☆ 4.8 Article

Direct upcycling of mixed Ni-lean polycrystals to single-crystal Ni-rich cathode materials

CHEM (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Value-creating upcycling of retired electric vehicle battery cathodes

Guannan Qian et al.

Summary: This study presents a molten-salt-based method for direct recycling of electric vehicle batteries, which can convert the waste into valuable materials with outstanding electrochemical performance. This work may open opportunities for the recycling and manufacturing of next-generation cathode materials for electric vehicle batteries.

CELL REPORTS PHYSICAL SCIENCE (2022)

Add to Collection

Editorial Material Electrochemistry

How to Maximize the Value Recovered from Li-Ion Batteries: Hydrometallurgical or Direct Recycling?

Linda Gaines et al.

Summary: Although the US has limited reserves of raw materials for EV batteries, recycling of end-of-life materials can help supplement domestic supply. Hydrometallurgical recycling plants are being constructed with expectations of profit, but profitability will decrease as cobalt content declines. Eventually, direct recycling will be developed enough to make up for this, ensuring a domestic supply of these materials.

ELECTROCHEMICAL SOCIETY INTERFACE (2021)

Add to Collection

Article Engineering, Environmental

Industrial disassembling as a key enabler of circular economy solutions for obsolete electric vehicle battery systems

Simon Gloeser-Chahoud et al.

Summary: This paper emphasizes the importance of establishing industrial dismantling systems to achieve higher levels of circular use of electric vehicle battery systems, pointing out that the current end-of-life treatment of EVBs is still relatively simple and needs further improvement.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Article Engineering, Environmental

To shred or not to shred: A comparative techno-economic assessment of lithium ion battery hydrometallurgical recycling retaining value and improving circularity in LIB supply chains

Dana Thompson et al.

Summary: Current techniques for recycling lithium-ion batteries often involve shredding as a preliminary step, resulting in lower purity and decreased economics. However, disassembly followed by delamination can retain product value and simplify downstream chemistries, with potential cost savings of up to 80%. This highlights the importance of design for disassembly in improving the circularity of LIB supply chains and retaining greater value within the system.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Closed-Loop Recycling of Lithium, Cobalt, Nickel, and Manganese from Waste Lithium-Ion Batteries of Electric Vehicles

Ka Ho Chan et al.

Summary: This study successfully recovered lithium, cobalt, nickel, and manganese from spent lithium-ion batteries, generating a new cathode material with high electrochemical performance to make batteries. Valorization of spent lithium-ion batteries enables conserving natural resources and protecting ecosystems while contributing to the circular economy.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Circularity of Lithium-Ion Battery Materials in Electric Vehicles

Jessica Dunn et al.

Summary: Batteries have the potential to reduce greenhouse gas emissions from on-road transportation significantly, but there are concerns over material production and criticality. Circular economy strategies can mitigate impacts and secure regional supplies, requiring the development of recycling and manufacturing infrastructure in each region.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Physical

Pyrometallurgical options for recycling spent lithium-ion batteries: A comprehensive review

Brian Makuza et al.

Summary: This study provides a comprehensive overview of the current status of pyrometallurgical options for recycling spent LIBs, including thermal pretreatment methods and extractive pyrometallurgical options. It summarizes recent examples of laboratory and industrial-scale recycling processes and also discusses battery recycling legislation, challenges, and future outlook for recycling LIBs.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrometallurgical Recovery of Spent Lithium Ion Batteries: Environmental Strategies and Sustainability Evaluation

Zhilin Liang et al.

Summary: The rapid development of lithium ion batteries has posed challenges in terms of disposal, leading to a necessity for efficient recovery and reutilization. Advances in hydrometallurgical methods have improved the efficiency of recycling processes, focusing on waste disposal and environmental impact.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

A perspective on single-crystal layered oxide cathodes for lithium-ion batteries

Jayse Langdon et al.

Summary: The increasing demand for lithium-ion batteries calls for higher energy density and longer cycle life. Single-crystal cathode particles have attracted intense interest due to their remarkable cyclability, but there has been no systematic analysis of the different techniques in this field thus far.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Recycling and environmental issues of lithium-ion batteries: Advances, challenges and opportunities

C. M. Costa et al.

Summary: This work provides an overview on the relevance of recycling Lithium-ion batteries (LIBs) and their environmental impact. It analyzes the components and market value of LIBs, addresses different recycling methods for critical metals like cobalt and nickel, and describes the main environmental issues associated with the production, use and end of life of LIBs for electric vehicles.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries

Haifeng Yu et al.

Summary: The study introduces a gradient Al-doped and LiAlO2-coated LiNi0.9Co0.1O2 cathode to address crystal degradation and interfacial instability, improving cycle and thermal stabilities for promising Ni-rich cathodes.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

A universal etching method for synthesizing high-performance single crystal cathode materials

Xiaotu Ma et al.

Summary: NMC cathode materials are popular for their high energy density and low cost, but concerns over stability and safety have limited their practical applications. By using a universal etching approach to synthesize single-crystal cathode materials, researchers have found significant improvements in rate performance and capacity retention compared to polycrystalline cathode materials. This alternative approach offers potential for high energy density and cycle stability in the next generation of lithium-ion batteries.

NANO ENERGY (2021)

Add to Collection

Article Energy & Fuels

Direct Recycling of Blended Cathode Materials by Froth Flotation

Tinu-Ololade Folayan et al.

Summary: The study developed an effective froth flotation process for separating cathode active materials in direct Li-ion battery recycling, achieving high grades of purity for extracted NMC111 and LMO. Additionally, it was found that solid concentration had an impact on the electrochemical performance of the materials being processed.

ENERGY TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Direct Recycling R&D at the ReCell Center

Linda Gaines et al.

Summary: The expected growth in electric vehicles will lead to an increase in end-of-life vehicle supply and lithium-ion battery recycling. The commercial recycling processes need to minimize environmental impacts while maximizing revenue and minimizing costs. The development of robust recycling technology is necessary for batteries that may not contain materials like cobalt.

RECYCLING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Increased residual lithium compounds guided design for green recycling of spent lithium-ion cathodes

Min Fan et al.

Summary: This study conducted comprehensive research on the microstructural evolution of degraded LiNi1-x-yCoxMnyO2 electrodes to propose a targeted method for recycling spent cathode materials based on increased residual lithium compounds. The separation process using only water eliminates the need for toxic organic solvents, complicated processes, and waste treatment, making it an environmentally friendly and efficient recycling strategy. The satisfactory capacity recovery of the cathode through simple sintering provides a sustainable closed-loop for spent cathodes and offers new inspiration for the design of lithium-ion battery recycling.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Single-crystal nickel-rich layered-oxide battery cathode materials: synthesis, electrochemistry, and intra-granular fracture

Guannan Qian et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode

Yujing Bi et al.

SCIENCE (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Perspective Recycling for All Solid-State Lithium-Ion Batteries

Luqman Azhari et al.

MATTER (2020)

Add to Collection

Article Electrochemistry

Study of the Reactions between Ni-Rich Positive Electrode Materials and Aqueous Solutions and their Relation to the Failure of Li-Ion Cells

Ines Hamam et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Review Chemistry, Physical

Recycling of mixed cathode lithium-ion batteries for electric vehicles: Current status and future outlook

Tyler Or et al.

CARBON ENERGY (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Recycling of spent lithium-ion batteries in view of lithium recovery: A critical review

Chunwei Liu et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Review Multidisciplinary Sciences

Recycling lithium-ion batteries from electric vehicles

Gavin Harper et al.

NATURE (2019)

Add to Collection

Review Electrochemistry

Automotive Li-Ion Batteries: Current Status and Future Perspectives

Yuanli Ding et al.

ELECTROCHEMICAL ENERGY REVIEWS (2019)

Add to Collection

Article Electrochemistry

Is Cobalt Needed in Ni-Rich Positive Electrode Materials for Lithium Ion Batteries?

Hongyang Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

A method of increasing the energy density of layered Ni-rich Li[Ni1-2xCoxMnx]O2 cathodes (x=0.05, 0.1, 0.2)

Jae-Hyung Kim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Physical

Recycling End-of-Life Electric Vehicle Lithium-Ion Batteries

Mengyuan Chen et al.

JOULE (2019)

Add to Collection

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Short process for regenerating Mn-rich cathode material with high voltage from mixed-type spent cathode materials via a facile approach

Yue Yang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Engineering, Environmental

Process for recycling mixed-cathode materials from spent lithium-ion batteries and kinetics of leaching

Li Li et al.

WASTE MANAGEMENT (2018)

Add to Collection

Review Chemistry, Multidisciplinary

A Critical Review and Analysis on the Recycling of Spent Lithium-Ion Batteries

Weiguang Lv et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Review Energy & Fuels

Current status and challenges for automotive battery production technologies

Arno Kwade et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Recycled Lithium from Simulated Pyrometallurgical Slag by Chlorination Roasting

Hui Dang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Editorial Material Chemistry, Physical

Recycling Strategies for Spent Li-Ion Battery Mixed Cathodes

Subramanian Natarajan et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Review Energy & Fuels

Key issues for Li-ion battery recycling

Linda Gaines et al.

MRS ENERGY & SUSTAINABILITY (2018)

Add to Collection

Article Chemistry, Physical

Chemical versus Electrochemical Electrolyte Oxidation on NMC111, NMC622, NMC811, LNMO, and Conductive Carbon

Roland Jung et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Add to Collection

Article Chemistry, Physical

In Situ X-ray Diffraction Study of Layered Li-Ni-Mn-Co Oxides: Effect of Particle Size and Structural Stability of Core-Shell Materials

Jing Li et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Review Chemistry, Physical

A review of blended cathode materials for use in Li-ion batteries

Satishkumar B. Chikkannanavar et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

A novel method to recycle mixed cathode materials for lithium ion batteries

Haiyang Zou et al.

GREEN CHEMISTRY (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.