☆ 4.7 Article

Thermal diffusion upon magnetic field convection of nano-enhanced phase change materials in a permeable wavy cavity with crescent-shaped partitions

CASE STUDIES IN THERMAL ENGINEERING (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Effect of magnetic field and thermal radiation on natural convection in a square cavity filled with TiO2 nanoparticles using Tiwari-Das nanofluid model

P. Sreedevi et al.

Summary: A numerical investigation was conducted to study the natural convection heat transfer of TiO2-EG nanofluid inside a square cavity under the influence of a magnetic field and thermal radiation. The results showed that the magnetic field and radiation parameters have a significant effect on the temperature and heat transfer performance of the TiO2-EG nanofluid.

ALEXANDRIA ENGINEERING JOURNAL (2022)

Add to Collection

Article Thermodynamics

Double-diffusive convection between two different phases in a porous infinite-shaped enclosure suspended by nano encapsulated phase change materials

Abdelraheem M. Aly et al.

Summary: This paper focuses on numerical simulation using a mesh-free method for a double-diffusive flow in a porous infinite-shaped enclosure suspended by NEPCM. The effects of various parameters on the phase change zone, materials tracking, temperature, velocity field, and concentration were discussed, showing the importance of fusion temperature and Stefan number in controlling the phase change zone.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

The magnetic field on a nanofluid flow within a finned cavity containing solid particles

Abdelraheem M. Aly et al.

Summary: The ISPH method is used to analyze the effects of a magnetic field on thermosolutal convection of solid particles spreading within a finned cavity. The simulations show that solid particles tend to move towards the upper part of the cavity and the fins on the upper wall play a role in adjusting the spread of the particles. The blending between solid and fluid particles is influenced by an increase in the Hartman parameter, while the Soret and Dufour numbers reduce the blending of solid particles within a nanofluid flow.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Experimental study on thermophysical properties of water-based nanoemulsion of n-eicosane PCM

C. J. Ho et al.

Summary: The thermophysical properties of water-based nanoemulsion of n-eicosane were experimentally measured in this study. Results showed that higher mass fraction of n-eicosane suspensions within the phase change region led to higher latent heat value and specific heat. Additionally, as the temperature increased, thermal conductivity improved, but decreased significantly during the melting process of n-eicosane suspensions.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Energy cost and ef fi ciency analysis of greenhouse heating system enhancement using phase change material: An experimental study

Shurong Yan et al.

Summary: The increasing production of greenhouse gases and fossil fuels prices are driving decision-makers in communications to implement energy sources more efficiently. Greenhouses play a significant role in food production and require improvements in heating systems, with the possibility of reusing waste heat through PCM explored in this study. The use of PCM HRS can significantly reduce gas consumption and lead to energy savings that return the initial investment within four months.

RENEWABLE ENERGY (2021)

Add to Collection

Article Thermodynamics

Double rotations between an inner wavy shape and a hexagonal-shaped cavity suspended by NEPCM using a time-fractional derivative of the ISPH method

Abdelraheem M. Aly et al.

Summary: A transient two-dimensional ISPH method based on the time-fractional derivative was used to model thermosolutal convection of NEPCM in an annulus, exploring the effects of various parameters on temperature, heat capacity, concentration, and velocity fields. The study found that double rotations and frequency parameters significantly impact nanofluid speed, while an increase in Rayleigh number enhances nanofluid movements within the annulus.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Heat transfer enhancement of nano-encapsulated phase change material (NEPCM) using metal foam for thermal energy storage

W. Q. Li et al.

Summary: The Foam/NEPCM composite material enhances thermal energy storage by combining the thermal enhancement of metal foam and latent heat absorption of NEPCM, resulting in lower wall temperature and more uniform internal temperature compared to pure NEPCM. The study also found that the lower porosity Foam/NEPCM composite has lower heated wall temperature and internal temperature near the heated wall due to its higher thermal conductivity and area/volume ratio.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Engineering, Chemical

Thermal-natural convection and entropy production behavior of hybrid nanoliquid flow under the effects of magnetic field through a porous wavy cavity embodies three circular cylinders

A. Sattar Dogonchi et al.

Summary: This study investigated the behavior of hybrid nanofluid flow, thermal characteristics, and entropy generation analysis in a porous enclosure containing three circular cylinders with magnetic field effects using a finite element approach. The results showed that changing the relative position of the hot cylinder has a significant impact on nanoliquid flow patterns, convective heat transfer, and entropy generation characteristics.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Article Thermodynamics

Numerical study on buoyant convection and thermal radiation in a cavity with various thermal sources and Cattaneo-Christov heat flux

S. Sivasankaran et al.

Summary: The study analyzes the rate of change of thermal and flow transfer inside an enclosed box under the effect of thermal radiation and convective flow driven by buoyancy force. Different positions of the heater and cooler on the sidewalls of the region are varied to examine the heat transfer rate. The results show that the middle location of the partial heater/cooler in the cavity produces enhanced heat transfer rate.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

The magnetic power on natural convection of NEPCM suspended in a porous annulus between a hexagonal-shaped cavity and dual curves

Abdelraheem M. Aly et al.

Summary: This study investigates the magnetic effects on thermosolutal convection of nano-encapsulated phase change material inside a porous annulus using the ISPH method. The results show that the lengths of the inner dual curves and fusion temperature significantly influence the contours of heat capacity, temperature, streamlines, and concentration in the annulus.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Double-diffusive convection of a rotating circular cylinder in a porous cavity suspended by nano-encapsulated phase change materials

Zehba Raizah et al.

Summary: The fusion temperature controls the location and intensity of the phase change zone inside the cavity; the melting-solidification zones are not changing under variations in the buoyancy ratio parameter; an increase in radius of the circular cylinder enhances double diffusive convection and reduces the intensity of the phase change zone.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Mixed convection analysis in a split lid-driven trapezoidal cavity having elliptic shaped obstacle

S. Saqib Shah et al.

Summary: This study explores the thermal performance of nanofluid enclosed by a split lid-driven trapezoidal cavity with an elliptic shaped obstacle. Various parameters such as Richardson number, Lewis number, Reynolds number, and buoyancy ratio are analyzed for their effects on velocity, temperature, and concentration profiles. The findings indicate that Lewis number has a significant impact on isotherms and concentration, while smaller buoyancy ratios result in maximum heat transfer near the lid walls.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Engineering, Chemical

Free convection and second law scrutiny of NEPCM suspension inside a wavy-baffle-equipped cylinder under altered Fourier theory

M. K. Nayak et al.

Summary: This study simulated the free convection and entropy generation of nano-encapsulated phase change material (NEPCM) inside a circular cold cylinder using the finite element method, considering the effects of magnetic field and heat flux model. Changes in baffle amplitude and magnetic field strength affect the movement of NEPCMs and entropy generation, while an increase in baffle size alters the flow patterns and velocities.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Thermal performance of heat sink using nano-enhanced phase change material (NePCM) for cooling of electronic components

Anuj Kumar et al.

Summary: The present experimental study focuses on the thermal performance of nano-enhanced phase change material (NePCM) based thermal energy storage system for cooling electronic components. Different heat sink (HS) configurations were studied, with the HSSPF involving PCM/NePCM showing the best thermal performance. The addition of CuO nanoparticle beyond a certain concentration decreased the HS performance considerably.

MICROELECTRONICS RELIABILITY (2021)

Add to Collection

Article Thermodynamics

Multi-criteria investigation of a pumped thermal electricity storage (PTES) system with thermal integration and sensible heat storage

Guido Francesco Frate et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Physics, Multidisciplinary

The enthalpy-based lattice Boltzmann method (LBM) for simulation of NePCM melting in inclined elliptical annulus

Mahmoud Jourabian et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

Add to Collection

Article Energy & Fuels

Performance evaluation of melting/solidification mechanism in a variable wave-length wavy channel double-tube latent heat storage system

Amin Shahsavar et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Review Thermodynamics

Nanoparticles enhanced phase change materials (NePCMs)-A recent review

Syeda Laraib Tariq et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Natural convection and entropy generation of a nanofluid around a circular baffle inside an inclined square cavity under thermal radiation and magnetic field effects

Zhixiong Li et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Study of thermal and hydrodynamic characteristics of water-nano-encapsulated phase change particles suspension in an annulus of a porous eccentric horizontal cylinder

Mohammad Ghalambaz et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Engineering, Multidisciplinary

Numerical simulation on convection of non-Newtonian fluid in a porous enclosure with non-uniform heating and thermal radiation

S. Sivasankaran et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

Add to Collection

Article Energy & Fuels

Energy efficiency optimization of the waste heat recovery system with embedded phase change materials in greenhouses: A thermo-economic-environmental study

Shu-Rong Yan et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Thermodynamics

Effects of porous medium and wavy surface on heat transfer and entropy generation of Cu-water nanofluid natural convection in square cavity containing partially-heated surface

Ching-Chang Cho

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Multidisciplinary Sciences

Numerical study of heat generating γ Al2O3- H2O nanofluid inside a square cavity with multiple obstacles of different shapes

N. Vishnu Ganesh et al.

HELIYON (2020)

Add to Collection

Article Thermodynamics

Free convection heat transfer analysis of a suspension of nano-encapsulated phase change materials (NEPCMs) in an inclined porous cavity

Mohammad Ghalambaz et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

Add to Collection

Article Multidisciplinary Sciences

Free convection of a suspension containing nano-encapsulated phase change material in a porous cavity; local thermal non-equilibrium model

Mohammad Ghalambaz et al.

HELIYON (2020)

Add to Collection

Article Materials Science, Multidisciplinary

MHD mixed convection and entropy generation in a lid-driven cavity with rotating cylinders filled by a nanofluid using two phase mixture model

Pouya Barnoon et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

Add to Collection

Article Thermodynamics

Experimental investigation of paraffin nano-encapsulated phase change material on heat transfer enhancement of pulsating heat pipe

Reza Heydarian et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Engineering, Chemical

Effect of local thermal non-equilibrium model on natural convection in a nanofluid-filled wavy-walled porous cavity containing inner solid cylinder

Ammar Alsabery et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Nano-encapsulated phase change materials prepared by one-step interfacial polymerization for thermal energy storage

Jian Shi et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Add to Collection

Article Thermodynamics

Two phase natural convection and thermal radiation of Non-Newtonian nanofluid in a porous cavity considering inclined cavity and size of inside cylinders

Pouya Barnoon et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Mathematics, Applied

Entropy generation analysis of different nanofluid flows in the space between two concentric horizontal pipes in the presence of magnetic field: Single-phase and two-phase approaches

Pouya Barnoon et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2019)

Add to Collection

Article Thermodynamics

Effect of MHD on the flow and heat transfer characteristics of nanofluid in a grooved channel with internal heat generation

Mohammad Sadegh Dehghani et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

Add to Collection

Article Thermodynamics

Investigation of finned heat sink performance with nano enhanced phase change material (NePCM)

Milad Bayat et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)

Add to Collection

Article Thermodynamics

Analysis of mixed convection of nanofluid in a 3D lid-driven trapezoidal cavity with flexible side surfaces and inner cylinder

Fatih Selimefendigil et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Effect of thermal dispersion on transient natural convection in a wavy-walled porous cavity filled with a nanofluid: Tiwari and Das' nanofluid model

M. A. Sheremet et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Thermodynamics

Natural convection in a square enclosure with two inner circular cylinders positioned at different vertical locations

Yong Gap Park et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Thermodynamics

Natural convection in a square enclosure with a hot source

M. Paroncini et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2009)

Add to Collection

Article Thermodynamics

A numerical study of natural convection in a square enclosure with a circular cylinder at different vertical locations

B. S. Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2008)

Add to Collection

Article Thermodynamics

Numerical analysis of convection conduction and radiation using a non-equilibrium model in a square porous cavity

Irfan Anjum Badruddin et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2007)

Add to Collection

Article Thermodynamics

Heat transfer in porous cavity under the influence of radiation and viscous dissipation

IA Badruddin et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.