☆ 4.6 Article

A pilot project for the long-term structural health monitoring of historic city gates

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

A quality-based automated procedure for operational modal analysis

Giacomo Zini et al.

Summary: This paper focuses on improving the Automated Operational Modal Analysis (AOMA) procedures by introducing new methods and addressing issues related to tuning parameters, processing large datasets, and validating extracted modal parameters.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Construction & Building Technology

Experimental analysis of the traffic-induced-vibration on an ancient lodge

Giacomo Zini et al.

Summary: Traffic-induced vibration is a significant cause of small damages to Heritage buildings. This paper compares the efficiency of two common methods for calculating velocities and analyzes the phenomenon systematically, highlighting an increase in traffic-induced vibrations on the lodge due to road unevenness. The study emphasizes the importance of understanding and addressing the impact of traffic-induced vibrations on structures.

STRUCTURAL CONTROL & HEALTH MONITORING (2022)

Add to Collection

Article Architecture

An Innovative Methodology for Online Surrogate-Based Model Updating of Historic Buildings Using Monitoring Data

Enrique Garcia-Macias et al.

Summary: This paper presents a surrogate-based model updating approach for online assessment of historic buildings, using the example of the Sciri Tower in Perugia, Italy. By utilizing modal properties identified by A-OMA, the method allows for continuous fitting of certain damage-sensitive parameters of the structure.

INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2021)

Add to Collection

Article Architecture

Wireless Sensor Networks for Continuous Structural Health Monitoring of Historic Masonry Towers

Paolo Barsocchi et al.

Summary: The recent developments of micro-electro-mechanical systems and wireless sensor networks have enabled the cost-effective and small-size sensors for continuous monitoring of civil structures. Despite the growing interest in continuous monitoring, many questions remain open about the sensitivity of measurement devices, the optimization of sensors, the energy efficiency of the network, and the development of algorithms for real-time data analysis.

INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2021)

Add to Collection

Review Construction & Building Technology

Structural health monitoring (SHM) and Nondestructive testing (NDT) of slender masonry structures: A practical review

Francisco J. Pallares et al.

Summary: The scientific community is actively working on proposing reliable analysis methodologies and non-invasive investigation technologies to assess the current state of conservation of historic buildings and to confirm their ability to resist future threats. The focus is on preserving invaluable cultural heritage through suitable structural assessment techniques, with attention paid to monitoring structural health using advanced technological methods like sensors, wireless connections, and continuous monitoring. Research has shown an increase in papers published on Structural Health Monitoring (SHM) and Nondestructive Testing (NDT) of masonry structures, particularly on slender elements in recent years.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Long-Term Seismometric Monitoring of the Two Towers of Bologna (Italy): Modal Frequencies Identification and Effects Due to Traffic Induced Vibrations

Simonetta Baraccani et al.

FRONTIERS IN BUILT ENVIRONMENT (2020)

Add to Collection

Article Construction & Building Technology

Dynamic Identification as a Tool to Constrain Numerical Models for Structural Analysis of Historical Buildings

G. Lacanna et al.

FRONTIERS IN BUILT ENVIRONMENT (2020)

Add to Collection

Article Engineering, Geological

Mechanical characterisation of Tuscany masonry typologies by in situ tests

Sonia Boschi et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Simple model for predicting the vibration transmission of a squat masonry tower by base forced vibrations

Salvador Ivorra et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2019)

Add to Collection

Article Engineering, Mechanical

Parametric dynamic interaction assessment between bells and supporting slender masonry tower

David Bru et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Computer Science, Hardware & Architecture

Sensing a City's State of Health

Paolo Barsocchi et al.

IEEE CONSUMER ELECTRONICS MAGAZINE (2018)

Add to Collection

Article Engineering, Civil

Continuous monitoring of a challenging heritage tower in Monza, Italy

Antonella Saisi et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2018)

Add to Collection

Article Engineering, Geological

Assessment of a monumental masonry bell-tower after 2016 Central Italy seismic sequence by long-term SHM

Filippo Ubertini et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Automated modal identification and tracking: Application to an iron arch bridge

Alessandro Cabboi et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2017)

Add to Collection

Article Construction & Building Technology

Semiempirical Formulations for Estimating the Main Frequency of Slender Masonry Towers

Gianni Bartoli et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2017)

Add to Collection

Article Construction & Building Technology

Seismic Risk Assessment of Historic Masonry Towers: Comparison of Four Case Studies

Gianni Bartoli et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2017)

Add to Collection

Proceedings Paper Engineering, Civil

Detecting earthquake-induced damage in historic masonry towers using continuously monitored dynamic response-only data

Nicola Cavalagli et al.

X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017) (2017)

Add to Collection

Article Engineering, Civil

Model updating using genetic algorithms with sequential niche technique

Faisal Shabbir et al.

ENGINEERING STRUCTURES (2016)

Add to Collection

Article Mechanics

One-year dynamic monitoring of a historic tower: damage detection under changing environment

Carmelo Gentile et al.

MECCANICA (2016)

Add to Collection

Article Engineering, Multidisciplinary

Vibration-based structural health monitoring of a historic bell-tower using output-only measurements and multivariate statistical analysis

Filippo Ubertini et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2016)

Add to Collection

Article Architecture

Empirical Formulation for Estimating the Fundamental Frequency of Slender Masonry Structures

Manjip Shakya et al.

INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE (2016)

Add to Collection

Article Archaeology

Post-earthquake diagnostic investigation of a historic masonry tower

Antonella Saisi et al.

JOURNAL OF CULTURAL HERITAGE (2015)

Add to Collection

Article Engineering, Mechanical

Development and validation of an automated operational modal analysis algorithm for vibration-based monitoring and tensile load estimation

Carlo Rainieri et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)

Add to Collection

Article Mechanics

Damage detection on a three-storey steel frame using artificial neural networks and genetic algorithms

Michele Betti et al.

MECCANICA (2015)

Add to Collection

Article Engineering, Civil

Comparative seismic vulnerability analysis on ten masonry towers in the coastal Po Valley in Italy

Siro Casolo et al.

ENGINEERING STRUCTURES (2013)

Add to Collection

Article Engineering, Civil

Automated modal identification in operational conditions and its application to bridges

Filippo Ubertini et al.

ENGINEERING STRUCTURES (2013)

Add to Collection

Article Engineering, Mechanical

Sensor placement for modal identification

Cyrille Stephan

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

Add to Collection

Article Archaeology

Assessment of vibration reduction on the Baptistery of San Giovanni in Florence (Italy) after vehicular traffic block

Matteo Fratini et al.

JOURNAL OF CULTURAL HERITAGE (2011)

Add to Collection

Article Archaeology

A multilevel approach for the damage assessment of Historic masonry towers

Anna Anzani et al.

JOURNAL OF CULTURAL HERITAGE (2010)

Add to Collection

Article Architecture

Managing the Historical Heritage Using Distributed Technologies

Daniele Zonta et al.

International Journal of Architectural Heritage (2008)

Add to Collection

Article Engineering, Mechanical

A multistage FE updating procedure for damage identification in large-scale structures based on multiobjective evolutionary optimization

Ricardo Perera et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2008)

Add to Collection

Article Construction & Building Technology

A method for large-scale vulnerability assessment of historic towers

Vincenzo Sepe et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2008)

Add to Collection

Article Construction & Building Technology

Dynamic behavior of a medieval masonry bell tower. II: Measurement and modeling of the tower motion

S Bennati et al.

JOURNAL OF STRUCTURAL ENGINEERING (2005)

Add to Collection

Article Acoustics

Optimal sensor placement methodology for parametric identification of structural systems

C Papadimitriou

JOURNAL OF SOUND AND VIBRATION (2004)

Add to Collection

Article Acoustics

Measurement and prediction of traffic-induced vibrations in a heritage building

M Crispino et al.

JOURNAL OF SOUND AND VIBRATION (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.