☆ 4.7 Article

Convective-radiative thermal investigation of a porous dovetail fin using spectral collocation method

AIN SHAMS ENGINEERING JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Thermal analysis of a convective-conductive-radiative annular porous fin with variable thermal parameters and internal heat generation

V. Venkitesh et al.

Summary: In this study, the thermal characteristics of annular porous fins with different cross-sections and internal heat generation were investigated using the homotopy perturbation method. The effects of pores and thermal parameters on the temperature distribution and fin efficiency were visually presented.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Add to Collection

Article Engineering, Mechanical

Hydrothermal analysis on non-Newtonian nanofluid flow of blood through porous vessels

S. Hosseinzadeh et al.

Summary: This paper investigates the flow of non-Newtonian blood fluid with nanoparticles inside a vessel with a porous wall in the presence of a magnetic field. Various parameters such as magnetic field and porosity are studied to analyze their effects on velocity, temperature, and concentration profiles. Three different viscosity models are employed for innovation. The governing equations are solved using Akbari-Ganji's Method (AGM) analytical method, and the Finite Element Method (FEM) is used for better representation. The results demonstrate that the increase in Gr number, porosity, and negative pressure leads to higher blood velocity, while an increase in magnetic field intensity decreases the blood velocity.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Thermal analysis of an annular fin under multi-boiling heat transfer coefficient using differential transform method with Pade approximant (DTM-Pade)

R. S. Varun Kumar et al.

Summary: The study examines the temperature distribution and thermal stresses of an annular fin with internal heat generation under multi-boiling heat transfer using the differential transform method (DTM)-Pade approximant. Results show that the temperature profile of the fin increases with the impact of thermal conductivity parameter and heat generation parameter while decreases for thermo-geometric parameter. The radial and tangential stress distribution are higher in cases of radiation heat transfer compared to other situations.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

Add to Collection

Article Physics, Multidisciplinary

Thermal stress and temperature distribution of an annular fin with variable temperature-dependent thermal properties and magnetic field using DTM-Pade approximant

G. Sowmya et al.

Summary: This study examines the thermal distribution within a rectangular profiled annular fin with the presence of a magnetic field and internal heat generation, considering the linear and nonlinear temperature-dependent thermal conductivity and heat transfer coefficient. The nondimensionalized heat transfer equation is solved analytically and numerically, and the effects of non-dimensional parameters on temperature gradient and thermal stresses are explained using graphs.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Add to Collection

Article Thermodynamics

Thermal analysis of moving porous fin wetted by hybrid nanofluid with trapezoidal, concave parabolic and convex cross sections

S. Hosseinzadeh et al.

Summary: This study investigates the thermal performance of a moving porous fin wetted with hybrid nanofluid with different cross-sections in the presence of a magnetic field. Three different cross-sections (trapezoidal, concave parabolic, and convex) are used as an innovation. The impact of various characteristics on the dimensionless temperature is thoroughly examined, and the results show that Akbari-Ganji's method has good accuracy in solving heat transfer equations related to moving porous fin.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

LSM and DTM-Pade approximation for the combined impacts of convective and radiative heat transfer on an inclined porous longitudinal fin

Fuzhang Wang et al.

Summary: This study investigates the temperature variation of an inclined porous longitudinal fin using analytical methods, considering convective radiative heat transfer. The simulation results show that an increase in the conduction-convection variable, porosity variable, and radiation number decreases the thermal field, while the heat generation constant causes an increase in the thermal field. Furthermore, the thermal behavior of the fin weakens as the angle increases.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Effect of electromagnetic field on the thermal performance of longitudinal trapezoidal porous fin using DTM-Pade approximant

R. S. Varun Kumar et al.

Summary: This study investigates the thermal distribution of porous fins with an internal heat source and an electromagnetic field. By using dimensional analysis and an analytical solution method, the effects of various non-dimensional parameters on the temperature gradient of the fin are explored.

HEAT TRANSFER (2022)

Add to Collection

Article Chemistry, Physical

Analytical solution for temperature equation of a fin problem with variable temperature-dependent thermal properties: Application of LSM and DTM-Pade approximant

Weaam Alhejaili et al.

Summary: This study explains the temperature variation in a longitudinal fin with linear and nonlinear temperature-dependent thermal conductivities and heat transfer coefficient, considering radiative heat flux and convective heat transfer. The results show that an increase in convection and radiation mechanism leads to a significant decrease in the thermal field, and the internal development of heat affects the thermal distribution in the fin.

CHEMICAL PHYSICS LETTERS (2022)

Add to Collection

Article Thermodynamics

Thermal performance of optimum exponential fin profiles subjected to a temperature jump

Mustafa Turkyilmazoglu

Summary: This study aims to analyze the heat transfer efficiency of exponential fins by introducing temperature jump parameter. The temperature jump affects the distribution of temperature over the fin surface and ultimately influences the fin efficiency. Optimization of base heat transfer rate is conducted to evaluate the optimal dimensions of base fin thickness and fin length for exponential fins.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Add to Collection

Article Physics, Multidisciplinary

Exploration of transient heat transfer through a moving plate with exponentially temperature-dependent thermal properties

R. S. Varun Kumar et al.

Summary: The present research investigates the transient temperature distribution in a moving plate with exponentially temperature-dependent thermal conductivity and heat transfer coefficient. The study finds that the transient thermal distribution decreases significantly with an increase in the convection-conduction parameter and the same trend is observed for the radiation-conduction parameter. Furthermore, the results demonstrate that the transient thermal distribution through a moving plate enhances gradually as the plate moves faster.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Add to Collection

Article Multidisciplinary Sciences

Exploration of Temperature Distribution through a Longitudinal Rectangular Fin with Linear and Exponential Temperature-Dependent Thermal Conductivity Using DTM-Pade Approximant

Ravikumar Shashikala Varun Kumar et al.

Summary: This study investigates the thermal distribution and efficiency of a longitudinal rectangular fin, considering exponentially and linearly varying temperature-dependent thermal conductivity, and compares the results. The study also examines the thermal distribution using different fin materials. The effects of dimensionless parameters on the fin efficiency and temperature profile are discussed, and thermal simulation is performed using ANSYS software.

SYMMETRY-BASEL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Novel thermal aspects of hybrid nanofluid flow comprising of manganese zinc ferrite MnZnFe2O4, nickel zinc ferrite NiZnFe2O4 and motile microorganisms

Sohail Ahmad et al.

Summary: This paper examines the innovative attributes of hybrid nanofluids, specifically Manganese zinc ferrite (MnZnFe2O4) and Nickel zinc ferrite (NiZnFe2O4), in the bio-convective flow of motile gyrotactic microorganisms. The results demonstrate that the use of hybrid nanofluids can enhance heat transfer rate and is significant for the design and application of thermal systems.

AIN SHAMS ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Heat transport investigation of hybrid nanofluid (Ag-CuO) porous medium flow: Under magnetic field and Rosseland radiation

Ali Hassan et al.

Summary: The study focuses on analyzing the impact of magnetic field and radiation on the heat and mass transfer of two different hybrid nanofluids, revealing that one of the hybrid nanofluids exhibits superior performance and suggesting its more frequent use.

AIN SHAMS ENGINEERING JOURNAL (2022)

Add to Collection

Article Thermodynamics

Investigation of mixture fluid suspended by hybrid nanoparticles over vertical cylinder by considering shape factor effect

Kh. Hosseinzadeh et al.

Summary: This study investigates the flow of a mixture of water and ethylene glycol with hybrid nanoparticles over a vertical stretching cylinder, considering the effects of magnetic field, thermal radiation, viscous dissipation, and natural convection. Novelty lies in the exploration of different shape factors and their impact on dimensionless velocity and temperature profiles for single and hybrid nanofluids. Results show significant differences in velocity and temperature profiles based on nanoparticle shape and external parameters such as magnetic field and radiation.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Sinc collocation approach through thermal analysis of porous fin with magnetic field

M. Nabati et al.

Summary: The study explores the potential of porous fins to enhance thermal performance in traditional fin applications, incorporating factors such as magnetic fields, radiation heat transfer, and porous media.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Thermal analysis of a moving fin using the radial basis function approximation

Maryam Fallah Najafabadi et al.

Summary: The study analyzed the heat transfer and temperature distribution in a moving fin, finding that increasing thermal conductivity leads to higher conduction heat transfer and dimensionless temperature, while increasing sink temperature results in a rise in ambient temperature. Adjusting parameters such as N-c and N-r can alter the temperature distribution profile.

HEAT TRANSFER (2021)

Add to Collection

Article Thermodynamics

Differential transformation method to determine heat transfer in annular fins

Deepak Umrao Sarwe et al.

Summary: This paper investigates the thermal attributes and heat transfer of annular fins with various applications. Through experiments and graphical analysis, the study reveals the effects of variable thermal conductivity parameters and thermogeometric parameters on the thermal performance of fins.

HEAT TRANSFER (2021)

Add to Collection

Article Thermodynamics

Heat transfer hybrid nanofluid (1-Butanol/MoS2-Fe3O4) through a wavy porous cavity and its optimization

Kh. Hosseinzadeh et al.

Summary: The study shows that Nuave is directly proportional to Rayleigh and nanoparticle shape factor, while inversely related to Hartmann and porosity. The results indicate that the shape factor parameter significantly affects heat transfer performance, contributing 55.44% to the average Nusselt number.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Add to Collection

Article Thermodynamics

Optimization of hybrid nanoparticles with mixture fluid flow in an octagonal porous medium by effect of radiation and magnetic field

V Thirunavukkarasu et al.

Summary: The study investigated the hydrothermal behavior of a hybrid nanofluid with MoS2-TiO2 hybrid nanoparticles in a cavity enclosure, showing that an increase in Rayleigh number from 10 to 100 led to a 61.82% improvement in average Nusselt number. Results indicate that the Rayleigh number has the most significant contribution to the achieved equation, accounting for approximately 61.88%.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Thermal management of parabolic pin fin subjected to a uniform oncoming airflow: optimum fin dimensions

Mustafa Turkyilmazoglu

Summary: A concave-parabolic pin fin's thermal performance is analyzed in the presence of oncoming airflow, with the study showing significant impact of airflow magnitude and fin shape parameter on cooling efficiency. Optimum fin dimensions are identified by maximizing heat transfer rate, with findings revealing significant influence of Peclet number variation on spine size.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Simultaneous estimation of heat generation and magnetic field in a radial porous fin from surface temperature information

Ranjan Das et al.

Summary: This paper demonstrates an inverse methodology for predicting internal heat generation and magnetic field strength in a radial porous fin using the Artificial Bee Colony (ABC) algorithm. The study found a linear relationship between magnetic field strength, heat generation, and temperature distribution. The ABC algorithm accurately reconstructs conditions and establishes relationships between parameters with high accuracy.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Investigation of magnetohydrodynamic nanofluid flow contain motile oxytactic microorganisms over rotating cone

Amir Reza Mogharrebi et al.

Summary: The study examines the convective heat transfer properties of magnetohydrodynamics nanofluid flow with motile microorganisms passing through a rotating cone. By changing Peclet number and magnetic parameter, the study observed variations in microorganism concentration and temperature distribution.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2021)

Add to Collection

Article Engineering, Multidisciplinary

Hybridized two phase ferromagnetic nanofluid with NiZnFe2O4 and MnZnFe2O4

Hassan Tahir et al.

Summary: Heat transfer analysis is essential in electronic and engineering equipment, with researchers studying the use of ferrite nanoparticles in base fluids to create hybrid ferromagnetic nanofluids with improved heat transfer performance. The hybrid nanofluids show better heat transfer performance compared to simple two phase flow.

AIN SHAMS ENGINEERING JOURNAL (2021)

Add to Collection

Article Thermodynamics

Thermal distribution through a moving longitudinal trapezoidal fin with variable temperature-dependent thermal properties using DTM-Pade approximant

M. C. Jayaprakash et al.

Summary: The study analyzed the thermal distribution of a convective-radiative longitudinal trapezoidal moving fin with an internal heat source, emphasizing the influence of several dimensionless parameters. The results show that as certain parameters increase, the thermal distribution through the fin gradually decreases or increases.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Significance of surface-catalyzed reactions in SiO2- H2O nanofluid flow through porous media

Hassan Waqas et al.

Summary: This study investigates the radiative impact and heat source-sink considerations on SiO2 water-based nanoliquid flowing through porous media, exploring the effects of different shape factors on velocity and thermal field through mathematical modeling and graphical analysis.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article Physics, Multidisciplinary

Entropy generation of three-dimensional Bodewadt flow of water and hexanol base fluid suspended by Fe3O4 and MoS2 hybrid nanoparticles

Kh Hosseinzadeh et al.

Summary: The study reveals that entropy generation increases with the Eckert number, but decreases with a growth in nanoparticle volume fraction and shape factor. Furthermore, hexanol has higher irreversibility rate, Bejan number, and Nusselt number compared to water. The nanoparticle volume fraction has the most significant impact on the skin friction coefficient.

PRAMANA-JOURNAL OF PHYSICS (2021)

Add to Collection

Article

Investigation of mixture-based dusty hybrid nanofluid flow in porous media affected by magnetic field using RBF method

H. Talebi Rostami et al.

International Journal of Ambient Energy (2021)

Add to Collection

Article Engineering, Multidisciplinary

Chemically reactive flow of hyperbolic tangent fluid flow having thermal radiation and double stratification embedded in porous medium

Mumtaz Khan et al.

Summary: This assessment addresses the thermal and solutal stratifications in mixed convection flow under the influence of a magnetic field in a porous medium. Through theoretical analysis and suitable transformations, significant outcomes for various dimensionless parameters were obtained and compared with previous studies to validate the results. The study concludes that certain parameters, such as chemical reaction and mixed convection, can affect the undesirable skin friction in engineering and real-world problems.

AIN SHAMS ENGINEERING JOURNAL (2021)

Add to Collection

Article

Investigation of Micropolar Hybrid Nanofluid (Iron Oxide–Molybdenum Disulfide) Flow Across a Sinusoidal Cylinder in Presence of Magnetic Field

Kh. Hosseinzadeh et al.

International Journal of Applied and Computational Mathematics (2021)

Add to Collection

Article Physics, Applied

Analytical solution of nonlinear differential equations two oscillators mechanism using Akbari-Ganji method

Saman Hosseinzadeh et al.

Summary: This study introduced several potent analytical methods used in the past decade to solve nonlinear differential equations and demonstrated the application of the Akbari-Ganji method in solving mechanical oscillator movement problems. The sensitivity analysis showed that the mass has the highest sensitivity on oscillation frequency, and increasing alpha and beta will lead to an increase in the system velocity and acceleration slope.

MODERN PHYSICS LETTERS B (2021)

Add to Collection

Article Physics, Multidisciplinary

Heat transfer analysis of longitudinal fins of trapezoidal and dovetail profile on an inclined surface

B. J. Gireesha et al.

Summary: The study investigated the thermal behavior of trapezoidal and dovetail profiled longitudinal fin structures on an inclined surface, with results showing that the fin profile and internal heat generation have the greatest impact on heat transfer rate.

PHYSICA SCRIPTA (2021)

Add to Collection

Article Engineering, Mechanical

Physical insights into the heat and mass transfer in Casson hybrid nanofluid flow induced by a Riga plate with thermophoretic particle deposition

J. K. Madhukesh et al.

Summary: The study focuses on the laminar, steady flow of a Casson hybrid nanoliquid induced by a Riga plate in the presence of a porous medium. Numerical solutions are obtained using a fourth fifth-order Runge-Kutta-Fehlberg process, showing the influences of parameters on flow fields.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Prediction of Heat-Generation and Electromagnetic Parameters from Temperature Response in Porous Fins

Ranjan Das et al.

Summary: The study proposes the use of combined electric and magnetic fields for enhanced heat transfer in a porous fin system, with an inverse estimation technique and ABC algorithm employed to determine interior thermal energy production and field strengths. Results indicate that the thermomagnetic field governs heat transport phenomena, and the interaction between the electric field and thermal-energy-generation parameter influences the observed temperature field.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2021)

Add to Collection

Article Multidisciplinary Sciences

Two-phase flow of dusty fluid with suspended hybrid nanoparticles over a stretching cylinder with modified Fourier heat flux

R. S. Varun Kumar et al.

Summary: This study examines the influence of hybrid nanoparticles on dusty liquid flow through a stretching cylinder using the modified Fourier heat flux law and a two-phase model. The results indicate that an increase in particle mass concentration leads to a decrease in velocity and thermal gradient, while an increase in the curvature parameter enhances velocity and thermal gradient within the boundary. The use of appropriate similarity variables allows for the numerical solution of the nonlinear ODEs through the Runge-Kutta-Fehlberg method.

SN APPLIED SCIENCES (2021)

Add to Collection

Article Mathematics, Applied

Sinc-Galerkin approach for thermal analysis of moving porous fin subject to nanoliquid flow with different shaped nanoparticles

M. Nabati et al.

Summary: This article employs the Sinc-Galerkin algorithm to investigate the thermal performance of moving porous fins subject to nanoliquid flow, considering different shapes of nanoparticles. The numerical results show that spherical nanoparticles have the greatest influence on the rate of heat flux, while wet porous parameters enhance the thermal features of permeable fins.

MATHEMATICAL SCIENCES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Entropy generation and temperature-dependent viscosity in the study of SWCNT-MWCNT hybrid nanofluid

Shafiq Ahmad et al.

APPLIED NANOSCIENCE (2020)

Add to Collection

Article Engineering, Multidisciplinary

Investigation of cross-fluid flow containing motile gyrotactic microorganisms and nanoparticles over a three-dimensional cylinder

Kh Hosseinzadeh et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

Add to Collection

Article Thermodynamics

Hydrothermal analysis of MHD squeezing mixture fluid suspended by hybrid nanoparticles between two parallel plates

Sajad Salehi et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Investigation of different base fluids suspend by CNTs hybrid nanoparticle over a vertical circular cylinder with sinusoidal radius

M. Gholinia et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Add to Collection

Article Engineering, Chemical

On the Natural Convection Heat Transfer from an Inclined Surface with Porous Fins

Suhil Kiwan

TRANSPORT IN POROUS MEDIA (2019)

Add to Collection

Article Thermodynamics

A reliable convergent Adomian decomposition method for heat transfer through extended surfaces

Mustafa Turkyilmazoglu

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2018)

Add to Collection

Article Computer Science, Artificial Intelligence

Estimation of critical dimensions for a trapezoidal-shaped steel fin using hybrid differential evolution algorithm

Ranjan Das et al.

NEURAL COMPUTING & APPLICATIONS (2017)

Add to Collection

Article Thermodynamics

Spectral collocation method for transient thermal analysis of coupled conductive, convective and radiative heat transfer in the moving plate with temperature dependent properties and heat generation

Jing Ma et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

A direct solution of temperature field and physical quantities for the nonlinear porous fin problem

Mustafa Turkyilmazoglu

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2017)

Add to Collection

Article Thermodynamics

Efficiency of the Longitudinal Fins of Trapezoidal Profile in Motion

M. Turkyilmazoglu

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Thermodynamics

Spectral collocation method for radiative-conductive porous fin with temperature dependent properties

Jing Ma et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Add to Collection

Article Thermodynamics

Spectral collocation method for convective-radiative transfer of a moving rod with variable thermal conductivity

Ya-Song Sun et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

Add to Collection

Article Thermodynamics

Forward and inverse solutions of a conductive, convective and radiative cylindrical porous fin

Ranjan Das

ENERGY CONVERSION AND MANAGEMENT (2014)

Add to Collection

Article Thermodynamics

A model on the basis of analytics for computing maximum heat transfer in porous fins

Balaram Kundu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Add to Collection

Article Mathematics, Applied

Thermal analysis of a longitudinal trapezoidal fin with temperature-dependent thermal conductivity and heat transfer coefficient

F. Khani et al.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2010)

Add to Collection

Article Thermodynamics

Effect of radiative losses on the heat transfer from porous fins

Suhil Kiwan

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2007)

Add to Collection

Article Thermodynamics

Extended surface heat transfer - the dovetail fin

HJ Lane et al.

APPLIED THERMAL ENGINEERING (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.