Related references
Note: Only part of the references are listed.Mold-opening foam injection molded strong PP/CF foams with high EMI shielding performance
Ya Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Effect of microstructure induced by microcellular injection molding on electromagnetic interference shielding properties
Ya Liu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Lightweight investigation of long chain branching polypropylene/cellulose nanofiber composite foams
Rie Nobe et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Theoretical and experimental investigation of the particle size distribution and magnetic properties of the PP + FE3O4 nanocomposites
Mahammadali A. Ramazanov et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2020)
Multifunctional microcellular PVDF/Ni-chains composite foams with enhanced electromagnetic interference shielding and superior thermal insulation performance
Hongming Zhang et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Electrically electromagnetic interference shielding microcellular composite foams with 3D hierarchical graphene-carbon nanotube hybrids
Hongming Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Ultra-lightweight, super thermal-insulation and strong PP/CNT microcellular foams
Jinchuan Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Highly expanded, highly insulating polypropylene/polybutelene-terephthalate composite foams manufactured by nano-fibrillation technology
Chongxiang Zhao et al.
MATERIALS & DESIGN (2020)
Morphological evolution of PLA foam from microcellular to nanocellular induced by cold crystallization assisted by supercritical CO2
Jingyue Ni et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2020)
Lightweight and tough PP/talc composite foam with bimodal nanoporous structure achieved by microcellular injection molding
Jinchuan Zhao et al.
MATERIALS & DESIGN (2020)
Nonlinear influences of process parameters on mechanical properties of physically foamed, fiber-reinforced polypropylene parts
Clemens Kastner et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Effect of crystallization on tensile mechanical properties of PET foam: Experiment and model prediction
Shun Yao et al.
POLYMER TESTING (2020)
Highly Compressible Polymer Composite Foams with Thermal Heating-Boosted Electromagnetic Wave Absorption Abilities
Biao Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Ultra-high expansion linear polypropylene foams prepared in a semi-molten state under supercritical CO2
Junji Hou et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2019)
Effect of Mold Temperature on the Impact Behavior and Morphology of Injection Molded Foams Based on Polypropylene Polyethylene-Octene Copolymer Blends
Santiago Munoz-Pascual et al.
POLYMERS (2019)
Accurate theoretical modeling of cell growth by comparing with visualized data in high-pressure foam injection molding
Chongda Wang et al.
EUROPEAN POLYMER JOURNAL (2019)
Numerical analysis of the effect of the local variation of viscosity on bubble growth and deformation in polymer foaming
Mohammadmehdi Ataei et al.
JOURNAL OF RHEOLOGY (2019)
A Novel Hybrid Foaming Method for Low-Pressure Microcellular Foam Production of Unfilled and Talc-Filled Copolymer Polypropylenes
Gethin Llewelyn et al.
POLYMERS (2019)
Investigation of the influence of pressurized CO2 on the crystal growth of poly(l-lactic acid) by using an in situ high-pressure optical system
Lei Zhang et al.
SOFT MATTER (2019)
Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding
Guilong Wang et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Microcellular PP/GF composites: Morphological, mechanical and fracture characterization
J. Gomez-Monterde et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
A facile approach towards fabrication of lightweight biodegradable poly (butylene succinate)/carbon fiber composite foams with high electrical conductivity and strength
Tairong Kuang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Development of high thermal insulation and compressive strength BPP foams using mold-opening foam injection molding with in-situ fibrillated PTFE fibers
Jinchuan Zhao et al.
EUROPEAN POLYMER JOURNAL (2018)
Scalable Fabrication of Thermally Insulating Mechanically Resilient Hierarchically Porous Polymer Foams
Ali Rizvi et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Effect of surface modification on the dispersion, rheological behavior, crystallization kinetics, and foaming ability of polypropylene/cellulose nanofiber nanocomposites
Long Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Non-isothermal crystallization kinetics of polypropylene/short glass fibre/multiwalled carbon nanotube composites
Nanoth Rasana et al.
RSC ADVANCES (2018)
Role of elastic strain energy in cell nucleation of polymer foaming and its application for fabricating sub-microcellular TPU microfilms
Guilong Wang et al.
POLYMER (2017)
Conductive network formation and destruction in polypropylene/carbon nanotube composites via crystal control using supercritical carbon dioxide
Yasamin Kazemi et al.
POLYMER (2017)
Mechanical and morphological properties of injection molded linear and branched-polylactide (PLA) nanocomposite foams
Naqi Najafi et al.
EUROPEAN POLYMER JOURNAL (2015)
Microcellular to nanocellular polymer foams: Progress (2004-2015) and future directions - A review
Chimezie Okolieocha et al.
EUROPEAN POLYMER JOURNAL (2015)
Multifunctional polypropylene composites produced by incorporation of exfoliated graphite nanoplatelets
Kyriaki Kalaitzidou et al.
CARBON (2007)