Related references
Note: Only part of the references are listed.Functionalization as a way to enhance dispersion of carbon nanotubes in matrices: a review
L. Lavagna et al.
MATERIALS TODAY CHEMISTRY (2021)
Effect of functionalized multi-walled carbon nanotubes on mechanical properties and durability of cement mortars
Morteza Mansouri Sarvandani et al.
JOURNAL OF BUILDING ENGINEERING (2021)
New insights into creep characteristics of calcium silicate hydrates at molecular level
M. F. Kai et al.
CEMENT AND CONCRETE RESEARCH (2021)
Calcium hydroxide content and hydration degree of cement in cementitious composites containing calcium silicate slag
Ru Bai et al.
CHEMOSPHERE (2021)
Insights on failure modes of calcium-silicate-hydrate interface strengthened by polyacrylamides: Structure, dynamic and mechanical properties
Gang Qiao et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Enhanced tensile ductility and sustainability of high-strength strain-hardening cementitious composites using waste cement kiln dust and oxidized polyethylene fibers
Doo-Yeol Yoo et al.
CEMENT & CONCRETE COMPOSITES (2021)
Mechanical and microscopic properties of fly ash phosphoric acid-based geopolymer paste: A comprehensive study
Shaoyun Pu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
The synergistic effect of CNTs-polymeric surfactant on the properties of concrete nanocomposites: Comparative study
Omer Guler et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Cure Behavior Changes and Compression of Carbon Nanotubes in Aerospace Grade Bismaleimide-Carbon Nanotube Sheet Nanocomposites
Mohammad Hamza Kirmani et al.
ACS APPLIED NANO MATERIALS (2021)
Effect of polyvinyl alcohol powder on the bonding mechanism of a new magnesium phosphate cement mortar
Yudong Xie et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The preparation of novel polyvinyl alcohol (PVA)-based nanoparticle/carbon nanotubes (PNP/CNTs) aerogel for solvents adsorption application
Han Zhang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)
Polyvinyl Alcohol/Graphene Oxide Interlayer for Enhancing Adhesive Performance of HA Coating on C/C Composites Prepared by Hydrothermal Electrodeposition/Hydrothermal Treatment
Xin-Bo Xiong et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Hierarchical Toughening of a Biomimetic Bulk Cement Composite
Hao Pan et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Cement paste with well-dispersed multi-walled carbon nanotubes: Mechanism and performance
Jinyuan Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Insights into the interfacial strengthening mechanism of waste rubber/cement paste using polyvinyl alcohol: Experimental and molecular dynamics study
Qinghua Han et al.
CEMENT & CONCRETE COMPOSITES (2020)
Dispersions of High-Quality Carbon Nanotubes with Narrow Aggregate Size Distributions by Viscous Liquid for Conducting Polymer Composites
Kazufumi Kobashi et al.
ACS APPLIED NANO MATERIALS (2020)
Reinforcement of Polymer-Based Nanocomposites by Thermally Conductive and Electrically Insulating Boron Nitride Nanotubes
Weimiao Wang et al.
ACS APPLIED NANO MATERIALS (2020)
Corrosion behavior of steel rebar embedded in hybrid CNTs-OH/polyvinyl alcohol modified concrete under accelerated chloride attack
Zhongkun Wang et al.
CEMENT & CONCRETE COMPOSITES (2019)
Effect of CNT addition and dispersive agents on the transport properties and microstructure of cement mortars
P. Alafogianni et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Molecular dynamics modeling of the structure, dynamics, energetics and mechanical properties of cement-polymer nanocomposite
Dongshuai Hou et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical Properties and Microstructure of Polyvinyl Alcohol (PVA) Modified Cement Mortar
Jie Fan et al.
APPLIED SCIENCES-BASEL (2019)
Aggregation size effect of graphene oxide on its reinforcing efficiency to cement-based materials
Zeyu Lu et al.
CEMENT & CONCRETE COMPOSITES (2019)
A comprehensive study of basalt fiber reinforced magnesium phosphate cement incorporating ultrafine fly ash
Muhammad Riaz Ahmad et al.
COMPOSITES PART B-ENGINEERING (2019)
Aggregation of oxidized multi-walled carbon nanotubes: Interplay of nanomaterial surface O-functional groups and solution chemistry factors
Tianjiao Xia et al.
ENVIRONMENTAL POLLUTION (2019)
Modeling the mechanical properties of cementitious materials containing CNTs
Mahyar Ramezani et al.
CEMENT & CONCRETE COMPOSITES (2019)
Interaction mechanisms between organic and inorganic phases in calcium silicate hydrates/poly(vinyl alcohol) composites
Yang Zhou et al.
CEMENT AND CONCRETE RESEARCH (2019)
Aligned CNT Forests on Stainless Steel Mesh for Flexible Supercapacitor Electrode with High Capacitance and Power Density
Piyush Avasthi et al.
ACS APPLIED NANO MATERIALS (2019)
Thermal, mechanical, and surface properties of poly(vinyl alcohol) (PVA) polymer modified cementitious composites for sustainable development
Zeyu Lu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
Flexible Polymer-Carbon Nanotube Composite with High-Response Stability for Wearable Thermal Imaging
Mingyu Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Carbon nanotube-poly(vinyl alcohol) hybrid aerogels: Improvements in the surface area and structural stability by internal morphology control
Ok-Kyung Park et al.
COMPOSITES PART B-ENGINEERING (2018)
Effect of temperature history and restraint degree on cracking behavior of early-age concrete
Jianda Xin et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Role of Multiwalled Carbon Nanotubes as Shear Reinforcing Nanopins in Quasi-Brittle Matrices
Ming Rui Du et al.
ACS APPLIED NANO MATERIALS (2018)
Mechanical properties and reinforcing mechanisms of cementitious composites with different types of multiwalled carbon nanotubes
Xia Cui et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Interfacial Connection Mechanisms in Calcium-Silicate-Hydrates/Polymer Nanocomposites: A Molecular Dynamics Study
Yang Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Hydration development of mineral additives blended cement using thermogravimetric analysis (TGA): Methodology of calculating the degree of hydration
Walid Deboucha et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Nano-core effect in nano-engineered cementitious composites
Baoguo Han et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
High-Performance Carbon Nanotube/Polymer Composite Fiber from Layer-by-Layer Deposition
Min Le Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Dispersion of multi-walled carbon nanotubes and its effects on the properties of cement composites
Forood Torabian Isfahani et al.
CEMENT & CONCRETE COMPOSITES (2016)
Tensile strength of hydrated cement paste phases assessed by micro-bending tests and nanoindentation
J. Nemecek et al.
CEMENT & CONCRETE COMPOSITES (2016)
Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behavior
C. C. Thong et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of the morphology of structured carbon nanomaterials on their oxidizability
S. V. Savilov et al.
RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY A (2016)
Mechanism of cement paste reinforced by graphene oxide/carbon nanotubes composites with enhanced mechanical properties
Zeyu Lu et al.
RSC ADVANCES (2015)
Capillary tension theory for prediction of early autogenous shrinkage of self-consolidating concrete
Yue Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Molecular dynamics study on the mode I fracture of calcium silicate hydrate under tensile loading
Dongshuai Hou et al.
ENGINEERING FRACTURE MECHANICS (2014)
Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application
Hongyan Ma
JOURNAL OF POROUS MATERIALS (2014)
Fabrication of flexible SWCNT thin films through electrohydrodynamic atomization technique and investigation of their electrical properties
Sridharan Sundharam et al.
MATERIALS LETTERS (2014)
The degree of hydration assessment of blended cement pastes by differential thermal and thermogravimetric analysis. Morphological evolution of the solid phases
S. M. Monteagudo et al.
THERMOCHIMICA ACTA (2014)
Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History
Nannan Shi et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2014)
Control of hydration rate of polymer modified cements by the addition of organically modified montmorillonites
Teresa M. Pique et al.
CEMENT & CONCRETE COMPOSITES (2013)
Realistic pore structure of Portland cement paste: experimental study and numerical simulation
Hongyan Ma et al.
Computers and Concrete (2013)
Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms
Hongyan Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Toughness Governs the Rupture of the Interfacial H-Bond Assemblies at a Critical Length Scale in Hybrid Materials
Navid Sakhavand et al.
LANGMUIR (2013)
Finely Dispersed Single-Walled Carbon Nanotubes for Polysaccharide Hydrogels
Liang Yu Yan et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix
Anastasia Sobolkina et al.
CEMENT & CONCRETE COMPOSITES (2012)
Empirical force fields for complex hydrated calcio-silicate layered materials
Rouzbeh Shahsavari et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)
The effect of SWCNT with the functional group deposited on the counter electrode on the dye-sensitized solar cell
Chuen-Shii Chou et al.
ADVANCED POWDER TECHNOLOGY (2010)
Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites
Peng-Cheng Ma et al.
CARBON (2010)
Gel characterisation and in vivo evaluation of minocycline-loaded wound dressing with enhanced wound healing using polyvinyl alcohol and chitosan
Jung Hoon Sung et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2010)
FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde
Herman S. Mansur et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2008)
Investigation of blended cement hydration by isothermal calorimetry and thermal analysis
I Pane et al.
CEMENT AND CONCRETE RESEARCH (2005)
Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes
GY Li et al.
CARBON (2005)
Predicting Ca(OH)2 content and chemical shrinkage of hydrating cement pastes using analytical approach
P Mounanga et al.
CEMENT AND CONCRETE RESEARCH (2004)