☆ 4.7 Review

Recycling of mine tailings for the geopolymers production: A systematic review

CASE STUDIES IN CONSTRUCTION MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Enzymatically induced phosphate precipitation (EIPP) for stabilization/solidification (S/S) treatment of heavy metal tailings

Li-Jun Han et al.

Summary: The study proposed a biological solidification and stabilization method using enzymatically induced phosphate precipitation to strengthen Pb-Zn tailings. Results showed that the EIPP-S/S method effectively reduced the leached concentration of lead in the tailings, mitigating environmental hazards.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Enhancing the thermal performance of Class F fly ash-based geopolymer by sodalite

K. M. Klima et al.

Summary: The addition of synthetic sodalite phase to Class F fly ash-based geopolymers significantly enhances high-temperature performance by inducing phase formation and reducing thermal shrinkage. The sodalite phases also lower the glass transition temperature and act as a skeletal reinforcement in the material.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

High-efficiency utilization of limestone tailings: Used as cementitious materials and fine aggregate to prepare karst structure filling material

Yansheng Wang et al.

Summary: Karst areas are susceptible to collapse due to hydrodynamic forces, hindering mineral resources exploitation, underground space development, and infrastructure construction. Cemented filling is an effective method to control karst collapse, with limestone tailings-based cementitious materials playing a key role. The study optimized the ratio of various materials and evaluated their impact on compressive strength, highlighting the importance of pore structure optimization for enhancing filling materials' performance.Utilization rate of limestone tailings in karst filling materials reached 87.5%-93.75%, showing efficient use of resources.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Effect of superplasticizer on rheology and thixotropy of superfine-tailings cemented paste backfill: Experiment and modelling

Zhenbang Guo et al.

Summary: This study focuses on the effect of superplasticizer on the rheological properties and thixotropic properties of superfine-tailings cemented paste backfill, and proposes an improved dynamic yield stress model. It is found that the addition of SP affects the characteristic time of destructuration, and shear stress can be divided into three stages under steady-state shearing. An exponential relationship is observed between the rheological parameters of SCPB and WFT.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Utilization of copper mine tailings as a partial substitute for cement in concrete construction

Ahad Barzegar Ghazi et al.

Summary: In this study, Sungun copper mine tailings were used as a partial substitute for cement in concrete construction, leading to increased compressive strength and chloride penetration resistance. Concrete samples with 10-50% and 60-70% mine tailings as a cement substitute exhibited a higher increase in compressive strength compared to the control sample.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Chemistry, Medicinal

Application of the dual-tail approach for the design and synthesis of novel Thiopyrimidine-Benzenesulfonamide hybrids as selective carbonic anhydrase inhibitors

Heba T. Abdel-Mohsen et al.

Summary: A novel series of carbonic anhydrase inhibitors showed high potency and selectivity, displaying significant antiproliferative activity against cancer cells and suggesting CA II inhibition as a potential alternative therapeutic target for cancer treatment.

EUROPEAN JOURNAL OF MEDICINAL CHEMISTRY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Copper recovery from tailings through bioleaching and further application of bioleached tailings residue: Comprehensive utilization of tailings

Wei Chen et al.

Summary: The study investigated the use of bioleaching for copper recovery from tailings and the application of bioleached tailings residue in making cemented tailing backfill materials. The results showed that adding tailings and bacteria at appropriate intervals during bioleaching process could improve copper recovery and bacteria concentration. The use of bioleached tailings residue in cemented tailings backfill showed better performances in terms of compressive strength and water-holding capacity. The study also identified the bacteria community structure and proposed a possible reaction mechanism for the performance of the cemented tailing backfill specimens. Furthermore, adding tailings and bacteria at appropriate intervals helped remove excessive hazardous ions from the bioleaching solution.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Engineering, Environmental

A novel scheme for the utilization of Cu slag flotation tailings in preparing internal electrolysis materials to degrade printing and dyeing wastewater

Qilin Zhai et al.

Summary: This study introduces an environmentally friendly technology to treat printing and dyeing wastewater using internal electrolysis materials (IEMs) prepared through the carbothermal reduction of Fe-rich Cu slag (IRCS). The improved degradation efficiency of methylene blue (MB) was achieved by promoting the conversion of fayalite to zero-valent iron (ZVI) and the formation of IEM with residual carbon. By adjusting the IEM dosage, reaction temperature, MB concentration, and solution pH, the degradation capacity of MB can be further enhanced.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Environmental Sciences

Environmental quality assessment in a marine coastal area impacted by mining tailing using a geochemical multi-index and physical approach

Cybelle Menolli Longhini et al.

Summary: The study assessed the environmental quality of a marine coastal area impacted by a mining disaster in Southeast Brazil using geochemical multi-index and physical approach. It found that the deterioration of environmental quality during dry periods was highly associated with the release of dissolved forms of metal(oids) into the water column due to low river discharge and high wave heights. Recovery of environmental quality occurred during wet periods.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Environmental Sciences

Impact of metallurgy tailings in a major European fluvial-estuarine system: Trajectories and resilience over seven decades

Jorg Schafer et al.

Summary: The study found that the multi-metal contamination in the Gironde Watershed needs appropriate management of tailings and contaminated sediments to prevent environmental quality impairment. Additionally, emerging metallic contaminants warrant further research to assess their potential impact on environmental quality.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Environmental Sciences

Fundao tailings dam failure in Brazil: Evidence of a population exposed to high levels of Al, As, Hg, and Ni after a human biomonitoring study

Ana Carolina Cavalheiro Paulelli et al.

Summary: The study conducted in communities directly affected by the disaster revealed high levels of exposure to toxic metals such as aluminum, arsenic, mercury, and nickel. Factors such as community, drinking water, fish and seafood consumption, and smoking habits were found to be associated with metal/metalloid levels in their body. Well and tap water intake were identified as important sources of exposure to aluminum and nickel. The findings represent health risks to the groups living in the areas affected by the tailings dam failure, calling for further studies to evaluate the potential health effects of high exposure to metals and remediation actions from public health Brazilian authorities.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Environmental Sciences

Do metals differentiate zooplankton communities in shallow and deep lakes affected by mining tailings? The case of the Fundao dam failure (Brazil)

Gleice de Souza Santos et al.

Summary: In lakes affected by mining tailings, shallow lakes showed higher vulnerability to exposure than deep lakes, with higher metal concentrations and lower zooplankton richness. Metals and limnological variables play a major role in shaping zooplankton distribution, highlighting the importance of considering these factors in conservation efforts.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Engineering, Environmental

Unravelling in-situ hardpan properties and functions in capping sulfidic Cu-Pb-Zn tailings and forming a duplex soil system cover

Tuan A. H. Nguyen et al.

Summary: The study highlights the potential of an in-situ hardpan-based duplex soil system as an unconventional approach to rehabilitate sulfidic Cu-Pb-Zn tailings by physically separating root zones and preventing capillary enrichment of acidity and soluble solutes into the root zones, sustaining native plant growth.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Development of normal and very high strength geopolymer binders based on concrete waste at ambient environment

O. Mahmoodi et al.

Summary: This study aims to optimize the composition of concrete waste-based geopolymer binders using a new algorithmic mix design method that relies on pre-targeting ratios of SiO2/Al2O3, Na2O/SiO2 and liquid/solid of precursor powder and alkaline reagents. The research also considers elevated temperature curing and the addition of supplementary cementitious materials to improve fresh and mechanical properties. Microstructural analysis shows that the degree of geopolymerization and related formations can be optimized at ambient conditions.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Construction & Building Technology

Properties, durability and cost efficiency of cement and hydrated lime mortars reusing copper mine tailings of Lefke-Xeros in Cyprus

Ceren Ince et al.

Summary: The study investigates the consequences of dewatering copper mine tailings in mortars, aiming to contribute to the sustainable development of construction materials and the socioeconomic recovery of the Lefke-Xeros area of Cyprus. The use of copper tailings has been shown to play a substantial role in reducing thermal conductivity and increasing cost efficiency of mortars in construction practice. The results significantly contribute to the sustainable development of construction materials through the use of mine tailings to support environmental sustainability and socio-economic development.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Disposal of mine tailings via geopolymerization

Zhang Xiaolong et al.

Summary: Mining plays a crucial role in human history, but also has negative impacts on the environment and health. Mine tailings are a significant threat from ore processing. Geopolymerization offers a promising approach to recycle mine tailings and convert waste into value.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Energy & Fuels

Determination of optimum polymer dosage for dewatering of oil sands tailings using torque rheology

Asif M. Salam et al.

Summary: This study examined the potential of using torque rheology to determine the optimum polymer dosage for tailings dewatering. The results suggested that peak torque and totalized torque could be reliable control parameters in optimizing polymer dosage.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Lipophilic tail modifications of 2-(hydroxymethyl)pyrrolidine scaffold reveal dual sphingosine kinase 1 and 2 inhibitors

Hao Li et al.

Summary: The study focused on the structure-activity relationship profiling of 2-(hydroxymethyl)pyrrolidine-based inhibitors, identifying 22d as the most potent dual SphK1/SphK2 inhibitor. Molecular modeling studies showed essential hydrogen bonding interactions between 22d and SphK1 and SphK2, providing insight into the intermolecular interactions in the active sites for maximal dual inhibitory activity.

BIOORGANIC & MEDICINAL CHEMISTRY (2021)

Add to Collection

Article Materials Science, Ceramics

Damage evaluation and deformation behavior of mine tailing-based Geopolymer under uniaxial cyclic compression

Nan Zhang et al.

Summary: Geopolymerized mine tailings can be used for construction materials with significant strength values, but their exposure to cyclic loading is a potential hazard. This study found that NaOH molarity significantly affects the elastic and plastic strains of geopolymer specimens. The Young's modulus of geopolymers shows an increase followed by a decrease with cycles, influenced by the NaOH molarity.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Environmental Sciences

Trace metals in Rio Doce sediments before and after the collapse of the Fundao iron ore tailing dam, Southeastern Brazil

Eduardo Baudson Duarte et al.

Summary: The collapse of the Fundao Dam in Southeastern Brazil led to a significant environmental disaster, impacting the Rio Doce river and its surrounding areas. Large amounts of iron ore tailings flowed into the river, affecting the concentration of trace metals in the sediments. The study found an increase in cadmium and arsenic levels in sediment after the disaster, with mining mud identified as the main source of cadmium.

CHEMOSPHERE (2021)

Add to Collection

Article Construction & Building Technology

Optimization for the preparation of composite geopolymer using response surface methodology and its application in lead-zinc tailings solidification

Shujie Zhao et al.

Summary: This study solidified heavy metals in lead-zinc tailings using composite geopolymers, with samples with 70% LZT addition showing a significant decrease in strength, but still meeting construction application standards.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Environmental Sciences

Manganese: The overlooked contaminant in the world largest mine tailings dam collapse

Hermano M. Queiroz et al.

Summary: The study assessed manganese contamination in the Rio Doce estuary after the collapse of the world's largest mine tailings dam, finding a significant increase in dissolved manganese and decrease in total manganese content in soils over the following two years. The dynamic interaction between Fe and Mn in the impacted estuary poses a high risk to estuarine biota and human health, indicating a possible chronic contamination scenario.

ENVIRONMENT INTERNATIONAL (2021)

Add to Collection

Article Environmental Sciences

Fugitive emissions of polycyclic aromatic compounds from an oil sands tailings pond based on fugacity and inverse dispersion flux calculations

Maryam Moradi et al.

Summary: This study for the first time assessed the emissions of PACs from the Suncor Tailings Pond 2/3 in Alberta, confirming volatilization fluxes of PACs using three different models. The findings highlight the necessity of gathering data from other tailings ponds to determine their contributions to PAC emissions to the atmosphere.

ENVIRONMENTAL POLLUTION (2021)

Add to Collection

Article Construction & Building Technology

On the incorporation of class F fly-ash to enhance the geopolymerization effects and splitting tensile strength of the gold mine tailings-based geopolymer

Nan Zhang et al.

Summary: Mine tailings and fly ash are utilized to produce geopolymer concrete for construction, with the need to adjust the Si:Al ratio for better geopolymerization effects. Experimental findings suggest that proper addition of fly ash can enhance the mechanical behavior of geopolymer materials, but excessive addition may lead to a decrease in tensile strength.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Recycling and utilization assessment of steel slag in metakaolin based geopolymer from steel slag by-product to green geopolymer

Xingyi Zhu et al.

Summary: This paper presents an experimental study on recycling steel slag waste as a supplementary material in metakaolin based geopolymer to create a new type of composite material. By analyzing the strength and microstructure of two different composites, it was found that the incorporation of steel slag into the geopolymer resulted in lower strength compared to the geopolymer without steel slag at early ages, but the negative effect decreased with curing age.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Mechanical and fracture behaviors of compacted gold mine tailings by semi-circular bending tests and digital image correlation

Nan Zhang et al.

Summary: The storage and handling of mine tailings present significant economic and environmental challenges, and finding alternative recycling or reuse methods is an ongoing process. This study experimentally investigated the mechanical and fracture behaviors of compacted mine tailings, indicating that the measured Mode I fracture toughness was not significantly influenced by notch depths and span distances, while fracture energy decreased with increasing notch depth and span distance. Maximum principal strains increased with notch depth.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Geological

Instrumented flume tests on the failure and fluidization of tailings dams induced by rainfall infiltration

W. Hu et al.

Summary: A study investigated the mechanisms of tailings-dam failure and fluidization through instrumented flume tests induced by artificial rainfall. The study found that continuous rainfall expanded macro-voids, led to particle rearrangement and local collapse, gradually increasing pore pressure and reducing shear strength. Antecedent rainfall raised moisture content, which promoted internal erosion and likely contributed significantly to dam failure.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Plant Sciences

Biochemical and physiological aspects of restinga herbaceous plants tolerance to iron ore tailing plume along the coastal region of Espirito Santo-Brazil

Jaciara Lana-Costa et al.

Summary: This study aimed to analyze the metabolic impact of heavy metals on Restinga herbaceous species in Brazil after the collapse of a mining dam in the Doce River Basin. By evaluating heavy metal concentrations, antioxidant compounds, and gas exchange, adaptive mechanisms of herbaceous species to excessive metal levels were identified. Physiological and biochemical responses to metals, including adjustments in photosynthetic parameters and changes in nitrogen metabolism, were observed, highlighting the need for further analysis over time.

ENVIRONMENTAL AND EXPERIMENTAL BOTANY (2021)

Add to Collection

Article Pharmacology & Pharmacy

The hydrophobic tail of a pH-sensitive cationic lipid influences siRNA transfection activity and toxicity in human NK cell lines

Takashi Nakamura et al.

Summary: The development of CL1H6-LNP offers a promising approach for efficient gene silencing in NK-92 cells with low cytotoxicity. The results suggest that CL1H6-LNP has the potential for delivering siRNA to NK-92 cells.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Full cost accounting: A missing consideration in global tailings dam management

Roger L. Burritt et al.

Summary: This conceptual paper argues that full cost accounting could fill a gap in the new Global Industry Tailings Management Standard by bringing knowledge of externalities to account. The current shortcomings in tailings dam management require the inclusion of external costs for improved decision-making, as highlighted in this paper's recommendations for integrating full cost accounting into best practice tailings management.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Construction & Building Technology

Synthesis and optimization of binary systems of brick and concrete wastes geopolymers at ambient environment

Obaid Mahmoodi et al.

Summary: This study investigates the use of binary system of concrete waste and red clay brick waste to develop geopolymer binders with appropriate fresh properties and high mechanical strengths at ambient curing. The optimal binary mix was found to be 40% CW + 60% BW, with significant strength enhancements achieved by adding supplementary cementitious materials with elevated alumina or calcium contents. Microstructural studies confirmed an advanced degree of geopolymerization and enhanced formation of intermixed products.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Environmental Sciences

First year after the Brumadinho tailings' dam collapse: Spatial and seasonal variation of trace elements in sediments, fishes and macrophytes from the Paraopeba River, Brazil

Claudio E. T. Parente et al.

Summary: The collapse of the B1 iron ore tailings dam in Brazil caused 270 deaths and released a large amount of tailings into the environment, affecting the Paraopeba River and aquatic biota. The study found that most elements in sediment had lower concentrations downstream, while aquatic biota showed higher concentrations, indicating an increase in element bioavailability.

ENVIRONMENTAL RESEARCH (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Bloom helicase explicitly unwinds 3′-tailed G4DNA structure in prostate cancer cells

Xu-hui Zhu et al.

Summary: The G-quadruplex DNA structure in cancer cells requires the involvement of DNA helicase for unwinding, and the helicase can bind to and unwind G4DNA. The binding and unwinding of G4DNA by helicase is influenced by the single-stranded DNA terminals in G4DNA.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of synthetic fibers on the properties of geopolymers based on non-heat treated phosphate mine tailing

Younesse Haddaji et al.

Summary: This study investigated the use of synthetic fibers as reinforcement for geopolymer matrix produced from phosphate mine tailings. The results showed that adding an appropriate amount of polypropylene and glass fibers significantly increased the flexural strength of the geopolymer composite, with polypropylene fibers also enhancing the ductility of the material.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Engineering, Environmental

An integrated value chain to iron-containing mine tailings capitalization by a combined process of magnetic separation, microwave digestion and microemulsion - assisted extraction

Alexandra Vasile et al.

Summary: Through a combined process of magnetic separation, microwave digestion, and microemulsion extraction, efficient recovery of iron, lead, zinc, and reduction of mine waste deposits and environmental pollution with heavy metals were achieved.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Engineering, Environmental

Utilization potential of mine tailings in geopolymers: Physicochemical and environmental aspects

Georgy Lazorenko et al.

Summary: The mining industry generates a significant amount of waste rock and tailings, which can harm the environment. Utilizing geopolymer technology offers a green solution to managing these wastes. This article reviews the characteristics of different types of tailings and the technology of preparing geopolymers based on them.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Environmental Sciences

On the effects of iron ore tailings micro/nanoparticles in embryonic and larval zebrafish (Danio rerio)

Vitor Otacilio de Almeida et al.

Summary: The study found that iron ore tailings particles did not have significant harmful effects on the development and behavior of zebrafish embryos and larvae, although particle adhesion on the chorion was observed. Therefore, the particle size range and potential interactions with SiO2 content may contribute to explaining this effect.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Engineering, Mechanical

Fracture properties of the gold mine tailings-based geopolymer under mode I loading condition through semi-circular bend tests with digital image correlation

Nan Zhang et al.

Summary: Sustainably reusing mine tailings and reducing the economic costs of storing them is a critical concern in geomechanics. This paper investigates the fracture behaviors of geopolymer made from mine tailings, highlighting the importance of understanding fracture toughness and notch depth sensitivity in geopolymer specimens. The study fills a knowledge gap in the field and provides insights into the fracture behaviors of geopolymer under different loading conditions.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

Add to Collection

Article Biophysics

Structural and dynamic characterization of the C-terminal tail of ErbB2: Disordered but not random

Louise Pinet et al.

Summary: ErbB2, a receptor tyrosine kinase overexpressed in some breast cancers, has been studied for its structure and function, particularly the disordered C-terminal cytoplasmic tail. The presence of transient structural elements suggests potential functional roles in ErbB2's autoregulation processes, providing new insights for mechanistic understanding.

BIOPHYSICAL JOURNAL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Compressive Strength of Sustainable Geopolymer Concrete Composites: A State-of-the-Art Review

Hemn Unis Ahmed et al.

Summary: Geopolymer concrete, utilizing industrial or agricultural by-product ashes as binders, has emerged as a sustainable construction material due to environmental issues associated with cement production. Compressive strength of geopolymer concrete is influenced by various parameters such as curing temperature, sodium silicate content, and alkaline solution to binder ratio.

SUSTAINABILITY (2021)

Add to Collection

Article Construction & Building Technology

Specimen size effects on the mechanical behaviors and failure patterns of the mine tailings-based geopolymer under uniaxial compression

Nan Zhang et al.

Summary: This study investigated the influence of cubic specimen size on the compressive strength of geopolymerized mine tailings (MTs), finding that the compressive strength decreases monotonically with increasing specimen size. The fracture strain increases with specimen size for certain water/mine tailing ratios, but this trend is reversed for ratios exceeding the optimum moisture content. Fracture patterns are not dependent on specimen size, with splitting cracks and column-like cracks observed across all specimen sizes.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Study on the feasibility of using iron ore tailing (iot) on technological properties of concrete roof tiles

Tony Matheus Carvalho Eugenio et al.

Summary: The study demonstrates that using iron ore tailing as a replacement for traditional materials can significantly improve the strength and porosity of concrete roof tiles. By increasing the amount of waste, the technological properties were enhanced, meeting international market standards.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Circular economy and durability in geopolymers ceramics pieces obtained from glass polishing waste

Afonso R. G. de Azevedo et al.

Summary: The research evaluated the development of a circular economy in producing roof tiles by incorporating glass polishing waste into ceramic pieces. Two methodologies were used to evaluate the sample's durability, with results showing that the SiO2/Al2O3 = 4.0 ratio with thermal curing had the best behavior in aggressive conditions, making it suitable for tile production.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review on developments of environmentally friendly geopolymer technology

R. S. Krishna et al.

Summary: This study provides an overview of the progress of geopolymer composites, focusing on the latest developments in constituents and manufacturing techniques. Alternative binders and replacement of natural aggregates have been highlighted as a result of limitations in traditional aluminosilicate binders. The research aims to encourage further experimental works for more sustainable and cost-effective geopolymer composites with enhanced mechanical properties.

MATERIALIA (2021)

Add to Collection

Article Cell Biology

Cysteine residues in the C-terminal tail of connexin32 regulate its trafficking

Anuttoma Ray et al.

Summary: Cx32 was found to be palmitoylated at cysteine 217 (C217) in cell line derived from prostate tumors, but mutating C217 to alanine had no effect on its function. Mutation of cysteine 280 and 283, only in combination, blocked the trafficking of Cx32 from the trans-Golgi network to the cell surface, leading to reduced stability.

CELLULAR SIGNALLING (2021)

Add to Collection

Article Materials Science, Ceramics

Crack evolution in the Brazilian disks of the mine tailings-based geopolymers measured from digital image correlations: An experimental investigation considering the effects of class F fly ash additions

Nan Zhang et al.

Summary: The study investigates the mechanical and fracture behavior of geopolymer with added fly ash, determining that the optimal ratio is a 15% addition of fly ash. Geopolymers without or with lower fly ash additions exhibit plastic deformation prior to the peak load, while geopolymers with added fly ash show both tensile and shear crack modes.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Construction & Building Technology

Cementitious activity of iron ore tailing and its utilization in cementitious materials, bricks and concrete

Na Zhang et al.

Summary: Iron ore tailings generated by the iron ore beneficiation industry pose major challenges for industry owners and local government. The best solution is to develop large-scale utilization technologies. This paper highlights three directions for utilizing iron ore tailings in construction materials, emphasizing their potential and economic advantages.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Physical-chemical processes of sustainable construction materials structure formation with iron ore processing tailings and aluminum anodizing sludge

Vsevolod Mymrin et al.

Summary: A new sustainable concrete-like construction composite has been developed by replacing traditional natural raw materials with industrial wastes, meeting Brazilian standards and offering environmentally friendly building materials.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Bending behavior and failure mode of cemented tailings backfill composites incorporating different fibers for sustainable construction

Gaili Xue et al.

Summary: This study investigated the crack resistance and post-peak toughness of fiber reinforced cemented tailings backfill composites, revealing the significant impact of fiber type, content, solid content, and cement to-tailings ratio on the bending strength. The study also established a numerical model to analyze crack propagation mechanism and evolution law, providing valuable insights for structural and operational design considerations in underground metal mines.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Comparative study on the effects of rice husk ash and silica fume on the freezing resistance of metakaolin-based geopolymer

Guangwei Liang et al.

Summary: The influences of rice husk ash (RHA) and silica fume (SF) on freezing resistance were investigated in this study. It was found that both RHA and SF can improve the pore structures and freezing resistance of metakaolin-based geopolymer, with RHA showing potential filling effect and SF acting more as an active supplementary material.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Environmental Sciences

Impacts on aquatic biota from salinization and metalloid contamination by gold mine tailings in sub-Arctic lakes

Madi Perrett et al.

Summary: This study examined the long-term impacts of past regional gold mining activities on sub-Arctic lakes near Con Mine, finding that the lakes were influenced by metal(loid) pollution and salt-rich mine drainage. The presence of halophilic diatom species in recent sediments suggests that extreme saline conditions continue to affect the biota over a decade after mining activities ceased. The lack of biological recovery indicates the ongoing challenges faced by mine-impacted lakes in terms of elevated contaminant levels and emerging stressors like climate warming and land-use changes.

ENVIRONMENTAL POLLUTION (2021)

Add to Collection

Article Environmental Sciences

Characterizations of heavy metal contamination, microbial community, and resistance genes in a tailing of the largest copper mine in China*

Xiawei Jiang et al.

Summary: This study investigated the heavy metal contents, microbial composition, and resistance genes in a copper mine tailing in Dexing Copper Mine, the largest open-pit copper mine in China. The results suggest a possible shaping influence of heavy metals on the microbiome and resistome, providing valuable data for the surveillance and maintenance of the tailing.

ENVIRONMENTAL POLLUTION (2021)

Add to Collection

Article Environmental Sciences

Global-scale impact analysis of mine tailings dam failures: 1915-2020

Kamrul Islam et al.

Summary: Tailings are waste materials generated from mining activities and stored in large dams, failures of which can have serious environmental impacts. Despite the availability of safer technologies for waste management, most mining companies have yet to adopt them.

GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Gene correction by 5′-tailed duplexes with short editor oligodeoxyribonucleotides

Hidehiko Kawai et al.

Summary: The study found that 5'-TDs with 100-base ss editor DNAs were as effective in gene correction as those with longer editor DNAs. Additionally, the antisense strand was more effective as the editor than the sense strand. These results suggest that 5'-TD fragments with shorter editor strands are useful for gene correction.

JOURNAL OF BIOSCIENCE AND BIOENGINEERING (2021)

Add to Collection

Article Environmental Sciences

Comprehensive evaluation of environmental availability, pollution level and leaching heavy metals behavior in non-ferrous metal tailings

Lei Jiang et al.

Summary: The study evaluated heavy metal pollution in abandoned non-ferrous metal tailings using various assessment methods, identifying Mo, Cd, Pb, Sr, and Mn as high-risk elements, while Cu, Ni, Cr, and Zn are low risk. Results indicated that the evaluation of Mo, Mn, and Sr is more accurate, and the release of Pb and Cd is influenced by the pH of the tailings. The most significant finding was the proposal of a comprehensive integration result of pollution risk levels based on multiple assessment methods.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Add to Collection

Article Polymer Science

Two-tailed tadpole-shaped synthetic polymer polypeptide bioconjugate nanomicelles for enhanced chemo-photothermal therapy

Rimesh Augustine et al.

Summary: A series of novel synthetic polymer polypeptide bio-conjugates have been synthesized for enhanced chemo-photothermal therapy, showing potential therapeutic effects on colon cancer cells through successful drug encapsulation and release.

POLYMER (2021)

Add to Collection

Article Multidisciplinary Sciences

Synthesis and characterization of coal fly ash and palm oil fuel ash modified artisanal and small-scale gold mine (ASGM) tailings based geopolymer using sugar mill lime sludge as Ca-based activator

Einstine M. Opiso et al.

Summary: Geopolymerization of artisanal and small-scale gold mining (ASGM) tailings can effectively stabilize and repurpose them into construction materials, preventing potential human health and environmental disasters. The study demonstrated that geopolymerization significantly improved the strength of the tailings while encapsulating toxic metals, showing great potential for practical application.

HELIYON (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Influence of nano TiO2 on strength and durability properties of geopolymer concrete

K. V. S. Gopala Krishna Sastry et al.

Summary: The study explores the effect of nano titanium dioxide on fly ash based geopolymer concrete, showing that an increase in the percentage of nano TiO2 can improve the strength and durability properties of the concrete. The maximum strength enhancement is observed when 5% of nano-TiO2 is incorporated in the geopolymer concrete, leading to better performance against sulphate and chloride solutions.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Synthesis of WEEE-based geopolymers and their cytotoxicity

Michelina Catauro et al.

Summary: Alkali activated metakaolin-based geopolymer materials were blended with fine powder glasses from waste electronic equipment to obtain geopolymers enriched with glass components. These materials showed significant antibacterial activity against Escherichia coli, with no health risks identified during cytotoxicity testing.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Ceramics

Preparation of one-part geopolymeric precursors using vanadium tailing by thermal activation

Yongpeng Luo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Chemistry, Analytical

Accelerated solvent extraction combined with GC-MS: A convenient technique for the determination and compound-specific stable isotope analysis of phthalates in mine tailings

Min Ning et al.

MICROCHEMICAL JOURNAL (2020)

Add to Collection

Article Construction & Building Technology

Spalling behavior of metakaolin-fly ash based geopolymer concrete under elevated temperature exposure

Hai Yan Zhang et al.

CEMENT & CONCRETE COMPOSITES (2020)

Add to Collection

Article Materials Science, Ceramics

Sustainable geopolymer composites reinforced with flax tows

Georgy Lazorenko et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Engineering, Environmental

Evaluation of mine tailings' potential as supplementary cementitious materials based on chemical, mineralogical and physical characteristics

Anne Mette T. Simonsen et al.

WASTE MANAGEMENT (2020)

Add to Collection

Article Environmental Sciences

Effects of curing temperature on the compressive strength and microstructure of copper tailing-based geopolymers

Xiang Tian et al.

CHEMOSPHERE (2020)

Add to Collection

Article Construction & Building Technology

Advances in alkali-activation of clay minerals

Ahmed Z. Khalifa et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Article Materials Science, Ceramics

Use of glass polishing waste in the development of ecological ceramic roof tiles by the geopolymerization process

Afonso R. G. de Azevedo et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Effect of pre-treatment of flax tows on mechanical properties and microstructure of natural fiber reinforced geopolymer composites

Georgy Lazorenko et al.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2020)

Add to Collection

Article Mining & Mineral Processing

A resilience-based approach in managing the closure and abandonment of large mine tailing ponds

Dragan Komljenovic et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Mine tailings as a raw material in alkali activation: A review

Jenni Kiventera et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Recycling mica and carbonate-rich mine tailings in alkali-activated composites: A synergy with metakaolin

He Niu et al.

MINERALS ENGINEERING (2020)

Add to Collection

Article Environmental Sciences

Is the Doce River elutriate or its water toxic to Astyanax lacustris (Teleostei: Characidae) three years after the Samarco mining dam collapse?

Larissa Souza Passos et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Environmental Sciences

Pollution and Ecological Risk Evaluation of Heavy Metals in the Soil and Sediment around the HTM Tailings Pond, Northeastern China

Wei Zhang et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2020)

Add to Collection

Review Geochemistry & Geophysics

Sourcing of critical elements and industrial minerals from mine waste - The final evolutionary step back to sustainability of humankind?

Bernhard Dold

JOURNAL OF GEOCHEMICAL EXPLORATION (2020)

Add to Collection

Article Environmental Sciences

Revegetation approach and plant identity unequally affect structure, ecological network and function of soil microbial community in a highly acidified mine tailings pond

Wen-hua Zhou et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Review Environmental Sciences

A review of recent strategies for acid mine drainage prevention and mine tailings recycling

Ilhwan Park et al.

CHEMOSPHERE (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Some developments and new insights of environmental problems and deep mining strategy for cleaner production in mines

Longjun Dong et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Mine Tailings Geopolymers as a Waste Management Solution for A More Sustainable Habitat

Helena Paiva et al.

SUSTAINABILITY (2019)

Add to Collection

Article Materials Science, Ceramics

Alkaline fused phosphate mine tailings for geopolymer mortar synthesis: Thermal stability, mechanical and microstructural properties

S. Moukannaa et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Use of geopolymer concrete for a cleaner and sustainable environment - A review of mechanical properties and microstructure

Amer Hassan et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Construction & Building Technology

Experimental Study of Geopolymer Binder Synthesized with Copper Mine Tailings and Low-Calcium Copper Slag

Lino Manjarrez et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Immobilization forms of ZnO in the solidification/stabilization (S/S) of a zinc mine tailing through geopolymerization

Qian Wan et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Construction & Building Technology

Effect of rice husk ash addition on the compressive strength and thermal stability of metakaolin based geopolymer

Guangwei Liang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Review Construction & Building Technology

Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges

Yanguang Wu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Modelling and optimization of gold mine tailings based geopolymer by using response surface method and its application in Pb2+ removal

Funda Demir et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Usage of gold mine tailings based geopolymer on Cu2+ adsorption from water

Funda Demir et al.

MAIN GROUP CHEMISTRY (2019)

Add to Collection

Review Engineering, Environmental

Determination and detoxification of cyanide in gold mine tailings: A review

Cosmos Anning et al.

WASTE MANAGEMENT & RESEARCH (2019)

Add to Collection

Article Materials Science, Ceramics

Ancient organo-mineral geopolymer in South-American Monuments: Organic matter in andesite stone. SEM and petrographic evidence

Joseph Davidovits et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Construction & Building Technology

Experimental study of shear wave velocity in unsaturated tailings soil with variant grain size distribution

Guansen Cao et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

Consolidation of mine tailings through geopolymerization at ambient temperature

Qian Wan et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Engineering, Chemical

One-part geopolymers from mining residues - Effect of thermal treatment on three different tailings

Priyadharshini Perumal et al.

MINERALS ENGINEERING (2019)

Add to Collection

Review Engineering, Chemical

Cemented paste backfill for mineral tailings management: Review and future perspectives

Chongchong Qi et al.

MINERALS ENGINEERING (2019)

Add to Collection

Article Geochemistry & Geophysics

Geopolymer Synthesis Using Garnet Tailings from Molybdenum Mines

An Wang et al.

MINERALS (2019)

Add to Collection

Article Geochemistry & Geophysics

Dewatering of Mine Tailings Slurries Using Superabsorbent Polymers (SAPs) Reclaimed from Industrial Reject of Baby Diapers: A Preliminary Study

Amal Sahi et al.

MINERALS (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Enhancing the reactivity of aluminosilicate materials toward geopolymer synthesis

L. N. Tchadjie et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Article Geosciences, Multidisciplinary

Physicochemical and mineralogical characterization of Musina mine copper and New Union gold mine tailings: Implications for fabrication of beneficial geopolymeric construction materials

M. W. Gitari et al.

JOURNAL OF AFRICAN EARTH SCIENCES (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Alkali activation as new option for gold mine tailings inertization

Jenni Kiventera et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Psychrophilic methanogenesis of food waste in a bio-electrochemical anaerobic digester with rotating impeller electrode

Jungyu Park et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Recycling mine tailings in chemically bonded ceramics - A review

Paivo Kinnunen et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Recycling of phosphate mine tailings for the production of geopolymers

S. Moukannaa et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Construction & Building Technology

Utilization of Copper Mine Tailings as Road Base Construction Material through Geopolymerization

Lino Manjarrez et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)

Add to Collection

Review Environmental Sciences

A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes

Ahmer Ali Siyal et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)

Add to Collection

Article Engineering, Geological

Relevance of SEM to Long-Term Mechanical Properties of Cemented Paste Backfill

Naguleswaran Niroshan et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Environmental

Immobilization of sulfates and heavy metals in gold mine tailings by sodium silicate and hydrated lime

Jenni Kiventera et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Emergy evaluation of cropping, poultry rearing, and fish raising systems in the drawdown zone of Three Gorges Reservoir of China

Hui Cheng et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Construction & Building Technology

Preparation Conditions for the Synthesis of Alkali-Activated Binders Using Tungsten Mining Waste

Gediminas Kastiukas et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)

Add to Collection

Article Environmental Sciences

The impact of submarine copper mine tailing disposal from the 1970s on Repparfjorden, northern Norway

Beata Sternal et al.

MARINE POLLUTION BULLETIN (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancement Experiment on Cementitious Activity of Copper-Mine Tailings in a Geopolymer System

Lin Yu et al.

FIBERS (2017)

Add to Collection

Article Construction & Building Technology

Properties of of an aged geopolymer synthesized from calcined ore-dressing tailing of bauxite and slag

Jiayuan Ye et al.

CEMENT AND CONCRETE RESEARCH (2017)

Add to Collection

Article Engineering, Manufacturing

Utilization of Iron Ore Tailings for the Production of Fly Ash - GGBS-Based Geopolymer Bricks

Raghunandan Kumar et al.

JOURNAL OF ADVANCED MANUFACTURING SYSTEMS (2017)

Add to Collection

Article Construction & Building Technology

Preparation of geopolymers from vanadium tailings by mechanical activation

Bo Wei et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Engineering, Chemical

Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers

Sanjay Kumar et al.

ADVANCED POWDER TECHNOLOGY (2017)

Add to Collection

Article Construction & Building Technology

Development and incorporation of lightweight waste-based geopolymer aggregates in mortar and concrete

Yliniemi et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Materials Science, Ceramics

Development of fly ash and iron ore tailing based porous geopolymer for removal of Cu(II) from wastewater

Ping Duan et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Construction & Building Technology

Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle

Ping Duan et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Fresh properties, mechanical strength and microstructure of fly ash geopolymer paste reinforced with sawdust

Ping Duan et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Engineering, Chemical

Utilization of sulphidic tailings from gold mine as a raw material in geopolymerization

Jenni Kiventera et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Experimental Study on Utilization of Quartz Mill Tailings as a Filler to Prepare Geopolymer

Mu Song et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Experimental Study on Utilization of Quartz Mill Tailings as a Filler to Prepare Geopolymer

Mu Song et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2016)

Add to Collection

Article Environmental Sciences

Utilisation of iron ore mine tailings for the production of geopolymer bricks

Francis A. Kuranchie et al.

INTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT (2016)

Add to Collection

Article Chemistry, Physical

Potential of inorganic polymers (geopolymers) made of halloysite and volcanic glass for the immobilisation of tailings from gold extraction in Ecuador

E. Barrie et al.

APPLIED CLAY SCIENCE (2015)

Add to Collection

Review Geochemistry & Geophysics

Geochemical and mineralogical aspects of sulfide mine tailings

Matthew B. J. Lindsay et al.

APPLIED GEOCHEMISTRY (2015)

Add to Collection

Article Engineering, Chemical

Control of geopolymer properties by grinding of land filled fly ash

Gabor Mucsi et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2015)

Add to Collection

Article Green & Sustainable Science & Technology

A framework for a sustainable approach to mine tailings management: disposal strategies

Joni Safaat Adiansyah et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Add to Collection

Article Construction & Building Technology

Alkali Activation of Copper Mine Tailings and Low-Calcium Flash-Furnace Copper Smelter Slag

Saeed Ahmari et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Activated carbons for the removal of heavy metal ions: A systematic review of recent literature focused on lead and arsenic ions

Eleni A. Deliyanni et al.

OPEN CHEMISTRY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Utilization of aluminum sludge (AS) to enhance mine tailings-based geopolymer

Xin Ren et al.

JOURNAL OF MATERIALS SCIENCE (2015)

Add to Collection

Article Construction & Building Technology

Performance Evolutions of Tailing-Slag-Based Geopolymer Under Severe Conditions

Jiayuan Ye et al.

JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS (2015)

Add to Collection

Review Geochemistry & Geophysics

Mine tailings dams: Characteristics, failure, environmental impacts, and remediation

D. Kossoff et al.

APPLIED GEOCHEMISTRY (2014)

Add to Collection

Article Construction & Building Technology

Effect of elevated temperature on the properties of geopolymer synthesized from calcined ore-dressing tailing of bauxite and ground-granulated blast furnace slag

Jiayuan Ye et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

Improving reactivity of fly ash and properties of ensuing geopolymers through mechanical activation

N. Marjanovic et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Review Green & Sustainable Science & Technology

Designing mine tailings for better environmental, social and economic outcomes: a review of alternative approaches

Mansour Edraki et al.

JOURNAL OF CLEANER PRODUCTION (2014)

Add to Collection

Article Construction & Building Technology

Flexural Behavior of Concrete Beams Reinforced with Different Types of Geogrids

F. El Meski et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2014)

Add to Collection

Article Construction & Building Technology

Durability and leaching behavior of mine tailings-based geopolymer bricks

Saeed Ahmari et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricks

Saeed Ahmari et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Thermal stability of a silica-rich vanadium tailing based geopolymer

Xiangke Jiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Kaolin-based geopolymers: Effect of mechanical activation and curing process

Ayi D. Hounsi et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Production of eco-friendly bricks from copper mine tailings through geopolymerization

Saeed Ahmari et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Construction & Building Technology

Production of geopolymeric binder from blended waste concrete powder and fly ash

Saeed Ahmari et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of activator type/concentration and curing temperature on alkali-activated binder based on copper mine tailings

Saeed Ahmari et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Add to Collection

Review Environmental Sciences

A review on the importance of metals and metalloids in atmospheric dust and aerosol from mining operations

Janae Csavina et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2012)

Add to Collection

Proceedings Paper Engineering, Chemical

Leaching of F-type fly ash based geopolymers

E. Arioz et al.

CHISA 2012 (2012)

Add to Collection

Article Materials Science, Ceramics

Mechanical activation of fly ash: Effect on reaction, structure and properties of resulting geopolymer

Sanjay Kumar et al.

CERAMICS INTERNATIONAL (2011)

Add to Collection

Article Construction & Building Technology

Synthesis and characterization of fly ash modified mine tailings-based geopolymers

Lianyang Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Add to Collection

Article Geochemistry & Geophysics

Recycling, Reuse and Rehabilitation of Mine Wastes

Bernd G. Lottermoser

ELEMENTS (2011)

Add to Collection

Article Engineering, Chemical

Geopolymerisation of a silica-rich tailing

Jiao Xiangke et al.

MINERALS ENGINEERING (2011)

Add to Collection

Article Environmental Sciences

Chemical Research and Climate Change as Drivers in the Commercial Adoption of Alkali Activated Materials

Jannie S. J. van Deventer et al.

WASTE AND BIOMASS VALORIZATION (2010)

Add to Collection

Review Construction & Building Technology

Chloride binding of cement-based materials subjected to external chloride environment - A review

Qiang Yuan et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Ecology

Interactions between black-tailed prairie dogs (Cynomys ludovicianus) and vegetation in habitat fragmented by urbanization

S. B. Magle et al.

JOURNAL OF ARID ENVIRONMENTS (2008)

Add to Collection

Article Engineering, Environmental

A review of the European incidents in the worldwide context

M. Rico et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate

VFF Barbosa et al.

MATERIALS RESEARCH BULLETIN (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.