☆ 4.8 Article

Multi-scale characterization of supersolidus liquid phase sintered H13 tool steel manufactured via binder jet additive manufacturing

ADDITIVE MANUFACTURING (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Characteristics of a modified H13 hot-work tool steel fabricated by means of laser beam powder bed fusion

Miwen Yuan et al.

Summary: In this study, a modified H13 hot-work tool steel was fabricated using laser beam powder bed fusion technology, and the effects of two post processing methods on the material properties were evaluated. The results showed that the impact toughness of the direct tempering samples was significantly lower than the conventional quenching followed by tempering samples, mainly due to the differences in work hardening ability and strain rate sensitivity caused by different microstructures.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Binder jet 3D printing?Process parameters, materials, properties, modeling, and challenges*

Amir Mostafaei et al.

Summary: Binder jet 3D printing, as a non-beam-based additive manufacturing method, shows great promise in rapid production of complex structures, but faces challenges in optimizing printing and post-processing methods. Understanding the physical processes during 3D printing and the science of densification post-sintering is crucial for enhancing part performance.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Laser Speed on Microstructure and Mechanical Properties of AISI H13 Tool Steel Prepared by Laser Powder Bed Fusion Process

Mohamed Abdel-latif et al.

Summary: Additive manufacturing technology is widely used for directly fabricating complex 3D products from CAD files, with Laser-based Powder Bed Fusion process considered as one of the most important AM techniques for producing high-quality Tool Steel products. The quality of the products can be affected by process parameters such as Laser scanning speed in the L-PBF process, as demonstrated in this study.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Predicting sintering window during supersolidus liquid phase sintering of steels using feedstock analysis and CALPHAD

Rangasayee Kannan et al.

Summary: This study demonstrates the prediction of excess carbon and sintering window for an alloy using CALPHAD simulation based on inputs from feedstock and binder analysis. The proposed approach has been successfully applied to pressureless sintering of H13 steel, indicating its potential application in Binder Jet Additive Manufacturing.

MATERIALS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hot Work Tool Steel Processed by Laser Powder Bed Fusion: A Review on Most Relevant Influencing Factors

Liang Wu et al.

Summary: The focus of the study is on the laser powder bed fusion processing of AISI H13 hot work tool steel. The optimization of process parameters and material evaluation stages has led to an improved understanding of processability and the formation of microstructures and defects during processing. Understanding solidification cracking and residual stress cracking is crucial for robust process and material development.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Microstructure and Defects on Mechanical Properties of AISI H13 Manufactured by Electron Beam Powder Bed Fusion

Moritz Kahlert et al.

Summary: The study investigates the relationships between processing parameters, microstructure evolution, chemical composition, and mechanical properties of a high alloyed tool steel AISI H13 processed by E-PBF. Specimens without fusion defects but free of cracks show improved ultimate strength and failure strain when optimized processing parameters are used. The fine grained bainitic/martensitic microstructure obtained from suitable processing parameters leads to enhanced mechanical properties compared to conventionally processed AISI H13.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel

M. Asberg et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Improving Compositional Accuracy in APT Analysis of Carbides Using a Decreased Detection Efficiency

Mattias Thuvander et al.

MICROSCOPY AND MICROANALYSIS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting

Mei Wang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Three-dimensional nanoscale characterisation of materials by atom probe tomography

Arun Devaraj et al.

INTERNATIONAL MATERIALS REVIEWS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Carbide precipitation characteristics in additive manufacturing of Co-Cr-Mo alloy via selective electron beam melting

X. P. Tan et al.

SCRIPTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Selective laser melting of H13: microstructure and residual stress

J. J. Yan et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Add to Collection

Article Engineering, Mechanical

SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices

Maciej Mazur et al.

RAPID PROTOTYPING JOURNAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting

Martin Joachim Holzweissig et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)

Add to Collection

Article Engineering, Chemical

Potential of Conformal Cooling Channels in Rapid Heat Cycle Molding: A Review

Z. Shayfull et al.

ADVANCES IN POLYMER TECHNOLOGY (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Direct evidence for the formation of ordered carbides in a ferrite-based low-density Fe-Mn-Al-C alloy studied by transmission electron microscopy and atom probe tomography

Jae-Bok Seol et al.

SCRIPTA MATERIALIA (2013)

Add to Collection

Review Materials Science, Multidisciplinary

Steels for bearings

H. K. D. H. Bhadeshia

PROGRESS IN MATERIALS SCIENCE (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of processing parameters and particle size on the properties of hot work and high speed tool steels by Spark Plasma Sintering

M. Pellizzari et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Comprehensive Investigations of the Supersolidus Liquid-Phase Sintering of Two Plastic Mold Steels

H. Hill et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)

Add to Collection

Article Engineering, Mechanical

Characterization of H13 steel produced via electron beam melting

D Cormier et al.

RAPID PROTOTYPING JOURNAL (2004)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Dislocation density within lath martensite in Fe-C and Fe-Ni alloys

S Morito et al.

ISIJ INTERNATIONAL (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Sintering densification and microstructural evolution of injection molding grade 17-4 PH stainless steel powder

YX Wu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Add to Collection

Review Materials Science, Multidisciplinary

Precipitation in creep resistant austenitic stainless steels

T Sourmail

MATERIALS SCIENCE AND TECHNOLOGY (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Sintering of injection molded M2 high-speed steel

ZY Liu et al.

MATERIALS LETTERS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.