4.5 Article

Adsorption of Cd(II) on mesoporous Al2O3 prepared from high-aluminum fly ash

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Synthesis of geopolymers based on mechanically activated low-calcium iron-rich fly ash

Alexander M. Kalinkin et al.

Summary: The study found that mechanically activated low-calcium iron-rich fly ash geopolymers have higher compressive strength, increased reactivity, and higher iron oxide content compared to geopolymers made from initial fly ash. The inclusion of Fe in the geopolymerization process through mechanical activation improved the overall strength of the geopolymers.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2022)

Review Engineering, Chemical

Aluminum extraction technologies from high aluminum fly ash

Yajing Gao et al.

Summary: The review introduces the features of high-alumina fly ash and aluminum recovery technologies, comparing the merits and drawbacks of alumina extraction technologies in terms of extraction mechanisms and equipment requirements. It finds that predesilicating-sodium carbonate activation-acid leaching is a promising method for achieving multimetal synergistic extraction.

REVIEWS IN CHEMICAL ENGINEERING (2021)

Article Environmental Sciences

Utilization of coal fly ash in China: a mini-review on challenges and future directions

Yang Luo et al.

Summary: The rapid economic development in China has led to a large demand for energy, resulting in thermal power plants producing a significant amount of coal fly ash, causing severe environmental pollution. This paper outlines the current production and utilization status of CFA in China, highlights the challenges facing sustainable utilization during the country's economic transformation, and proposes viable directions for future CFA utilization.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Environmental Sciences

Removal of Cadmium from Contaminated Groundwater Using a Novel Silicon/Aluminum Nanomaterial: An Experimental Study

Hanghang Zhao et al.

Summary: A novel eco-friendly adsorbent was synthesized using coal fly ash, significantly enhancing the adsorption capacity for Cd2+. Functional groups of Na-O and Fe-O were found to be beneficial for the removal of Cd2+. The adsorption efficiency of the adsorbent remained high even after two regeneration cycles, showing potential for high-performance Cd2+ removal.

ARCHIVES OF ENVIRONMENTAL CONTAMINATION AND TOXICOLOGY (2021)

Review Environmental Sciences

A state-of-the-art review on wastewater treatment techniques: the effectiveness of adsorption method

Ruhma Rashid et al.

Summary: Water contamination from toxic pollutants like dyes, heavy metals, and surfactants has become a global challenge, leading to increasing efforts to develop effective wastewater treatment techniques. Various methods such as chemical oxidation, physical adsorption, and biological treatments have been recognized. Among these, adsorption is considered a simple, sustainable, cost-effective, and environmentally friendly technique for wastewater treatment, but further research and development are needed for practical implementation in a wide range of applications.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Engineering, Chemical

Micro-structural evolution of high aluminium fly ash enhanced by microwave heating to accelerate activation reaction process

Tu Hu et al.

Summary: Na2CO3 was used as an activator for roasting and activating high aluminium fly ash (HAFA) via conventional heating in this study. The use of microwave roasting technology was found to significantly improve the activation process of HAFA, with a notable increase in aluminium leaching rate while reducing both roasting time and temperature. Additionally, microwave heating led to a higher degree of breakage in mullite particles compared to conventional heating methods.

POWDER TECHNOLOGY (2021)

Review Green & Sustainable Science & Technology

A review on conventional and novel materials towards heavy metal adsorption in wastewater treatment application

Wai Siong Chai et al.

Summary: Wastewater treatment is still a critical issue globally, and the removal of heavy metals is of utmost importance. Adsorption is the most common technique, with activated carbon being the traditional adsorbent, but facing challenges in separation and cost. Novel materials show competitiveness with excellent attributes like large surface area and high chemical inertness, presenting a promising future for heavy metal adsorption in wastewater treatment.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Recent advances in activated carbon modification techniques for enhanced heavy metal adsorption

Mariana Mariana et al.

Summary: Contamination of water with heavy metals is a global issue, and activated carbon has drawn attention for its high adsorption capacity against heavy metals. Recent advances have focused on modifying activated carbon to improve its adsorption performance through physical, chemical, organic, and inorganic loading techniques.

JOURNAL OF WATER PROCESS ENGINEERING (2021)

Article Engineering, Environmental

Circular economy based landfill leachate treatment with sulphur-doped microporous biochar

Sabolc Pap et al.

Summary: By synthesizing a sulfur functionalized microporous biochar from abundant biomass waste material, the selective removal of Pb(II) heavy metal from landfill leachate was achieved with an efficiency approaching 99.9%, demonstrating high selectivity and applicability of the biochar.

WASTE MANAGEMENT (2021)

Article Engineering, Environmental

High exposure effect of the adsorption site significantly enhanced the adsorption capacity and removal rate: A case of adsorption of hexavalent chromium by quaternary ammonium polymers (QAPs)

Lili Fang et al.

Summary: The study developed novel quaternary ammonium polymers with high density adsorption sites for rapid selective removal of Cr(VI) from water, showing significantly higher adsorption capacity and rate compared to Cr(VI)-imprinted polymers. The high exposure effect of the adsorption site provides valuable guidance for designing rapid selective adsorbents for removing and reclaiming Cr(VI) from wastewater.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Construction & Building Technology

Alkali-Activated Controlled Low-Strength Material Utilizing High-Calcium Fly Ash and Steel Slag for Use as Pavement Materials

Thanakorn Chompoorat et al.

Summary: The study found that incorporating slag in alkali-activated CLSM can enhance strength, expedite setting time, and decrease bleeding rate. A mixture with up to 20% slag content of fly ash is recommended for pavement applications. Preliminary investigation into economic and environmental impacts was also conducted.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

Review Cell Biology

The adverse impact of cadmium on immune function and lung host defense

Daren L. Knoell et al.

Summary: Cadmium, a toxic heavy metal primarily released through industrial processes, enters the food chain and adversely affects organs like the kidneys, bones, vasculature, and lungs. Despite extensive studies on cells and animal models, the impact of cadmium on human immune function remains poorly understood. More research is needed to understand how chronic exposure to cadmium negatively impacts human health.

SEMINARS IN CELL & DEVELOPMENTAL BIOLOGY (2021)

Review Materials Science, Multidisciplinary

Fly ash-based adsorbent for adsorption of heavy metals and dyes from aqueous solution: a review

Uyiosa Osagie Aigbe et al.

Summary: The study examined the use of fly ash-based adsorbents for removing heavy metals and dyes from wastewater, finding that Langmuir's and Freundlich's isotherm models were effective in describing the sorption process, with the pseudo-second-order model suitable for elucidating the kinetic process. Recommendations for future prospects include enhancing adsorption capacity and effectiveness of fly ash through innovative technologies such as nanofiber technology.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Review Engineering, Environmental

Leachability and adverse effects of coal fly ash: A review

Nannan Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Environmental

Removal of cationic and anionic dyes from aqueous phase by Ball clay - Manganese dioxide nanocomposites

K. Thirumoorthy et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Green synthesis of zeolite 4A using fly ash fused with synergism of NaOH and Na2CO3

Liyun Yang et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Environmental Sciences

Tracing anthropogenic cadmium emissions: From sources to pollution

Zengwei Yuan et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Article Engineering, Environmental

Synthesis and adsorption behavior of mesoporous alumina and Fe-doped alumina for the removal of dominant arsenic species in contaminated waters

N. Inchaurrondo et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Article Environmental Sciences

Cadmium removal from simulated groundwater using alumina nanoparticles: behaviors and mechanisms

Neel Kamal Koju et al.

ENVIRONMENTAL POLLUTION (2018)

Article Engineering, Environmental

Green synthesis of mesoporous gamma-Al2O3 from coal fly ash with simultaneous on-site utilization of CO2

Feng Yan et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Article Materials Science, Multidisciplinary

Synthesis and characterization of silver-loaded mesoporous alumina antibacterial agents by hydrothermal and adsorptionmethods

Huajun Chen et al.

BULLETIN OF MATERIALS SCIENCE (2018)

Review Engineering, Environmental

Research and industrialization progress of recovering alumina from fly ash: A concise review

Jian Ding et al.

WASTE MANAGEMENT (2017)

Review Chemistry, Multidisciplinary

Modelling and Interpretation of Adsorption Isotherms

Nimibofa Ayawei et al.

JOURNAL OF CHEMISTRY (2017)

Article Green & Sustainable Science & Technology

Preparation of an Aluminum and Iron-Based Coagulant From Fly Ash for Industrial Wastewater Treatment

Kai Hu et al.

CLEAN-SOIL AIR WATER (2017)

Article Chemistry, Applied

Synthesis of mesoporous alumina with tunable structural properties

Wei Wu et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2015)

Article Engineering, Environmental

Synthesis of amino-functionalized mesoporous alumina with enhanced affinity towards Cr(VI) and CO2

Weiquan Cai et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Proceedings Paper Engineering, Manufacturing

Resourcing Utilization of High Alumina Fly Ash

Junmin Sun et al.

ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3 (2013)

Article Materials Science, Multidisciplinary

Synthesis and Characterization of Mesoporous Alumina via a Reverse Precipitation Method

Y. S. Wu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)

Article Engineering, Chemical

On the use of linearized pseudo-second-order kinetic equations for modeling adsorption systems

Mohammad I. El-Khaiary et al.

DESALINATION (2010)

Article Engineering, Environmental

Stability of metal oxide nanoparticles in aqueous solutions

Chih-ping Tso et al.

WATER SCIENCE AND TECHNOLOGY (2010)

Article Chemistry, Applied

Tailored mesoporous alumina prepared from different aluminum alkoxide precursors

M. May et al.

JOURNAL OF POROUS MATERIALS (2007)

Article Chemistry, Applied

Self-assembly synthesis of organized mesoporous alumina by precipitation method in aqueous solution

Zhao Ruihong et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2006)

Article Materials Science, Ceramics

Infrared spectroscopic study of sol-gel derived mixed-metal oxides

CM Parler et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2001)