☆ 4.7 Article

Adhesion in Perovskite Solar Cell Multilayer Structures

ACS APPLIED ENERGY MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Effects of temperature-dependent burn-in decay on the performance of triple cation mixed halide perovskite solar cells

Yusuf A. Olanrewaju et al.

Summary: This paper investigates the temperature-dependent degradation of perovskite solar cells (PSCs) and reveals that thermally induced degradation gradually leads to the decay of photocurrent density and a rapid reduction in power conversion efficiency. Scanning electron microscopy (SEM) images show thermally induced delamination and microvoid formation between the layers. The formation of these defects is associated with the degradation of solar cell performance characteristics.

AIP ADVANCES (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Understanding the effects of annealing temperature on the mechanical properties of layers in FAI-rich perovskite solar cells

O. Oyelade et al.

Summary: This paper uses a combination of experiments and theory to study the effects of annealing temperature on the mechanical properties of hybrid organic-inorganic perovskites. It proposes a mechanism-based strain gradient theory to explain the influence of annealing temperature on the mechanical properties of the film.

AIP ADVANCES (2022)

Add to Collection

Article Engineering, Mechanical

Interfacial fracture of hybrid organic-inorganic perovskite solar cells

Reisya Ichwani et al.

Summary: The study investigates the interfacial robustness of perovskite solar cells and explores the interfacial fracture mechanisms under different mode mixities. Optical and scanning electron microscopy are used to reveal crack/microstructure interactions, discussing the implications for the development of perovskite solar cells with robust interfaces.

EXTREME MECHANICS LETTERS (2022)

Add to Collection

Article Energy & Fuels

Tin Oxide Modified Titanium Dioxide as Electron Transport Layer in Formamidinium-Rich Perovskite Solar Cells

Richard K. Koech et al.

Summary: Incorporating tin oxide (SnO2) into titanium dioxide (TiO2) improved the optoelectronic properties of electron transport layers (ETL) in perovskite solar cells (PSCs). The PSC devices with 0.2 SnO2 content in the ETL showed an average PCE increase of approximately 7.16% compared to those with pristine TiO2 ETL. This enhancement in PCE was attributed to improved electron extraction and transport abilities revealed by TRPL and EIS studies.

ENERGIES (2021)

Add to Collection

Article Multidisciplinary Sciences

Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability

Zhenghong Dai et al.

Summary: The use of iodine-terminated self-assembled monolayer (I-SAM) in perovskite solar cells (PSCs) leads to increased adhesion toughness at the interface, improved power conversion efficiency, reduced hysteresis, and enhanced operational stability. This is attributed to a decrease in hydroxyl groups at the interface and higher interfacial toughness achieved with I-SAM treatment.

SCIENCE (2021)

Add to Collection

Editorial Material Chemistry, Physical

Development of perovskite solar cells with >25% conversion efficiency

Gi-Hwan Kim et al.

Summary: Improving carrier management with electron transfer and the perovskite layer is crucial for achieving high-efficiency perovskite solar cells, as discussed in the study published in the February 25, 2021 issue of Nature by Seo et al.

JOULE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

A study of the effects of a thermally evaporated nanoscale CsBr layer on the optoelectronic properties and stability of formamidinium-rich perovskite solar cells

Richard K. Koech et al.

Summary: Incorporating cesium (Cs) into the perovskite layer via thermal evaporation of a thin layer of CsBr in a formamidinium (FA)-rich mixed halide perovskite film can enhance the stability and power conversion efficiency (PCE) of perovskite solar cells (PSCs). The thickness of the CsBr layer has significant effects on the microstructural and optoelectronic properties of the perovskite film, ultimately leading to improved photovoltaic performance. Specifically, a 50 nm CsBr layer in the perovskite absorber demonstrated a 15% increase in PCE and retained nearly 70% of its initial PCE value after 120 days of storage.

AIP ADVANCES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Annealing effects on interdiffusion in layered FA-rich perovskite solar cells

D. O. Oyewole et al.

Summary: In this study, the effects of annealing on the interdiffusion of constituent elements in efficient formamidinium-based PSCs were systematically investigated. The results showed that annealing at different temperatures can cause both upward and downward diffusion of elements in the perovskite films, affecting their microstructures and optoelectronic properties. The findings provide insights for the design of PSCs with enhanced photoconversion efficiencies and stability.

AIP ADVANCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A Multi-Electron Transporting Layer for Efficient Perovskite Solar Cells

Kritsada Hongsith et al.

Summary: The study found that the multi-electron transporting layer consisting of SnO2/SnOx double-layer shows good performance for perovskite solar cells, with enhanced efficiency attributed to decreased charge transport resistance and increased charge recombination resistance. The R-ct and R-rec parameters from electrochemical impedance spectroscopy (EIS) technique can explain the efficiency enhancement in PSC devices.

COATINGS (2021)

Add to Collection

Article Multidisciplinary Sciences

Pressure-Assisted Fabrication of Perovskite Solar Cells

O. Oyelade et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Bromine Doping of MAPbI3Films Deposited via Chemical Vapor Deposition Enables Efficient and Photo-Stable Self-Powered Photodetectors

Sri Venkata Narayana Pammi et al.

ADVANCED OPTICAL MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress in Organic Electron Transport Materials in Inverted Perovskite Solar Cells

Ahmed Ali Said et al.

SMALL (2019)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Mechanical properties of hybrid organic-inorganic perovskites

Li-Jun Ji et al.

COORDINATION CHEMISTRY REVIEWS (2019)

Add to Collection

Review Chemistry, Physical

Frontiers, opportunities, and challenges in perovskite solar cells: A critical review

Mohammed Istafaul Haque Ansari et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Thermo-mechanical behavior of organic-inorganic halide perovskites for solar cells

Cristina Ramirez et al.

SCRIPTA MATERIALIA (2018)

Add to Collection

Article Multidisciplinary Sciences

Novel Physical Vapor Deposition Approach to Hybrid Perovskites: Growth of MAPbI3 Thin Films by RF-Magnetron Sputtering

Sara Bonomi et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Chemistry, Physical

Predominant Stable MAPbI3 Films Deposited via Chemical Vapor Deposition: Stability Studies in Illuminated and Darkened States Coupled with Temperature under an Open-Air Atmosphere

S. V. N. Pammi et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Influence of the Nature of A Cation on Dynamics of Charge Transfer Processes in Perovskite Solar Cells

Pankaj Yadav et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Improving Interfacial Charge Recombination in Planar Heterojunction Perovskite Photovoltaics with Small Molecule as Electron Transport Layer

Ning Wang et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Engineering, Mechanical

Mechanical integrity of solution-processed perovskite solar cells

Nicholas Rolston et al.

EXTREME MECHANICS LETTERS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Comparative Study of Vapor- and Solution-Crystallized Perovskite for Planar Heterojunction Solar Cells

Tian Du et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Electro-spray deposition of a mesoporous TiO2 charge collection layer: toward large scale and continuous production of high efficiency perovskite solar cells

Min-cheol Kim et al.

NANOSCALE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Advances in cellular nanoscale force detection and manipulation

Shuchen Hsieh et al.

Arabian Journal of Chemistry (2015)

Add to Collection

Article Physics, Applied

Adhesion in flexible organic and hybrid organic/inorganic light emitting device and solar cells

D. Yu et al.

JOURNAL OF APPLIED PHYSICS (2014)

Add to Collection

Article Chemistry, Physical

Role of the Selective Contacts in the Performance of Lead Halide Perovskite Solar Cells

Emilio J. Juarez-Perez et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Physics, Applied

Insights on the influence of surface roughness on photovoltaic properties of state of the art copper indium gallium diselenide thin films solar cells

Z. Jehl et al.

JOURNAL OF APPLIED PHYSICS (2012)

Add to Collection

Article Physics, Applied

Adhesion in organic electronic structures

T. Tong et al.

JOURNAL OF APPLIED PHYSICS (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.