Related references
Note: Only part of the references are listed.Natural lotus root-based scaffolds for bone regeneration
Keqing Huang et al.
CHINESE CHEMICAL LETTERS (2022)
Tetrahedral framework nucleic acids regulate osteogenic differentiation potential of osteoporotic adipose-derived stem cells
Tianyu Chen et al.
CHINESE CHEMICAL LETTERS (2022)
Fabrication of Antibacterial, Osteo-Inductor 3D Printed Aerogel-Based Scaffolds by Incorporation of Drug Laden Hollow Mesoporous Silica Microparticles into the Self-Assembled Silk Fibroin Biopolymer
Philipp Ng et al.
MACROMOLECULAR BIOSCIENCE (2022)
Responsive biomaterials for 3D bioprinting: A review
Zhouquan Fu et al.
MATERIALS TODAY (2022)
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
M. A. S. R. Saadi et al.
ADVANCED MATERIALS (2022)
Enabling technologies towards personalization of scaffolds for large bone defect regeneration
Patrina S. P. Poh et al.
CURRENT OPINION IN BIOTECHNOLOGY (2022)
A fast on-demand preparation of injectable self-healing nanocomposite hydrogels for efficient osteoinduction
Panpan Pan et al.
CHINESE CHEMICAL LETTERS (2021)
Cancellous bone-like porous Fe@Zn scaffolds with core-shell-structured skeletons for biodegradable bone implants
Jin He et al.
ACTA BIOMATERIALIA (2021)
MiR-181d-5p regulates implant surface roughness-induced osteogenic differentiation of bone marrow stem cells
Yanping Liu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Elastin-like polypeptide modified silk fibroin porous scaffold promotes osteochondral repair
Zhuoyue Chen et al.
BIOACTIVE MATERIALS (2021)
Poly(lactic-co-glycolic acid)-based composite bone-substitute materials
Duoyi Zhao et al.
BIOACTIVE MATERIALS (2021)
3D-printed biodegradable composite scaffolds with significantly enhanced mechanical properties via the combination of binder jetting and capillary rise infiltration process
Ji-Ho Ahn et al.
ADDITIVE MANUFACTURING (2021)
Recent advances in PLGA-based biomaterials for bone tissue regeneration
Shue Jin et al.
ACTA BIOMATERIALIA (2021)
3D Printing of Antibacterial, Biocompatible, and Biomimetic Hybrid Aerogel-Based Scaffolds with Hierarchical Porosities via Integrating Antibacterial Peptide-Modified Silk Fibroin with Silica Nanostructure
Nighat Karamat-Ullah et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2021)
Lotus seedpod-inspired internal vascularized 3D printed scaffold for bone tissue repair
Xiaoyu Han et al.
BIOACTIVE MATERIALS (2021)
Boosting the Osteogenic and Angiogenic Performance of Multiscale Porous Polycaprolactone Scaffolds by In Vitro Generated Extracellular Matrix Decoration
Betul Aldemir Dikici et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
A Review of 3D Printing Technologies for Soft Polymer Materials
Lu-Yu Zhou et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Bioactive polymeric scaffolds for osteogenic repair and bone regenerative medicine
Nazanin Amiryaghoubi et al.
MEDICINAL RESEARCH REVIEWS (2020)
3D printing of Haversian bone-mimicking scaffolds for multicellular delivery in bone regeneration
Meng Zhang et al.
SCIENCE ADVANCES (2020)
Materials design for bone-tissue engineering
Gerry L. Koons et al.
NATURE REVIEWS MATERIALS (2020)
Construction of Biomimetic Natural Wood Hierarchical Porous-Structure Bioceramic with Micro/Nanowhisker Coating to Modulate Cellular Behavior and Osteoinductive Activity
Lina Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
PLA/PLGA-Based Drug Delivery Systems Produced with Supercritical CO2-A Green Future for Particle Formulation?
Gauri Gangapurwala et al.
PHARMACEUTICS (2020)
Biomimetic gelatin/HA biocomposites with effective elastic properties and 3D-structural flexibility using a 3D-printing process
Dongyun Kim et al.
ADDITIVE MANUFACTURING (2020)
Direct ink writing advances in multi-material structures for a sustainable future
Victoria G. Rocha et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
3D printing of bone tissue engineering scaffolds
Chong Wang et al.
BIOACTIVE MATERIALS (2020)
Controllable fabrication of porous PLGA/PCL bilayer membrane for GTR using supercritical carbon dioxide foaming
Chaobo Song et al.
APPLIED SURFACE SCIENCE (2019)
Bioceramics to regulate stem cells and their microenvironment for tissue regeneration
Yanling Zhou et al.
MATERIALS TODAY (2019)
Osteogenic magnesium incorporated into PLGA/TCP porous scaffold by 3D printing for repairing challenging bone defect
Yuxiao Lai et al.
BIOMATERIALS (2019)
Flexibility Enhancement of Poly(lactide-co-glycolide) for Fused Deposition Modeling Technology
Seunggyu Jeon et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)
Mechanically Strong Silica-Silk Fibroin Bioaerogel: A Hybrid Scaffold with Ordered Honeycomb Micromorphology and Multiscale Porosity for Bone Regeneration
Hajar Maleki et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Hierarchical-Porous Ceramic Foams by a Combination of Replica and Freeze Technique
Katja Schelm et al.
ADVANCED ENGINEERING MATERIALS (2019)
Polymer Fiber Scaffolds for Bone and Cartilage Tissue Engineering
Yanbo Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
3D Superelastic Scaffolds Constructed from Flexible Inorganic Nanofibers with Self-Fitting Capability and Tailorable Gradient for Bone Regeneration
Lihuan Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Hierarchically Porous Hydroxyapatite Hybrid Scaffold Incorporated with Reduced Graphene Oxide for Rapid Bone Ingrowth and Repair
Kai Zhou et al.
ACS NANO (2019)
Porous composite scaffold incorporating osteogenic phytomolecule icariin for promoting skeletal regeneration in challenging osteonecrotic bone in rabbits
Yuxiao Lai et al.
BIOMATERIALS (2018)
A novel layer-structured scaffold with large pore sizes suitable for 3D cell culture prepared by near-field electrospinning
Feng-Li He et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Injectable 3D Porous Micro-Scaffolds with a Bio-Engine for Cell Transplantation and Tissue Regeneration
Zuyuan Luo et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Extrusion assisted by supercritical CO2: A review on its application to biopolymers
Margot Chauvet et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2017)
Bone biomaterials and interactions with stem cells
Chengde Gao et al.
BONE RESEARCH (2017)
Hierarchically Porous Calcium Carbonate Scaffolds for Bone Tissue Engineering
Abiy D. Woldetsadik et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
3D Printing of Lotus Root-Like Biomimetic Materials for Cell Delivery and Tissue Regeneration
Chun Feng et al.
ADVANCED SCIENCE (2017)
Hierarchically Porous Calcium Carbonate Scaffolds for Bone Tissue Engineering
Abiy D. Woldetsadik et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Change in surface roughness by dynamic shape-memory acrylate networks enhances osteoblast differentiation
Erin M. Lee et al.
BIOMATERIALS (2016)
The effect of fiber size and pore size on cell proliferation and infiltration in PLLA scaffolds on bone tissue engineering
Xuejun Wang et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2016)
The nanocomposite nature of bone drives its strength and damage resistance
Ottman A. Tertuliano et al.
NATURE MATERIALS (2016)
Hyperelastic bone: A highly versatile, growth factor-free, osteoregenerative, scalable, and surgically friendly biomaterial
Adam E. Jakus et al.
SCIENCE TRANSLATIONAL MEDICINE (2016)
Endothelial cell alignment as a result of anisotropic strain and flow induced shear stress combinations
Ravi Sinha et al.
SCIENTIFIC REPORTS (2016)
Biologically Inspired Smart Release System Based on 3D Bioprinted Perfused Scaffold for Vascularized Tissue Regeneration
Haitao Cui et al.
ADVANCED SCIENCE (2016)
Investigation of thermal degradation with extrusion-based dispensing modules for 3D bioprinting technology
Hyungseok Lee et al.
BIOFABRICATION (2016)
Elucidating the individual effects of calcium and phosphate ions on hMSCs by using composite materials
Charlene B. S. S. Danoux et al.
ACTA BIOMATERIALIA (2015)
Angiogenesis in Bone Regeneration: Tailored Calcium Release in Hybrid Fibrous Scaffolds
Oscar Castano et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Porous SiOC beads by freeze-drying polycarbosilane emulsions
Yeon Hwang et al.
MATERIALS LETTERS (2014)
Size dependent static and dynamic behavior of trabecular bone based on micromechanical models of the trabecular architecture
Ibrahim Goda et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2013)
Fabrication of porous chitosan scaffolds for soft tissue engineering using dense gas CO2
Chengdong Ji et al.
ACTA BIOMATERIALIA (2011)
Polyurethane (PU) scaffolds prepared by solvent casting/particulate leaching (SCPL) combined with centrifugation
DongChoon Sin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
Solubility and Diffusivity of Carbon Dioxide in Solid-State Isotactic Polypropylene by the Pressure-Decay Method
Da-chao Li et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)
The effect of pore size on cell adhesion in collagen-GAG scaffolds
FJ O'Brien et al.
BIOMATERIALS (2005)
Biomechanical considerations of animal models used in tissue engineering of bone
MAK Liebschner
BIOMATERIALS (2004)
A review of CO2 applications in the processing of polymers
DL Tomasko et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2003)
Biomaterials and bone mechanotransduction
VI Sikavitsas et al.
BIOMATERIALS (2001)