Related references
Note: Only part of the references are listed.Microstructure change and corrosion resistance of selective laser melted Ti-6Al-4V alloy subjected to pneumatic shot peening and ultrasonic shot peening
Qi Zhang et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2022)
MoO42--doped oxidative polymerized pyrrole-graphene oxide core-shell structure synthesis and application for dual-barrier & active functional epoxy-coating construction
Zahra Shahryari et al.
PROGRESS IN ORGANIC COATINGS (2022)
Electrochemical behavior of additively manufactured 316L stainless steel in H2SO4 solution containing methionine as an amino acid
Mahdi Yeganeh et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)
Corrosion mitigation ability of differently synthesized polypyrrole (PPy-FeCl3 & PPy-APS) conductive polymers modified with Na2MoO4 on mild steel in 3.5% NaCl solution: Comparative study and optimization
Zahra Shahryari et al.
CORROSION SCIENCE (2021)
Evaluation of the corrosion performance of selective laser melted 17-4 precipitation hardening stainless steel in Ringer's solution
Mahdi Yeganeh et al.
JOURNAL OF LASER APPLICATIONS (2021)
On the effect of build orientation and residual stress on the corrosion of 316L stainless steel prepared by selective laser melting
G. Sander et al.
CORROSION SCIENCE (2021)
Heat treatment effect on the microstructure, mechanical properties, and wear behaviors of stainless steel 316L prepared via selective laser melting
Won-Sang Shin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Enhanced corrosion resistance of the surface modified Ti-13Nb-13Zr alloy by ultrasonic shot peening
Pramod Kumar et al.
CORROSION SCIENCE (2021)
The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel
Qi Chao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Corrosion behavior of 316L stainless steel manufactured by laser powder bed fusion (L-PBF) in an alkaline solution
M. H. Shaeri Karimi et al.
OPTICS AND LASER TECHNOLOGY (2021)
Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
V. Cruz et al.
CORROSION SCIENCE (2020)
The passivity of selective laser melted 316L stainless steel
Decheng Kong et al.
APPLIED SURFACE SCIENCE (2020)
Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores
Zhiwei Duan et al.
CORROSION SCIENCE (2020)
The effects of hot isostatic pressing (HIP) and solubilization heat treatment on the density, mechanical properties, and microstructure of austenitic stainless steel parts produced by selective laser melting (SLM)
Erica Liverani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing
Emre Tascioglu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Microstructure and Mechanical Performance of Ti-6Al-4V Lattice Structures Manufactured via Electron Beam Melting (EBM): A Review
Giuseppe Del Guercio et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)
Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing
Majid Laleh et al.
CORROSION SCIENCE (2020)
Corrosion Inhibition ofl-Methionine Amino Acid as a Green Corrosion Inhibitor for Stainless Steel in the H(2)SO(4)Solution
M. Yeganeh et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
A comparative study of corrosion behavior of an additively manufactured Al-6061 RAM2 with extruded Al-6061 T6
Hamidreza Torbati-Sarraf et al.
CORROSION SCIENCE (2020)
An Investigation on the role of crystallographic texture on anisotropic electrochemical behavior of a commercially pure nickel manufactured by laser powder bed fusion (L-PBF) additive manufacturing
H. Torbati-Sarraf et al.
ELECTROCHIMICA ACTA (2020)
Insights into the Transformation-Induced Plasticity (TRIP) Effect in Ti-Free Grade 300 Maraging Steel Manufactured by Laser Powder Bed Fusion (LPBF)
Rangasayee Kannan et al.
JOM (2020)
Enhanced Corrosion Resistance of Additively Manufactured 316L Stainless Steel After Heat Treatment
Chengshuang Zhou et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel
Saad Waqar et al.
RAPID PROTOTYPING JOURNAL (2020)
Utilizing Lemon Balm extract as an effective green corrosion inhibitor for mild steel in 1M HCl solution: A detailed experimental, molecular dynamics, Monte Carlo and quantum mechanics study
Najmeh Asadi et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2019)
Anisotropy in mechanical properties and corrosion resistance of 316L stainless steel fabricated by selective laser melting
Xiao-qing Ni et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)
Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes
Decheng Kong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Intergranular corrosion behavior and mechanism of the stabilized ultra-pure 430LX ferritic stainless steel
Peize Cheng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
O. O. Salman et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effectiveness of using low-temperature coolants in machining to enhance durability of AISI 316L stainless steel for reusable biomedical devices
S. Bruschi et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Influences of tilt angles on microstructure and mechanical properties of 316L stainless steel parts fabricated by selective laser melting (SLM)
Cong Ni et al.
MATERIALS RESEARCH EXPRESS (2019)
Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting
Ruidi Li et al.
MATERIALS & DESIGN (2019)
Effect of stress-relief annealing on anodic dissolution behaviour of additive manufactured Ti-6Al-4V via laser solid forming
Jiaqiang Li et al.
CORROSION SCIENCE (2019)
Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting
Majid Laleh et al.
CORROSION SCIENCE (2019)
Selective laser melting processing of 316L stainless steel: effect of microstructural differences along building direction on corrosion behavior
Kaijie Lin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Microstructure and Corrosion Characteristics of Selective Laser-Melted 316L Stainless Steel: The Impact of Process-Induced Porosities
M. Kazemipour et al.
JOM (2019)
Corrosion behavior of polypyrrole (Ppy) coating modified by polyethylene glycol (PEG) doped ammonium bifluoride on AZ31 magnesium alloy
S. H. H. Mortazavi et al.
PROGRESS IN ORGANIC COATINGS (2019)
Selective Laser Melting of 316L Stainless Steel: Physics of Melting Mode Transition and Its Influence on Microstructural and Mechanical Behavior
Akash Aggarwal et al.
JOM (2019)
The design of additively manufactured lattices to increase the functionality of medical implants
Hanna E. Burton et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells
Decheng Kong et al.
ELECTROCHIMICA ACTA (2018)
Superhydrophobic Surface of AZ31 Alloy Fabricated by Chemical Treatment in the NiSO4 Solution
M. Yeganeh et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L
Rebecca F. Schaller et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing
Xiaohui Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
On the corrosion resistance of some selective laser melted alloys
Jyoti Suryawanshi et al.
MATERIALIA (2018)
Electrochemical behavior of polypyrrole-coated AZ31 alloy modified by fluoride anions
Maryam Hatami et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2017)
Electrodeposition of Zn-Co-Mo Alloy on the Steel Substrate from Citrate Bath and Its Corrosion Behavior in the Chloride Media
A. Keyvani et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
E. Liverani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Effect of laser peening on electrochemical properties of titanium stabilized 321 steel
D. Karthik et al.
MATERIALS CHEMISTRY AND PHYSICS (2017)
Application of mesoporous silica nanocontainers as an intelligent host of molybdate corrosion inhibitor embedded in the epoxy coated steel
A. Keyvani et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
Qi Chao et al.
SCRIPTA MATERIALIA (2017)
Application of mesoporous silica nanocontainers as an intelligent host of molybdate corrosion inhibitor embedded in the epoxy coated steel
A. Keyvani et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2017)
An assessment of ultra fine grained 316L stainless steel for implant applications
Sachin Vijay Muley et al.
ACTA BIOMATERIALIA (2016)
A probe into low-temperature stress corrosion cracking of 304L stainless steel by scanning vibrating electrode technique
Shirin Mehrazi et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2016)
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
Jason R. Trelewicz et al.
JOM (2016)
Corrosion inhibition of magnesium using biocompatible Alkyd coatings incorporated by mesoporous silica nanocontainers
M. Yeganeh et al.
PROGRESS IN ORGANIC COATINGS (2015)
Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review
Bo Song et al.
FRONTIERS OF MECHANICAL ENGINEERING (2015)
Application of mesoporous silica nanocontainers as smart host of corrosion inhibitor in polypyrrole Coatings
M. Saremi et al.
CORROSION SCIENCE (2014)
Mechanism of (Mg,Al,Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion
Shuqi Zheng et al.
CORROSION SCIENCE (2013)
Pit Initiation Mechanism at MnS Inclusions in Stainless Steel: Synergistic Effect of Elemental Sulfur and Chloride Ions
Aya Chiba et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Studies on pitting corrosion and sensitization in laser rapid manufactured specimens of type 316L stainless steel
P. Ganesh et al.
MATERIALS & DESIGN (2012)
Effects of copper addition on the formation of inclusions and the resistance to pitting corrosion of high performance duplex stainless steels
Soon-Hyeok Jeon et al.
CORROSION SCIENCE (2011)
Evaluation of titanium alloy fabricated using electron beam melting system for dental applications
Mari Koike et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Characterisation of copper thin film oxidation deposited by electron beam physical vapour deposition at low temperatures
M. Yeganeh et al.
MICRO & NANO LETTERS (2011)
Microstructure and mechanical properties of Nd:YAG laser welded Invar 36 alloy
Yue Zhao et al.
ADVANCED MATERIAL SCIENCE AND TECHNOLOGY, PTS 1 AND 2 (2011)
Determination of effective capacitance and film thickness from constant-phase-element parameters
Bryan Hirschorn et al.
ELECTROCHIMICA ACTA (2010)
Single track formation in selective laser melting of metal powders
I. Yadroitsev et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Evaluation by the Double Loop Electrochemical Potentiokinetic Reactivation Test of Aged Ferritic Stainless Steel Intergranular Corrosion Susceptibility
H. Sidhom et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Investigation of corrosion behaviour of nanostructured copper thin film produced by radio frequency sputtering
M. Saremi et al.
MICRO & NANO LETTERS (2010)
Share Paper
