4.7 Article

Experimental analysis on single slope solar still by the inclusion of Agar-Agar (Eucheuma) Fibre and micro Phase Change Material for the productivity enhancement

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Experimental enhancement of tubular solar still performance using rotating cylinder, nanoparticles' coating, parabolic solar concentrator, and phase change material

F. A. Essa et al.

Summary: This study improves the performance of tubular solar stills by using nanoparticle coating, parabolic solar concentrators, and phase change materials. The experimental results show that this improved design increases productivity, thermal efficiency, and reduces cost compared to conventional solar stills.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Article Thermodynamics

Investigation and performance analysis of solar still with energy storage materials: An energy- exergy efficiency analysis

Dinesh Mevada et al.

Summary: Researchers have attempted to improve the distillate yield and efficiency of solar stills by using energy storage materials. The experimental results show that solar stills with energy storage materials have higher distillate yield and efficiency compared to conventional solar stills.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Article Thermodynamics

Energy, exergy, economic and enviro-economic (4E) analysis of gravel coarse aggregate sensible heat storage-assisted single-slope solar still

R. Dhivagar et al.

Summary: In this study, energy, economic, and enviro-economic assessments were carried out on a novel solar still design with gravel coarse aggregate sensible heat storage. Experimental results showed significant improvements in energy efficiency and reduction in CO2 emissions.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article

Experimental Study on Domestic Solar Still Desalination with Cotton Gauze: An Approach to Field Model

V. Baskaran et al.

Journal of The Institution of Engineers (India): Series A (2021)

Article Energy & Fuels

Experimental analysis of innovative designs for solar still desalination technologies; An in-depth technical and economic assessment

Ali Sohani et al.

Summary: The impact of using side mirrors and sun tracking on the performance of a solar still was investigated in detail using experimental data. The study showed that employing both improvement strategies led to overall enhancement in water temperature, fresh water production, cumulative yield, daily produced distillate, daily efficiency, and cost per liter. By combining sun tracking and side mirrors, significant improvements were observed in various performance criteria, indicating the effectiveness of these strategies in enhancing the solar still's performance.

JOURNAL OF ENERGY STORAGE (2021)

Article Environmental Sciences

Performance improvements of single slope solar still using graphite plate fins and magnets

Ramasamy Dhivagar et al.

Summary: In this study, the performance of a single slope solar still was improved by utilizing graphite plate fins and magnets, which resulted in increased productivity, energy, and exergy efficiency compared to conventional solar stills under the same climate conditions. The economic and environmental benefits were evaluated over a 10-year period, showing reduced CO2 emissions and carbon credits earned with the improved solar still design. Distillate quality from both systems met the standards set by the Bureau of Indian Standards.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Environmental Sciences

Experimental investigation of single-basin solar still using solid staggered fins inserted in paraffin wax PCM bed for enhancing productivity

Subbarama Kousik Suraparaju et al.

Summary: The research found that the single-basin solar still with solid staggered pin finned absorber inserted into paraffin wax bed showed higher productivity and increased thermal efficiency at a seawater depth of 2 cm. Economic and environmental analysis revealed that the modified solar still had lower cost per liter of potable water produced and generated higher carbon credits compared to conventional solar still.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Engineering, Chemical

Graphite powder mixed with black paint on the absorber plate of the solar still to enhance yield: An experimental investigation

Hitesh Panchal et al.

Summary: The main goal of the study was to investigate how adding graphite powder and black paint to the absorber plate can increase the yield of a solar still. The modified solar still (MSS) with graphite powder mixed with black paint showed higher yield and shorter payback period compared to the Conventional solar still (CSS) used as reference.

DESALINATION (2021)

Article Engineering, Chemical

Emerging desalination technologies: Current status, challenges and future trends

Farah Ejaz Ahmed et al.

Summary: Emerging desalination technologies like forward osmosis and membrane distillation have made progress with advances in nanomaterials and electrochemical processes, but challenges remain in factors such as draw solute selection and energy consumption reduction.

DESALINATION (2021)

Article Environmental Sciences

Enhancement of the performance of hemispherical distiller via phosphate pellets as energy storage medium

Mohammed El Hadi Attia et al.

Summary: The performance of hemispherical distillers was enhanced by using phosphate pellets as a storage medium. The productivity improvement was 37.4%, 33.7%, and 47.9% for different modifications compared to the conventional hemispherical solar still. The peak enhancement was achieved with 2% phosphate pellets in the modified hemispherical solar still.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Engineering, Environmental

Performance evaluation of single slope solar still with novel pond fibres

Subbarama Kousik Suraparaju et al.

Summary: The paper discusses enhancing freshwater productivity of a single slope solar still by using naturally available dried pond fibres and investigates the impact of different numbers of fibres on the yield. Results show that the solar still with five dried pond fibres increased freshwater productivity by 29.67%, outperforming the conventional solar still by a significant margin.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Green & Sustainable Science & Technology

Thermal investigation of a solar box-type cooker with nanocomposite phase change materials using flexible thermography

G. Palanikumar et al.

Summary: In this study, three different types of solar cookers were developed, with a novel cooker integrated with nanocomposite phase change material showing improved internal temperature and thermal performance. The nanocomposite phase change material exhibited a thermal performance enhancement of 11% compared to traditional phase change material and cookers without nanocomposites.

RENEWABLE ENERGY (2021)

Article Energy & Fuels

Energy, Exergy, and Economic analysis of low thermal conductivity basin solar still integrated with Phase Change Material for energy storage

V. S. Vigneswaran et al.

Summary: The use of acrylic as the material for the basin of a solar still incorporated with PCM helped to reduce the charging time of the PCM and improve the yield of the still. The yield and exergy efficiency of the acrylic-based still were higher compared to the other types of stills tested in the study.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Analysis of solar still integrated with phase change material and pin fins as absorbing material

Jyotin Kateshia et al.

Summary: The study demonstrates that in arid areas, using phase change material and pin fins in solar desalination can increase productivity and efficiency, making it a cost-effective option.

JOURNAL OF ENERGY STORAGE (2021)

Article Engineering, Chemical

Performance enhancement of stepped basin solar still based on OSELM with traversal tree for higher energy adaptive control

A. Mohandass Gandhi et al.

Summary: Precision design of a basin solar still is usually unattainable, but coating the basin area with a nanolayer and utilizing adaptive neural network-based approaches can enhance design performance. The use of SiO2/TiO2 nanoparticles and a binary search tree can significantly improve efficiency and help find optimal costs for better-performing solar still designs.

DESALINATION (2021)

Article Environmental Sciences

Productivity enhancement of single-slope solar still with novel bottom finned absorber basin inserted in phase change material (PCM): techno-economic and enviro-economic analysis

Subbarama Kousik Suraparaju et al.

Summary: Solar still is an effective method for desalinating sea or brackish water. A novel bottom finned absorber basin was developed to improve freshwater productivity, with SSHFES showing the highest productivity compared to SSSFES and CSS. Economic analysis also showed that SSHFES is the most cost-effective option for potable water production.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Energy & Fuels

Effects of nano-enhanced phase change material and nano-coated on the performance of solar stills

Shahin Shoeibi et al.

Summary: The performance of solar desalination systems was enhanced using nanoparticles, with improved productivity and cost-effectiveness.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Half barrel and corrugated wick solar stills-Comprehensive study

M. M. Younes et al.

Summary: By adding wick material to the vertical sides of the half barrel and corrugated absorbers in the solar stills, the study managed to increase the evaporation/condensation rates of water and reduce heat losses, which led to a significant improvement in productivity. Furthermore, utilizing phase change material mixed with nanoparticles further enhanced the performance of the solar stills.

JOURNAL OF ENERGY STORAGE (2021)

Article Thermodynamics

Enhancing the solar still performance via rotating wick belt and quantum dots nanofluid

F. A. Essa et al.

Summary: Two designs of rotating wick solar stills were studied under different operating conditions, showing that the use of quantum dots nanofluid can enhance the thermal performance of LC-RWSS. Additionally, LC-RWSS demonstrated higher daily productivity and thermal efficiency compared to L-RWSS.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Thermodynamics

Productivity forecasting of solar distiller integrated with evacuated tubes and external condenser using artificial intelligence model and moth-flame optimizer

Ammar H. Elsheikh et al.

Summary: This study developed an artificial intelligence model to forecast the water yield of a modified solar distiller, using LSTM-MFO optimization and comparing it with a standalone LSTM model. Both models were trained and tested with experimental data, showing that LSTM-MFO outperformed the standalone LSTM in forecasting accuracy.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Thermodynamics

Investigation on evacuated tubes coupled solar still with condenser and fins: Experimental, exergo-economic and exergo-environment analysis

Dinesh Mevada et al.

Summary: This study compared the performance enhancement in distillate productivity between a modified solar still (MSS) and a conventional solar still (CSS) under the climatic conditions of Gandhinagar, Gujarat, India. The results showed that the MSS had higher distillate output, water temperature, and thermal efficiency, with the added benefit of generating more economic value and reducing carbon emissions through CO2 mitigation.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Review Environmental Sciences

Factors affecting the performance of a solar still and productivity enhancement methods: A review

Mohit Bhargva et al.

Summary: This paper discusses various modifications in solar still to enhance productivity, analyzes different parameters affecting passive solar still performance and their optimal values for maximum productivity, and find that water depth is an important operating parameter influencing still productivity, with maximum productivity mostly achieved at minimum water depths.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Environmental Sciences

Augmenting the productivity of stepped distiller by corrugated and curved liners, CuO/paraffin wax, wick, and vapor suctioning

Fadl Abdelmonem Essa et al.

Summary: The study investigated the effects of different basin liners, jute cloth wick, CuO/paraffin wax, and vapor suction on the thermal performance of the stepped solar still. The experimental results showed that these improvements significantly increased freshwater productivity and thermal efficiency of the solar still.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Environmental Sciences

Augmentation of freshwater productivity in a single-slope solar still using ball marbles

Subbarama Kousik Suraparaju et al.

Summary: The BMSS showed improved efficiency compared to the traditional CSS in terms of evaporation rate and productivity, resulting in higher potable water yield under both sunny and cloudy conditions. Additionally, the economic analysis revealed a shorter payback period and lower cost per litre of potable water for BMSS compared to CSS.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Materials Science, Multidisciplinary

Experimental investigation on productivity enhancement in single slope solar still using Borassus Flabellifer micro-sized particles

Arivazhagan Sampathkumar et al.

Summary: The study found that incorporating micro-sized male palm flower powder can significantly enhance the freshwater productivity of solar stills, leading to a higher water production efficiency compared to conventional solar stills.

MATERIALS LETTERS (2021)

Article Energy & Fuels

The use of passive baffles to increase the yield of a single slope solar still

D. E. Benhadji Serradj et al.

Summary: Single slope solar stills are a viable solution for producing freshwater from saline and non-potable water sources. Research suggests that using passive baffles to alter natural convection flow can enhance the yield of solar stills.

SOLAR ENERGY (2021)

Article Energy & Fuels

Improved thermo-economic performance of solar desalination via copper chips, nanofluid, and nano-based phase change material

A. W. Kandeal et al.

Summary: The study evaluated the performance difference between a modified double slope still and a conventional single slope still, with optimizations made by adding different substances. The results showed that adding copper chips and nano-enhanced materials can improve thermal conductivity and overall performance.

SOLAR ENERGY (2021)

Article Energy & Fuels

Performance enhancement of tubular solar still using nano-enhanced energy storage material integrated with v-corrugated aluminum basin, wick, and nanofluid

Gamal B. Abdelaziz et al.

Summary: By applying five alternative combinations on and under the still basin, the performance of tubular solar still can be significantly enhanced, including increased productivity and improved energy efficiency through the use of different materials and nanofluids.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Improving the tubular solar still performance using square and circular hollow fins with phase change materials

Mohamed Abdelgaied et al.

Summary: By adding copper hollow fins and PCM reservoir to the tubular solar still, the production of distilled water can be increased. Experimental results demonstrate that utilizing different shapes of hollow fins and PCM can significantly enhance the performance of the tubular solar still.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Experimental investigation of stepped solar still with phase change material and external condenser

Seyed Sina Adibi Toosi et al.

Summary: This experimental study aims to enhance the distillate of the stepped solar still through additional improvers such as PCM chambers and an external condenser. The results showed significant improvements in productivity rate with the use of external condenser and PCM in stepped solar still under Iranian climate conditions.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Improving the performance of trays solar still using wick corrugated absorber, nano-enhanced phase change material and photovoltaics-powered heaters

A. S. Abdullah et al.

Summary: The study aimed to enhance the performance of trays solar still by increasing absorber surface area, heat transfer rate, and using different configurations and materials. By combining electric heaters and PV modules, the total freshwater yield and water production were significantly improved compared to conventional solar still setups.

JOURNAL OF ENERGY STORAGE (2021)

Proceedings Paper Materials Science, Multidisciplinary

Performance evaluation of a tilted wick type solar still by using the concept of solar fraction

H. Shubhajyothi et al.

Summary: This article focuses on predicting the performance of a proposed tilted wick type solar still with better accuracy. The key parameters for the proposed model are significant for predicting thermal performance, and the suggested model has been found to be more accurate in the assessment of the system's thermal performance through experimental validation.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Green & Sustainable Science & Technology

Influence of basin metals and novel wick-metal chips pad on the thermal performance of solar desalination process

Swellam W. Sharshir et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Thermodynamics

Nanoparticles enhanced phase change materials (NePCMs)-A recent review

Syeda Laraib Tariq et al.

APPLIED THERMAL ENGINEERING (2020)

Article Environmental Sciences

Enhancing the double-slope solar still performance using simple solar collector and floatable black wicks

Yousef Abdulaziz Al-Molhem et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Article Green & Sustainable Science & Technology

Rotating discs solar still: New mechanism of desalination

F. A. Essa et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Energy & Fuels

Sensible desalting: Investigation of sensible thermal storage materials in solar stills

T. Arunkumar et al.

JOURNAL OF ENERGY STORAGE (2020)

Proceedings Paper Materials Science, Multidisciplinary

Augmentation of diurnal and nocturnal distillate of solar still having wicks in the basin and integrated with solar pond

Shivangi Bisht et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Article Engineering, Chemical

Performance analysis of single slope solar desalination setup with natural fiber

Subbarama Kousik Suraparaju et al.

DESALINATION AND WATER TREATMENT (2020)

Article Energy & Fuels

Experimental analysis of single-basin solar still with porous fins

Hitesh Panchal et al.

INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2020)

Article Engineering, Environmental

Experimental and water quality analysis of solar stills with vertical and inclined fins

Hitesh Panchal et al.

GROUNDWATER FOR SUSTAINABLE DEVELOPMENT (2020)

Review Energy & Fuels

A Review on Different Design Modifications Employed in Inclined Solar Still for Enhancing the Productivity

A. E. Kabeel et al.

JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2019)

Article Thermodynamics

Annual performance analysis of adding different nanofluids in stepped solar still

Hitesh Panchal et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Article Energy & Fuels

Augmenting the productivity of solar still using multiple PCMs as heat energy storage

V. S. Vigneswaran et al.

JOURNAL OF ENERGY STORAGE (2019)

Article Green & Sustainable Science & Technology

Effects of nanoparticle-enhanced phase change material (NPCM) on solar still productivity

D. Dsilva Winfred Rufuss et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Review Green & Sustainable Science & Technology

A review on numerous means of enhancing heat transfer rate in solar-thermal based desalination devices

Hardik K. Jani et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Thermodynamics

Energy and exergy analysis of solar stills with micro/nano particles: A comparative study

Swellam W. Sharshir et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Review Green & Sustainable Science & Technology

Thermal performance and exergy analysis of solar stills - A review

S. W. Sharshir et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Engineering, Chemical

Various methods applied to solar still for enhancement of distillate output

Hitesh Panchal et al.

DESALINATION (2017)

Article Thermodynamics

Year round performance and cost analysis of a finned single basin solar still

A. A. El-Sebaii et al.

APPLIED THERMAL ENGINEERING (2017)

Review Green & Sustainable Science & Technology

Inclined solar still designs: A review

Ajay Kumar Kaviti et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Green & Sustainable Science & Technology

Global applicability of solar desalination

Adrian Pugsley et al.

RENEWABLE ENERGY (2016)

Review Green & Sustainable Science & Technology

Thermal models of solar still-A comprehensive review

C. Elango et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Review Green & Sustainable Science & Technology

A review of solar energy driven desalination technologies

H. Sharon et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Engineering, Chemical

Energy and exergy analysis of single slope passive solar still: an experimental investigation

Sivakumar Vaithilingam et al.

DESALINATION AND WATER TREATMENT (2015)

Article Thermodynamics

Experimental Determination of Thermal Conductivity of Water-Agar Gel at Different Concentrations and Temperatures

Min Zhang et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2011)

Review Green & Sustainable Science & Technology

A review of solar thermal technologies

Mirunalini Thirugnanasambandam et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)

Article Green & Sustainable Science & Technology

Numerical study of a passive solar still with separate condenser

A. Madhlopa et al.

RENEWABLE ENERGY (2009)

Article Engineering, Chemical

Solar thermal desalination technologies

Hazim Mohameed Qiblawey et al.

DESALINATION (2008)

Article Thermodynamics

Nanoparticle-enhanced phase change materials (NEPCM) with great potential for improved thermal energy storage

J. M. Khodadadi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)

Article Engineering, Chemical

Desalination by using alternative energy: Review and state-of-the-art

E. Mathioulakis et al.

DESALINATION (2007)