Related references
Note: Only part of the references are listed.Characterizing devolatilized wood pellets for fluidized bed applications
Kolja Jarolin et al.
BIOMASS CONVERSION AND BIOREFINERY (2023)
Linearization-based methods for the calibration of bonded-particle models
Kolja Jarolin et al.
COMPUTATIONAL PARTICLE MECHANICS (2021)
Breakage behavior of biomass pellets: an experimental and numerical study
Hamid Gilvari et al.
COMPUTATIONAL PARTICLE MECHANICS (2021)
Simulations of biomass pyrolysis using glued-sphere CFD-DEM with 3-D intra-particle models
Liqiang Lu et al.
CHEMICAL ENGINEERING JOURNAL (2021)
Heat transfer modelling in Discrete Element Method (DEM)-based simulations of thermal processes: Theory and model development
Zhengbiao Peng et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2020)
Evaluation of heat transfer models at various fluidization velocities for biomass pyrolysis conducted in a bubbling fluidized bed
Lukas von Berg et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
MUSEN: An open-source framework for GPU-accelerated DEM simulations
Maksym Dosta et al.
SOFTWAREX (2020)
Modelling of Mechanical Behavior of Biopolymer Alginate Aerogels Using the Bonded-Particle Model
Maksym Dosta et al.
MOLECULES (2019)
Toward the modeling of combustion reactions through discrete element method (DEM) simulations
Martina Costa Reis et al.
COMPUTATIONAL PARTICLE MECHANICS (2018)
Modelling heat of reaction in biomass pyrolysis with detailed reaction schemes
Andres Anca-Couce et al.
FUEL (2017)
Coupled hydro-thermo-mechanical modeling of hydraulic fracturing in quasi-brittle rocks using BPM-DEM
Ingrid Tomac et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2017)
Bonded-particle extraction and stochastic modeling of internal agglomerate structures
Aaron Spettl et al.
ADVANCED POWDER TECHNOLOGY (2016)
Comparative Study of the Thermal Conductivity of Solid Biomass Fuels
P. E. Mason et al.
ENERGY & FUELS (2016)
Numerical and experimental analysis of influence of granule microstructure on its compression breakage
Maksym Dosta et al.
POWDER TECHNOLOGY (2016)
Gas-solid flow and heat transfer in fluidized beds with tubes: Effects of material properties and tube array settings
Q. F. Hou et al.
POWDER TECHNOLOGY (2016)
DEM simulations of amorphous irregular shaped micrometer-sized titania agglomerates at compression
S. Kozhar et al.
ADVANCED POWDER TECHNOLOGY (2015)
Simplification of devolatilization models for thermally-thick particles: Differences between wood logs and pellets
Amit Kumar Biswas et al.
CHEMICAL ENGINEERING JOURNAL (2015)
The bonded-particle model as a tool for rock mechanics research and application: current trends and future directions
David Oskar Potyondy
GEOSYSTEM ENGINEERING (2015)
Direct measurements of thermal properties of wood pellets: Elevated temperatures, fine fractions and moisture content
Johan Sjostrom et al.
FUEL (2014)
CFD simulations of biofuel bed conversion: A submodel for the drying and devolatilization of thermally thick wood particles
Henrik Strom et al.
COMBUSTION AND FLAME (2013)
Simulation of continuum heat conduction using DEM domains
I. Terreros et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Numerical analysis of a biomass pyrolysis particle model: Solution method optimized for the coupling to reactor models
Andres Anca-Couce et al.
FUEL (2012)
Modeling biomass particle pyrolysis with temperature-dependent heat of reactions
Y. Haseli et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2011)
Euler-Lagrange/DEM simulation of wood gasification in a bubbling fluidized bed reactor
Michael Oevermann et al.
PARTICUOLOGY (2009)
Combustion of a single particle of biomass
Yao B. Yang et al.
ENERGY & FUELS (2008)
Modeling chemical and physical processes of wood and biomass pyrolysis
Colomba Di Blasi
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)
Radiation heat transfer in circulating fluidized bed combustors
M Eriksson et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2005)
A bonded-particle model for rock
DO Potyondy et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)
Specific heat and thermal conductivity of softwood bark and softwood char particles
M Gupta et al.
FUEL (2003)
Modelling the fast pyrolysis of cellulosic particles in fluid-bed reactors
C Di Blasi
CHEMICAL ENGINEERING SCIENCE (2000)