Related references
Note: Only part of the references are listed.Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review
Md Al-Amin et al.
MATERIALS (2021)
Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel
Md Al-Amin et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Surface modification of titanium alloy using hBN powder mixed dielectric through micro-electric discharge machining
Deepak Sharma et al.
SURFACE & COATINGS TECHNOLOGY (2020)
On the Investigation of Surface Integrity of Ti6Al4V ELI Using Si-Mixed Electric Discharge Machining
Muhammad Umar Farooq et al.
MATERIALS (2020)
Development of a Highly Proliferated Bilayer Coating on 316L Stainless Steel Implants
Fatemeh Khosravi et al.
POLYMERS (2020)
Powder mixed-EDM for potential biomedical applications: A critical review
Md Al-Amin et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review
Md Al-Amin et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Surface Characterization and Tribological Performance Analysis of Electric Discharge Machined Duplex Stainless Steel
Timur Rizovich Ablyaz et al.
MICROMACHINES (2020)
Enhancing Corrosion and Wear Resistance of Ti6Al4V Alloy Using CNTs Mixed Electro-Discharge Process
Gurpreet Singh et al.
MICROMACHINES (2020)
Experimental studies on graphite powder-mixed electro-discharge machining of Inconel 718 super alloys: Comparison with conventional electro-discharge machining
Santosh Kumar Sahu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2019)
A novel fabrication method for a TiO2 layer over CoCr alloy
Dogukan Cetiner et al.
SURFACE ENGINEERING (2019)
In vitro corrosion and hemocompatibility evaluation of electrical discharge treated cobalt-chromium implant
Amit T. Mahajan et al.
JOURNAL OF MATERIALS RESEARCH (2019)
A review on electrically conducting polymer bionanocomposites for biomedical and other applications
Neelima Dubey et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2019)
Investigation of TiO2 anatase (101), (100) and (110) facets as immobilizer for a potential anticancer RNA aptamer: a classical molecular dynamics simulation
Mohaddeseh Habibzadeh Mashatooki et al.
MOLECULAR SIMULATION (2019)
Improving microhardness and wear resistance of 316L by TiO2 powder mixed electro-discharge treatment
Gurpreet Singh et al.
MATERIALS RESEARCH EXPRESS (2019)
Mechanobiological assessment of Ti-6Al-4V fabricated via selective laser melting technique: a review
Sahil Dhiman et al.
RAPID PROTOTYPING JOURNAL (2019)
Enhanced Tribocorrosion Resistance of Hard Ceramic Coated Ti-6Al-4V Alloy for Hip Implant Application: In-Vitro Simulation Study
Kai-yuan Cheng et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Potential of electrical discharge treatment to enhance the in vitro cytocompatibility and tribological performance of Co-Cr implant
Amit Mahajan et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Fabrication of superhydrophobic titanium dioxide coating on AISI 316L stainless steel by electrophoretic deposition and using trimethoxy(propyl)silane modification
Seyed Masoud Emarati et al.
SURFACE ENGINEERING (2019)
Surface modification of Ti-alloy by micro-electrical discharge process using tungsten disulphide powder suspension
Shalini Mohanty et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Corrosion and tribocorrosion study of 316L steel, Ti-6Al-4V and Ti-10Zr-10Nb-5Ta
S. Carquigny et al.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES (2019)
Laser surface modification of 316L stainless steel
Vamsi Krishna Balla et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Hydroxyapatite mixed-electro discharge formation of bioceramic Lakargiite (CaZrO3) on Zr-Cu-Ni-Ti-Be for orthopedic application
Abdul Azeez Abdu Aliyu et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Laser Surface Melting of AISI 316L Stainless Steel for Bio-implant Application
Jyotsna Dutta Majumdar et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES INDIA SECTION A-PHYSICAL SCIENCES (2018)
SURFACE-TREATED AND FIBRIN-COATED ELECTROSPUN POLYACRYLONITRILE FIBER FOR ENDOTHELIAL CELL GROWTH AND PROLIFERATION
Nur Syazana Rashidi et al.
FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING (2018)
Study of corrosion in biocompatible metals for implants: A review
N. S. Manam et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Nanoscale surface modification of AISI 316L stainless steel by severe shot peening
Sara Bagherifard et al.
MATERIALS & DESIGN (2016)
Surface modification of biomedical AISI 316L stainless steel with zirconium carbonitride coatings
L. Wang et al.
APPLIED SURFACE SCIENCE (2015)
Surface modification of stainless steel implants using nanostructured forsterite (Mg2SiO4) coating for biomaterial applications
Mitra Kheirkhah et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Corrosion and biological behavior of nanostructured 316L stainless steel processed by severe plastic deformation
K. Hajizadeh et al.
SURFACE AND INTERFACE ANALYSIS (2015)
Nanohardness, corrosion and protein adsorption properties of CuAlO2 films deposited on 316L stainless steel for biomedical applications
Shih-Hang Chang et al.
APPLIED SURFACE SCIENCE (2014)
Atomic layer deposition enhanced grafting of phosphorylcholine on stainless steel for intravascular stents
Qi Zhong et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2014)
Electrochemical polishing as a 316L stainless steel surface treatment method: Towards the improvement of biocompatibility
Sajjad Habibzadeh et al.
CORROSION SCIENCE (2014)
Biocompatibility of engineered nanoparticles for drug delivery
Sheva Naahidi et al.
JOURNAL OF CONTROLLED RELEASE (2013)
Laser surface modification of 316 L stainless steel with bioactive hydroxyapatite
Vamsi Krishna Balla et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Electrochemical and chemical methods for improving surface characteristics of 316L stainless steel for biomedical applications
Afrooz Latifi et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Study of the correlation between corrosion resistance and semi-conducting properties of the passive film of AISI 316L stainless steel in physiological solution
R. A. Antunes et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2012)
Nanosized Controlled Surface Pretreatment of Biometallic Alloy 316L Stainless Steel
Tarek M. Abdel-Fattah et al.
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2011)
Corrosion Resistance Of Laser Nitrided Commercially Pure Titanium And Ti-13Nb-13Zr Biomedical Alloys
S. Sathish et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2008)
The potential of biocompatible metallic stents and preventing restenosis
YP Kathuria
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Sol-gel hydroxyapatite coatings on stainless steel substrates
DM Liu et al.
BIOMATERIALS (2002)
Wear and corrosion of sliding counterparts of stainless-steel hip screw-plates
BF Shahgaldi et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2000)