Related references
Note: Only part of the references are listed.A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation
Qian Cheng et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2021)
Hot deformation behavior and processing map of a Sn0.5CoCrFeMnNi high entropy alloy with dual phases
H. T. Jeong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
A high-performance Mg-4.9Gd-3.2Y-1.1Zn-0.5Zr alloy via multidirectional forging after analyzing its compression behavior
Xiaojie Zhou et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Effect of forced-air cooling on the microstructure and age-hardening response of extruded Mg-Gd-Y-Zn-Zr alloy full with LPSO lamella
S. Z. Wu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Effect of subgrain and the associated DRX behaviour on the texture modification of Mg-6.63Zn-0.56Zr alloy during hot tensile deformation
Jingyuan Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
A Comparative Study on the Hot Deformation Behavior of As-Cast and Twin-Roll Cast Mg-6.8Y-2.5Zn-0.4Zr Alloy
Kristina Kittner et al.
MATERIALS (2021)
Deformation-induced dissolution of long-period stacking ordered structures and its re-precipitation in a Mg-Gd-Zn-Mn alloy
Ning Su et al.
MATERIALS CHARACTERIZATION (2021)
The role of long period stacking ordered phase in dynamic recrystallization of a Mg-Zn-Y alloy during hot compression
Tao Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Easy construction of processing maps for metallic alloys using a flow instability criterion based on power-law breakdown
W. J. Kim et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Modeling of flow behavior and microstructure evolution for Mg-6Gd-5Y-0.3Zr alloy during hot deformation using a unified internal state variable method
Wenchen Xu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
High-strain-rate solute drag creep in a Cu-22%Sn alloy (Cu17Sn3) with near peritectic composition
J. Y. Yang et al.
MATERIALS CHARACTERIZATION (2020)
Fragmentation of long period stacking ordered (LPSO) phase and its impact on microstructure evolution of a Mg-Y-Zn alloy during multi-directional forging
Tao Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Constitutive Equation and Hot Processing Map of Mg-16Al Magnesium Alloy Bars
Zongwen Ma et al.
MATERIALS (2020)
Improved workability for Mg-Y-Zn alloys via increased volume fraction of block LPSO phases
Xiaojie Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Construction of processing maps combined with deformation mechanism maps using creep deformation equations
W. J. Kim et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effect of I(Mg3YZn6)-, W(Mg3Y2Zn3)- and LPSO(Mg12ZnY)-phases on tensile work-hardening and fracture behaviors of rolled Mg-Y-Zn alloys
Jun Yeong Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Recent Advances in LPSO-Containing Wrought Magnesium Alloys: Relationships Between Processing, Microstructure, and Mechanical Properties
Huan Liu et al.
JOM (2019)
Hot Deformation Characterization of Homogenized Mg-Gd-Y-Zn-Zr Alloy During Isothermal Compression
Bing Li et al.
JOM (2019)
Hot deformation and dynamic recrystallization behaviors of Mg-Gd-Zn alloy with LPSO phases
Kai Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of Repetitive Upsetting Extrusion on the Microstructure and Texture of GWZK124 Alloy under Different Starting Temperatures
Guanshi Zhang et al.
MATERIALS (2019)
Strengthening of Mg-based long-period stacking ordered (LPSO) phase with deformation kink bands
Koji Hagihara et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Deformation mechanisms and mechanical properties of (0001) Mg-Zn-Y 18R-LPSO single crystals
W. S. Chuang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of alloying composition on the microstructures and mechanical properties of Mg-Al-Zn-Ca-RE magnesium alloy
Fang Wang et al.
VACUUM (2019)
Measurements of diffusion coefficients of Ce, Gd and Mn in Mg
Wei Zhong et al.
MATERIALIA (2019)
Optimum parameters and kinetic analysis for hot working of a solution-treated Mg-Zn-Y-Mn magnesium alloy
Jianqiang Hao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Improved workability and ductility of the Mg-Gd-Y-Zn-Zr alloy via enhanced kinking and dynamic recrystallization
Xiaojie Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
What is going on in magnesium alloys?
X. J. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
The effect of nano β-TCP on hot compression deformation behavior and microstructure evolution of the biomedical Mg-Zn-Zr alloy
Haoran Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dynamic recrystallization behaviors of Mg-Gd-Y-Zn-Zr alloy with different morphologies and distributions of LPSO phases
Duxiu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Modeling dynamic recrystallization during hot deformation of a cast-homogenized Mg-Zn-Zr alloy
A. Hadadzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure
C. Xu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Hot Deformation Behavior of Homogenized Mg-13.5Gd-3.2Y-2.3Zn-0.5Zr Alloy via Hot Compression Tests
Zhimin Zhang et al.
MATERIALS (2018)
Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
Vyasaraj Manakari et al.
METALS (2017)
Study on the effect of solution treatment on hot deformation behavior and workability of Mg-7Gd-5Y-0.6Zn-0.8Zr magnesium alloy
Wenchen Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of the volume fraction of the icosahedral phase on the microstructures, hot compressive behaviors and processing maps of Mg-Zn-Y alloys
T. Y. Kwak et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Hot compression behavior of the Mg-Gd-Y-Zn-Zr alloy filled with intragranular long-period stacking ordered phases
Xiaojie Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The effect of volume fraction and dispersion of icosahedral phase particles on the strength and work hardening of Mg-Zn-Y alloys
T. Y. Kwak et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
First Reliable Diffusion Coefficients for Mg-Y and Additional Reliable Diffusion Coefficients for Mg-Sn and Mg-Zn
Wei Zhong et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Evolution of LPSO Phases and Their Effect on Dynamic Recrystallization in a Mg-Gd-Y-Zn-Zr Alloy
Xiao-jie Zhou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Deformation behavior, microstructure evolution and hot workability of Mg-3.7Gd-2.9Y-0.7Zn-0.7Zr alloy
Xueze Jin et al.
METALS AND MATERIALS INTERNATIONAL (2017)
Effect of LPSO and SFs on microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy
Chao Xu et al.
Scientific Reports (2017)
Plastic deformation behavior of 10H-type synchronized LPSO phase in a Mg-Zn-Y system
Koji Hagihara et al.
ACTA MATERIALIA (2016)
Thermodynamic stability of Mg-Y-Zn ternary alloys through first principles
Ryohei Tanaka et al.
INTERMETALLICS (2016)
Dynamic recrystallization behavior and hot workability of AZ41M magnesium alloy during hot deformation
Zhiwei Cai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Hot compressive deformation behaviors of Mg-10Gd-3Y-0.5Zr alloy
Tingting Zheng et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Hot compressive deformation behaviors of Mg-10Gd-3Y-0.5Zr alloy
Tingting Zheng et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
A review of dynamic recrystallization phenomena in metallic materials
K. Huang et al.
MATERIALS & DESIGN (2016)
Hot compression characteristics and processing maps of a cast Mg-9.5Zn-2.0Y alloy with icosahedral quasicrystalline phase
T. Y. Kwak et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
The Effect of Icosahedral Phase on Dynamic Recrystallization Evolution and Hot Workability of Mg-2.0Zn-0.3Zr-0.2Y Alloy
Bin-Jiang Lv et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Hot deformation and dynamic recrystallization behaviors of Mg-Gd-Y-Zr alloy
H. C. Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
In-Situ Observation on the Formation Behavior of the Deformation Kink Bands in Zn Single Crystal and LPSO Phase
Koji Hagihara et al.
MATERIALS TRANSACTIONS (2015)
Study on Flow Stress Model and Processing Map of Homogenized Mg-Gd-Y-Zn-Zr Alloy During Thermomechanical Processes
Yong Xue et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Dynamic recrystallization behavior and hot workability of Mg-2.0Zn-0.3Zr-0.9Y alloy by using hot compression test
Bin-Jiang Lv et al.
MATERIALS & DESIGN (2014)
The effect of 14H LPSO phase on dynamic recrystallization behavior and hot workability of Mg-2.0Zn-0.3Zr-5.8Y alloy
Bin-Jiang Lv et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Microstructure and creep behaviour of Mg-12Gd-3Y-1Zn-0.4Zr alloy
Zhu Xiurong et al.
JOURNAL OF RARE EARTHS (2013)
Hot deformation and processing map of as-homogenized Mg-9Gd-3Y-2Zn-0.5Zr alloy
Zhiwen Shao et al.
MATERIALS & DESIGN (2013)
Constitutive modeling of dynamic recrystallization kinetics and processing maps of Mg-2.0Zn-0.3Zr alloy based on true stress-strain curves
Bin-Jiang Lv et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The crystal structure of the LPSO phase of the 14H-type in the Mg-Al-Gd alloy system
K. Kishida et al.
INTERMETALLICS (2012)
Ultra high-strength Mg-Gd-Y-Zn-Zr alloy sheets processed by large-strain hot rolling and ageing
C. Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of multimodal microstructure evolution on mechanical properties of Mg-Zn-Y extruded alloy
Michiaki Yamasaki et al.
ACTA MATERIALIA (2011)
Hot compression deformation behavior and processing parameters of a cast Mg-Gd-Y-Zr alloy
Li Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Twinning-induced dynamic recrystallization in a magnesium alloy extruded at 450 °C
Q. Ma et al.
SCRIPTA MATERIALIA (2011)
Plastic deformation behavior of Mg12YZn with 18R long-period stacking ordered structure
K. Hagihara et al.
INTERMETALLICS (2010)
Flow behavior and processing map of as-cast Mg-10Gd-4.8Y-2Zn-0.6Zr alloy
H. Z. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
High-strength Mg-Zn-Y alloys produced by powder metallurgy
E. Mora et al.
SCRIPTA MATERIALIA (2009)
Effect of W-phase on the mechanical properties of as-cast Mg-Zn-Y-Zr alloys
D. K. Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Microstructure, mechanical properties and corrosion properties of Mg-Zn-Y alloys with low Zn content
Erlin Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Magnesium and its alloys applications in automotive industry
Mustafa Kemal Kulekci
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Microstructural development during hot working of Mg-3Al-1Zn
A. G. Beer et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
The role of annealing twins during recrystallization of Cu
D. P. Field et al.
ACTA MATERIALIA (2007)
Effect of Y for enhanced age hardening response and mechanical properties of Mg-Gd-Y-Zr alloys
Jun Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Effect of Y concentration on the microstructure and mechanical properties of as-cast Mg-Zn-Y-Zr alloys
D. K. Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
The influence of element Y on the mechanical properties of the as-extruded Mg-Zn-Y-Zr alloys
D. K. Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Alloy development of high toughness Mg-Gd-Y-Zn-Zr alloys
Kentaro Yamada et al.
MATERIALS TRANSACTIONS (2006)
Effects of Zn/Y ratio on microstructure and mechanical properties of Mg-Zn-Y alloys
JY Lee et al.
MATERIALS LETTERS (2005)
Variation of long-period stacking order structures in rapidly solidified Mg97Zn1Y2 alloy
M Matsuda et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Share Paper
