4.8 Article

Ni/Li antisite induced disordered passivation layer for high-Ni layered oxide cathode material

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

The Role of Ni and Co in Suppressing O-Loss in Li-Rich Layered Cathodes

Edouard Boivin et al.

Summary: It is shown that almost complete eradication of oxygen loss with Ni substitution is due to the presence of a less lithium-rich, more nickel-rich rocksalt shell at the surface of the particles compared with the bulk. Thinner rocksalt shell forms in the case of Ni and Co co-substitution, leading to more abundant oxygen loss. Co doping does not result in a surface shell yet it still suppresses oxygen loss, indicating that two mechanisms exist for oxygen loss suppression.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Engineering, Environmental

Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+- conductor coating

Sidra Jamil et al.

Summary: The Ni-rich layered oxide cathode material, LiNi0.87Co0.1Al0.03O2, modified with amorphous Li+-ion conductor Li2O-BPO4 coating, shows improved cycling stability and rate capability, making it a promising candidate for high-voltage applications in lithium ion batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries

Chao Xu et al.

Summary: A structure-driven degradation mechanism is proposed for Ni-rich layered cathode material NMC811, in which a proportion of the material exhibits a lowered accessible state of charge and becomes fatigued after repetitive cycling. This degradation is attributed to high interfacial lattice strain between the reconstructed surface and the bulk layered structure above a distinct threshold.

NATURE MATERIALS (2021)

Article Chemistry, Physical

Microstrain Alleviation in High-Energy Ni-Rich ma NCMA Cathode for Long Battery Life

Hoon-Hee Ryu et al.

Summary: By incorporating a hybrid structure design, the Li[Ni0.9Co0.045Mn0.045Al0.01] cathode achieves enhanced microstructure, leading to improved stability and cycling life of the battery.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

New Insight into Microstructure Engineering of Ni-Rich Layered Oxide Cathode for High Performance Lithium Ion Batteries

Chul-Ho Jung et al.

Summary: Phosphorous- and boron-doped Ni-rich layered cathodes with a textured microstructure show enhanced cycle stability compared to undoped cathodes. The boron-doped cathode not only suppresses microcrack formation during cycling but also exhibits better cycle stability due to its primary particle morphology that is resistant to oxygen evolution.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Robust Surface Reconstruction Induced by Subsurface Ni/Li Antisites in Ni-Rich Cathodes

Xinyan Li et al.

Summary: The study reports that surface reconstruction induced by specific antisites can suppress the outward migration of transition metals and oxygen ions, achieving a stable surface structure for layered oxide cathodes of lithium-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Engineering, Environmental

Enhanced cycling stability of Sn-doped Li[Ni0.90Co0.05Mn0.05]O-2 via optimization of particle shape and orientation

Trung Thien Nguyen et al.

Summary: The proposed Sn substitution method improves the cycling stability of Ni-rich layered cathodes by effectively suppressing microcrack formation and propagation. The microstructure-modified Sn-NCM90 cathode shows enhanced cycling performance with high capacity retention after multiple cycles.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Materials Science, Multidisciplinary

A review on the stability and surface modification of layered transition-metal oxide cathodes

Ju-Myung Kim et al.

Summary: The increasing demand for high energy density batteries and stable electrochemical performance has drawn attention to the promising candidates of layered transition metal oxides, facing challenges in stability. Various surface modification strategies have been pursued to enhance the stability of these cathode materials.

MATERIALS TODAY (2021)

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

Article Engineering, Environmental

Dual cationic modified high Ni-low co layered oxide cathode with a heteroepitaxial interface for high energy-density lithium-ion batteries

Sidra Jamil et al.

Summary: The study demonstrates that dual cation doping with Zirconium and Gallium significantly enhances the electrochemical performance of high Ni-low Co cathodes, leading to better cyclability and capacity retention for NCMZG compared to traditional NCM.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

New Class of Ni-Rich Cathode Materials Li[NixCoyB1-x-y]O2 for Next Lithium Batteries

Hoon-Hee Ryu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Physical

Improving LiNi0.9Co0.08Mn0.02O2's cyclic stability via abating mechanical damages

Zhongmin Ren et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Enhanced cycling stability of nickel-rich layered oxide by tantalum doping

Sidra Jamil et al.

JOURNAL OF POWER SOURCES (2020)

Article Chemistry, Physical

Problems and their origins of Ni-rich layered oxide cathode materials

Sheng S. Zhang

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Restraining the polarization increase of Ni-rich and low-Co cathodes upon cycling by Al-doping

Chunfang Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Surface Ni-rich engineering towards highly stable Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials

Hongfei Zheng et al.

ENERGY STORAGE MATERIALS (2020)

Review Chemistry, Multidisciplinary

Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control

Jiaxin Zheng et al.

ACCOUNTS OF CHEMICAL RESEARCH (2019)

Editorial Material Chemistry, Physical

What Limits the Capacity of Layered Oxide Cathodes in Lithium Batteries?

Hui Zhou et al.

ACS ENERGY LETTERS (2019)

Article Chemistry, Physical

An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries

Hongyang Li et al.

CHEMISTRY OF MATERIALS (2019)

Article Chemistry, Physical

Tungsten doping for stabilization of Li[Ni0.90Co0.05Mn0.05]O2 cathode for Li-ion battery at high voltage

Geon-Tae Park et al.

JOURNAL OF POWER SOURCES (2019)

Article Chemistry, Physical

Stable heteroepitaxial interface of Li-rich layered oxide cathodes with enhanced lithium storage

Zhengping Ding et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

Elucidation of LixNi0.8Co0.15Al0.05O2 Redox Chemistry by Operando Raman Spectroscopy

Eibar Flores et al.

CHEMISTRY OF MATERIALS (2018)

Article Materials Science, Multidisciplinary

Electronic and optical properties of monolayer black phosphorus induced by bi-axial strain

Zhongjing Xie et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Article Chemistry, Multidisciplinary

Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteries

U. -H. Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Surface Doping to Enhance Structural Integrity and Performance of Li-Rich Layered Oxide

Shuai Liu et al.

ADVANCED ENERGY MATERIALS (2018)

Article Electrochemistry

Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Multidisciplinary Sciences

Intrinsic Origins of Crack Generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 Layered Oxide Cathode Material

Jin-Myoung Lim et al.

SCIENTIFIC REPORTS (2017)

Article Nanoscience & Nanotechnology

Theoretical Prediction of Surface Stability and Morphology of LiNiO2 Cathode for Li Ion Batteries

Eunseog Cho et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Physical

A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries

Arumugam Manthiram et al.

ENERGY STORAGE MATERIALS (2017)

Article Chemistry, Multidisciplinary

Tuning of Thermal Stability in Layered Li(NixMnyCoz)O2

Jiaxin Zheng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Review Energy & Fuels

Long-range, low-cost electric vehicles enabled by robust energy storage

Ping Liu et al.

MRS ENERGY & SUSTAINABILITY (2015)

Article Chemistry, Physical

High-Energy Layered Oxide Cathodes with Thin Shells for Improved Surface Stability

Hyung-Joo Noh et al.

CHEMISTRY OF MATERIALS (2014)

Article Multidisciplinary Sciences

Unlocking the Potential of Cation-Disordered Oxides for Rechargeable Lithium Batteries

Jinhyuk Lee et al.

SCIENCE (2014)

Article Chemistry, Physical

Effects of aluminum on the structural and electrochemical properties of LiNiO2

M Guilmard et al.

JOURNAL OF POWER SOURCES (2003)

Article Electrochemistry

Surface characterization of electrodes from high power lithium-ion batteries

AM Andersson et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)