☆ 4.6 Article

Molecular Dynamics Simulation of Chip Morphology in Nanogrinding of Monocrystalline Nickel

COATINGS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Study on nanoscale friction and wear mechanism of nickel-based single crystal superalloy by molecular dynamics simulations

Zongxiao Zhu et al.

Summary: The molecular dynamics method was used to simulate repeated nano-friction on a nickel-based single crystal (NBSC) superalloy. The study comprehensively analyzed various aspects including friction force, atomic displacement, wear scar morphology, subsurface defects, and potential energy to understand the friction mechanism of NBSC. The results showed that the frictional force fluctuated significantly, the coefficient of friction decreased during repeated friction, and wear scars of different phases exhibited different behaviors with increasing friction cycles.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

LAMMPS-a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales

Aidan P. Thompson et al.

Summary: LAMMPS, a classical molecular dynamics simulator released as an open source code in 2004, has gained popularity for its wide variety of particle interaction models, platform compatibility, and user control over simulation details. With contributions from numerous developers, it has grown from 50,000 lines of code to a million today, showcasing new capabilities like dynamic load balancing and quantum-accuracy machine learning interatomic potentials.

COMPUTER PHYSICS COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Molecular dynamics study on the nanoscale repeated friction and wear mechanisms of TiC/Ni composites

Min Zheng et al.

Summary: In this study, the mechanical properties of TiC/Ni composites during multiple friction processes were investigated using molecular dynamics simulation. It was found that when the grinding ball interacts with the TiC phase, the friction force is maximized and the abrasion depth is shallow. The atoms in the workpiece tend to bypass the TiC phase for displacement. During repeated friction processes, the friction force and coefficient reach maximum values, while the increment in abrasion depth decreases. The large structural defects decompose into small defects, leading to the formation of dislocation entanglement and improved wear resistance of the workpiece.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2022)

Add to Collection

Article Chemistry, Analytical

Determination of the Efficiency of Hot Nano-Grinding of Mono-Crystalline Fcc Metals Using Molecular Dynamics Method

Nikolaos E. Karkalos et al.

Summary: Abrasive processes are essential in manufacturing for producing high-quality surfaces with minimal impact on workpiece integrity. Elevated preheating temperatures can reduce forces and facilitate material removal in nanogrinding, but higher temperatures can be detrimental to workpiece integrity.

MICROMACHINES (2022)

Add to Collection

Article Chemistry, Physical

Effect of Temperature on the Deformation Behavior of Copper Nickel Alloys under Sliding

Stefan J. Eder et al.

Summary: The microstructural evolution in the near-surface regions of a dry sliding interface is studied using large-scale molecular dynamics simulations to investigate the effect of temperature on the deformation response of FCC CuNi alloys under various normal pressures. The results show that increasing the Ni content or reducing the temperature raises the energy barrier to activate dislocation activity, increasing the stress required for the transition to the next deformation regime. A 3D map of dominating deformation mechanism regimes for CuNi alloys is produced based on quantitative analysis and elimination of spatial and time dimensions from the data.

MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Atomistic simulation of creep deformation mechanisms in nickel-based single crystal superalloys

A. R. Khoei et al.

Summary: This paper investigates creep deformation mechanisms in nickel-based single crystal superalloys through two-dimensional molecular dynamics simulations, revealing various mechanisms such as gamma' precipitate shearing, micro-twinning, and diffusion-mediated climb.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Study on staged work hardening mechanism of nickel-based single crystal alloy during atomic and close-to-atomic scale cutting

ZhaoPeng Hao et al.

Summary: This paper studied the work hardening effect in the cutting process of nickel based single crystal alloys, proposed a new staged work hardening mechanism, and discussed the reasons for the change of hardening mechanism in different stages.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Study on the evolution mechanism of subsurface defects in nickel-based single crystal alloy during atomic and close-to-atomic scale cutting

Zhaopeng Hao et al.

Summary: This study investigated the evolution mechanism of subsurface defects in nickel-based single crystal alloy during ultra-precision cutting with a silicon nitride tool using molecular dynamics. It was found that increasing cutting speed can reduce the number and area of subsurface defects, improving the quality of machined parts. Different crystal orientations and cutting depths result in varying types and quantities of defects, with more defects produced in the subsurface region under the (010) 001 crystal orientation.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Manufacturing

Microscopic Study on the Mechanism of Tool Bond Wear in Cutting Ni-Fe-Cr-Co-Cu Series Nickel-Base Superalloy

ZhaoPeng Hao et al.

Summary: In this study, a molecular dynamics simulation model was established to investigate the tool wear mechanism in nickel-based alloy cutting, revealing that bond wear is the main form of tool wear with three stages: contact, adhesion, and shedding. Additionally, the formation of Ni-Si compound on the tool surface was found to reduce tool performance compared to the silicon carbide structure.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2021)

Add to Collection

Article Chemistry, Physical

Molecular dynamics study on deformation behaviour of monocrystalline GaN during nano abrasive machining

Yongqiang Wang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Mechanics

The effect of void defect on the evolution mechanisms of dislocations and mechanical properties in nickel-based superalloys by molecular dynamics simulation of real γ/γ' structures

H. Liu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Dislocation-blocking mechanism for the strengthening and toughening of laminated graphene/Al composites

Jia-Qi Zhu et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

Add to Collection

Article Physics, Condensed Matter

Study of subsurface damage of monocrystalline nickel in nanometric grinding with spherical abrasive grain

Jie Ren et al.

PHYSICA B-CONDENSED MATTER (2019)

Add to Collection

Article Engineering, Multidisciplinary

Effects of diamond tip orientation on the dynamic ploughing lithography of single crystal copper

Yongda Yan et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

A molecular dynamic study of nano-grinding of a monocrystalline copper-silicon substrate

Yixin Xu et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Engineering, Multidisciplinary

Molecular dynamics simulation of chip formation mechanism in single-crystal nickel nanomachining

Zhu ZongXiao et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2019)

Add to Collection

Article Chemistry, Physical

Molecular dynamics and experimental study on comparison between static and dynamic ploughing lithography of single crystal copper

Gaobo Xiao et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Engineering, Mechanical

Diffusion mechanism of tools and simulation in nanoscale cutting the Ni-Fe-Cr series of Nickel-based superalloy

ZhaoPeng Hao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Chemistry, Physical

Molecular dynamics research on ultra-high-speed grinding mechanism of monocrystalline nickel

Jie Ren et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of recovery and side flow on surface generation in nano-cutting of single crystal silicon

Feifei Xu et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Add to Collection

Review Automation & Control Systems

Review of molecular dynamics/experimental study of diamond-silicon behavior in nanoscale machining

Lukman N. Abdulkadir et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Deformation mechanisms in nanotwinned γ-TiAl by molecular dynamics simulation

Cao Hui et al.

MOLECULAR SIMULATION (2018)

Add to Collection

Article Automation & Control Systems

Effect of crystallographic orientation on single crystal copper nanogrooving behaviors by MD method

Yuan-Ching Lin et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

In-situ investigation of dislocation tangle-untangle processes in small-sized body-centered cubic Nb single crystals

Xinyu Shu et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanisms of subsurface damage and material removal during high speed grinding processes in Ni/Cu multilayers using a molecular dynamics study

QiHong Fang et al.

RSC ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Influence of laser nanostructured diamond tools on the cutting behavior of silicon by molecular dynamics simulation

Houfu Dai et al.

RSC ADVANCES (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Thermostat Influence on the Structural Development and Material Removal during Abrasion of Nanocrystalline Ferrite

Stefan J. Eder et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Engineering, Multidisciplinary

Molecular dynamics simulation of single crystal Nickel nanometric machining

Zhu ZongXiao et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2016)

Add to Collection

Article Chemistry, Physical

Subsurface defects structural evolution in nano-cutting of single crystal copper

Quanlong Wang et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Molecular dynamics simulation of deformation accumulation in repeated nanometric cutting on single-crystal copper

Lin Zhang et al.

RSC ADVANCES (2015)

Add to Collection

Article Automation & Control Systems

Scratching of copper with rough surfaces conducted by diamond tip simulated using molecular dynamics

Jia Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Molecular dynamic simulation for nanometric cutting of single-crystal face-centered cubic metals

Yanhua Huang et al.

NANOSCALE RESEARCH LETTERS (2014)

Add to Collection

Article Engineering, Mechanical

Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process

Saurav Goel et al.

TRIBOLOGY INTERNATIONAL (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Automated identification and indexing of dislocations in crystal interfaces

Alexander Stukowski et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

Add to Collection

Article Engineering, Multidisciplinary

Molecular dynamics simulations of thermal effects in nanometric cutting process

Guo YongBo et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2010)

Add to Collection

Article Engineering, Industrial

3D nano-scale cutting model for nickel material

Zone-Ching Lin et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.