Related references
Note: Only part of the references are listed.High-strength light-weight aramid fibre/polyamide 12 composites printed by Multi Jet Fusion
Jiayao Chen et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2022)
Emerging Bioinspired Artificial Woods
Zhi-Long Yu et al.
ADVANCED MATERIALS (2021)
Experimental and computational analysis of structure-property relationship in carbon fiber reinforced polymer composites fabricated by selective laser sintering
Haibin Tang et al.
COMPOSITES PART B-ENGINEERING (2021)
Bioinspired Highly Anisotropic, Ultrastrong and Stiff, and Osteoconductive Mineralized Wood Hydrogel Composites for Bone Repair
Xiaofei Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion
Chao Cai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
High-strength scalable graphene sheets by freezing stretch-induced alignment
Sijie Wan et al.
NATURE MATERIALS (2021)
Capillary-Force-Driven Self-Assembly of 4D-Printed Microstructures
Xiaojiang Liu et al.
ADVANCED MATERIALS (2021)
Oriented structure of short fiber reinforced polymer composites processed by selective laser sintering: The role of powder-spreading process
Hui Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
Enhancing the mechanical strength of Multi Jet Fusion-printed polyamide 12 and its glass fiber-reinforced composite via high-temperature annealing
Xiaojiang Liu et al.
ADDITIVE MANUFACTURING (2021)
A numerical study on the packing quality of fibre/polymer composite powder for powder bed fusion additive manufacturing
Pengfei Tan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
Experimental and modeling investigation on the viscoelastic-viscoplastic deformation of polyamide 12 printed by Multi Jet Fusion
Kaijuan Chen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Effects of fiber geometry and orientation distribution on the anisotropy of mechanical properties, creep behavior, and thermal expansion of natural fiber/HDPE composites
Xiaolong Hao et al.
COMPOSITES PART B-ENGINEERING (2020)
Preferred orientation of chopped fibers in polymer-based composites processed by selective laser sintering and fused deposition modeling: Effects on mechanical properties
Claudio Badini et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting
Lydia Lanzl et al.
POLYMER TESTING (2020)
Comparison between the properties of polyamide 12 and glass bead filled polyamide 12 using the multi jet fusion printing process
Heather J. O'Connor et al.
ADDITIVE MANUFACTURING (2020)
Recent Advances on High-Entropy Alloys for 3D Printing
Changjun Han et al.
ADVANCED MATERIALS (2020)
An effective microscale approach for determining the anisotropy of polymer composites reinforced with randomly distributed short fibers
Heng Cai et al.
COMPOSITE STRUCTURES (2020)
Spontaneous Alignment of Graphene Oxide in Hydrogel during 3D Printing for Multistimuli-Responsive Actuation
Mingchao Zhang et al.
ADVANCED SCIENCE (2020)
Mechanical anisotropy in polymer composites produced by material extrusion additive manufacturing
Nadim S. Hmeidat et al.
ADDITIVE MANUFACTURING (2020)
Understanding pore formation and the effect on mechanical properties of High Speed Sintered polyamide-12 parts: A focus on energy input
Zicheng Zhu et al.
MATERIALS & DESIGN (2020)
In-depth comparison of polyamide 12 parts manufactured by Multi Jet Fusion and Selective Laser Sintering
Stefano Rosso et al.
ADDITIVE MANUFACTURING (2020)
Effect of anisotropy in the build direction and laser-scanning conditions on characterization of short-glass-fiber-reinforced PBT for laser sintering
S. Arai et al.
OPTICS AND LASER TECHNOLOGY (2019)
Super-tough and strong nanocomposite fibers by flow-induced alignment of carbon nanotubes on grooved hydrogel surfaces
Chuangqi Zhao et al.
SCIENCE CHINA-MATERIALS (2019)
Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs
Wei Huang et al.
ADVANCED MATERIALS (2019)
Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance
Francesco Sillani et al.
ADDITIVE MANUFACTURING (2019)
Exploring thermal annealing and graphene-carbon nanotube additives to enhance crystallinity, thermal, electrical and tensile properties of aged poly (lactic) acid-based filament for 3D printing
Rumiana Kotsilkova et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering
Zhiyao Xu et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Polymeric composites for powder-based additive manufacturing: Materials and applications
Shangqin Yuan et al.
PROGRESS IN POLYMER SCIENCE (2019)
Hydrophilic/Hydrophobic Composite Shape-Shifting Structures
Zeang Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
Martin Spoerk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering
Shangqin Yuan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling
Guangxin Liao et al.
MATERIALS & DESIGN (2018)
Anisotropic, lightweight, strong, and super thermally insulating nanowood with naturally aligned nanocellulose
Tian Li et al.
SCIENCE ADVANCES (2018)
Effect of temperature on the fracture behavior of polyamide 12 and glass-filled polyamide 12 processed by selective laser sintering
A. J. Cano et al.
ENGINEERING FRACTURE MECHANICS (2018)
Three-dimensional printing of hierarchical liquid-crystal-polymer structures
Silvan Gantenbein et al.
NATURE (2018)
Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography
Daehoon Han et al.
SCIENTIFIC REPORTS (2018)
Evaluation of the mechanical performance of polymer parts fabricated using a production scale multi jet fusion printing process
Heather J. O'Connor et al.
ADDITIVE MANUFACTURING (2018)
Interlayer bonding improvement of material extrusion parts with polyphenylene sulfide using the Taguchi method
Emily R. Fitzharris et al.
ADDITIVE MANUFACTURING (2018)
Effects of short-glass-fiber content on material and part properties of poly (butylene terephthalate) processed by selective laser sintering
S. Arai et al.
ADDITIVE MANUFACTURING (2018)
Impact of extended sintering times on mechanical properties in PA-12 parts produced by powderbed fusion processes
Garrett Craft et al.
ADDITIVE MANUFACTURING (2018)
Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
Chuncheng Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Bonding quality and fracture analysis of polyamide 12 parts fabricated by fused deposition modeling
Hao Li et al.
RAPID PROTOTYPING JOURNAL (2017)
Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder
Wu Jing et al.
MATERIALS & DESIGN (2017)
A review on additive manufacturing of polymer-fiber composites
Pedram Parandoush et al.
COMPOSITE STRUCTURES (2017)
Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication
Delin Jiang et al.
ADDITIVE MANUFACTURING (2017)
Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing
Andrew N. Dickson et al.
ADDITIVE MANUFACTURING (2017)
Biomimetic Anisotropic Reinforcement Architectures by Electrically Assisted Nanocomposite 3D Printing
Yang Yang et al.
ADVANCED MATERIALS (2017)
Isotropic and anisotropic elasticity and yielding of 3D printed material
Rui Zou et al.
COMPOSITES PART B-ENGINEERING (2016)
Characterisation of carbon fibre-reinforced polyamide manufactured by selective laser sintering
Anton Jansson et al.
ADDITIVE MANUFACTURING (2016)
Effects of extrudate swell and nozzle geometry on fiber orientation in Fused Filament Fabrication nozzle flow
Blake P. Heller et al.
ADDITIVE MANUFACTURING (2016)
Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites
Seyyedvahid Mortazavian et al.
COMPOSITES PART B-ENGINEERING (2015)
Fatigue behavior and modeling of short fiber reinforced polymer composites including anisotropy and temperature effects
Seyyedvahid Mortazavian et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Bioinspired structural materials
Ulrike G. K. Wegst et al.
NATURE MATERIALS (2015)
Extrusion-based additive manufacturing of PEEK for biomedical applications
Mohammad Vaezi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature
A. Salazar et al.
COMPOSITES PART B-ENGINEERING (2014)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering
Chunze Yan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
R. D. Goodridge et al.
POLYMER TESTING (2011)
Local anisotropy analysis of injection moulded fibre reinforced polymer composites
A. Bernasconi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Tensile, impact and fiber length properties of injection-molded short and long glass fiber-reinforced polyamide 6,6 composites
A Hassan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2004)