4.7 Article

Optimization Strategies Used for Boosting Piezoelectric Response of Biosensor Based on Flexible Micro-ZnO Composites

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Printing smart coating of piezoelectric composite for application in condition monitoring of bearings

Van-Cuong Nguyen et al.

Summary: This paper reports on a novel technique of bearing load monitoring using smart sensor coating. Screen printing is used to deposit multilayered thin films on the outer bearing or a flat steel substrate, and a new design is proposed to enhance the sensitivity. The proposed approach shows higher sensitivity and easier integration compared to classical piezoresistive technology.

MATERIALS & DESIGN (2022)

Article Materials Science, Multidisciplinary

Micro-Structuration of Piezoelectric Composites Using Dielectrophoresis: Toward Application in Condition Monitoring of Bearings

Giulia D'Ambrogio et al.

Summary: Piezoelectric soft material based on inorganic/organic composites suitable for aerospace and aeronautical monitoring sensors is fabricated by improving the connectivity of the ceramic filler to enhance piezoelectric properties. The 1-3 connectivity of PZT/PDMS composites shows superior piezoelectric behavior and stability, even at high temperatures, compared to the 0-3 configuration. This new class of composites has potential for integration into aircraft ball bearings for condition monitoring.

ADVANCED ENGINEERING MATERIALS (2021)

Article Materials Science, Multidisciplinary

Dielectrophoretic alignment of Al2O3/PDMS composites: Enhancement of thermal and dielectric properties through structural sedimentation analysis

Omar Zahhaf et al.

Summary: Thermally conductive composites with structural improvements through dielectrophoretic alignment show enhanced thermal conductivities while maintaining insulating properties. Dielectrophoresis is an effective method for achieving better structures in these materials. This study focuses on improving the thermal and dielectric properties of Al2O3/PDMS composites through dielectrophoretic alignment.

MATERIALS & DESIGN (2021)

Article Materials Science, Multidisciplinary

Characterization of micro-ZnO/PDMS composite structured via dielectrophoresis-Toward medical application

Xiaoting Zhang et al.

Summary: This paper proposed a new approach to achieve full characteristic of highly non-linear current density-electric field curve, which is important in the application of microvaristors used as protection devices. By controlling different parameters, it is possible to enhance the electrical and mechanical characteristics of ZnO composite, making it highly suitable for medical applications requiring multifunctional system design.

MATERIALS & DESIGN (2021)

Article Materials Science, Multidisciplinary

Engineering nitrogen- and hydrogen-related defects in ZnO nanowires using thermal annealing

Jose Villafuerte et al.

Summary: The study reveals the significant impact of nitrogen-related defects on the physical properties of ZnO nanowires and demonstrates that these defects can be tuned through thermal annealing. The evolution of defects is found to be complex and fine, with successive formation and dissociation processes highlighted as a function of annealing temperature.

PHYSICAL REVIEW MATERIALS (2021)

Article Chemistry, Analytical

Regenerable ZnO/GaAs Bulk Acoustic Wave Biosensor for Detection of Escherichia coli in Complex Biological Medium

Juliana Chawich et al.

Summary: A regenerable bulk acoustic wave biosensor has been developed for rapid, label-free, and selective detection of Escherichia coli in liquid media. The biosensor geometry includes a GaAs membrane coated with piezoelectric ZnO, with electrodes for BAW generation and functionalized with antibodies for immunocapture optimization. Evaluation of the biosensor's performance showed a linear relationship between frequency response and E. coli concentration, with a detection limit estimated at 10^3 CFU/mL, demonstrating potential for operation in complex biological media.

BIOSENSORS-BASEL (2021)

Article Chemistry, Analytical

A Portable and Flexible Self-Powered Multifunctional Sensor for Real-Time Monitoring in Swimming

Yupeng Mao et al.

Summary: The portable and flexible self-powered biosensor, based on ZnO nanowire arrays and flexible PET substrate, can work in air and water without external power supply, making it ideal for real-time monitoring during swimming. It accurately monitors joint movement angles and frequencies, with a constant output piezoelectric signal, suitable for various sports applications, such as swimming.

BIOSENSORS-BASEL (2021)

Article Materials Science, Multidisciplinary

Structuring BaTiO3/PDMS Nanocomposite via Dielectrophoresis for Fractional Flow Reserve Measurement

Giulia D'Ambrogio et al.

Summary: This work develops piezoelectric sensors for FFR technique, focusing on biocompatibility, composites with structured fillers show enhanced piezoelectric properties, and the sensor's piezoelectric response is superior under high-temperature conditions.

ADVANCED ENGINEERING MATERIALS (2021)

Article Materials Science, Multidisciplinary

3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect

Ziyin Xiang et al.

Summary: The authors used a commercial extrusion 3D printer to process magnetic pastes into flexible ferromagnetic samples, achieving improved relative permeability and low-frequency induction heating effect. The magnetic particles formed a chain-like structure during printing, leading to magnetic and thermal anisotropies. Their research is highly relevant in healthcare applications, particularly in endovascular ablation for varicose treatment.

MACROMOLECULAR MATERIALS AND ENGINEERING (2021)

Article Chemistry, Physical

Dielectrophoresis Structurization of PZT/PDMS Micro-Composite for Elastronic Function: Towards Dielectric and Piezoelectric Enhancement

Giulia D'Ambrogio et al.

Summary: Piezoelectric composites, particularly those with PZT filler in PDMS matrix, have unique internal structure and are widely used in structural monitoring sensors in various fields due to their high performance and low-cost characteristics.

MATERIALS (2021)

Article Polymer Science

Influence of Matrix and Surfactant on Piezoelectric and Dielectric Properties of Screen-Printed BaTiO3/PVDF Composites

Carlo Carbone et al.

Summary: This study compared the impact of different matrices and additives on the properties of screen-printed BaTiO3/PVDF composites. The results showed that the use of surfactants helped prevent phase separation, improve dispersion, and enhance the stability and performance of the composites.

POLYMERS (2021)

Article Chemistry, Multidisciplinary

Characterizing and Optimizing Piezoelectric Response of ZnO Nanowire/PMMA Composite-Based Sensor

Xiaoting Zhang et al.

Summary: Due to the excellent coupling between piezoelectric and semiconducting properties of zinc oxide nanowires, ZnO NW-based structures show great potential in various applications. The proposed piezoelectric composite consisting of vertically aligned ZnO NW arrays and an insulating polymer matrix has been optimized for enhanced piezoelectric sensitivity and high sensing abilities. Experimentally and theoretically, the developed material demonstrates promising results for medical applications, particularly for the FFR technique.

NANOMATERIALS (2021)

Proceedings Paper Engineering, Electrical & Electronic

Effect of dielectrophoretic structuring on dielectric and piezoelectric behaviors of ZnO/PDMS microcomposite

Xiaoting Zhang et al.

Summary: This study investigates the piezoelectric behavior of a PDMS polymer filled with ZnO microparticles under different processing conditions. By utilizing dielectrophoretic alignment, the composite showed enhanced dielectric and piezoelectric properties compared to randomly dispersed particles. Simulation and experiment results demonstrated that a well-designed network structure can improve the piezoelectric performance of the composite material.

ELECTROACTIVE POLYMER ACTUATORS AND DEVICES (EAPAD) XXIII (2021)

Editorial Material Cardiac & Cardiovascular Systems

Mitral valve repair based on physical characterization of coaptation forces

Daniel Grinberg et al.

JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY (2020)

Article Multidisciplinary Sciences

Effect of beta-based sterilization on P(VDF-TrFE-CFE) terpolymer for medical applications

Nellie Della Schiava et al.

SCIENTIFIC REPORTS (2020)

Article Materials Science, Multidisciplinary

Boosted energy-storage efficiency by controlling conduction loss of multilayered polymeric capacitors

Francesco Pedroli et al.

MATERIALS & DESIGN (2020)

Article Materials Science, Multidisciplinary

Enhancing dielectric and piezoelectric properties of micro-ZnO/PDMS composite-based dielectrophoresis

Xiaoting Zhang et al.

MATERIALS & DESIGN (2020)

Article Chemistry, Analytical

A Self-Powered Biosensor for Monitoring Maximal Lactate Steady State in Sport Training

Yupeng Mao et al.

BIOSENSORS-BASEL (2020)

Article Chemistry, Physical

Zinc Vacancy-Hydrogen Complexes as Major Defects in ZnO Nanowires Grown by Chemical Bath Deposition

Jose Villafuerte et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Article Materials Science, Multidisciplinary

Enhanced pseudo-piezoelectric dynamic force sensors based on inkjet-printed electrostrictive terpolymer

Qing Liu et al.

ORGANIC ELECTRONICS (2019)

Article Chemistry, Inorganic & Nuclear

The Path of Gallium from Chemical Bath into ZnO Nanowires: Mechanisms of Formation and Incorporation

Pierre Gaffuri et al.

INORGANIC CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

In-Suspension Growth of ZnO Nanorods with Tunable Length and Diameter Using Polymorphic Seeds

Silvano Del Gobbo et al.

CRYSTAL GROWTH & DESIGN (2019)

Article Polymer Science

4D Printing based piezoelectric composite for medical applications

Daniel Grinberg et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2019)

Article Cardiac & Cardiovascular Systems

Measuring chordae tension during transapical neochordae implantation: Toward understanding objective consequences of mitral valve repair

Daniel Grinberg et al.

JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY (2019)

Article Engineering, Manufacturing

Fabrication of Piezoelectric Composites Using High-Temperature Dielectrophoresis

Jibran Khaliq et al.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)

Article Multidisciplinary Sciences

Mitral valve repair based on intraoperative objective measurement

Daniel Grinberg et al.

SCIENTIFIC REPORTS (2019)

Article Polymer Science

Processing optimization: A way to improve the ionic conductivity and dielectric loss of electroactive polymers

Francesco Pedroli et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2018)

Article Chemistry, Inorganic & Nuclear

Effects of the pH on the Formation and Doping Mechanisms of ZnO Nanowires Using Aluminum Nitrate and Ammonia

Claire Verrier et al.

INORGANIC CHEMISTRY (2017)

Article Physics, Applied

First-principles characterization of native-defect-related optical transitions in ZnO

J. L. Lyons et al.

JOURNAL OF APPLIED PHYSICS (2017)

Article Cardiac & Cardiovascular Systems

The correlation between the coaptation height of mitral valve and mitral regurgitation after mitral valve repair

Dan Wei et al.

JOURNAL OF CARDIOTHORACIC SURGERY (2017)

Article Chemistry, Physical

Tunable Morphology and Doping of ZnO Nanowires by Chemical Bath Deposition Using Aluminum Nitrate

Claire Verrier et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Article Cardiac & Cardiovascular Systems

Outcomes With Transcatheter Mitral Valve Repair in the United States An STS/ACC TVT Registry Report

Paul Sorajja et al.

JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY (2017)

Article Materials Science, Multidisciplinary

Printable low-cost and flexible carbon nanotube buckypaper motion sensors

Joshua DeGraff et al.

MATERIALS & DESIGN (2017)

Article Materials Science, Multidisciplinary

Printing of microstructure strain sensor for structural health monitoring

Minh Quyen Le et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)

Article Materials Science, Multidisciplinary

Hydrogen-related excitons and their excited-state transitions in ZnO

R. Heinhold et al.

PHYSICAL REVIEW B (2017)

Article Materials Science, Multidisciplinary

Magnetoelectric properties of nickel nanowires-P(VDF-TrFE) composites

Thanh Hoai Lucie Nguyen et al.

MATERIALS CHEMISTRY AND PHYSICS (2015)

Article Materials Science, Multidisciplinary

Infrared absorption on a complex comprising three equivalent hydrogen atoms in ZnO

F. Herklotz et al.

PHYSICAL REVIEW B (2015)

Article Chemistry, Multidisciplinary

Ultrathin Nanogenerators as Self-Powered/Active Skin Sensors for Tracking Eye Ball Motion

Sangmin Lee et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Engineering, Biomedical

Effect of leaflet-to-chordae contact interaction on computational mitral valve evaluation

Yonghoon Rim et al.

BIOMEDICAL ENGINEERING ONLINE (2014)

Article Physics, Applied

Shallow acceptor complexes in p-type ZnO

J. G. Reynolds et al.

APPLIED PHYSICS LETTERS (2013)

Article Physics, Applied

Photopatternable nano-composite (SU-8/ZnO) thin films for piezo-electric applications

Manoj Kandpal et al.

APPLIED PHYSICS LETTERS (2012)

Article Engineering, Electrical & Electronic

Effect of High Aspect Ratio Filler on Dielectric Properties of Polymer Composites: A Study on Barium Titanate Fibers and Graphene Platelets

Zepu Wang et al.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2012)

Review Veterinary Sciences

The mechanobiology of mitral valve function, degeneration, and repair

Jennifer M. Richards et al.

JOURNAL OF VETERINARY CARDIOLOGY (2012)

Article Polymer Science

Electrostrictive polymer composite for energy harvesters and actuators

Pierre-Jean Cottinet et al.

JOURNAL OF POLYMER ENGINEERING (2011)

Article Chemistry, Multidisciplinary

Muscle-Driven In Vivo Nanogenerator

Zhou Li et al.

ADVANCED MATERIALS (2010)

Article Physics, Applied

Improving the d33 and g33 properties of 0-3 piezoelectric composites by dielectrophoresis

D. A. van den Ende et al.

JOURNAL OF APPLIED PHYSICS (2010)

Article Chemistry, Multidisciplinary

Converting Biomechanical Energy into Electricity by a Muscle-Movement-Driven Nanogenerator

Rusen Yang et al.

NANO LETTERS (2009)

Article Materials Science, Multidisciplinary

Identification of two hydrogen donors in ZnO

E. V. Lavrov et al.

PHYSICAL REVIEW B (2009)

Article Physics, Applied

Hydrogen diffusion behavior in N doped ZnO: First-principles study

J. Hu et al.

JOURNAL OF APPLIED PHYSICS (2008)

Article Chemistry, Physical

Cellular Level Biocompatibility and Biosafety of ZnO Nanowires

Zhou Li et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2008)

Article Physics, Atomic, Molecular & Chemical

Piezoelectricity of ZnO films prepared by sol-gel method

Ke-ming Zhang et al.

CHINESE JOURNAL OF CHEMICAL PHYSICS (2007)

Article Materials Science, Multidisciplinary

Temperature dependence of raman scattering in ZnO

Ramon Cusco et al.

PHYSICAL REVIEW B (2007)

Article Materials Science, Multidisciplinary

Mechanical properties and crack growth behavior in poled ferroelectric PMN-PZT ceramics

S. Jiansirisomboon et al.

CURRENT APPLIED PHYSICS (2006)

Article Physics, Condensed Matter

Incorporation of nitrogen acceptors in ZnO powder

D Pfisterer et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2006)

Article Dentistry, Oral Surgery & Medicine

Diffuse reflectance of short-fiber-reinforced composites aligned by an electric field

WM Chirdon et al.

DENTAL MATERIALS (2006)

Article Materials Science, Multidisciplinary

Dominant hydrogen-oxygen complex in hydrothermally grown ZnO

EV Lavrov et al.

PHYSICAL REVIEW B (2005)

Article Physics, Applied

Structure modification of 0-3 piezoelectric ceramic/polymer composites through dielectrophoresis

SA Wilson et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2005)

Article Physics, Condensed Matter

Bound exciton and donor-acceptor pair recombinations in ZnO

BK Meyer et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2004)

Article Engineering, Electrical & Electronic

High frequency 1-3 composite transducer fabricated using sol-gel derived lead-free BNBT fibers

DY Wang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2004)

Review Physics, Condensed Matter

Zinc oxide nanostructures: growth, properties and applications

ZL Wang

JOURNAL OF PHYSICS-CONDENSED MATTER (2004)

Article Physics, Condensed Matter

Infrared absorption spectroscopy of hydrogen-related defects in ZnO

EV Lavrov

PHYSICA B-CONDENSED MATTER (2003)

Article Physics, Applied

Raman scattering in ZnO thin films doped with Fe, Sb, Al, Ga, and Li

C Bundesmann et al.

APPLIED PHYSICS LETTERS (2003)

Article Physics, Applied

Optical properties of ZnO rods formed by metalorganic chemical vapor deposition

BP Zhang et al.

APPLIED PHYSICS LETTERS (2003)

Article Physics, Applied

Electrical activity of nitrogen acceptors in ZnO films grown by metalorganic vapor phase epitaxy

JF Rommeluère et al.

APPLIED PHYSICS LETTERS (2003)

Article Physics, Multidisciplinary

Hydrogen local vibrational modes in zinc oxide

NH Nickel et al.

PHYSICAL REVIEW LETTERS (2003)

Article Materials Science, Multidisciplinary

Hydrogen-related defects in ZnO studied by infrared absorption spectroscopy -: art. no. 165205

EV Lavrov et al.

PHYSICAL REVIEW B (2002)