☆ 4.6 Article

Improved Cycling Performance and High Rate Capacity of LiNi0.8Co0.1Mn0.1O2 Cathode Achieved by Al(PO3)3 Modification via Dry Coating Ball Milling

COATINGS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Enhancing surface and internal structural stability of LiNi0.8Co0.1Mn0.1O2 by yttrium phosphate dual effects

Yike Xiong et al.

Summary: YPO4-modified Ni-rich cathode materials exhibit high thermal stability and capacity retention, showing promising potential in optimizing the manufacturing of cathode materials for Li-ion batteries. The synergistic effect of Y3+ doping and LiYO2-Li3PO4 dual surface modification resolves lattice structure defects and lithium migration issues, leading to improved cycling performance.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Al2O3 coated single-crystalline hexagonal nanosheets of LiNi0.6Co0.2Mn0.2O2 cathode materials for the high-performance lithium-ion batteries

Ben Ma et al.

Summary: The study demonstrates that the hydrothermally synthesized single crystalline hexagonal nanosheets of NCM material, with controlled coating of Al2O3, exhibit improved performance and cyclic life of lithium-ion batteries due to the stable layered structure and reduced side reactions.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Chemistry, Applied

Y2O3 modification on nickel-rich LiNi0.8Co0.1Mn0.1O2 with improved electrochemical performance in lithium-ion batteries

Rui He et al.

Summary: In this study, stable LiNi0.8Co0.1Mn0.1O2 (NCM811) materials modified with Y2O3 were prepared via a wet chemical method. The microstructures and electrochemical performances of the materials were analyzed. It was found that Y2O3 modification improved the thermal stability and electrochemical properties of NCM811 materials, and 1% Y2O3 modified NCM811 showed the best cycling performance.

JOURNAL OF RARE EARTHS (2022)

Add to Collection

Article Chemistry, Physical

Improving Fast Charging-Discharging Performances of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Material by Electronic Conductor LaNiO3 Crystallites

Tongxin Li et al.

Summary: This study demonstrates the potential of using NCM811 coated with electronic conductor LaNiO3 as fast charging-discharging and high energy cathodes for Li-ion batteries. The coated NCM811 shows higher capacity and improved high rate performance, as well as enhanced cycling stability.

MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

An ultrathin solid-state electrolyte film coated on LiNi0.8Co0.1Mn0.1O2 electrode surface for enhanced performance of lithium-ion batteries

Si-Yu Yang et al.

Summary: Coating a nano-scaled layer of LiPON on the electrode surface can improve the electrochemical stability and increase the cycle life and safety of lithium-ion batteries. The study shows that the coating not only modifies the electrode-electrolyte interface but also enhances the structural stability of the particle surface.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

In-situ construction protective layer and phosphate doping synergistically improve the long-term cycle stability of LiNi0.6Co0.1Mn0.3O2

Shan Gao et al.

Summary: The wet grinding procedure explored for modifying Ni-rich layered cathodes has successfully improved their cycle stability and rate performance by introducing oxygen defects and forming protective coating layers. This study provides a useful modification strategy to enhance the stability of Ni-rich cathode materials.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Yttrium Surface Gradient Doping for Enhancing Structure and Thermal Stability of High-Ni Layered Oxide as Cathode for Li-Ion Batteries

Yang-Yang Wang et al.

Summary: The authors improved the structure and thermal stability of high-nickel layered oxides by introducing yttrium through surface gradient doping, leading to enhanced electrochemical performance. The yttrium-doped sample showed good capacity retention, potential stability, and superior thermal behavior, attributed to strong yttrium-oxygen bonding and a stable oxygen framework on the surface layer.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Improving the electrochemical performance of LiNi0.6Co0.1Mn0.3O2 cathode at high cutoff voltage by dual functions of Y(PO3)3 modification

Congcong Yue et al.

Summary: The addition of trace amounts of Y (P03)3 in LiNi0.6ComMno.302 (NCM613) material leads to higher initial discharge specific capacities and improved cycle stability.

SOLID STATE IONICS (2021)

Add to Collection

Article Chemistry, Physical

Revealing the Multiple Influences of Zr Substitution on the Structural and Electrochemical Behavior of High Nickel LiNi0.8Co0.1Mn0.1O2 Cathode Material

Kang Wu et al.

Summary: Introducing Zr into NCM811 material enhances its electrochemical performance by improving structural stability and providing a wider Li+ intercalation channel. Regulating Li/Ni mixing is beneficial for the thermal and structural stability of the material.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Materials Science, Coatings & Films

Improved thermal shock and corrosion resistance of α-Al2O3/AlPO4 coating with PAA addition

Zirui Zhao et al.

Summary: The alpha-Al2O3/AlPO4 coating fabricated at 500°C using a thermo-chemical reaction method showed superior thermal shock resistance and corrosion resistance, with no cracks appearing even after 300 thermal shock cycles. This method not only provides the possibility for the coating to keep well in service for a long time, but also offers a strategy for enhancing the thermal shock property of other ceramic coatings.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Preparation and Electrochemical Properties of LiNi2/3Co1/6Mn1/6O2 Cathode Material for Lithium-Ion Batteries

Meijie Zhu et al.

Summary: The cathode material LiNi2/3Co1/6Mn1/6O2 with excellent electrochemical performance was successfully prepared using a rheological phase method. Characterization results showed that calcination temperature and atmosphere significantly influenced the structure and performance of the material, with the sample calcinated at 800 degrees C under O-2 atmosphere demonstrating well-crystallized particle morphology and excellent electrochemical performance. This suggests that LiNi2/3Co1/6Mn1/6O2 is a promising cathode material for lithium-ion batteries.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Studies of Nickel-Rich LiNi0.85Co0.10Mn0.05O2 Cathode Materials Doped with Molybdenum Ions for Lithium-Ion Batteries

Francis Amalraj Susai et al.

Summary: This study focuses on the effects of doping high-charge cation Mo6+ into Ni-rich materials Li[NixCoyMnz]O-2 on the performance in lithium-ion batteries, showing improved cycling stability, rate capability, and impedance. Experimental results reveal the preferred substitution sites of Mo6+ in Ni and its distribution in the electrode materials.

MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Enhancing Lithium Manganese Oxide Electrochemical Behavior by Doping and Surface Modifications

Alexandru-Horatiu Marincas et al.

Summary: Research has shown that the drawbacks of lithium manganese oxide can be effectively suppressed through structure doping and surface modification approaches. Modified materials exhibit improved cyclability, better performance at high discharge rates and elevated temperatures, and an enhanced lithium ions diffusion coefficient compared to pristine samples.

COATINGS (2021)

Add to Collection

Article Chemistry, Physical

Modification of LiNi0.8Co0.1Mn0.1O2 cathode materials from the perspective of chemical stabilization and kinetic hindrance

Xugang Ren et al.

Summary: NCM811 is a promising positive electrode material for lithium-ion batteries, but faces challenges such as capacity fading and voltage decline. Research focuses on chemical stabilization and kinetic hindrance, as well as the relationship between performance degradation mechanisms and strategies.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Chemistry, Physical

Application of Ionic Liquids for Batteries and Supercapacitors

Apurba Ray et al.

Summary: This article discusses the demand for high-performance, lightweight, and low-cost electronic devices, which has prompted research into advanced electrochemical energy storage devices and technologies. The focus is on ionic liquids as electrolytes in Li-ion batteries and supercapacitors, highlighting their potential, advantages, and challenges.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Electrochemical Properties of LiNi0.6Co0.2Mn0.2O2 Cathode Materials Prepared with Different Ammonia Content

Chen Xu et al.

Summary: The content of ammonia coordination agent in the initial aqueous solution significantly impacts the morphologies and electrochemical performances of layered LiNi6Mn2Co2O2 (NCM622). Higher ammonia content leads to a more perfect spherical morphology and higher discharge capacity in NCM622. This highlights the importance of considering the hydroxide equilibrium constant and precipitation rate when chemically doping other metal ions with NCM622.

COATINGS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A Comparative Review of Metal Oxide Surface Coatings on Three Families of Cathode Materials for Lithium Ion Batteries

Thabang Ronny Somo et al.

Summary: The paper discusses the role and effect of metal oxides in enhancing the performance of cathode materials in lithium-ion batteries, covering the impact of coatings on metal ion dissolution, battery cycling life, and capacity fading. Additionally, challenges faced by spinel-type and olivine-type cathode materials, as well as the potential role of metal oxide coatings in addressing those limitations, are discussed.

COATINGS (2021)

Add to Collection

Article Engineering, Environmental

In-situ formation of hybrid Li3PO4-AlPO4-Al(PO3)3 coating layer on LiNi0.8Co0.1Mn0.1O2 cathode with enhanced electrochemical properties for lithium-ion battery

Ze Feng et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Multifunctional Integration of Double-Shell Hybrid Nanostructure for Alleviating Surface Degradation of LiNi0.8Co0.1Mn0.1O2 Cathode for Advanced Lithium-Ion Batteries at High Cutoff Voltage

Qiwen Ran et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Electrochemistry

Surface architecture decoration on enhancing properties of LiNi0.8Co0.1Mn0.1O2 with building bi-phase Li3PO4 and AlPO4 by Al(H2PO4)3 treatment

Zhongdong Peng et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

Yttrium modified Ni-rich LiNi0.8Co0.1 iMn0.1O2 with enhanced electrochemical performance as high energy density cathode material at 4.5 V high voltage

Meiling Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Enhanced performance of layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material in Li-ion batteries using nanoscale surface coating with fluorine-doped anatase TiO2

Mohadese Rastgoo-Deylami et al.

SOLID STATE IONICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrathin Al2O3 Coating on LiNi0.8Co0.1Mn0.1O2 Cathode Material for Enhanced Cycleability at Extended Voltage Ranges

Wenchang Zhu et al.

COATINGS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Continuous Composition Spread and Electrochemical Studies of Low Cobalt Content Li(Ni,Mn,Co)O2 Cathode Materials

JongSeok Jung et al.

COATINGS (2019)

Add to Collection

Article Engineering, Environmental

Thermochemical conversion of eggshell as biological waste and its application as a functional material for lithium-ion batteries

Chenrayan Senthil et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Enhanced cyclability and safety performance of LiNi0.6Co0.2Mn0.2O2 at elevated temperature by AlPO4 modification

Wenjie Tang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Use of Ce to Reinforce the Interface of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Materials for Lithium-Ion Batteries under High Operating Voltage

Feng Wu et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Chemistry, Physical

Enhancing the Electrochemical Performance of Ni-Rich Layered Oxide Cathodes by Combination of the Gradient Doping and Dual-Conductive Layers Coating

Qiwen Ran et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Improvement of the Cycling Stability of Li-Rich Layered Mn-Based Oxide Cathodes Modified by Nanoscale LaPO4 Coating

Xiaohui Zhang et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

From Surface ZrO2 Coating to Bulk Zr Doping by High Temperature Annealing of Nickel-Rich Lithiated Oxides and Their Enhanced Electrochemical Performance in Lithium Ion Batteries

Florian Schipper et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Electrochemistry

Effects of LaPO4 coating on the performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium ion batteries

Xiaodong Jiang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Performance of LiNi0.5Mn1.5O4 Cathode Material by YPO4 Surface Modification

Tinghua Xu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Improving the electrochemical performance of Ni-rich cathode material LiNi0.815Co0.15Al0.035O2 by removing the lithium residues and forming Li3PO4 coating layer

Zhong-Feng Tang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Metallurgy Inspired Formation of Homogeneous Al2O3 Coating Layer To Improve the Electrochemical Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material

Mingxia Dong et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Physical

Mg-Ti co-doping behavior of porous LiFePO4 microspheres for high-rate lithium-ion batteries

Jiguo Tu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Nanoscience & Nanotechnology

From Coating to Dopant: How the Transition Metal Composition Affects Alumina Coatings on Ni-Rich Cathodes

Binghong Han et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Fe-stabilized Li-rich layered Li1.2Mn0.56Ni0.16Co0.08O2 oxide as a high performance cathode for advanced lithium-ion batteries

Ting-Feng Yi et al.

MATERIALS TODAY ENERGY (2017)

Add to Collection

Article Chemistry, Physical

Enhanced electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material by ultrathin ZrO2 coating

Ji-Zhou Kong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Chemistry, Physical

Electrochemical properties of MgO-coated 0.5Li2MnO3-0.5LiNi0.5Mn0.5O2 composite cathode material for lithium ion battery

Arun Kumar et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Add to Collection

Article Chemistry, Physical

In-situ Raman spectroscopic investigation of LiMn1.45Ni0.45M0.1O4 (M = Cr, Co) 5 V cathode materials

W. Zhu et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Surface-modified Li[Li0.2Ni0.17Co0.07Mn0.56]O2 narioparticles with MgF2 as cathode for Li-ion battery

Shuwei Sun et al.

SOLID STATE IONICS (2015)

Add to Collection

Article Chemistry, Physical

Improve the structure and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode material by nano-Al2O3 ultrasonic coating

Yanping Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Chemistry, Physical

PO43- polyanion-doping for stabilizing Li-rich layered oxides as cathode materials for advanced lithium-ion batteries

H. Z. Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Chemistry, Physical

Synthesis, characterization, and electrochemistry of cathode material Li [Li0.2Co0.13Ni0.13Mn0.54]O2 using organic chelating agents for lithium-ion batteries

Taolin Zhao et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Electrochemistry

Synthesis and electrochemical properties of CaF2-coated for long-cycling Li[Mn1/3Co1/3Ni1/3]O2 cathode materials

Ke Xu et al.

ELECTROCHIMICA ACTA (2012)

Add to Collection

Article Electrochemistry

Electrochemical performance of LaF3-coated LiMn2O4 cathode materials for lithium ion batteries

Quanqi Chen et al.

ELECTROCHIMICA ACTA (2012)

Add to Collection

Article Electrochemistry

Significant improvement of electrochemical properties of AlF3-coated LiNi0.5Co0.2Mn0.3O2 cathode materials

Kai Yang et al.

ELECTROCHIMICA ACTA (2012)

Add to Collection

Article Chemistry, Physical

Ni3(PO4)2-coated Li[Ni0.8Co0.15Al0.05]O2 lithium battery electrode with improved cycling performance at 55 °C

Dong-Ju Lee et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Electrochemistry

Synthesis, thermal, and electrochemical properties of AlPO4-coated LiNi0.8Co0.1Mn0.1O2 cathode materials for a Li-ion cell

J Cho et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection

Article Electrochemistry

Comparison of overcharge behavior of AlPO42-coated LiCoO (and LiNi)(Co)(Mn)(O)(0.8)(0.1)(0.1)(2) cathode materials in Li-ion cells

J Cho et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.