4.7 Review

Towards high strength cast Mg-RE based alloys: Phase diagrams and strengthening mechanisms

Related references

Note: Only part of the references are listed.
Article Metallurgy & Metallurgical Engineering

A general thermodynamic model for the long-period stacking ordered phases in magnesium alloys

Kai Xu et al.

Summary: A thermodynamic model for long-period stacking ordered phases (LPSOs) was proposed based on Xs(6)XL(8)-type L1(2) clusters and chemical composition variations. The Mg-Y-Zn system with three LPSOs was studied using CALPHAD approach and first-principles calculations, predicting two new three-phase equilibria that were validated by key experiments. The model-based descriptions will serve as the foundation for research and development of magnesium alloys.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Materials Science, Multidisciplinary

Phases equilibrated with long-period stacking ordered phases in the Mg-rich corner of the Mg-Y-Zn system

Yongxin Ruan et al.

Summary: The experimental investigation of phase equilibria involving the long-period stacking ordered phases including 14H, 18R and 10H in the Mg-rich corner of the Mg-Y-Zn system at 400 and 500 degrees C was conducted using various microscopy techniques. The stable phases and three-phase equilibrium relationships were confirmed, and guidance for alloy composition design was provided based on modified isothermal sections.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Microstructural evolution and aging behavior of Mg-4.5Y-2.5Nd-1.0Gd-0.5Zr alloys with different Zn additions

Zheng Tian et al.

Summary: The microstructures and mechanical properties of Mg-4.5Y-2.5Nd-1.0Gd-0.5Zr-xZn (x = 0, 0.5, 1.0, and 1.5; wt%) alloys were investigated in this study. The addition of Zn influenced the intermetallic phase components significantly. After solution and peak-aging, the alloy with 0.5 wt% Zn addition exhibited the highest strength and hardness due to precipitation strengthening and grain boundary strengthening.

RARE METALS (2021)

Review Metallurgy & Metallurgical Engineering

Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying

Jinshu Xie et al.

Summary: Magnesium alloys have great application potential, but improvements in both strength and corrosion resistance are still needed. The addition of rare earth elements can enhance the performance of magnesium alloys, but further research is necessary to improve both strength and anti-corrosion properties.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Article Materials Science, Multidisciplinary

Enhanced electrocaloric effect in compositional driven potassium sodium niobate-based relaxor ferroelectrics

Nan Zhang et al.

Summary: This study presents diffused ferroelectric-paraelectric phase transition in (K, Na)NbO3 (KNN) through appropriate composition engineering, resulting in relaxor ferroelectrics with large temperature change and high electrocaloric effect. These materials exhibit a wide temperature span exceeding 55 degrees Celsius at the high electrocaloric effect criterion, providing high-performance lead-free ferroelectric ceramics for refrigeration devices.

JOURNAL OF MATERIALS RESEARCH (2021)

Article Materials Science, Multidisciplinary

The Role of Nd in Corrosion Properties of Mg-12Gd-2Zn-0.4Zr Alloys

Lixin Hong et al.

Summary: The addition of Nd refines and homogenizes the microstructure of the alloys, improving their corrosion resistance initially, but leading to accelerated corrosion with prolonged immersion time. Alloys without Nd exhibit the best corrosion resistance, while alloys with 0.5wt.% Nd show the highest corrosion rate.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Article Metallurgy & Metallurgical Engineering

Comparison of castability, mechanical, and corrosion properties of Mg-Zn-Y-Zr alloys containing LPSO and W phases

V. E. Bazhenov et al.

Summary: The Mg-Zn-Y-Zr alloys with LPSO phase showed lower hot tearing susceptibility and higher corrosion resistance compared to alloys with W phase, while their fluidity remained similar. Increasing the Y content in the alloys resulted in increased yield strength, while other tensile properties were similar for all alloys.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)

Article Metallurgy & Metallurgical Engineering

Aging kinetics of 14H-LPSO precipitates in Mg-Zn-Y alloy

Di-qing Wan et al.

CHINA FOUNDRY (2020)

Article Nanoscience & Nanotechnology

Formation of long-period stacking-ordered (LPSO) structures and microhardness of as-cast Mg-4.5Zn-6Y alloy

Pingli Mao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Review Materials Science, Multidisciplinary

Thermodynamics and kinetics of phase transformation in rare earth-magnesium alloys: A critical review

Qun Luo et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Metallurgy & Metallurgical Engineering

Effect of Zn Addition on the Microstructure and Mechanical Properties of Cast Mg-10Gd-3.5Er-xZn-0.5Zr Alloys

Qiu Zhang et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

Review Materials Science, Multidisciplinary

A Review on Developments in Magnesium Alloys

A. Arslan Kaya

FRONTIERS IN MATERIALS (2020)

Article Metallurgy & Metallurgical Engineering

Effect of heat treatment on LPSO morphology and mechanical properties of Mg-Zn-Y-Gd alloys

Hongxin Liao et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

Article Materials Science, Multidisciplinary

Atomic-scale observation of β′ and LPSO phase in Mg-Y-Ni alloy by HAADF-STEM

Liping Yu et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Article Materials Science, Multidisciplinary

Effect of Ca addition on microstructures of aged Mg-15Gd-0.5Zr alloy

H. W. Chen et al.

MATERIALS CHARACTERIZATION (2019)

Article Metallurgy & Metallurgical Engineering

Stable and metastable phase equilibria in binary Mg-Gd system: A comprehensive understanding aided by CALPHAD modeling

Huaijia Si et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Article Metallurgy & Metallurgical Engineering

Precipitate evolution in Mg-7Gd-3Y-1Nd-1Zn-0.5Zr alloy during isothermal ageing at 240°C

Wei Liu et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Article Materials Science, Multidisciplinary

Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg-Gd-Ca alloy

Ning Mo et al.

ACTA MATERIALIA (2019)

Article Metallurgy & Metallurgical Engineering

Solute Clusters/Enrichment at the Early Stage of Ageing in Mg-Zn-Gd Alloys Studied by Atom Probe Tomography

Xin-Fu Gu et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)

Review Metallurgy & Metallurgical Engineering

Microstructure and Mechanical Properties of Mg-RE-TM Cast Alloys Containing Long Period Stacking Ordered Phases

Huan Liu et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2019)

Article Metallurgy & Metallurgical Engineering

Precipitation modification in cast Mg-1Nd-1Ce-Zr alloy by Zn addition

Yiyuan Zhou et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2019)

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical properties of Mg-10Gd-3Y-xZn-0.6Zr alloys

Zhibing Ding et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Article Nanoscience & Nanotechnology

Microstructure evolution and mechanical properties of as-extruded Mg-Gd-Y-Zr alloy with Zn and Nd additions

Zijian Yu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Nanoscience & Nanotechnology

Enhanced mechanical properties of Mg-Gd-Y-Zn-Mn alloy by tailoring the morphology of long period stacking ordered phase

Kui Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Chemistry, Physical

Phase Formation of Mg-Zn-Gd Alloys on the Mg-rich Corner

Lan Luo et al.

MATERIALS (2018)

Review Metallurgy & Metallurgical Engineering

Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg-Gd and Mg-Y systems

Jinghuai Zhang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2018)

Article Chemistry, Physical

Effects of Mn addition on the microstructures and mechanical properties of the Mg-15Gd-1Zn alloy

Y. Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Materials Science, Multidisciplinary

Characterization and strengthening effects of γ′ precipitates in a high-strength casting Mg-15Gd-1Zn-0.4Zr (wt.%) alloy

Wei Rong et al.

MATERIALS CHARACTERIZATION (2017)

Article Nanoscience & Nanotechnology

Equilibrium and metastable phases in a designed precipitation hardenable Mg-3Gd-3Nd-0.6Zr alloy

Qiaowang Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Review Materials Science, Multidisciplinary

Fundamentals and advances in magnesium alloy corrosion

M. Esmaily et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Article Metallurgy & Metallurgical Engineering

Effects of solid solution treatment and cooling on morphology of LPSO phase and precipitation hardening behavior of Mg-Dy-Ni alloy

Li-tao Yuan et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

Article Multidisciplinary Sciences

Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness

Michiru Nishita et al.

SCIENTIFIC REPORTS (2017)

Article Materials Science, Multidisciplinary

On the structure and role of β′F in β1 precipitation in Mg-Nd alloys

H. Liu et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Solute clusters and GP zones in binary Mg-RE alloys

J. F. Nie et al.

ACTA MATERIALIA (2016)

Article Materials Science, Multidisciplinary

On the early stages of precipitation in dilute Mg-Nd alloys

Anirudh Raju Natarajan et al.

ACTA MATERIALIA (2016)

Article Chemistry, Physical

Metastable phase formation in ternary Mg-Gd-Zn alloys

Joachim Groebner et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Review Materials Science, Multidisciplinary

A Review on Casting Magnesium Alloys: Modification of Commercial Alloys and Development of New Alloys

Fusheng Pan et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)

Article Nanoscience & Nanotechnology

Heat treatment and mechanical properties of a high-strength cast Mg-Gd-Zn alloy

Juncai Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Nanoscience & Nanotechnology

Effect of heat treatment on microstructure, mechanical properties and fracture behaviors of sand-cast Mg-4Y-3Nd-1Gd-0.2Zn-0.5Zr alloy

Haohao Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Review Materials Science, Multidisciplinary

Effect of long-period stacking ordered phase on microstructure, mechanical property and corrosion resistance of Mg alloys: A review

Daokui Xu et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)

Article Materials Science, Multidisciplinary

Microstructures and mechanical properties of homogenization and isothermal aging Mg-Gd-Er-Zn-Zr alloy

Kai Wen et al.

RARE METALS (2016)

Review Materials Science, Multidisciplinary

Effect of long-period stacking ordered phase on microstructure, mechanical property and corrosion resistance of Mg alloys: A review

Daokui Xu et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)

Article Materials Science, Multidisciplinary

Ultrahigh strength as-extruded Mg-10.3Zn-6.4Y-0.4Zr-0.5Ca alloy containing W phase

H. S. Jiang et al.

MATERIALS & DESIGN (2016)

Article Metallurgy & Metallurgical Engineering

The effect of LPSO on the deformation mechanism of Mg-Gd-Y-Zn-Zr magnesium alloy

Jianbo Shao et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2016)

Article Metallurgy & Metallurgical Engineering

Effect of Gd addition on microstructure and corrosion behaviors of Mg-Zn-Y alloy

Jinyang Zhang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2016)

Article Materials Science, Multidisciplinary

Phase equilibria and transformations in ternary Mg-Gd-Zn alloys

Joachim Groebner et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

On the room temperature deformation mechanisms of a Mg-Y-Zn alloy with long-period-stacking-ordered structures

Jin-Kyung Kim et al.

ACTA MATERIALIA (2015)

Article Engineering, Biomedical

Mechanical properties and corrosion behavior of Mg-Gd-Ca-Zr alloys for medical applications

Ling-ling Shi et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)

Article Chemistry, Physical

Phase Diagrams: The Beginning of Wisdom

Rainer Schmid-Fetzer

JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2014)

Article Materials Science, Multidisciplinary

Interplay between deformation twins and basal stacking faults enriched with Zn/Y in Mg97Zn1Y2 alloy

X. H. Shao et al.

PHILOSOPHICAL MAGAZINE LETTERS (2014)

Article Nanoscience & Nanotechnology

Effect of Nd on the microstructure and mechanical properties of Mg-8Gd-5Y-2Zn-0.5Zr alloy

Xingguo Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Materials Science, Multidisciplinary

Phase equilibria and transformations in ternary Mg-rich Mg-Y-Zn alloys

J. Groebner et al.

ACTA MATERIALIA (2012)

Article Materials Science, Multidisciplinary

Precipitation and Hardening in Magnesium Alloys

Jian-Feng Nie

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

Article Materials Science, Multidisciplinary

Review on long-period stacking-ordered structures in Mg-Zn-RE alloys

Lu Fumin et al.

RARE METALS (2012)

Article Metallurgy & Metallurgical Engineering

LPSO STRUCTURE AND AGING PHASES IN Mg-Gd-Zn-Zr ALLOY

Zeng Xiaoqin et al.

ACTA METALLURGICA SINICA (2010)

Editorial Material Multidisciplinary Sciences

Weight Loss with Magnesium Alloys

Tresa M. Pollock

SCIENCE (2010)

Article Nanoscience & Nanotechnology

Enhanced age-hardening and formation of plate precipitates in Mg-Gd-Ag alloys

K. Yamada et al.

SCRIPTA MATERIALIA (2009)

Article Chemistry, Physical

Effect of W-phase on the mechanical properties of as-cast Mg-Zn-Y-Zr alloys

D. K. Xu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Article Materials Science, Multidisciplinary

Effects of Zn/Gd ratio and content of Zn, Gd on phase constitutions of Mg alloys

Yong Liu et al.

MATERIALS TRANSACTIONS (2008)

Article Nanoscience & Nanotechnology

Enhanced precipitation-hardening in Mg-Gd alloys containing Ag and Zn

X. Gao et al.

SCRIPTA MATERIALIA (2008)

Article Metallurgy & Metallurgical Engineering

Review on Research and Development of Magnesium Alloys

Z YANG et al.

Acta Metallurgica Sinica-English Letters (2008)

Article Materials Science, Multidisciplinary

Formation and mechanical properties of Mg97Zn1RE2 alloys with long-period stacking ordered structure

Yoshihito Kawamura et al.

MATERIALS TRANSACTIONS (2007)

Article Nanoscience & Nanotechnology

Twinning and the ductility of magnesium alloys Part I: Tension twins

M. R. Barnett

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Article Materials Science, Multidisciplinary

Effect of Zn additions on the age-hardening of Mg-2.0Gd-1.2Y-0.2Zr alloys

T. Honma et al.

ACTA MATERIALIA (2007)

Article Materials Science, Multidisciplinary

Alloy development of high toughness Mg-Gd-Y-Zn-Zr alloys

Kentaro Yamada et al.

MATERIALS TRANSACTIONS (2006)

Article Nanoscience & Nanotechnology

Grain refinement of magnesium alloys by zirconium: Formation of equiaxed grains

M Qian et al.

SCRIPTA MATERIALIA (2006)

Article Nanoscience & Nanotechnology

Enhanced age hardening response and creep resistance of Mg-Gd alloys containing Zn

JF Nie et al.

SCRIPTA MATERIALIA (2005)

Article Nanoscience & Nanotechnology

Heterogeneous nuclei size in magnesium-zirconium alloys

M Qian et al.

SCRIPTA MATERIALIA (2004)

Review Materials Science, Multidisciplinary

Recent magnesium alloy development for elevated temperature applications

AA Luo

INTERNATIONAL MATERIALS REVIEWS (2004)

Review Materials Science, Multidisciplinary

Phase diagram calculation: past, present and future

YA Chang et al.

PROGRESS IN MATERIALS SCIENCE (2004)

Article Chemistry, Physical

Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1GPa

MW Barsoum et al.

NATURE MATERIALS (2003)

Article Materials Science, Multidisciplinary

Rapidly solidified powder metallurgy Mg97Zn1Y2Alloys with excellent tensile yield strength above 600 MPa

Y Kawamura et al.

MATERIALS TRANSACTIONS (2001)

Article Materials Science, Multidisciplinary

High-resolution electron microscopy on the X-Mg12ZnY phase in a high strength Mg-Zn-Zr-Y magnesium alloy

ZP Luo et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2000)