☆ 4.5 Article

Propane dry reforming over highly active NiO-MgO solid solution catalyst for synthesis gas production

MOLECULAR CATALYSIS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Influence of Fe, La, Zr, Ce, and Ca on the catalytic performance and coke formation in dry reforming of methane over Ni/MgO.Al2O3 catalyst

Somaye Sadat Miri et al.

Summary: The catalytic and structural properties of mesoporous nanocrystalline 10 wt.% Ni-MeOx-MgAl2O4 catalysts were investigated in dry reforming of methane. The addition of Ce significantly improved the catalytic performance, suppressing carbon deposition and enhancing CH4 conversion. The 3 wt.% Ce-promoted catalyst exhibited the best performance in terms of high CH4 conversion and low carbon deposition.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Solid-state synthesis method for the preparation of cobalt doped Ni-Al2O3 mesoporous catalysts for CO2 methanation

Parisa Shafiee et al.

Summary: The study demonstrated that the addition of cobalt can enhance the activity of the catalyst in CO2 methanation reaction, with the 15 wt%Ni-12.5 wt%Co-Al2O3 catalyst showing the best performance and high stability. Additionally, complete CO conversion was achieved in CO methanation reaction at 300 degrees C.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Barium promoted manganese oxide catalysts in low-temperature methane catalytic combustion

Ehsan Akbari et al.

Summary: The 10 wt% BaO-MnOx catalyst synthesized in this study showed excellent catalytic performance in lean methane catalytic combustion at low temperatures and exhibited high catalytic stability under dry feed conditions. The presence of barium oxide played a crucial role in supplying oxygen during the MCC process, leading to higher catalytic activity.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Engineering, Chemical

Catalytic Methane Combustion on the Hydrothermally Synthesized MnO2 Nanowire Catalysts

Ehsan Akbari et al.

Summary: Different morphologies of MnOx nanocrystalline catalysts prepared using hydrothermal and solution methods showed varying performance in catalytic combustion of methane, with the wire-like MnO2 catalyst exhibiting excellent efficiency. Various synthesis factors significantly influenced the structure and activity of the catalysts, with a specific sample showing the highest efficiency under certain conditions. The stability of the optimal MnO2 sample decreased slightly in the presence of CO2 and water vapor, but displayed high stability under dry feed conditions at higher temperatures for an extended period.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Catalytic performance of copper oxide supported α-MnO2 nanowires for the CO preferential oxidation in H2-rich stream

Raziyeh Jokar et al.

Summary: The study found that the 10wt% CuO/MnO2 catalyst exhibited the best catalytic performance in CO preferential oxidation reaction, attributed to the synergistic interaction between copper and manganese. However, adding CO2 and/or H2O to the feedstock decreased the catalyst performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Energy & Fuels

Preparation of the Mn-Promoted NiO-Al2O3 nanocatalysts for low temperature CO2 methanation

Kianoush Tamimi et al.

Summary: In this study, NiO-Al2O3 catalysts promoted by various oxides were synthesized using a mechanochemical method, and their performance in CO2 methanation was investigated. The catalyst promoted by manganese oxide showed the best performance, with higher CO2 adsorption and reducibility. The synthesized catalyst showed high efficiency when calcined at 500 degrees C, and also exhibited good stability during the reaction process.

JOURNAL OF THE ENERGY INSTITUTE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Defect engineering of oxide perovskites for catalysis and energy storage: synthesis of chemistry and materials science

Hamidreza Arandiyan et al.

Summary: Oxide perovskites are important materials in various technological areas, but face challenges that can be addressed through defect engineering to improve design, fabrication, and application. A critical examination of the role of defect engineering in oxide perovskites has revealed key considerations for future development and application.

CHEMICAL SOCIETY REVIEWS (2021)

Add to Collection

Article Chemistry, Applied

Trifunctional strategy for the design and synthesis of a Ni-CeO2@SiO2 catalyst with remarkable low-temperature sintering and coking resistance for methane dry reforming

Sixue Lin et al.

Summary: The confined Ni-based catalyst Ni-CeO2@SiO2 prepared using a trifunctional strategy exhibited higher activity and stability in the dry reforming of methane (DRM) of CO2 and CH4. The catalyst also showed superior low-temperature stability and resistance to carbon deposition and sintering, making it a potential guideline for designing high-performance catalysts for CO2 and CH4 dry reforming.

CHINESE JOURNAL OF CATALYSIS (2021)

Add to Collection

Article Energy & Fuels

Influence of metal loading and reduction temperature on the performance of mesoporous NiO-MgO-SiO2 catalyst in propane steam reforming

F. Barzegari et al.

Summary: The NiO-MgO-SiO2 catalyst with 15% nickel loading exhibited the highest activity in propane steam reforming with excellent resistance against coke deposition, while further increase in nickel content reduced catalyst activity. The reduction temperature significantly influenced the dispersion and particle size of metallic Ni on the catalyst surface, affecting the catalytic performance.

JOURNAL OF THE ENERGY INSTITUTE (2021)

Add to Collection

Article Energy & Fuels

Preparation of highly active and stable nanostructured Ni-Cr2O3 catalysts for hydrogen purification via CO2 methanation reaction

Samane Gholami et al.

Summary: In this study, a series of Ni/Cr2O3 catalysts with various Ni percentages were prepared and it was found that increasing Ni content improved CO2 conversion and CH4 selectivity. The Ni-Cr2O3 mixed oxide catalyst showed higher activity compared to Ni/Cr2O3 catalyst. Additionally, the 20 wt%Ni-Cr2O3 composite catalyst exhibited high stability.

JOURNAL OF THE ENERGY INSTITUTE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Samarium-impregnated nickel catalysts over SBA-15 in steam reforming of CH4 process

Gharahshiran Vahid Shahed et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Grain growth in Nio-MgO and its dependence on faceting and the equilibrium crystal shape

Wolfgang Rheinheimer et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Chemistry, Physical

Effect of rare earth element (Ln = La, Pr, Sm, and Y) on physicochemical properties of the Ni/Ln2Ti2O7 catalysts for the steam reforming of methane

Xiuzhong Fang et al.

MOLECULAR CATALYSIS (2019)

Add to Collection

Article Chemistry, Physical

Catalysts in Coronas: A Surface Spatial Confinement Strategy for High-Performance Catalysts in Methane Dry Reforming

Honggen Peng et al.

ACS CATALYSIS (2019)

Add to Collection

Article Chemistry, Physical

Hydrogen production via propane dry reforming: Carbon deposition and reaction-deactivation study

Arman Siahvashi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Article Energy & Fuels

Synthesis gas production over highly active and stable nanostructured Ni-MgO-Al2O3 catalysts in dry reforming of methane: Effects of Ni contents

Ehsan Akbari et al.

FUEL (2017)

Add to Collection

Article Chemistry, Physical

Effect of substitution by Ni in MgAl2O4 spinel for biogas dry reforming

Narges Habibi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Engineering, Chemical

Preparation of mesoporous nanocrystalline Ni-MgAl2O4 catalysts by sol-gel combustion method and its applications in dry reforming reaction

Mahboobeh Zarei et al.

ADVANCED POWDER TECHNOLOGY (2016)

Add to Collection

Article Thermodynamics

Microwave plasma-based method of hydrogen production via combined steam reforming of methane

Dariusz Czylkowski et al.

ENERGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Mesoporous MgO center dot Al2O3 nanopowder-supported meso-macroporous nickel catalysts: a new path to high-performance biogas reforming for syngas

Narges Habibi et al.

RSC ADVANCES (2016)

Add to Collection

Article Chemistry, Physical

Plasma-catalytic removal of formaldehyde over Cu-Ce catalysts in a dielectric barrier discharge reactor

Xinbo Zhu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Add to Collection

Article Chemistry, Physical

Plasma-reduced Ni/γ-Al2O3 and CeO2-Ni/γ-Al2O3 catalysts for improving dry reforming of propane

J. Karuppiah et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Add to Collection

Article Chemistry, Physical

Plasma-catalytic dry reforming of methane in an atmospheric dielectric barrier discharge: Understanding the synergistic effect at low temperature

X. Tu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2012)

Add to Collection

Article Chemistry, Applied

Mechanochemical synthesis of double vanadate in Cu-Fe-V-O system and its physicochemical and catalytic properties

Krystyna Wieczorek-Ciurowa et al.

CATALYSIS TODAY (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation of nanocrystalline MgO by surfactant assisted precipitation method

Mehran Rezaei et al.

MATERIALS RESEARCH BULLETIN (2011)

Add to Collection

Article Engineering, Chemical

Bimetallic Co-Ni/Al2O3 catalyst for propane dry reforming: Estimation of reaction metrics from longevity runs

Faisal M. Althenayan et al.

CHEMICAL ENGINEERING SCIENCE (2010)

Add to Collection

Article Engineering, Environmental

Catalytic autothermal reforming of propane over the noble metal-doped hydrotalcite-type catalysts

Hong-Joo Lee et al.

CHEMICAL ENGINEERING JOURNAL (2009)

Add to Collection

Article Energy & Fuels

Effects of K2O promoter on the activity and stability of nickel catalysts supported on mesoporous nanocrystalline zirconia in CH4 reforming with CO2

Mehran Rezaei et al.

ENERGY & FUELS (2008)

Add to Collection

Article Chemistry, Physical

Propane dry reforming to synthesis gas over Ni-based catalysts:: Influence of support and operating parameters on catalyst activity and stability

L. B. Raberg et al.

JOURNAL OF CATALYSIS (2007)

Add to Collection

Article Energy & Fuels

Environmental impact evaluation of conventional fossil fuel production (oil and natural gas) and enhanced resource recovery with potential CO2 sequestration

Hsien H. Khoo et al.

ENERGY & FUELS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.