4.7 Article

Synergistically enhanced thermal control ability and mechanical properties of natural rubber for tires through a graphene/silica with a dot-face structure

Related references

Note: Only part of the references are listed.
Review Nanoscience & Nanotechnology

A mini review on factors affecting network in thermally enhanced polymer composites: filler content, shape, size, and tailoring methods

Xiaoxiang He et al.

Summary: The thermal conductivity of polymer composites is greatly affected by the types, sizes, and shapes of fillers in the filler network, and there are ongoing advancements in approaches to tailor the filler networks.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Precise regulation of weakly negative permittivity in CaCu3Ti4O12 metacomposites by synergistic effects of carbon nanotubes and grapheme

Han Wu et al.

Summary: The study successfully achieved negative permittivity by preparing ternary percolation nanocomposites, investigating the synergy between graphene and carbon nanotubes, and controlling the formation of conductive paths to regulate negative permittivity precisely.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Broadband radar-absorbing performance of square-hole structure

Wen Wang et al.

Summary: This paper introduces a radar-absorbing material with a square pore structure prepared by 3D printing and coating dipping methods, and conducts a gradient optimization design of sheet resistance for the structure, showing that gradient design can improve radar-absorbing performance.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Synthesis, curing mechanism, thermal stability, and surface properties of fluorinated polybenzoxazines for coating applications

Xiaotian Fan et al.

Summary: The influence of different positions of fluorine atoms on the curing mechanism, thermal stability, and surface properties of fluorinated benzoxazines was studied. The curing peak temperature of fluorine-substituted benzoxazines showed a specific order, and thermal stability and hydrophobicity also exhibited distinct trends. Moreover, coatings based on fluorinated polybenzoxazines displayed excellent mechanical and anti-corrosion properties, providing new options for coatings and composites with a deep understanding of their structure-performance relationship.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Ice template method assists in obtaining carbonized cellulose/boron nitride aerogel with 3D spatial network structure to enhance the thermal conductivity and flame retardancy of epoxy-based composites

Duo Pan et al.

Summary: A novel epoxy-based composite with significantly enhanced thermal conductivity and good flame retardancy properties was successfully fabricated by constructing a 3D carbonized cellulose/boric acid boron nitride aerogel network and infiltrating it with an epoxy matrix. This composite material shows great potential as next-generation thermal dissipating material for electronic devices.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Copper nanoparticle-deposited graphite sheets for highly thermally conductive polymer composites with reduced interfacial thermal resistance

Fei Xu et al.

Summary: The thermal conductivity is improved through thermally conductive Cu bridges between modified graphite and the improved compatibility between graphite and epoxy, resulting in enhanced heat transfer performance of the composites.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Nanoscience & Nanotechnology

Interphase layer characteristics and thermal conductivity of hot-forged Cu-B/diamond composites

L. Lei et al.

Summary: Copper/diamond composites fabricated using a cost-effective hot forging process show different morphology and thermal conductivity due to the influence of diamond facets on B4C nucleation, highlighting the potential for future high-power electronic devices.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Polymer Science

How the Aggregates Determine Bound Rubber Models in Silicone Rubber? A Contrast Matching Neutron Scattering Study

Li-Zhao Huang et al.

Summary: The correlation between aggregates and bound rubber structures in silicone rubbers with various silica fractions has been investigated. It was found that there is a critical threshold of silica fraction between 10 and 30 phr, which determines whether isolated aggregates dominate or some rubber fraction is trapped among the agglomerate. Additionally, the study revealed that bound rubber formation is determined by inherent properties of the components and there exists a bicontinuous bound rubber structure with characteristic lengths in certain samples.

CHINESE JOURNAL OF POLYMER SCIENCE (2021)

Article Nanoscience & Nanotechnology

Facile synthesis of photoluminescent mesoporous silica

Yanxian Zeng et al.

Summary: Photoluminescent mesoporous silica with high surface area and pore diameter was successfully synthesized using a co-templating method, with the photoluminescence originating from the trapped carbon in the co-templates.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Adsorption of xanthate from aqueous solution by multilayer graphene oxide: an experimental and molecular dynamics simulation study

Lin Li et al.

Summary: The research characterized MGO using Raman spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy (XPS), showing that MGO has good adsorption performance and can successfully remove xanthates. The results also indicated a decrease in oxygen content on the MGO surface after xanthate adsorption, as well as a significantly lower proportion of oxygen-containing functional groups, with the adsorption process following the Langmuir model.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Aluminum dihydric tripolyphosphate/polypyrrole-functionalized graphene oxide waterborne epoxy composite coatings for impermeability and corrosion protection performance of metals

Qingsong Zhu et al.

Summary: The synthesis of ADTP-GO-PPy hybrids and their application in waterborne epoxy coatings can significantly enhance the dispersion ability, leading to improved corrosion resistance of mild steel.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Materials Science, Composites

Facile strategies for green tire tread with enhanced filler-matrix interfacial interactions and dynamic mechanical properties

Xinping Zhang et al.

Summary: Effective and facile strategies involving macromolecular functionalization and cross-linkable crystalline component incorporation have been proposed to fabricate tire composite materials with balanced integrated performances in this study. The introduction of cross-linkable crystalline component led to complex phase morphology and enhanced filler dispersion in the rubber blends, resulting in excellent integrated properties of the rubber composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Lightweight Fe3C@Fe/C nanocomposites derived from wasted cornstalks with high-efficiency microwave absorption and ultrathin thickness

Guangyu Qi et al.

Summary: Carbon materials have great potential in producing microwave absorbers, with Fe3C@Fe/C composites obtained from wasted cornstalks showing excellent absorption capabilities. The credit for this lies in the impedance matching and attenuation properties of the composites, as well as the synergistic influence of dielectric and magnetic losses in the porous microstructure. A low-cost method using agricultural waste is proposed to reduce pollution caused by burning cornstalks.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

A highly stretchable natural rubber/buckypaper/natural rubber (NR/N-BP/NR) sandwich strain sensor with ultrahigh sensitivity

Mingshuai Fan et al.

Summary: A novel natural rubber-buckypaper was prepared and used to construct a sandwich strain sensor with high sensitivity, fast response time, wide sensing range, and excellent stability. This sensor showed promising applications in wearable electronics with the ability to accurately capture human body movements and distinguish different English word pronunciations.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Materials Science, Composites

Adjusting silica/rubber interfacial interactions and properties via the click reactions between liquid polybutadiene and silane

Song Pang et al.

Summary: The study adjusted the interface interactions of silica/natural rubber through thiol-ene click reactions, achieving excellent silica dispersion and positioning. The TS2-NR composite exhibited the best static and dynamic properties, mainly due to the synergistic effects of TTPB and Si747.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Study on Favorable Comprehensive Properties of Superhydrophobic Coating Fabricated by Polytetrafluoroethylene Doped with Graphene

Wanfu Shao et al.

Summary: The novel water-based superhydrophobic coating prepared using PTFE doped with graphene showed excellent comprehensive properties, including good superhydrophobicity and anti-corrosion ability. The coating achieved a water static contact angle of 153 degrees under optimized process conditions, and maintained high contact angles even after multiple wear and water impact tests.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Preparation and performance of fumed silica-stabilized epoxy resin pickering emulsion for basalt fiber-sizing agents

Zhongwu Chen et al.

Summary: This study utilized fumed silica modified by trace amounts of CTAC to stabilize epoxy resin emulsions for basalt fiber sizing agents, achieving stable emulsions and significant performance enhancements.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption

Peitao Xie et al.

Summary: This study prepared Co/C nanocomposites with Co nanoparticles uniformly distributed in amorphous carbon sheets, achieving excellent absorption performance through hierarchical porous microstructures. Excellent absorption performance was achieved at 10% and 15% Co/C content levels, providing a new pathway for designing ultralight absorbers.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Materials Science, Composites

Reinforcement and Payne effect of hydrophobic silica filled natural rubber nanocomposites

Huilong Xu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Article Biochemistry & Molecular Biology

Self-assembled lignin-silica hybrid material derived from rice husks as the sustainable reinforcing fillers for natural rubber

Beichen Xue et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Review Nanoscience & Nanotechnology

Graphene research and their outputs: Status and prospect

Santosh K. Tiwari et al.

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2020)

Article Engineering, Mechanical

Fatigue damage investigation of ultra-large tire components

Wedam Nyaaba et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Review Engineering, Multidisciplinary

Enhanced comprehensive performance of SSBR/BR with self-assembly reduced graphene oxide/silica nanocomposites

Hong Zhu et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Engineering, Mechanical

Fatigue of natural rubber under different temperatures

B. Ruellan et al.

INTERNATIONAL JOURNAL OF FATIGUE (2019)

Article Materials Science, Composites

Elastomer nanocomposites with superior dynamic mechanical properties via trans-1, 4-poly(butadiene-co-isoprene) incorporation

Xinping Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Article Thermodynamics

Analytical study on thermal conductivity enhancement of hybrid-filler polymer composites under high thermal contact resistance

Ich Long Ngo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Polymer Science

Payne effect of silica-filled styrene-butadiene rubber

Ruiquan Yang et al.

POLYMER (2017)

Article Materials Science, Composites

Novel functional silica nanoparticles for rubber vulcanization and reinforcement

Lijuan Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Article Engineering, Multidisciplinary

Fabrication of graphene/natural rubber nanocomposites with high dynamic properties through convenient mechanical mixing

Hailan Kang et al.

COMPOSITES PART B-ENGINEERING (2017)

Review Chemistry, Multidisciplinary

Graphene in Photocatalysis: A Review

Xin Li et al.

SMALL (2016)

Review Chemistry, Physical

Graphene/elastomer nanocomposites

Dimitrios G. Papageorgiou et al.

CARBON (2015)

Article Polymer Science

SILICA-REINFORCED EPDXIDIZED NATURAL RUBBER TIRE TREADS - PERFORMANCE AND DURABILITY

Pamela J. Martin et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2015)

Article Engineering, Multidisciplinary

Numerical evaluation of the temperature field of steady-state rolling tires

Tian Tang et al.

APPLIED MATHEMATICAL MODELLING (2014)

Article Engineering, Mechanical

Description of fatigue damage in carbon black filled natural rubber

J. -B. Le Cam et al.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2008)