☆ 4.6 Article

Evaluation and Improvement of the Performance of a Wellhead Multistage Bundle Gas-Liquid Separator

PROCESSES (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Modeling of viscosity of unstable crude oil-water mixture by characterization of energy consumption and crude oil physical properties

Haijun Luo et al.

Summary: When oilfield development enters the middle and late stages, the crude oil-water mixture often has a high water cut and cannot form a stable emulsion. Traditional emulsion viscosity models are not suitable for this unstable mixture. It is important to understand the viscosity characteristics of the unstable crude oil-water mixture with high water cut (UCMH) for pipeline transportation. The apparent viscosities of UCMH for 16 crude oils were determined and it was found that the apparent viscosity decreased with increasing shear rate, water cut of mixture, and temperature. The apparent viscosity of UCMH was not dependent on the content of single surfactants but was closely related to the content of combinatorial surfactants.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Modeling of microflow during viscoelastic polymer flooding in heterogenous reservoirs of Daqing Oilfield

Huiying Zhong et al.

Summary: Viscoelastic polymer flooding is widely used as an enhanced oil recovery method in oilfield development. This study focused on investigating the effects of polymer elasticity on displacement characteristics in Class II reservoirs, particularly in heterogeneous reservoirs. The research found that different oil layers have different displacement efficiencies, and increasing relaxation time can improve oil displacement efficiency.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Foaming Properties and Foam Structure of Produced Liquid in Alkali/Surfactant/Polymer Flooding Production

Zhihua Wang et al.

Summary: The study investigated the foaming properties of ASP flooding produced liquid through a series of experiments. The results showed that the concentration of chemical agents, temperature, and pressure are key factors affecting foaming capacity and foam stabilization. Different pH values, surfactant concentrations, and polymer concentrations also have an impact on foam stability.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Engineering, Chemical

Experimental and numerical performance study of a downward dual-inlet gas-liquid cylindrical cyclone (GLCC)

Yaan Wang et al.

Summary: The dual-inlet GLCC design improves liquid efficiency by directing most of the feed liquid to the lower cylinder, enhancing pre-separation and inhibiting short-circuit flow at the upper inlet. This configuration expands the operational envelope by reducing liquid entering the upper cylinder.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Numerical Analysis of Flow Behavior in Gas-Liquid Cylindrical Cyclone (GLCC(C)1) Separators With Inlet Design Modifications

Srinivas Swaroop Kolla et al.

Summary: The Gas-Liquid Cylindrical Cyclone (GLCC(C)) is a cost-effective separator with crucial performance depending on its inlet section design. This study presents a numerical analysis of the proposed modifications to the GLCC(C) inlet section design, aiming to assess their impact on performance.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

Add to Collection

Article Energy & Fuels

Optimization and intelligent control for operation parameters of multiphase mixture transportation pipeline in oilfield: A case study

Hankun Wang et al.

Summary: This study explores the development trend of building an intelligent oilfield transportation pipeline network with big data analysis and automatic control, using the SCADA system to collect data and establish universal relationships for pipeline operation parameters after correcting models based on data analysis. The results indicate the effectiveness of the corrected models in predicting pipeline operation parameters.

JOURNAL OF PIPELINE SCIENCE AND ENGINEERING (2021)

Add to Collection

Review Energy & Fuels

A review of multiproduct pipeline scheduling: from bibliometric analysis to research framework and future research directions

Zhengbing Li et al.

Summary: This paper conducts a bibliometric analysis on the multiproduct pipeline scheduling problem, constructs a research framework, and analyzes research defects and trends to provide comprehensive understanding and directions for future research.

JOURNAL OF PIPELINE SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Determination of boundary temperature and intelligent control scheme for heavy oil field gathering and transportation system

Chaoliang Zhu et al.

Summary: This study defines the safe inlet temperature and optimal oil transportation temperature for heavy oil gathering and transportation system, using real-time data collection and big data analysis. It proposes an intelligent control and management scheme for guiding heavy oil production and optimizing operational parameters to achieve energy savings, emission reduction, and efficient operation of the pipeline.

JOURNAL OF PIPELINE SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Experimental Study and Numerical Modeling of Boron Transport in Reservoir and Its Influence on Seawater-Breakthrough Calculation

Yanqing Wang et al.

Summary: Seawater injection is widely used in offshore oil reservoirs, but accurate calculation of seawater-breakthrough percentage is crucial to mitigate issues like souring and scaling. This study validated the use of natural-ion boron for this calculation, considering interactions with clays and the influence of pH on boron adsorption. The results highlighted the importance of understanding boron adsorption by different clays and the impact of solution pH on boron adsorption.

SPE RESERVOIR EVALUATION & ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Strength matching factor of pipeline girth weld designed by reliability method

Kai Wu et al.

Summary: This paper reviewed the current research status of codes and standards related to the strength requirement of weld metals in the pipeline industry, and investigated the evolution of girth weld strength matching factor and pipeline failure probability under different conditions. The results showed a significantly reduced probability of pipe failure as the weld metal strength matching factor increased.

JOURNAL OF PIPELINE SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Engineering, Petroleum

Dynamic Contact Angle Reformulates Pore-Scale Fluid-Fluid Displacement at Ultralow Interfacial Tension

Weipeng Yang et al.

Summary: Surfactant flooding is an effective method to reduce oil/water interfacial tension, however, the dynamics of displacement can be significantly different at ultralow IFT, where oil displacement by surfactant solutions appears as drainage. The study also reveals the formation of microemulsion during displacement.

SPE JOURNAL (2021)

Add to Collection

Article Energy & Fuels

Effects of load interactions on the onset of stage two of high pH stress corrosion cracking

Hamid Niazi et al.

Summary: This study investigated load interactions influencing crack geometry evolution during early stages of High pH Stress Corrosion Cracking (HpHSCC). Results showed that underload cycles and minor cycles play roles in intergranular crack growth acceleration, and avoiding large internal pressure fluctuation delays the onset of stage 2 of HpHSCC.

JOURNAL OF PIPELINE SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Analysis of Gas-Liquid Cylindrical Cyclone Separator With Inlet Modifications Using Fluid-Structure Interaction

Srinivas Swaroop Kolla et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Engineering, Chemical

Experimental and numerical study of separation characteristics in gas-liquid cylindrical cyclone

Lele Yang et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

Influence of slug flow on flow fields in a gas-liquid cylindrical cyclone separator: A simulation study

Xiaoming Luo et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2020)

Add to Collection

Article Multidisciplinary Sciences

Layout optimization of oil-gas gathering and transportation system in constrained three-dimensional space

Yang Liu et al.

CHINESE SCIENCE BULLETIN-CHINESE (2020)

Add to Collection

Article Engineering, Mechanical

The effects of the lower outlet on the flow field of small gas-liquid cylindrical cyclone

Weibing Zhu et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)

Add to Collection

Article Energy & Fuels

Structural Integrity Analysis of Gas-Liquid Cylindrical Cyclone (GLCC) Separator Inlet

Srinivas Swaroop Kolla et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Energy & Fuels

Computational Fluid Dynamics Modeling of Gas-Liquid Cylindrical Cyclones, Geometrical Analysis

Juan Carlos Berrio et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Engineering, Chemical

Influence of inlet angle on flow pattern and performance of gas-liquid cylindrical cyclone separator

Le Van Sy

PARTICULATE SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Engineering, Mechanical

A numerical scheme for optimizing gas liquid cylindrical cyclone separator

Amirhosein Ghasemi et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2017)

Add to Collection

Article Engineering, Chemical

Model-based experimental data evaluation of separation efficiency of multistage coarse particle classification in a zigzag apparatus

Hannes Mann et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Proceedings Paper Automation & Control Systems

Feedback Linearizing Control of a Gas-Liquid Cylindrical Cyclone

Torstein Thode Kristoffersen et al.

IFAC PAPERSONLINE (2017)

Add to Collection

Article Engineering, Chemical

Numerical Simulation on Structure Optimization of Liquid-Gas Cylindrical Cyclone Separator

Peng Chang et al.

INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING (2016)

Add to Collection

Article Mechanics

On the effect of the nozzle design on the performances of gas-liquid cylindrical cyclone separators

Rainier Hreiz et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.