4.7 Article

Mechanical properties of affordable and sustainable ultra-high-performance concrete

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Effect of ferrosilicon and silica fume on mechanical, durability, and microstructure characteristics of ultra high-performance concrete

Mohamed Amin et al.

Summary: This study introduces a new material, ferrosilicon slag, as a partial substitute for cement in ultra high-performance concrete (UHPC), with microparticles having a surface area of 12,850 (cm2/gm). Results show that increasing the replacement rates of ferrosilicon slag and silica fume by up to 25% can significantly enhance the compressive strength and transport properties of UHPC. This material also has an impact on the fresh concrete properties and mechanical properties of UHPC.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Engineering, Civil

Characteristics of sustainable high strength concrete incorporating eco-friendly materials

Ahmed M. Tahwia et al.

Summary: This research investigated the effects of silica fume, rice husk ash, and blast furnace slag powder as supplementary cementitious materials on the properties of sustainable high strength concrete. Results showed that silica fume exhibited higher pozzolanic activity, while mixtures with blast furnace slag powder showed better consistency. Optimum levels for partial replacement of cement by silica fume and rice husk ash were found to be 15% and 10%, respectively, with resulting higher compressive strength and mechanical properties compared to control concrete. Utilizing eco-friendly materials as supplementary cementitious materials can lead to economic and environmental benefits in the context of sustainable development.

INNOVATIVE INFRASTRUCTURE SOLUTIONS (2022)

Article Construction & Building Technology

Effects of nano cotton stalk and palm leaf ashes on ultrahigh-performance concrete properties incorporating recycled concrete aggregates

Mohamed Amin et al.

Summary: The study investigated the effects of using NCSA and PLA as partial replacements for cement in UHPC, finding that substitutions with NCSA and PLA achieved the highest compressive strengths at 90 days and that a mixture of 20% PLA and 5% NCSA showed the highest values of splitting tensile strength, flexural strength, and elastic modulus.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Durability and microstructure of eco-efficient ultra-high-performance concrete

Ahmed M. Tahwia et al.

Summary: The study found that using fly ash (FA) as a high percentage replacement for cement has a positive effect on enhancing the performance of UHPC, with higher compressive strength and modulus of elasticity. However, for the use of CEM III or GBFS, the attack period, sulfate concentration, or replacement percentage need to be reduced to maintain the ultra-high performance of the concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Chemistry, Multidisciplinary

Investigation of Mechanical Properties, Durability and Microstructure of Low-Clinker High-Performance Concretes Incorporating Ground Granulated Blast Furnace Slag, Siliceous Fly Ash and Silica Fume

Katarzyna Konieczna et al.

Summary: The study designed three low-clinker high-performance concrete mixtures, showing that these concretes can achieve compressive strength of 76-92 MPa after 28 days of curing, with high modulus of elasticity and increased resistance to freeze-thaw and water penetration under pressure.

APPLIED SCIENCES-BASEL (2021)

Article Construction & Building Technology

The effect of steam curing regimes on the chloride resistance and pore size of high-strength green concrete

Abdullah M. Zeyad et al.

Summary: This study investigated the effect of steam curing regimes (SCRs) on high-strength green concrete (HSGC) incorporating ultrafine palm oil fuel ash (U-POFA) as a partial substitute for cement. The results showed that using a high volume of U-POFA in HSGC led to improved compressive strength, chloride resistance, and microstructure properties at different ages, with the enhancement being influenced by U-POFA replacement rates, temperature, and steam curing period.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

The effect of using nano rice husk ash of different burning degrees on ultra-high-performance concrete properties

A. Serag Faried et al.

Summary: This study investigated the effect of seven different types of nano rice husk ash (NRHA) on the performance of ultra-high-performance concrete (UHPC). The results showed that the addition of NRHA can enhance the compressive strength and impermeability of UHPC.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Engineering properties of self-cured normal and high strength concrete produced using polyethylene glycol and porous ceramic waste as coarse aggregate

Mohamed Amin et al.

Summary: This study explores the impact of curing regimes for SC on NSC and HSC, as well as the effect of high temperatures on SC concrete. The study suggests three self-curing regimes based on compressive strength, durability, and performance under high temperatures. The combination of 2% PEG and 10% PCWA achieved the highest compressive strength, while a 3% PEG dose showed optimal durability properties. Coarse aggregate replacement with PCWA up to 25% helped mitigate the negative effects of high temperatures on concrete properties.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

ECO-UHPC with High-Volume Class-F Fly Ash: New Insight into Mechanical and Durability Properties

Tanvir Ahmed et al.

Summary: This study investigates the effects of high-volume cement replacement by Class-F fly ash on the mechanical, durability, and microstructure properties of UHPC. Environmentally friendly-UHPC mixes have been synthesized with CO2 footprint intensities of less than 5 kg/m(3)/MPa. Results suggest that concretes with ultrahigh strength and excellent durability properties can be prepared with up to 70% cement replacement by Class-F fly ash.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

Article Construction & Building Technology

Mechanical performance of affordable and eco-efficient ultra-high performance concrete (UHPC) containing recycled tyre steel fibres

M. N. Isa et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature

Hani Alanazi et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Recycled ceramic waste high strength concrete containing wollastonite particles and micro-silica: A comprehensive experimental study

Seyed Alireza Zareei et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Green & Sustainable Science & Technology

Design and preparation of ultra-high performance concrete with low environmental impact

Ye Shi et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Mechanics

X-ray computed tomography images based phase-field modeling of mesoscopic failure in concrete

Zhen-Jun Yang et al.

ENGINEERING FRACTURE MECHANICS (2019)

Article Green & Sustainable Science & Technology

Efficiency of rice husk ash and fly ash as reactivity materials in sustainable concrete

Mohamed Amin et al.

SUSTAINABLE ENVIRONMENT RESEARCH (2019)

Article Construction & Building Technology

Mechanical and microstructural characterization of fiber reinforced fly ash based geopolymer composites

Mukhallad M. Al-mashhadani et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Effects of autoclave curing and fly ash on mechanical properties of ultra-high performance concrete

Tiefeng Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Effect of slag cement on the properties of ultra-high performance concrete

Zhichao Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Optimization and performance of cost-effective ultra-high performance concrete

Weina Meng et al.

MATERIALS AND STRUCTURES (2017)

Proceedings Paper Construction & Building Technology

Sustainability and durability analysis of reinforced concrete structures

A. Horakova et al.

FIBRE CONCRETE 2017 (2017)

Article Construction & Building Technology

Development of ultra-high performance concrete with locally available materials

Ali Alsalman et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Determination of optimized mix design and curing conditions of reactive powder concrete (RPC)

Davood Mostofinejad et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash

Musaad Zaheer Nazir Khan et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Ultra-High Performance Concrete: Mechanical Performance, Durability, Sustainability and Implementation Challenges

S. Abbas et al.

INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2016)

Article Construction & Building Technology

Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses

R. Yu et al.

CEMENT & CONCRETE COMPOSITES (2015)

Article Construction & Building Technology

Microstructure, hydration and nanomechanical properties of concrete containing metakaolin

Salim Barbhuiya et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Proceedings Paper Construction & Building Technology

Corrosion behaviours of high strength TMT steel bars for reinforcing cement concrete structures

Md. Aminul Islam

CIVIL ENGINEERING INNOVATION FOR A SUSTAINABLE (2015)

Article Construction & Building Technology

Influence of fiber reinforcement on strength and toughness of all-lightweight concrete

Jisun Choi et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete

Ping Duan et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Preparation of Ultra-High Performance Concrete with common technology and materials

Chong Wang et al.

CEMENT & CONCRETE COMPOSITES (2012)

Article Construction & Building Technology

Combined effects of fly ash and waste ferrochromium on properties of concrete

Osman Gencel et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Nuclear Science & Technology

Tensile strength of concrete under static and intermediate strain rates: Correlated results from different testing methods

Shengxing Wu et al.

NUCLEAR ENGINEERING AND DESIGN (2012)

Article Construction & Building Technology

Influence of calcined kaolin on mortar properties

Mohamed Said-Mansour et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Engineering, Multidisciplinary

An experimental study on the tensile strength of steel fiber reinforced concrete

R. S. Olivito et al.

COMPOSITES PART B-ENGINEERING (2010)

Article Construction & Building Technology

The nano-mechanical signature of Ultra High Performance Concrete by statistical nanoindentation techniques

Luca Sorelli et al.

CEMENT AND CONCRETE RESEARCH (2008)

Article Engineering, Civil

Sustainability of Concrete Construction

Tarun R. Naik

PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION (2008)

Article Construction & Building Technology

Strength properties and durability aspects of high strength concrete using Korean metakaolin

Hong-Sam Kim et al.

CONSTRUCTION AND BUILDING MATERIALS (2007)

Article Materials Science, Multidisciplinary

The nanogranular nature of C-S-H

Georgios Constantinides et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2007)

Article Construction & Building Technology

Effect of silica fume on mechanical properties of high-strength concrete

M Mazloom et al.

CEMENT & CONCRETE COMPOSITES (2004)