☆ 4.7 Article

Thermal process and material flow during dissimilar double-sided friction stir spot welding of AZ31/ZK60 magnesium alloys

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Multi-layer deposition mechanism in ultra high-frequency pulsed wire arc additive manufacturing (WAAM) of NiTi shape memory alloys

W. C. Ke et al.

Summary: UHFP-GTAW-WAAM was used to fabricate thin walls of NiTi shape memory alloys. A three-dimensional numerical model was developed to simulate the deposition process, and an improved free surface tracing method was proposed. The study revealed that the vibration of the molten pool induced by UHFP current power can improve the microstructure of the parts.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Flat friction stir spot welding of low carbon steel by double side adjustable tools

Xiaopei Wang et al.

Summary: Flat friction stir spot welding (FSSW) technique successfully eliminated the keyhole and hook shape in welding 2 mm low carbon steel plates, resulting in improved joint performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Simultaneously improved mechanical and thermal properties of Mg-Zn-Zr alloy reinforced by ultra-low content of graphene nanoplatelets

Xian Du et al.

Summary: Adding ultra-low content of graphene nanoplatelets to Mg-Zn-Zr (ZK60) alloys improves the impact toughness and tensile strength of the composites significantly. The reinforcement also enhances thermal conductivity and expands the potential applications of the materials.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Optics

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

Wenchao Ke et al.

Summary: This paper presents a numerical framework and methods to suppress porosity formation in laser beam oscillating welding. The study found that porosity decreased and was fully inhibited when using an infinity-oscillating path with a frequency of 200 Hz. The developed multi-physics model aids in understanding keyhole-induced porosity formation during laser beam oscillating welding of 5A06 aluminum alloy.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

High-strength Fe/Al dissimilar joint with uniform nanometer-sized intermetallic compound layer and mechanical interlock formed by adjustable probes during double-sided friction stir spot welding

Xiaopei Wang et al.

Summary: A high-strength Fe/Al dissimilar joint was successfully fabricated using double-sided friction stir spot welding with adjustable probes, which introduced strong mechanical interlocks at the interface and a uniform IMC layer. The 30 nm IMC layer composed of a ternary phase of Al?Fe?Si, induced by fresh surface from the adjustable probes, resulted in a high-strength welded joint. This novel technique was effective and productive for joining dissimilar materials.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Modified constitutive equation by using phase field simulation of dynamic recrystallization in friction stir welding

Chunliang Yang et al.

Summary: This study provides a deep insight into the relationship between flow stress, temperature, and strain rate in friction stir welding by integrating phase-field simulation of dynamic recrystallization. It introduces a modified constitutive equation considering the DRX softening effect to improve the prediction accuracy in FSW process modeling. The analysis quantitatively evaluates the variation of dislocation density and stress, ultimately enhancing the understanding of the process mechanism.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the gap width in AZ31 magnesium alloy joints obtained by friction stir welding

Fernanda Rocha Chiuzuli et al.

Summary: For thin AZ31 magnesium alloy sheets welded using Friction Stir Welding in butt joint configuration with gap width up to 1.15 mm, the gap width affects weld thickness but not microstructure and hardness. Within a certain range, there is a slight decrease in Ultimate Tensile Strength with increasing gap width.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical simulation of thermal cycle and void closing during friction stir spot welding of AA-2524 at different rotational speeds

Jiangtao Xiong et al.

Summary: A 3D and coupled numerical model was developed for RFSSW of 2524-T3 aluminum alloy, showing that an increase in rotational speed leads to higher heat production, lower stress, and reduced propensity for internal voids at 2800 rpm.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Engineering, Manufacturing

CFD modelling of ultra-high rotational speed micro friction stir welding

Renju Mohan et al.

Summary: This study focuses on ultra-high rotational speed micro friction stir welding, investigating the heat generation, temperature distribution, and material flow during the welding process through numerical simulations. The findings reveal that at high rotational speeds, plastic heat generation plays a more significant role, while partial melting does not occur.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Interface strengthening in dissimilar double-sided friction stir spot welding of AZ31/ZK60 magnesium alloys by adjustable probes

Xiaopei Wang et al.

Summary: In this study, dissimilar welding of AZ31/ZK60 magnesium alloys was successfully achieved using double-sided friction stir spot welding with adjustable probes, resulting in a strong joint with improved properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Industrial

Influence of tool thread pitch on material flow and thermal process in friction stir welding

Z. Sun et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Recent research progress in solid state friction-stir welding of aluminium-magnesium alloys: a critical review

Virendra Pratap Singh et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of Microstructure, Mechanical Properties, and Numerical Modeling of Ti6Al4V Joints Produced by Friction Stir Spot Welding

F. A. Garcia-Castillo et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Flat friction stir spot welding of AZ31B magnesium alloy using double side adjustable tools: microstructure and mechanical properties

Xiaopei Wang et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2020)

Add to Collection

Article Chemistry, Physical

Modeling the dissimilar material flow and mixing in friction stir welding of aluminum to magnesium alloys

Chunliang Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

CFD modelling of friction stir welding (FSW) process of AZ31 magnesium alloy using volume of fluid method

A. F. Hasan

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Automation & Control Systems

Heat transfer modeling of dissimilar FSW of Al 6061/AZ31 using experimentally measured thermo-physical properties

Amit Kumar Singh et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Friction stir spot welding of SPCC low carbon steel plates at extremely low welding temperature

Y. F. Sun et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Automation & Control Systems

Double-sided friction stir spot welding of steel and aluminum alloy sheets

Xiaochong Lyu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Refill friction stir spot welding of 5083-O aluminum alloy

Zhiwu Xu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Engineering, Manufacturing

A numerical model of pin thread effect on material flow and heat generation in shear layer during friction stir welding

Z. Sun et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection

Article Engineering, Manufacturing

Computational Fluid Dynamics Modeling on Steady-State Friction Stir Welding of Aluminum Alloy 6061 to TRIP Steel

Xun Liu et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Towards magnesium alloys for high-volume automotive applications

William J. Joost et al.

SCRIPTA MATERIALIA (2017)

Add to Collection

Article Engineering, Manufacturing

Transient model of heat transfer and material flow at different stages of friction stir welding process

L. Shi et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical simulation of ultrasonic field and its acoustoplastic influence on friction stir welding

L. Shi et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Engineering, Manufacturing

The effect of the welding parameters and tool size on the thermal process and tool torque in reverse dual-rotation friction stir welding

L. Shi et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

Add to Collection

Article Engineering, Manufacturing

A method for double-sided friction stir spot welding

Chase D. Cox et al.

JOURNAL OF MANUFACTURING PROCESSES (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications

J. Hirsch et al.

ACTA MATERIALIA (2013)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Thermo-mechanical Modelling of Friction Stir Welding Process

Xiaocong He

ADVANCED TECHNOLOGIES IN MANUFACTURING, ENGINEERING AND MATERIALS, PTS 1-3 (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Modelling two-phase flow in porous media at the pore scale using the volume-of-fluid method

Ali Q. Raeini et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Material flow and microstructural evolution during friction stir spot welding of AZ31 magnesium alloy

W. Yuan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Transient Heat and Material Flow Modeling of Friction Stir Processing of Magnesium Alloy using Threaded Tool

Zhenzhen Yu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

Add to Collection

Article Engineering, Industrial

Hook formation and mechanical properties in AZ31 friction stir spot welds

Y. H. Yin et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)

Add to Collection

Article Engineering, Industrial

Effect of temperature, strain rate and fibre orientation on the plastic flow behaviour and formability of AZ31 magnesium alloy

C. Bruni et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling of flow stress characterizing dynamic recrystallization for magnesium alloy AZ31B

Juan Liu et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

Add to Collection

Article Engineering, Industrial

Experimental and numerical investigation of the plunge stage in friction stir welding

S. Mandal et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Three-dimensional heat and material flow during friction stir welding of mild steel

R. Nandan et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding

R Nandan et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)

Add to Collection

Review Engineering, Industrial

A review of laser welding techniques for magnesium alloys

X Cao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)

Add to Collection

Article Engineering, Industrial

3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile

PA Colegrove et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.