerogel thermoelectric generator with vertical temperature-difference architecture and compression-induced power enhancement

Xiaodong Wang et al.

Summary: An elastic poly(3,4-ethylenedioxytiophene)-tosylate(PEDOT-Tos)/single-walled carbon nanotube (SWCNT) TE aerogel was fabricated for the first time, leading to the development of elastic TEGs with vertical-type aerogel legs displaying high TE performance and adjustable output power. Furthermore, the ultralight and compressible TEG showed excellent capability of harvesting heat under vertical temperature difference and mechanical deformation.

NANO ENERGY (2021)

Article Chemistry, Physical

Wearable self-powered human motion sensors based on highly stretchable quasi-solid state hydrogel

Jianhao Chen et al.

Summary: Self-powered flexible sensors using hydrogel technology can detect human motion and sound, driven by harvested body heat. With impressive elongation and strain sensitivity, these sensors offer potential for various applications ranging from wearable electronics to health monitoring. The combination of flexibility, environmentally friendliness, sensitivity and thermoelectric performance makes them a promising choice in the field of self-powered sensors.

NANO ENERGY (2021)

Article Nanoscience & Nanotechnology

Polyacrylamide Hydrogel Composite E-skin Fully Mimicking Human Skin

Feng-Lian Yi et al.

Summary: This study developed a transparent e-skin that can mimic human skin with J-shaped mechanical behavior and tactile sensing attributes, using polyacrylamide and ultrahigh molecular weight polyethylene fiber as key materials to achieve high transparency, softness, flexibility, stretch-ability, and strain sensing capability for various human activities monitoring and structural integrity protection.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Environmental

Ionic conductive hydrogels with long-lasting antifreezing, water retention and self-regeneration abilities

Xiaojie Sui et al.

Summary: Conductive hydrogels face issues of water freezing, water loss, and inability to self-regenerate, but the introduction of highly hydratable lithium chloride has led to the development of a novel ionic conductive hydrogel with antifreezing, water retention, and self-regeneration abilities. This hydrogel can withstand ultralow temperatures for extended periods and rapidly self-regenerate even in dehydrated states.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Double-network thermocells with extraordinary toughness and boosted power density for continuous heat harvesting

Zhouyue Lei et al.

Summary: This study introduces double chemically crosslinked networks to address the mechanical challenges of thermocells while also improving power density. The newly designed thermocell shows large stretchability, impressive strength, extraordinary toughness, and a boosted output power density.

JOULE (2021)

Article Chemistry, Physical

A mixed ion-electron conducting carbon nanotube ionogel to efficiently harvest heat from both a temperature gradient and temperature fluctuation

Hanlin Cheng et al.

Summary: By utilizing flexible mixed ion-electron thermoelectric converters consisting of ionogels made of ionic liquid and single-walled carbon nanotubes, waste heat can be efficiently converted into electricity, with significantly improved performance compared to traditional thermoelectric generators.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Multidisciplinary Sciences

Power generation from ambient humidity using protein nanowires

Xiaomeng Liu et al.

NATURE (2020)

Article Multidisciplinary Sciences

Ionoelastomer junctions between polymer networks of fixed anions and cations

Hyeong Jun Kim et al.

SCIENCE (2020)

Article Multidisciplinary Sciences

Giant thermopower of ionic gelatin near room temperature

Cheng-Gong Han et al.

SCIENCE (2020)

Article Multidisciplinary Sciences

A biomimetic eye with a hemispherical perovskite nanowire array retina

Leilei Gu et al.

NATURE (2020)

Article Multidisciplinary Sciences

Artificial multimodal receptors based on ion relaxation dynamics

Insang You et al.

SCIENCE (2020)

Article Multidisciplinary Sciences

Large-area low-noise flexible organic photodiodes for detecting faint visible light

Canek Fuentes-Hernandez et al.

SCIENCE (2020)

Article Multidisciplinary Sciences

Ultra-sensitive and resilient compliant strain gauges for soft machines

Oluwaseun A. Araromi et al.

NATURE (2020)

Article Multidisciplinary Sciences

Stretchable distributed fiber-optic sensors

Hedan Bai et al.

SCIENCE (2020)

Article Chemistry, Physical

3D Printed SnSe Thermoelectric Generators with High Figure of Merit

Matthew R. Burton et al.

ADVANCED ENERGY MATERIALS (2019)

Article Nanoscience & Nanotechnology

Versatile Electronic Skins with Biomimetic Micronanostructures Fabricated Using Natural Reed Leaves as Templates

Yu-Qng Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Multidisciplinary Sciences

Aqueous thermogalvanic cells with a high Seebeck coefficient for low-grade heat harvest

Jiangjiang Duan et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Self-Powered Real-Time Arterial Pulse Monitoring Using Ultrathin Epidermal Piezoelectric Sensors

Dae Yong Park et al.

ADVANCED MATERIALS (2017)

Review Chemistry, Multidisciplinary

Flexible Nanogenerators for Energy Harvesting and Self-Powered Electronics

Feng Ru Fan et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Ionic thermoelectric supercapacitors

D. Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Highly efficient and bending durable perovskite solar cells: toward a wearable power source

Byeong Jo Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Physical

A Composite Gel-Polymer/Glass-Fiber Electrolyte for Sodium-Ion Batteries

Hongcai Gao et al.

ADVANCED ENERGY MATERIALS (2015)

Review Chemistry, Physical

Triboelectric nanogenerators as self-powered active sensors

Sihong Wang et al.

NANO ENERGY (2015)

Review Chemistry, Multidisciplinary

Advances of flexible pressure sensors toward artificial intelligence and health care applications

Yaping Zang et al.

MATERIALS HORIZONS (2015)

Article Chemistry, Multidisciplinary

Ionic Skin

Jeong-Yun Sun et al.

ADVANCED MATERIALS (2014)

Review Chemistry, Multidisciplinary

Fiber-Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications

Wei Zeng et al.

ADVANCED MATERIALS (2014)

Review Chemistry, Multidisciplinary

New directions for low-dimensional thermoelectric materials

Mildred S. Dresselhaus et al.

ADVANCED MATERIALS (2007)