☆ 4.1 Editorial Material

Nonfullerene acceptors based on perylene monoimides

JOURNAL OF SEMICONDUCTORS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

Xiaopeng Xu et al.

Summary: By utilizing a sequential solution processing method, a more suitable IHJ nanostructure for organic solar cells has been achieved, leading to an increased power conversion efficiency. The IHJ structure, compared to the BHJ structure, can efficiently dissociate excitons, reduce charge recombination, and facilitate the transport of free electrons and holes through more straightforward pathways, ultimately enhancing performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Wide-bandgap organic solar cells with a novel perylene-based non-fullerene acceptor enabling open-circuit voltages beyond 1.4 V

Jakob Hofinger et al.

Summary: A perylene-based acceptor was developed for organic solar cells, showing high open-circuit voltage and significant non-radiative voltage losses. However, measurements of electroluminescence quantum yield contradict the voltage loss analysis results, suggesting caution in interpreting non-radiative voltage losses in OPV systems.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Multidisciplinary

The Molecular Ordering and Double-Channel Carrier Generation of Nonfullerene Photovoltaics within Multi-Length-Scale Morphology

Jinqiu Xu et al.

Summary: The success of NFA solar cells depends not only on extended absorption and suitable energy levels, but also on the unique physical properties of the nonfullerene acceptors. This study investigates the morphology and photophysical behavior of PBDB-T donor blended with various acceptors, demonstrating the importance of molecular assembly and photophysics in the efficiency of carrier formation. The new carrier generation mechanism and multi-length-scale morphology in blended films hold promising potential for fundamental advantages in NFA solar cells.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Phenylene-Bridged Perylene Monoimides as Acceptors for Organic Solar Cells: A Study on the Structure-Property Relationship

Bettina Schweda et al.

Summary: A series of non-fullerene acceptors based on perylene monoimides coupled in the peri position through phenylene linkers were synthesized and their properties were investigated using theoretical calculations and experimental data. The stacking behavior of acceptor thin films was studied by grazing incidence wide angle X-ray scattering. The results showed correlations between the electrochemical and morphological properties and the photovoltaic performance of devices.

CHEMISTRY-A EUROPEAN JOURNAL (2022)

Add to Collection

Editorial Material Physics, Condensed Matter

The origin and evolution of Y6 structure

Jiamin Cao et al.

JOURNAL OF SEMICONDUCTORS (2022)

Add to Collection

Editorial Material Physics, Condensed Matter

∼1.2 V open-circuit voltage from organic solar cells

Ailing Tang et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Physics, Condensed Matter

18.69% PCE from organic solar cells

Ke Jin et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Review Chemistry, Physical

Low-Bandgap Non-fullerene Acceptors Enabling High-Performance Organic Solar Cells

Wei Liu et al.

Summary: Recent advancements in organic solar cells have been achieved with the introduction of non-fullerene acceptors (NFAs), which offer a wide absorption range and easily tunable energy levels. Efficient OSCs rely on good donor-acceptor compatibility, morphological control, and device engineering. Researchers have summarized design and synthesis strategies for NFAs, as well as proposed innovative solutions for material and device engineering to advance the development and applications of OSCs.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A New Conjugated Polymer that Enables the Integration of Photovoltaic and Light-Emitting Functions in One Device

Ye Xu et al.

Summary: This study demonstrates the design and application of a new wide-bandgap polymer, PBQx-TCl, in photovoltaic and light-emitting devices. Devices fabricated with nonfullerene acceptors show high power conversion efficiency under various lighting conditions, showcasing the potential of PBQx-TCl-based devices in both photovoltaic and light-emitting functions.

ADVANCED MATERIALS (2021)

Add to Collection

Review Physics, Condensed Matter

Recent advances and prospects of asymmetric non-fullerene small molecule acceptors for polymer solar cells

Liu Ye et al.

Summary: Replacing symmetric small molecule acceptors with asymmetric small molecules in the photoactive layer is a strategy to improve the performance of polymer solar cells. The asymmetric design of the molecule benefits exciton dissociation and charge transport, as well as fine-tuning the molecular energy level to adjust the open-circuit voltage further.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Physics, Condensed Matter

Side chain engineering on D18 polymers yields 18.74% power conversion efficiency

Xianyi Meng et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Regioregular Narrow-Bandgap n-Type Polymers with High Electron Mobility Enabling Highly Efficient All-Polymer Solar Cells

Huiliang Sun et al.

Summary: The study successfully improved the efficiency of all-polymer solar cells by synthesizing narrow-bandgap polymer acceptors with regular structures. By introducing a ternary system with different components, further optimization of blend morphology and charge transport was achieved, leading to an enhanced power conversion efficiency.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Physics, Condensed Matter

D18, an eximious solar polymer!

Ke Jin et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Physics, Condensed Matter

A chlorinated copolymer donor demonstrates a 18.13% power conversion efficiency

Jianqiang Qin et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

Add to Collection

Editorial Material Multidisciplinary Sciences

Highlight The new era for organic solar cells: non-fullerene small molecular acceptors

Chunhui Duan et al.

SCIENCE BULLETIN (2020)

Add to Collection

Article Chemistry, Physical

New Phase for Organic Solar Cell Research: Emergence of Y-Series Electron Acceptors and Their Perspectives

Shuixing Li et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Concurrent improvement inJSCandVOCin high-efficiency ternary organic solar cells enabled by a red-absorbing small-molecule acceptor with a high LUMO level

Tao Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Nonfullerene Polymer Solar Cells based on a Perylene Monoimide Acceptor with a High Open-Circuit Voltage of 1.3 V

Youdi Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Fluorene-centered perylene monoimides as potential non-fullerene acceptor in organic solar cells

Youdi Zhang et al.

ORGANIC ELECTRONICS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Perylene Imides for Organic Photovoltaics: Yesterday, Today, and Tomorrow

Chen Li et al.

ADVANCED MATERIALS (2012)

Add to Collection

Article Chemistry, Physical

Nonplanar Perylene Diimides as Potential Alternatives to Fullerenes in Organic Solar Cells

Sridhar Rajaram et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

High-Yield Synthesis and Electrochemical and Photovoltaic Properties of Indene-C70 Bisadduct

Youjun He et al.

ADVANCED FUNCTIONAL MATERIALS (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Indene-C60 Bisadduct: A New Acceptor for High-Performance Polymer Solar Cells

Youjun He et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.