Related references
Note: Only part of the references are listed.Chemical Polishing of Additively Manufactured, Porous, Nickel-Titanium Skeletal Fixation Plates
Agnieszka Chmielewska et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2022)
Fracture and fatigue in additively manufactured metals
Thorsten Hermann Becker et al.
ACTA MATERIALIA (2021)
Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
Erfan Maleki et al.
ADDITIVE MANUFACTURING (2021)
A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components
Jian-Yuan Lee et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
Numerical and experimental study on the ultrasonic-assisted soft abrasive flow polishing characteristics
Jiang-qin Ge et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
A review on magnetic abrasive finishing
Cheng Qian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Analysis of the machinability when milling AlSi10Mg additively manufactured via laser-based powder bed fusion
Marco Zimmermann et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Solidification microstructure and tensile deformation mechanisms of selective electron beam melted Ni3Al-based alloy at room and elevated temperatures
Y. Yao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
A Mathematical Dimensional Model for Predicting Bulk Density of Inconel 718 Parts Produced by Selective Laser Melting
Jorge A. Estrada-Diaz et al.
MATERIALS (2021)
Additive Manufacturing Processes in Medical Applications
Mika Salmi
MATERIALS (2021)
Topological, Mechanical and Biological Properties of Ti6Al4V Scaffolds for Bone Tissue Regeneration Fabricated with Reused Powders via Electron Beam Melting
Maria Laura Gatto et al.
MATERIALS (2021)
Cost Modeling and Evaluation of Direct Metal Laser Sintering with Integrated Dynamic Process Planning
Lei Di et al.
SUSTAINABILITY (2021)
Laser Powder Bed Fusion of Potential Superalloys: A Review
Prince Valentine Cobbinah et al.
METALS (2021)
Microstructure, Mechanical Properties, and Fatigue Fracture Characteristics of High-Fracture-Resistance Selective Laser Melting Al-Ni-Cu Alloys
Kai-Chieh Chang et al.
METALS (2021)
Laser processing of metal foam - A review
Anirban Changdar et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
The characterisation and formation of novel microstructural features in a Ti-Nb-Zr-Mo-Sn alloy manufactured by Laser Engineered Net Shaping (LENS)
Hanliang Zhu et al.
ADDITIVE MANUFACTURING (2021)
Superior energy absorption of continuously graded microlattices by electron beam additive manufacturing
Sing Ying Choy et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
On the role of laser in situ re-melting into pore elimination of Ti-6Al-4V components fabricated by selective laser melting
Fei Lv et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Prediction of residual stress with multi-physics model for orthogonal cutting Ti-6Al-4V under various tool wear morphologies
Xiaoliang Liang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion
Chao Cai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Characterization of AA7075/AA5356 gradient transition zone in an electron beam wire-feed additive manufactured sample
V Utyaganova et al.
MATERIALS CHARACTERIZATION (2021)
Effect of pulsed electron beam treatment on microstructure and functional properties of Al-5.4Si-1.3Cu alloy
Dmitrii Zaguliaev et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2021)
Laser polishing for improving fatigue performance of additive manufactured Ti-6Al-4V parts
Seungjong Lee et al.
OPTICS AND LASER TECHNOLOGY (2021)
Engineered net shaping of alumina ceramics using picosecond laser
I Esmail et al.
OPTICS AND LASER TECHNOLOGY (2021)
Recent trends in laser cladding and surface alloying
Anas Ahmad Siddiqui et al.
OPTICS AND LASER TECHNOLOGY (2021)
A technique combining laser spot thermography and neural network for surface crack detection in laser engineered net shaping
Wenxiong Shi et al.
OPTICS AND LASERS IN ENGINEERING (2021)
Additive manufacturing of 316L stainless-steel structures using fused filament fabrication technology: mechanical and geometric properties
Miguel Angel Caminero et al.
RAPID PROTOTYPING JOURNAL (2021)
Mechanical properties of thermoplastic parts produced by fused deposition modeling: a review
Ali Alperen Bakir et al.
RAPID PROTOTYPING JOURNAL (2021)
Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties
S. Alsubari et al.
POLYMERS (2021)
Advances in Metal Additive Manufacturing: A Review of Common Processes, Industrial Applications, and Current Challenges
Ana Vafadar et al.
APPLIED SCIENCES-BASEL (2021)
Laser Additive Manufacturing of Fe-Based Magnetic Amorphous Alloys
Merve G. Ozden et al.
MAGNETOCHEMISTRY (2021)
Principle, process, and application of metal plasma electrolytic polishing: a review
Yu Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
Seong-Hyun Park et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
Measurement of mechanical and fatigue properties using unified, simple-geometry specimens: Cold spray additively manufactured pure metals
J. Cizek et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
Anil Kumar Singla et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Tailoring cold spray additive manufacturing of steel 316 L for static and cyclic load-bearing applications
Sara Bagherifard et al.
MATERIALS & DESIGN (2021)
Post-processing treatments to enhance additively manufactured polymeric parts: a review
F. Tamburrino et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
Role of thermal spray in combating climate change
V. Viswanathan et al.
EMERGENT MATERIALS (2021)
The Electropolishing of Additively Manufactured Parts in Titanium: State of the Art
Annalisa Acquesta et al.
ADVANCED ENGINEERING MATERIALS (2021)
Plasma sprayed Lanthanum zirconate coating over additively manufactured carbon nanotube reinforced Ni-based Composite: Unique performance of thermal barrier coating system without bondcoat
Sumit Choudhary et al.
APPLIED SURFACE SCIENCE (2021)
Investigation on the electrochemical assisted magnetic abrasive finishing for a stainless steel of SUS304
Xu Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Postprocessing of Additively Manufactured Metal Parts
Wayne Hung
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Osteoclast-mediated resorption on additively manufactured porous metal and plasma-sprayed HA-coated Ti implants
Naboneeta Sarkar et al.
JOURNAL OF MATERIALS RESEARCH (2021)
Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy
Munish Kumar Gupta et al.
TRIBOLOGY INTERNATIONAL (2021)
Investigation of Post-Processing of Additively Manufactured Nitinol Smart Springs with Plasma-Electrolytic Polishing
Vincent N. Stepputat et al.
MATERIALS (2021)
Surface Finishing of Additive Manufactured Ti-6Al-4V Alloy: A Comparison between Abrasive Fluidized Bed and Laser Finishing
Eleonora Atzeni et al.
MATERIALS (2021)
A review on post processing techniques of additively manufactured metal parts for improving the material properties
K. A. Shiyas et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review
Narongkorn Krajangsawasdi et al.
JOURNAL OF COMPOSITES SCIENCE (2021)
Corrosion behavior of the electroless Ni-P coating on the pore walls of the lotus-type porous copper
Chuanyu Cui et al.
CORROSION SCIENCE (2020)
Assessment of trapped powder removal and inspection strategies for powder bed fusion techniques
Luke W. Hunter et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A hybrid approach to improve microstructure and mechanical properties of cold spray additively manufactured A380 aluminum composites
Xiang Qiu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Surface finishing on IN625 additively manufactured surfaces by combined ultrasonic cavitation and abrasion
K. L. Tan et al.
ADDITIVE MANUFACTURING (2020)
Surface modification of prototypes in fused filament fabrication using chemical vapour smoothing
Mulan Mu et al.
ADDITIVE MANUFACTURING (2020)
Surface roughness and densification correlation for direct metal laser sintering
Faridreza Attarzadeh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Post-Processing of Complex SLM Parts by Barrel Finishing
Alberto Boschetto et al.
APPLIED SCIENCES-BASEL (2020)
Fatigue performance of cold spray deposits: Coating, repair and additive manufacturing cases
Sara Bagherifard et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Abrasive Water Jet Machining process: A state of art of review
Yuvaraj Natarajan et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Laser polishing of additively manufactured Ti-6Al-4V: Microstructure evolution and material properties
Juliana S. Solheid et al.
JOURNAL OF LASER APPLICATIONS (2020)
Simulation and experimental analysis of abrasive fluidized bed machining process
Taekyoung Kim et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2020)
Gold-Silver Electroless Plating on Laser Powder-Bed Fusion Additively Printed AlSi10Mg Parts
Alexandra Inberg et al.
METALS (2020)
On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review
Peirong Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Structural integrity of additively manufactured stainless steel with cold sprayed barrier coating under combined cyclic loading
Davoud M. Jafarlou et al.
ADDITIVE MANUFACTURING (2020)
Design and analysis of additive manufactured bimodal structures obtained by cold spray deposition
Sara Bagherifard et al.
ADDITIVE MANUFACTURING (2020)
Synergistic effects in hydrodynamic cavitation abrasive finishing for internal surface-finish enhancement of additive-manufactured components
Arun Prasanth Nagalingam et al.
ADDITIVE MANUFACTURING (2020)
Deep Boltzmann machine for corrosion classification using eddy current pulsed thermography
Yuming Chen et al.
OPTIK (2020)
Cavitation-based soft abrasive flow processing method
Ye Pan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Current status and future directions of fused filament fabrication
Sunpreet Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Prediction and compensation of material removal for abrasive flow machining of additively manufactured metal components
C. W. Kum et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Present status and future prospects of plasma sprayed multilayered thermal barrier coating systems
P. G. Lashmi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Modeling the temperature profile of an extrudate in material extrusion additive manufacturing
Cheng Luo
MATERIALS LETTERS (2020)
Model of surface roughness and material removal using abrasive flow machining of selective laser melted channels
Julian Ferchow et al.
RAPID PROTOTYPING JOURNAL (2020)
Fabrication and characterization of novel layered materials produced by electroless plating and hot pressing
Onur Guler et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
A comprehensive review of the methods and mechanisms for powder feedstock handling in directed energy deposition
Ambrish Singh et al.
ADDITIVE MANUFACTURING (2020)
Effect of Al2O3 content and milling time on the properties of silver coated Cu matrix composites fabricated by electroless plating and hot pressing
Onur Guler et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Surface Roughness Investigation of Poly-Jet 3D Printing
Nectarios Vidakis et al.
MATHEMATICS (2020)
Enhancement of electrical conductivity and corrosion resistance by silver shell-copper core coating of additively manufactured AlSi10Mg alloy
Timo Rautio et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Surface finishing of additively manufactured Inconel 625 complex internal channels: A case study using a multi-jet hydrodynamic approach
Arun Prasanth Nagalingam et al.
ADDITIVE MANUFACTURING (2020)
Surface roughness profile and its effect on coating adhesion and corrosion protection: A review
S. G. Croll
PROGRESS IN ORGANIC COATINGS (2020)
Effect of process parameters on surface texture generated by laser polishing of additively manufactured Ti-6Al-4V
J. S. Solheid et al.
LASER-BASED MICRO- AND NANOPROCESSING XIV (2020)
Recent developments in abrasive flow finishing process: A review of current research and future prospects
Jaikishan Sambharia et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)
The influence of chemical polishing of titanium scaffolds on their mechanical strength and in-vitro cell response
Bartlomiej Wysocki et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Novel rotating-vibrating magnetic abrasive polishing method for double layered internal surface finishing
Jiang Guo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Influence of boundary masks on dimensions and surface roughness using segmented exposure in ceramic 3D printing
Xiangquan Wu et al.
CERAMICS INTERNATIONAL (2019)
Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling
Bintao Wu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Advanced brass-based composites via cold-spray additive-manufacturing and its potential in component repairing
C. J. Huang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Process Understanding of Plasma Electrolytic Polishing through Multiphysics Simulation and Inline Metrology
Igor Danilov et al.
MICROMACHINES (2019)
Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds
Alexander Kopp et al.
ACTA BIOMATERIALIA (2019)
Fundamental aspects and recent developments in electropolishing
Wei Han et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Microwave synthesized complex concentrated alloy coatings: Plausible solution to cavitation induced erosion-corrosion
Rakesh B. Nair et al.
ULTRASONICS SONOCHEMISTRY (2019)
Fatigue life and microstructure of additive manufactured Ti6Al4V after different finishing processes
L. Denti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Pressure dependence of age-hardenability of aluminum cast alloys and coarsening of precipitates during hot isostatic pressing
S. Hafenstein et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
'Cold spray plus ' as a new hybrid additive manufacturing technology: a literature review
Wenya Li et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting
Amal Charles et al.
APPLIED SCIENCES-BASEL (2019)
Investigation of electrochemical post-processing procedure for Ti-6Al-4V lattice structure manufactured by direct metal laser sintering (DMLS)
Guoying Dong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment
P. D. Nezhadfar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
Wenhui Yu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Surface Roughness Characterisation and Analysis of the Electron Beam Melting (EBM) Process
Manuela Galati et al.
MATERIALS (2019)
An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants
Xingting Han et al.
JOURNAL OF CLINICAL MEDICINE (2019)
Effect of process parameters and electropolishing on the surface roughness of interior channels in additively manufactured nickel-titanium shape memory alloy actuators
Jacob Mingear et al.
ADDITIVE MANUFACTURING (2019)
On microstructure and corrosion behaviour of AlSi10Mg alloy with low surface roughness fabricated by direct metal laser sintering
P. Fathi et al.
CORROSION SCIENCE (2019)
Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
POLYMERS (2019)
Pore Closure Effect of Laser Shock Peening of Additively Manufactured AlSi10Mg
Anton du Plessis et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2019)
Evaluation of surface integrity after high energy machining with EDM, laser beam machining and abrasive water jet machining of alloy 718
Jonas Holmberg et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Reducing surface roughness by chemical polishing of additively manufactured 3D printed 316 stainless steel components
Pawan Tyagi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Electrochemical polishing of selective laser melted Inconel 718
Srishti Jain et al.
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)
Fluidised Bed Machining of Metal Additive Manufactured Parts
A. El Hassanin et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Characterization of chemical surface finishing with cold acetone vapours on ABS parts fabricated by FDM
Alessandro Colpani et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2019)
Review of Wire Arc Additive Manufacturing for 3D Metal Printing
Johnnie Liew Zhong Li et al.
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY (2019)
Chemical surface finishing of AlSi10Mg components made by additive manufacturing
Fabio Scherillo
MANUFACTURING LETTERS (2019)
High-Speed 3D Printing of Millimeter-Size Customized Aspheric Imaging Lenses with Sub 7 nm Surface Roughness
Xiangfan Chen et al.
ADVANCED MATERIALS (2018)
Modification of surface morphology to enhance tribological properties for CVD coated cutting tools through wet micro-blasting post-process
Canyu Liu et al.
CERAMICS INTERNATIONAL (2018)
A critical review of past research and advances in abrasive flow finishing process
Anand C. Petare et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing
Jun Xiong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing
Neda Mohammadian et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Laser polishing of additive manufactured CoCr alloy components with complex surface geometry
K. C. Yung et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Role of crystallographic orientation and grain boundaries in fatigue crack propagation in used pearlitic rail steel
Mohammad Masoumi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Syed A. M. Tofail et al.
MATERIALS TODAY (2018)
Fundamental study of the bulge structure generated in laser polishing process
Chen Chen et al.
OPTICS AND LASERS IN ENGINEERING (2018)
Dry fractionation of olive pomace as a sustainable process to produce fillers for biocomposites
Sarah Lammi et al.
POWDER TECHNOLOGY (2018)
Topography of as built surfaces generated in metal additive manufacturing: A multi scale analysis from form to roughness
F. Cabanettes et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Effects of conventional, severe, over, and re-shot peening processes on the fatigue behavior of mild carbon steel
Erfan Maleki et al.
SURFACE & COATINGS TECHNOLOGY (2018)
On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing
Sara Bagherifard et al.
MATERIALS & DESIGN (2018)
Determination of Surface Roughness in Wire and Arc Additive Manufacturing Based on Laser Vision Sensing
Jun Xiong et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2018)
Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
Hiroshige Masuo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718
Arun Ramanathan Balachandramurthi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Controlled hydrodynamic cavitation erosion with abrasive particles for internal surface modification of additive manufactured components
Arun Prasanth Nagalingam et al.
WEAR (2018)
Optimization to the parameters of abrasive flow machining by Taguchi method
Ravi Butola et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Recent advances and challenges of abrasive jet machining
Ruslan Melentiev et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2018)
On morphological surface features of the parts printed by selective laser melting (SLM)
Milad Hamidi Nasab et al.
ADDITIVE MANUFACTURING (2018)
Cold spray additive manufacturing and repair: Fundamentals and applications
Shuo Yin et al.
ADDITIVE MANUFACTURING (2018)
A survey of finite element analysis of temperature and thermal stress fields in powder bed fusion Additive Manufacturing
Zhibo Luo et al.
ADDITIVE MANUFACTURING (2018)
Fluidized bed abrasive jet machining (FB-AJM) of K-99 alumina ceramic using SiC abrasives
B. K. Nanda et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion
V. Urlea et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts
S. Bagehorn et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Damage-free finishing of CVD-SiC by a combination of dry plasma etching and plasma-assisted polishing
Hui Deng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components
V. Urlea et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Distinguishing effect of buffing vs. grinding, milling and turning operations on the chloride induced SCC susceptibility of 304L austenitic stainless steel
Pandu Sunil Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
Stephane Gorsse et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing
K. L. Tan et al.
WEAR (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review
Sunil Pathak et al.
COATINGS (2017)
Discharge current effect on machining characteristics and mechanical properties of aluminum alloy 6061 workpiece produced by electric discharging machining process
Chin-Guo Kuo et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
An improved prediction of residual stresses and distortion in additive manufacturing
T. Mukherjee et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting
Yang Tian et al.
ADDITIVE MANUFACTURING (2017)
Modification using magnetic field-assisted finishing of the surface roughness and residual stress of additively manufactured components
Hitomi Yamaguchi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Hybrid Abrasive Flow Machining for Nano Finishing - A Review
Parvesh Ali et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Effects of Processing Parameters on Surface Roughness of Additive Manufactured Ti-6Al-4V via Electron Beam Melting
Pan Wang et al.
MATERIALS (2017)
Flow structure identification and analysis in fin arrays produced by cold spray additive manufacturing
Philippe Dupuis et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Selective Laser Melting Additive Manufacturing of Hard-to-Process Tungsten-Based Alloy Parts With Novel Crystalline Growth Morphology and Enhanced Performance
Dongdong Gu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
A Study of Build Edge Profile for Prediction of Surface Roughness in Fused Deposition Modeling
Mohammad Taufik et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Wire plus Arc Additive Manufacturing
S. W. Williams et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process
Han Chen et al.
RAPID PROTOTYPING JOURNAL (2016)
Development of rapid tooling using fused deposition modeling: a review
Kamaljit Singh Boparai et al.
RAPID PROTOTYPING JOURNAL (2016)
Enhancing surface finish of additively manufactured titanium and cobalt chrome elements using laser based finishing
Wojciech S. Gora et al.
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)
Electrochemical-aided abrasive flow machining (ECA2FM) process: a hybrid machining process
B. S. Brar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Tailoring surface quality through mass and momentum transfer modeling using a volume of fluid method in selective laser melting of TiC/AlSi10Mg powder
Donghua Dai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
Seyed Farid Seyed Shirazi et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)
Mechanical properties of parts fabricated with inkjet 3D printing through efficient experimental design
J. Mueller et al.
MATERIALS & DESIGN (2015)
PolyJet technology for product prototyping: Tensile strength and surface roughness properties
Aitor Cazon et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Additive manufacturing of alumina parts by indirect selective laser sintering and post processing
Khuram Shahzad et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Surface roughness analysis, modelling and prediction in selective laser melting
Giovanni Strano et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Characterization and evaluation of a PMMA-based 3D printing process
Christian Polzin et al.
RAPID PROTOTYPING JOURNAL (2013)
Rapid manufacturing of metallic objects
K. P. Karunakaran et al.
RAPID PROTOTYPING JOURNAL (2012)
Effect of process parameters settings and thickness on surface roughness of EBM produced Ti-6Al-4V
A. Safdar et al.
RAPID PROTOTYPING JOURNAL (2012)
Continuous digital light processing (cDLP): Highly accurate additive manufacturing of tissue engineered bone scaffolds This paper highlights the main issues regarding the application of Continuous Digital Light Processing (cDLP) for the production of highly accurate PPF scaffolds with layers as thin as 60 μm for bone tissue engineering
David Dean et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2012)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Production and corrosion behaviours of the Al-12Si-XMg alloys containing in situ Mg2Si particles
H. Ahlatci
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
Dongdong Gu et al.
MATERIALS & DESIGN (2009)
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Kamran Mumtaz et al.
RAPID PROTOTYPING JOURNAL (2009)
A randomized and controlled Phase 1 study of the safety and immunogenicity of the AMA1-C1/Alhydrogel® + CPG 7909 vaccine for Plasmodium falciparum malaria in semi-immune Malian adults
Issaka Sagara et al.
VACCINE (2009)
Polymer based organic solar cells using ink-jet printed active layers
T. Aernouts et al.
APPLIED PHYSICS LETTERS (2008)
Statistical modelling and optimization of surface roughness in the selective laser sintering process
P. B. Bacchewar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2007)
Abrasive flow machining with additional centrifugal force applied to the media
R. S. Walia et al.
MACHINING SCIENCE AND TECHNOLOGY (2006)
Balling processes during selective laser treatment of powders
NK Tolochko et al.
RAPID PROTOTYPING JOURNAL (2004)
Stereolithography of structural complex ceramic parts
T Chartier et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts
MW Khaing et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)