☆ 4.7 Article

Modified couple stress and thickness-stretching included formulation of a sandwich micro shell subjected to electro-magnetic load resting on elastic foundation

DEFENCE TECHNOLOGY (2022)

Related references

Note: Only part of the references are listed.

Article Mathematics, Applied

Artificial neural networking (ANN) analysis for heat and entropy generation in flow of non-Newtonian fluid between two rotating disks

Tie-Hong Zhao et al.

Summary: Mixed convection is a heat transport mechanism in thermodynamic systems that involves the motion of fluid particles influenced by both gravity and external forces. This study focuses on the mixed convective flow of Ree-Eyring fluid between two rotating disks, considering the effects of porosity and velocity slip. The energy equation is modeled with various factors such as heat generation/absorption, dissipation, radiative heat flux, and Joule heating. The results obtained are compared with previous studies, showing good agreement. Interesting physical phenomena such as skin friction and heat transfer are also numerically calculated.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2023)

Add to Collection

Article Mathematics

On the Bounds of the Perimeter of an Ellipse

Tiehong Zhao et al.

Summary: New bounds for the perimeter of an ellipse are presented in this paper, representing improvements upon previous results.

ACTA MATHEMATICA SCIENTIA (2022)

Add to Collection

Article Thermodynamics

Experimental investigations on the thermal superposition effect of multiple hotspots for embedded microfluidic cooling

Yuxin Ye et al.

Summary: This paper introduces the concept of thermal superposition effect, which can effectively reduce the average temperature of multi-hotspot chips by optimizing the superposition factor. The factor also enables prediction of the temperature change of hotspots.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Engineering, Environmental

Lanthanum carbonate grafted ZSM-5 for superior phosphate uptake: Investigation of the growth and adsorption mechanism

Yi Yang et al.

Summary: Efficient phosphate removal from wastewater was achieved using the LC-ZSM-5 adsorbent, with an adsorption capacity of 91.2 mg-PO43-/g. Thermodynamic and kinetic studies revealed that phosphate adsorption on LC-ZSM-5 is a spontaneous exothermic process with chemical adsorption playing a crucial role. Regeneration study demonstrated the satisfactory regeneration ability of LC-ZSM-5 for potential industrial applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Thermodynamics

Embedded cooling method with configurability and replaceability for multi-chip electronic devices

Nan Zhang et al.

Summary: This study demonstrates an embedded cooling method with configurability and replaceability for multi-chip electronic devices. Experimental results show that the cooling effect of chips in the array is not affected by arrangements under the same conditions.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Mechanical

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method

Debin Sun et al.

Summary: The study explores fretting fatigue life prediction of dovetail structure in high temperature environment, proposing a new model that considers temperature effect and introducing a criterion for crack initiation failure in fretting fatigue tests. Experimental results show that the new model has high life prediction ability.

ENGINEERING FAILURE ANALYSIS (2022)

Add to Collection

Article Engineering, Mechanical

Fatigue life analysis of aero-engine blades for abrasive belt grinding considering residual stress

Guijian Xiao et al.

Summary: This study focuses on grinding of aero-engine blades, proposes a life prediction algorithm considering residual stress, validates the effectiveness of the method through experiments and simulations, and presents a residual stress equivalent calibration method.

ENGINEERING FAILURE ANALYSIS (2022)

Add to Collection

Article Engineering, Civil

Nonlinear in-plane instability of the confined FGP arches with nanocomposites reinforcement under radially-directed uniform pressure

Xinhui Xiao et al.

Summary: This paper investigates the nonlinear buckling of functionally graded porous (FGP) arches reinforced with nanocomposites. Analytical and numerical methods are used to obtain the loading capacity and confinement effect, and parametric evaluations are conducted to examine the effects of geometric shapes of the nanocomposites and interface friction.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Mathematics, Interdisciplinary Applications

NUMERICAL SOLUTION OF TRAVELING WAVES IN CHEMICAL KINETICS: TIME-FRACTIONAL FISHERS EQUATIONS

Fuzhang Wang et al.

Summary: This paper presents a numerical solution method for nonlinear time-fractional Fisher equations using a local meshless method combined with explicit difference scheme. Radial basis functions are used to compute space derivatives, and the Caputo derivative scheme is used for time-fractional integration. The accuracy is evaluated using the maximum error norm, and the method is validated with non-rectangular domains.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2022)

Add to Collection

Article Mathematics, Interdisciplinary Applications

SOME RECENT DEVELOPMENTS ON DYNAMICAL PLANCK CONSTANT OVER TWO PI-DISCRETE FRACTIONAL TYPE INEQUALITIES IN THE FRAME OF NONSINGULAR AND NONLOCAL KERNELS

Saima Rashid et al.

Summary: This study explores the applications of discrete fractional calculus in inequalities, proposing novel versions of reverse Minkowski and related Holder-type inequalities, as well as certain variations for discrete AB-fractional operators with (h) over bar -discrete generalized Mittag-Leffler kernels. The discretization proposed is a new form of existing operators that can be used to efficiently describe dynamics in short time domains by leveraging intriguing features of chaotic systems.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Virtual synchronous generator of PV generation without energy storage for frequency support in autonomous microgrid

Cheng Zhong et al.

Summary: A novel virtual synchronous generator (VSG) control method is introduced in this study to provide frequency support in PV generation without the need for additional energy storage. The VSG control utilizes pre-defined power versus voltage curve to reserve part of the active power from PV generation.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2022)

Add to Collection

Article Energy & Fuels

Fastest-growing source prediction of US electricity production based on a novel hybrid model using wavelet transform

Weibiao Qiao et al.

Summary: A novel combination prediction model based on wavelet transform, long short-term memory, and stacked autoencoder was proposed to predict the future growth trend of electricity production. Empirical results showed that this combination model outperformed benchmark models, indicating its potential in electricity production forecasting.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Parametric study on interfacial crack propagation in solid oxide fuel cell based on electrode material

Jiamiao Xie et al.

Summary: This study investigates the influence of electrode material properties on the interfacial crack propagation in solid oxide fuel cells. Through experimental data, material models and optimization schemes are established to reduce the possibility of delamination, providing guidance for improving the stability and integrity of solid oxide fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Renewable quantile regression for streaming datasets

Kangning Wang et al.

Summary: The paper proposes a novel online renewable quantile regression strategy that updates the resulting estimator with current data and summary statistics of historical data, addressing the challenge of implementing quantile regression in a streaming data environment. The new method is computationally efficient, not storage-intensive, and performs well in numerical experiments.

KNOWLEDGE-BASED SYSTEMS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Ni/Ni3Al interface-dominated nanoindentation deformation and pop-in events

Jinjie Zhou et al.

Summary: Nickel-based single crystal alloys have excellent mechanical properties due to their unique structure and interface. By simulating nanoindentation and microstructural evolution, the hardness of the Ni3Al phase was found to be the highest and dislocations can penetrate the interface into the Ni phase. Furthermore, the starting point of adhesion force recovery was found to be related to the material's elastic recovery, and the variation of potential energy was related to stacking fault energy.

NANOTECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A Transversely Isotropic Magneto-Electro-Elastic Circular Kirchhoff Plate Model Incorporating Microstructure Effect

Wei Shen et al.

Summary: A non-classical model for transversely isotropic magneto-electro-elastic circular Kirchhoff plates is established based on the extended modified couple stress theory, and its validity is verified by numerically solving the static bending problem. The results show that the magneto-electro-elastic coupling effect plays a significant role in the performance of the plate.

ACTA MECHANICA SOLIDA SINICA (2022)

Add to Collection

Article Engineering, Multidisciplinary

Dynamic response analysis of vehicle and asphalt pavement coupled system with the excitation of road surface unevenness

Xianyong Ma et al.

Summary: This study aims to solve the dynamic responses of the vehicle and asphalt pavement coupled system considering road surface unevenness and deformation. An advanced solving procedure is proposed by decoupling the system into two subsystems and solving them iteratively until the surface deformation converges. The dynamic responses of vehicle and pavement are computed using finite difference method and integral transform techniques, and the accuracy and efficiency of the proposed solution are verified through finite element simulation.

APPLIED MATHEMATICAL MODELLING (2022)

Add to Collection

Article Mathematics, Interdisciplinary Applications

SOME FURTHER EXTENSIONS CONSIDERING DISCRETE PROPORTIONAL FRACTIONAL OPERATORS

Saima Rashid et al.

Summary: This paper investigates the dynamic features of discrete fractional calculus (DFC), specifically focusing on discrete fractional systems with complex dynamics. By considering discrete PI-proportional fractional operator, the author derives novel versions of reverse Minkowski and Holder-type inequalities, contributing to major results. The proposed system exhibits an intriguing feature characterized by nabla fractional sums. The author reports novel special cases to assess system dynamics and highlight existing outcomes. The method is efficient in analyzing system complexity and can be applied to investigate the existence and uniqueness of fractional difference equations.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Modelling and Analysis of Electromagnetic Time Scale Voltage Variation Affected by Power Electronic Interfaced Voltage Regulatory Devices

Lei Shang et al.

Summary: This paper establishes an instantaneous voltage model to illustrate the dynamic characteristics of grid voltage affected by power-electronic interfaced voltage regulatory devices with two typical categories of control systems. The dynamic process of grid voltage is divided into three stages and various factors on the dynamic process are analyzed. The stiffness characteristic is proposed as an evaluation metric for the effects of different control structures of power electronic interfaced voltage regulatory devices.

IEEE TRANSACTIONS ON POWER SYSTEMS (2022)

Add to Collection

Review Engineering, Mechanical

Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies

Teng Gao et al.

Summary: Fiber-reinforced composites have been widely used in aviation and aerospace industries due to their high-strength performance. However, their complex structure makes them difficult to machine. This review summarizes the progress in understanding the damage formation mechanisms and the strategies to suppress them during milling and grinding of fiber-reinforced composites. The review covers mechanisms of milling damage, grinding mechanisms, and various suppression strategies such as ultrasonic vibration-assisted machining, cryogenic cooling, minimum quantity lubrication (MQL), and tool optimization design.

FRONTIERS OF MECHANICAL ENGINEERING (2022)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Study on Date-Jimbo-Kashiwara-Miwa Equation with Conformable Derivative Dependent on Time Parameter to Find the Exact Dynamic Wave Solutions

Md Ashik Iqbal et al.

Summary: In this article, exact dynamical wave solutions to the Date-Jimbo-Kashiwara-Miwa equation with conformable derivative are constructed using the two-variable G'/G, 1/G-expansion method. The solutions are classified and analyzed, and the effect of the fractional parameter on the solutions is discussed.

FRACTAL AND FRACTIONAL (2022)

Add to Collection

Article Engineering, Mechanical

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Shunchu Liu et al.

Summary: The study shows that laser surface textures can reduce the coefficients of friction, enhance wear resistance, and improve the dynamical performance of frictional surfaces. The surface with micro circular dimples in diameter of 150 mu m or textured area density of 25% has the best tribological and dynamical performance. Adding graphene to the lubrication oil effectively reduces frictional vibrations and noise, and surface textures enhance the frictional noise reduction performance of lubrication.

LUBRICANTS (2022)

Add to Collection

Article Construction & Building Technology

Temperature gradient modeling of a steel box-girder suspension bridge using Copulas probabilistic method and field monitoring

Haiping Zhang et al.

Summary: A novel copula-based probabilistic model was proposed for analyzing temperature difference in a long-span suspension bridge's steel box girder. By investigating correlation between adjacent temperature differences and selecting optimal model using AIC, the study established the optimal joint function for steel box girder's temperature difference. Using Monte Carlo method, the structure's temperature gradient model was extrapolated for the service life of the bridge.

ADVANCES IN STRUCTURAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Research on recognition of gas saturation in sandstone reservoir based on capture mode

Junjie Dong et al.

Summary: Pulsed neutron technology has been extensively used in China to monitor the remaining oil saturation of formations, especially in addressing issues like porosity and residual oil saturation after casing. By studying influencing factors of the capture mode in sandstone reservoirs, it can be applied for gas reservoir identification research and quantitative evaluation of gas saturation.

APPLIED RADIATION AND ISOTOPES (2021)

Add to Collection

Article Mathematics, Applied

Vibration analysis of carbon nanotube-reinforced composite microbeams

Omer Civalek et al.

Summary: This article investigates the free vibration behavior of CNTRC microbeams with CNTs distributed in a polymeric matrix using four different reinforcement patterns. Material properties and microstructure-dependent governing differential equations are derived based on the rule of mixture and various beam theories. The obtained vibration equation is solved using Navier's solution method, and the effects of length scale parameter, length/thickness ratio, volume fraction, and reinforcement pattern on frequencies are examined. It is observed that X-Beam has the highest frequencies, while O-Beam has the lowest ones, and the size effect is more pronounced when the thickness of the beam is close to the length scale parameter.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Critical Temperatures for Vibrations and Buckling of Magneto-Electro-Elastic Nonlocal Strain Gradient Plates

Giovanni Tocci Monaco et al.

Summary: This work presents an analytical method for studying the vibrations and buckling behavior of nano-plates in a hygro-thermal environment. Nonlinear von Karman terms and strain gradient nonlocal theory are included in the analysis to consider the effects of nano-scale on magneto-electro-elastic plates, along with critical temperatures for vibrations and buckling problems under hygro-thermal loads.

NANOMATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

Constituting abrupt magnetic flux density change for power density improvement in electromagnetic energy harvesting

Zhongjie Li et al.

Summary: The study focuses on how abrupt magnetic flux density changes influence the electric outputs of electromagnetic energy harvesters. It is found that the cubic-magnet array configuration yields the best performance in terms of output voltage, power density, and charging rates, demonstrating the importance of magnet volume in optimizing the harvester's performance.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Investigation of transient magnetoelectric response of magnetostrictive/piezoelectric composite applicable for lightning current sensing

Hai Zhou et al.

Summary: This study investigates the transient magnetoelectric response of the symmetric TerfenolD/PZT/Terfenol-D laminate structure under different transient current driving, revealing damping oscillation phenomena. The results suggest that the ME composite is an ideal lightning current sensing device.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection

Article Crystallography

On the Bending and Vibration Analysis of Functionally Graded Magneto-Electro-Elastic Timoshenko Microbeams

Jun Hong et al.

Summary: A new magneto-electro-elastic functionally graded Timoshenko microbeam model is developed in this paper, incorporating microstructure and multi-field coupling effects. Parametric studies demonstrate the impact of microstructure and material thin layers on the model.

CRYSTALS (2021)

Add to Collection

Article Engineering, Mechanical

Hybrid Dynamic Modeling and Analysis of High-Speed Thin-Rimmed Gears

Changzhao Liu et al.

Summary: A hybrid dynamic model of high-speed thin-rimmed gears was developed in this study, taking into consideration variations in meshing teeth and distribution of meshing forces between teeth during gear operation. Dynamic analysis revealed the impacts of flexible gear bodies, high speed, and tooth errors on system dynamics and tooth load distribution. The model was compared with current reference and pure finite element methods to validate its effectiveness.

JOURNAL OF MECHANICAL DESIGN (2021)

Add to Collection

Article Construction & Building Technology

Fatigue reliability evaluation of aging prestressed concrete bridge accounting for stochastic traffic loading and resistance degradation

Yuan Luo et al.

Summary: This study investigated the probabilistic fatigue damage on aging PC bridges considering the impact of stochastic traffic loading and corrosion, establishing a stochastic traffic model and a three-stage traffic growth model. Numerical results showed that the presence of cracks in rebar increased stress amplitude by 1.53 times and led to a decrease in fatigue life by 68 years, while the three-stage traffic growth models resulted in 25 years shorter fatigue life compared to a linear traffic growth model. Additionally, the corrosion effect was found to reduce the fatigue life of the bridges by 44 years.

ADVANCES IN STRUCTURAL ENGINEERING (2021)

Add to Collection

Article Engineering, Manufacturing

Electrohydrodynamic printing of a dielectric elastomer actuator and its application in tunable lenses

Liang Jiang et al.

Summary: Inspired by the architecture of the human eye, a tunable optical lens with a fully 3D printed inhomogeneous structure was successfully fabricated, exhibiting a 29% change in focal length under dynamic driving voltage control. The lens displayed excellent stability when the focal length was tuned for 200 cycles, mimicking the auto adjusting principle of the human eye and showing potential applications in various fields such as imaging and bifocal technology.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Investigation of frequency-up conversion effect on the performance improvement of stack-based piezoelectric generators

Yan Peng et al.

Summary: The paper investigates the influence of frequency-up conversion effect on high-performance energy harvesting using piezoelectric stack generators. Experimental results show significant enhancement in instantaneous power and average power with frequency-up conversion. The voltage response cycles consist of high-frequency high-amplitude oscillation and low-frequency low-amplitude harmonic vibration.

RENEWABLE ENERGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

A Highly Stretchable and Sensitive Strain Sensor Based on Dopamine Modified Electrospun SEBS Fibers and MWCNTs with Carboxylation

Bangze Zhou et al.

Summary: A new type of strain sensor based on elastomer/carbon nanotube composite fiber is reported in this study, which exhibits high sensitivity and a large workable strain range, demonstrating excellent performance and sensitivity in monitoring small and large strains.

ADVANCED ELECTRONIC MATERIALS (2021)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Enhancement in Thermal Energy and Solute Particles Using Hybrid Nanoparticles by Engaging Activation Energy and Chemical Reaction over a Parabolic Surface via Finite Element Approach

Yu-Ming Chu et al.

Summary: This report discusses the flow of Powell-Eyring fluid mixed with hybrid nanoparticles over a melting parabolic stretched surface. Flow rheology expressions have been derived under boundary layer theory and transformed into associated ODEs using similarity transformation. The applicability and effectiveness of FEM in solving highly nonlinear problems is demonstrated, showing that the methodology can be easily implemented in MAPLE 18.0.

FRACTAL AND FRACTIONAL (2021)

Add to Collection

Article Engineering, Multidisciplinary

Free vibration and buckling analyses of magneto-electro-elastic FGM nanoplates based on nonlocal modified higher-order sinusoidal shear deformation theory

Krzysztof Kamil Zur et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

On the effect of viscoelasticity on behavior of gyroscopes

Shahriar Dastjerdi et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A transversely isotropic magneto-electro-elastic Timoshenko beam model incorporating microstructure and foundation effects

G. Y. Zhang et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Physics, Multidisciplinary

Deep Learning for Feynman's Path Integral in Strong-Field Time-Dependent Dynamics

Xiwang Liu et al.

PHYSICAL REVIEW LETTERS (2020)

Add to Collection

Article Mathematics, Applied

On some refinements for inequalities involving zero-balanced hypergeometric function

Tie-Hong Zhao et al.

AIMS MATHEMATICS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Size-dependent electro-thermo-mechanical analysis of multilayer cantilever microactuators by Joule heating using the modified couple stress theory

Zou-Qing Tan et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants

Teng Gao et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A comprehensive investigation into the impact of nonlocal strain gradient and modified couple stress models on the rates of surface energy layers of BiTiO3-CoFe2O4 nanoplates: a vibration analysis

Morteza Karimi et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets

Mostafa Habibi et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Nonlocal strain gradient shell model for axial buckling and postbuckling analysis of magneto-electro-elastic composite nanoshells

S. Sahmani et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Engineering, Civil

Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone

Ben Mou et al.

ENGINEERING STRUCTURES (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air

Jianchao Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials

Yaogang Wang et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2018)

Add to Collection

Article Thermodynamics

Buckling analysis of nano-scale magneto-electro-elastic plates using the nonlocal elasticity theory

Weon-Tae Park et al.

ADVANCES IN MECHANICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Manufacturing

Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions

Min Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

Add to Collection

Article Engineering, Mechanical

Analytical modeling for nonlinear vibration analysis of partially cracked thin magneto-electro-elastic plate coupled with fluid

Shashank Soni et al.

NONLINEAR DYNAMICS (2017)

Add to Collection

Article Mechanics

Nonlinear buckling analysis of magneto-electro-elastic CNT-MT hybrid nanoshells based on the nonlocal continuum mechanics

A. Farajpour et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Reflection and transmission of plane wave in multilayered nonlocal magneto-electro-elastic plates immersed in liquid

Jiangyi Chen et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Engineering, Aerospace

Bending analysis of embedded carbon nanotubes resting on an elastic foundation using strain gradient theory

Bekir Akgoz et al.

ACTA ASTRONAUTICA (2016)

Add to Collection

Article Engineering, Aerospace

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Li Benkai et al.

CHINESE JOURNAL OF AERONAUTICS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing the Mechanical Properties and Formability of Low Carbon Steel with Dual-Phase Microstructures

M. Habibi et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

Add to Collection

Article Engineering, Mechanical

A novel microstructure-dependent shear deformable beam model

Bekir Akgoz et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

Add to Collection

Article Engineering, Multidisciplinary

Thermo-mechanical buckling behavior of functionally graded microbeams embedded in elastic medium

Bekir Akgoz et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2014)

Add to Collection

Article Engineering, Civil

A complete set of equations for piezo-magneto-elastic analysis of a functionally graded thick shell of revolution

Mohammad Arefi

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2014)

Add to Collection

Article Engineering, Multidisciplinary

A size-dependent shear deformation beam model based on the strain gradient elasticity theory

Bekir Akgoz et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2013)

Add to Collection

Article Mechanics

Thermoelastic free vibration and dynamic behaviour of an FGM doubly curved panel via the analytical hybrid Laplace-Fourier transformation

Y. Kiani et al.

ACTA MECHANICA (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.