4.7 Article

Quartz tuning forks resonance frequency matching for laser spectroscopy sensing

Related references

Note: Only part of the references are listed.
Article Optics

Highly sensitive methane detection based on light-induced thermoelastic spectroscopy with a 2.33 μm diode laser and adaptive Savitzky-Golay filtering

Xiaonan Liu et al.

Summary: In this manuscript, a highly sensitive methane sensor based on light-induced thermoelastic spectroscopy (LITES) using a high-power 2.33 μm diode laser is demonstrated for the first time. The sensor shows long-term stability and sub ppm-level detection ability, making it valuable for applications such as environmental monitoring and industrial safety.

OPTICS EXPRESS (2022)

Article Optics

H-shaped acoustic micro-resonator-based quartz-enhanced photoacoustic spectroscopy

Yufei Ma et al.

Summary: An H-shaped acoustic micro-resonator (AmR)-based quartz-enhanced photoacoustic spectroscopy (QEPAS) sensor is demonstrated for the first time, which offers advantages of easy optical alignment, high utilization of laser energy, and improved detection sensitivity compared to a bare quartz tuning fork (QTF)-based sensor.

OPTICS LETTERS (2022)

Article Optics

Quartz-enhanced photoacoustic-photothermal spectroscopy for trace gas sensing

Yinqiu Hu et al.

Summary: The quartz-enhanced photoacoustic-photothermal spectroscopy (QEPA-PTS) technique combines photoacoustic and photothermal signals to enhance sensor performance, successfully detecting 1.01% water vapor. Proposed improvements for further enhancement of this technique.

OPTICS EXPRESS (2021)

Article Acoustics

Long-distance in-situ methane detection using near-infrared light-induced thermo-elastic spectroscopy

Lien Hu et al.

Summary: A novel wavelength-locked light-induced thermo-elastic spectroscopy (WL-LITES) gas sensor system was proposed for long-distance methane detection, achieving low detection limits and fast response times.

PHOTOACOUSTICS (2021)

Article Physics, Applied

High and flat spectral responsivity of quartz tuning fork used as infrared photodetector in tunable diode laser spectroscopy

Tingting Wei et al.

Summary: In this study, a custom quartz tuning fork was used as a sensitive and broadband infrared photodetector for absorption spectroscopy, with the photodetection process based on light impacting the tuning fork and generating a strain field. The study demonstrated a spectrally flat responsivity of approximately 2.2 kV/W and a noise-equivalent power of 1.5 nW/√Hz, without the need for any thermoelectrical cooling systems. Additionally, a heterodyne detection scheme was implemented to retrieve resonance properties and gas concentration in a single, fast measurement.

APPLIED PHYSICS REVIEWS (2021)

Article Optics

Trace gas sensing based on single-quartz-enhanced photoacoustic-photothermal dual spectroscopy

Shunda Qiao et al.

Summary: A novel single-quartz-enhanced dual spectroscopy trace gas sensor was developed, utilizing a quartz tuning fork to detect photoacoustic and photothermal signals simultaneously, improving detection performance and avoiding frequency mismatching issues in multi-sensor systems. The experimental results confirmed the successful addition of the signals in this sensor system.

OPTICS LETTERS (2021)

Article Optics

Graphene oxide and polydimethylsiloxane coated quartz tuning fork for improved sensitive near- and mid-infrared detection

Cunguang Lou et al.

Summary: A wideband optical-detection strategy based on a quartz tuning fork was proposed, with graphene oxide and polydimethylsiloxane coatings applied to enhance sensitivity and signal-to-noise ratio. The device demonstrated high responsivity, wide wavelength response, and low noise equivalent power, potentially paving the way for low-cost room temperature photodetection sensors.

OPTICS EXPRESS (2021)

Article Optics

Ppt level carbon monoxide detection based on light-induced thermoelastic spectroscopy exploring custom quartz tuning forks and a mid-infrared QCL

Shunda Qiao et al.

Summary: In this paper, an ultra-highly sensitive light-induced thermoelastic spectroscopy (LITES)-based carbon monoxide (CO) sensor utilizing custom quartz tuning forks (QTFs) as photodetector, a multi-pass cell, and a mid-infrared quantum cascade laser (QCL) was reported for the first time. The system achieved minimum detection limits (MDLs) of 750 ppt, 4.6 ppb, and 5.8 ppb with different QTFs when the integration time was set at 200 ms. The most sensitive QTF showed an excellent linear response to CO concentration, indicating a promising sensor calibration result.

OPTICS EXPRESS (2021)

Article Acoustics

Quartz tuning fork-based demodulation of an acoustic signal induced by photo-thermo-elastic energy conversion

Ziting Lang et al.

Summary: A gas sensing method based on QEPTS demodulated by QTF sensing acoustic wave is proposed in this study, which can avoid laser irradiation on QTF and achieve better detection sensitivity. The experimental results show that the method has an enhanced SNR compared to traditional QEPTS.

PHOTOACOUSTICS (2021)

Article Physics, Applied

In-plane quartz-enhanced photoacoustic spectroscopy

Yufei Ma et al.

APPLIED PHYSICS LETTERS (2020)

Article Materials Science, Multidisciplinary

Atomic Force Microscope-Based Meniscus-Confined Three-Dimensional Electrodeposition

David Eliyahu et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Review Physics, Multidisciplinary

Recent Advances in QEPAS and QEPTS Based Trace Gas Sensing: A Review

Yufei Ma

FRONTIERS IN PHYSICS (2020)

Article Chemistry, Analytical

Low-cost quartz tuning fork based methane sensor for coal mine safety applications

Xiaoyu Chen et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Optics

QEPAS sensor for breath analysis: a behavior of pressure

Tobias Milde et al.

APPLIED OPTICS (2018)

Article Chemistry, Analytical

Fiber-ring laser intracavity QEPAS gas sensor using a 7.2 kHz quartz tuning fork

Qiang Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Review Physics, Applied

Recent advances in quartz enhanced photoacoustic sensing

Pietro Patimisco et al.

APPLIED PHYSICS REVIEWS (2018)

Article Chemistry, Analytical

Analysis of the electro-elastic properties of custom quartz tuning forks for optoacoustic gas sensing

P. Patimisco et al.

SENSORS AND ACTUATORS B-CHEMICAL (2016)

Article Physics, Applied

Multi-quartz-enhanced photoacoustic spectroscopy

Yufei Ma et al.

APPLIED PHYSICS LETTERS (2015)

Article Chemistry, Multidisciplinary

Nanoscale Observation of Waveguide Modes Enhancing the Efficiency of Solar Cells

Ulrich W. Paetzold et al.

NANO LETTERS (2014)

Proceedings Paper Optics

Small, low-power consumption CO-sensor for post-fire cleanup aboard spacecraft

John L. Bradshaw et al.

NEXT-GENERATION SPECTROSCOPIC TECHNOLOGIES IV (2011)

Article Optics

Off-beam quartz-enhanced photoacoustic spectroscopy

Kun Liu et al.

OPTICS LETTERS (2009)

Article Engineering, Electrical & Electronic

Dissolved gas analysis of alternative fluids for power transformers

Imad-U Khan et al.

IEEE ELECTRICAL INSULATION MAGAZINE (2007)

Letter Engineering, Electrical & Electronic

Femto-Newton force sensitivity quartz tuning fork sensor

Mladen Barbic et al.

SENSORS AND ACTUATORS A-PHYSICAL (2007)

Article Optics

Quartz-enhanced photoacoustic spectroscopy

AA Kosterev et al.

OPTICS LETTERS (2002)

Article Instruments & Instrumentation

Fundamental limits to force detection using quartz tuning forks

RD Grober et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2000)